2000 - 2B10NR: hard disk at startup error...

Similar Questions

• Smart Hard Disk 1 301 error

  on swicth on the laptop doesn't have an error occuerd that smart check... 301

  I'm tring to install win 8.1 but in "where do you want to install windows?" it an error message "windows cannot be installed in partition disk 0.

  Hello

  Smart disk error suggest falling/hard disk failure. You may need to replace it with a new one. If your computer is under warranty, HP will send free replacement.

  Contact HP: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  You will need new HARD drive to reinstall Windows successfully.

  Order of HP's USB recovery if you do not have a recovery media created with you & want to factory reset after replacement.
  http://support.HP.com/us-en/document/bph07143

  Concerning

  Visruth

• HARD disk i/o error

  I have computer vpceb26fg laptop sony vaio.

  The last time I have shut down my pc after seeing the movie, I heard some unusual noise from my internal hard drive.
  After listening to the sound, I closed the pc, the stop was slower than before.

  The next time you start same sound came and the pc has become much slower. I thought backup but I have a lot of backup, or it may hang. So thought to close and keep for a while.

  At the next startup, it displays "no found bone." Then the next time it displays "an IO error has occurred."

  Please help, I am a student, and a large number of projects have been stored inside.

  Age - 3 years
  Country - India

  Hi nayaktuhin,

  First of all, please provide unit model.  Regarding NO OS FOUND, please check the bios to see if hard drive is detected on the general tab.  If this isn't the case, then it is a bad hard drive.  It is necessary to service.  If it is detected, then see if you are able to enter the vaio recovery console using run material diag with F10.  First of all restart the computer and immediately start typing F10 key until the Modify the Boot Options screen. Change Startup Options screen, press the Enter key.  Then choose hardware diag.  If fails, then perform the maintenance.  If no problem found, so please try to reinstall windows using F10.  But if you have data, please backup first before reinstalling windows.

   

  Nick-

• Seagate Goflex desktop hard disk... error 10...

  My 1 year old Seagate Go flex desk hard drive can be more recognized by my device manager. Right click and following the guests either reinstall the driver or update driver has failed. After this title, a code 10 error message states that the driver has been updated, but there are other problems. Somebody help... 3 TB of data hangs in limbo

  My 1 year old Seagate Go flex desk hard drive can be more recognized by my device manager. Right click and following the guests either reinstall the driver or update driver has failed. After this title, a code 10 error message states that the driver has been updated, but there are other problems. Somebody help... 3 TB of data hangs in limbo

  It works on another computer?  Even one he has never been connected to?

  You have backups?

• External hard disk i/o error

  I have a 1 terrabyte external drive that has suddenly stopped working with my Windows 7 PC... I tried on my friends MacBook and it worked...? Obviously, the file format is wrong, how to operate on my PC again without shaped as the info is valuable

  Please repost your question in the Forums Windows7: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where Windows7 experts will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• N file Windows vista hard disk errors

  How can I find and repair hard disk and file errors n corrupted files and files corrupted on my pc windows vista my self

  A prompt by right clicking and select "Run as Administrator" and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
  For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
  Fujitsu utilities: http://www.fujitsu.com/us/services/computing/storage/hdd/support/utilities.html
  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT

  Also, run the command SFC /SCANNOW. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  At the command prompt, enter: SFC/scannow

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• flashing screen, power button fails (error of hard disk startup, seen many posts have this)

  I thought it would be the best forum page to post, but in any case I had trouble with these two things. The first is this random/flicker flashing, screen tapping the top of the screen could delay, but this is very random and makes sometimes standby extended or even restart more rare. I don't think overheatiing is because it looks cool enough. Very random though sometimes it happens not every day or a few days.

  The power button is very recent, it turns that if I do something such as unplug it or open/close the screen as I've seen, really don't know where these two could come, but this laptop is second-hand on ebay with a new OS installed.

  The HARD drive error is common so I saw, so I can deal with it. The usual startup error, a reboot solves this problem and it starts to load normally, have not seen all the patches, in addition to a clean wipe I don't want nessiserally to do.

  A few things you might want to know:

  OS: Windows 7 Edition home premium

  Quad core i5

  graphics card intel integrated (use an ATI mobility Radeon HD 5650)

  Just ask if something else should be, thank you.

  I suggest to retrieve what you saved on your laptop and replace the HARD drive, you now have. It seems that the HARD drive, you may be out of any day. Make sure the replacement HARD drive is not too big.

  THX

• Error on startup scan hard disk

  

  seal here is the error that I got when I did a scan of the hard disk bios... but I have no problem, the hard drive works fine... the only problem is that when the windows 7 is started it takes at least 3-4 minutes for programs to function normally... for example when I started the google chrome it will not show at least 1.2 minutes and after it opens but will not respond as I said it would take at least 3-4 minutes to function normally...

  the other thing that is at the right end of the computer where the HDD I noticed get warm enough even in normal use (I mean the Internet surfing)... any help in this would be very appreciated... My doubt is that my drive is dying on semi-bas has been a year and a half since I have this Dell laptop (i3, 6 gb, 500HDD) N5050

  Note: I have disabled all programs to start msconfig, so this isn't the issue of the slow

  Danny,

  Yes, you can replace the 500 GB drive with what anyone up to 2 TB. If you have created a recovery disk, you can reload with it.

• T1200XE error fall on hard disk 0 initialization

  Hello!

  I just bought an older T1200XE. When I start the laptop, it prints the message "error initializing hard disk 0" after the memory test, (a few seconds). I have to start with a floppy disk BACK.

  If I run FDISK, after awhile, it says 'Disc read error fixed', but if I run FDISK/status it shows me the disk of 20 MB. I downloaded FreeDOS and the FDISK, including in this OS says "controller error".

  I have an another T1200XE and this is exactly the same!
  I can't believe that two controllers or hd is dead!

  It may be possible that the free battery CMOS have erased the BIOS, but, how can I access the BIOS and configure the 20 MB HD? any idea? The setup1.exe program do not have a HD section...

  Help please!

  Thank you to.

  Hello

  Press F1 at startup to enter the Bios.

  http://FTP.Toshiba.ca/support/TechSupport/TSBs/all/-TSB000733.htm

• Qosmio F20 - integrated HARD disk error

  My F29 took a very heavy today around the area of the HARD drive on the right forward, while my children played. Basically, I'm saying that when it hit it eclipsed the panal speaker close to the screen.

  For some time he continued to work but about 10 minutes later I got a blue screen with a load of text and then it is just rebooted.

  During the startup of the screen, an error come saying 'built-in HARD drive error... Now, I checked the connection, and they seem pretty solid. can I do to get my system working again?

  Thanks in advance
  J

  Hello

  Your HARD drive is perhaps a pity
  Can you see that the drive listed in the BIOS?
  Are you able to reinstall the OS?

  You should first check this.
  You could also test the HARD drive by using the drive fitness test tool:
  http://www.HitachiGST.com/HDD/support/download.htm

  This will check the disk on some points.

  But if the HARD disk is damage need you a new!

• Satellite M40 does not start from hard disk - read error

  "I push the button - briefly see the In Touch with tomorrow TOSHIBA screen - then ' + a disk read error occurred press Ctrl Alt Del to restart +".

  I control alt delete brings me briefly on the screen TOSHIBA where I can choose either F2 or F12.

  Do I need a startup disk and where can I get one in order to boot from the CD ROM?
  Do I try to get into the Satellite M40 product Recovery DVD-ROM - this concern for me as the hard drive will be reformatted and all data will be lost.

  I'm stuck please help!

  Hello!

  If you enter the product recovery disc, Windows will be relocated and will be erasing all data on the HARD drive.

  I think that your HARD drive is damaged. You can check this with the Drive Fitness Test. Here you can download:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.

  By the way: you can save the data on the HARD drive, when you put it in a box external HARD disk. Then you can save the data on another PC, if the HARD drive is ok and have no errors.

  Good bye

• SMART hard disk error after replacing HD

  Hello!

  I SO hope that this someboidy is able to help me.

  I'm NOT a novice but I am confused.

  I replaced with the same model HD HD CQ58 provided with COMPAQ because the old HD was shot - how it happened escapes me.

  Anyhoo, after screwing a new HD I wanted to put OS on it, but I get the following error just after pressing set button / stop:

  SMART disk error

  INTELLIGENT drive control has detected an imminent failure. So no los data, please backup the content immediately and run the system diagnostics hard drive.

  Hard drive 1 (301)

  F2 System Diagnostics

  ENTER - Continues start

  For more information, please visit: www.hp.com/go/techcenter/startup

  I will return the LINK later.

  First of all, I pushed ENTER. What has emerged is:

  Not found boot device

  Please install an operating system on your hard drive

  Hard drive (3FO)

  F2 System Diagnostics

  For more information, please visit: www.hp.com/go/techcenter/startup

  I pressed F2 and this is what happens:

  I get the diagnostics Menu.

  Version 1.6.0.0 - BIOS

  For more information, please visit: www.hp.com/go/techcenter/PCDiags

  Memory test

  Check the hard disk

  Language

  Output

  I pressed Hard Drive Test is the "Quick Check" and that is the message I get:

  INTELLIGENT control: NOT AVAILABLE

  DST short: NOT AVAILABLE

  ==============================

  For more information, please visit: www.hp.com/go/techcenter/PCDiags

  I tried the LINK, it does not exist.

  I also went in the Boot Options in the BIOS to boot from a USB and put the USB HD in the first place.

  When I restart it does not recognize a USB key. I tried Windows 8 and UBUNTU which ususally works on all the machines I've fixed so far.

  No chance whatsoever.

  As I mentioned earlier:

  I'm puzzled.

  I have no recovery CD and cannot make one because I'm not running Win8 on any of my PC.

  Thus, any suggestions?

  Help, please

  Thanks in advance

  Henry of Kai

  First of all:

  Thank you all very much for taking the time and you answer!

  And now, for what happened after I did all what has been proposed:

  Nothing.

  The message remained the same.

  Still no hard drive (even if it was new)

  Then I took a hard drive to work with Win7 on it from another machine, put it in the Compaq and... nothing.

  I tried the USB with Win8 (NTFS with Rufus) does not.

  I don't know why, I tried again, but when I used the same USB with UBUNTU Live - 14.04. on that I had taken or tried before... He recognized at startup.

  Weird hard drive wiped completely since it was not recognized by the BIOS (one with Win7 on it... data paths but I had backup ).

  So, now I'm running the faithful Tahr on the Compaq and it works fine.

  I will try to put the original Win8 on it, but the system doesn't seem like more since USB NTFS NTFS are not recongised at startup.

  Well Anyhoo, I got the machine to work.

  Would have been nice to know what was wrong with him to solve future problems, but at least I had to register in this forum

  So I could bore you guys with questions in the future.

  Take care

  Kai

• Try to add a printer, get the 0x000003e7 error code, event log indicates block defective hard disk.

  Original title: try to add a printer, get error code OxOOOOO3e7, event log indicates block defective hard disk.

  I have tried disk cleaner, no help

  Hi 2012mike,

  (1) what is the number of brand and model of your printer?

  (2) what has been the result of chkdsk?

  It is sufficient to indicate the complete error message you receive.

  Please provide the details of the event logs.

  Method 1: Run the fixit available in ink below

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

  Method 2: Clean boot the computer and then try to install the printer

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows hard disk error message

  I just got a strange error message that popped up while I was surfing around Facebook.  Before you do anything, I want to be sure that it is legitimate and not somebody trying to make me install a virus or something like that.  And if it is legitimate, I want to know what I would do to this topic.

  The error message says:

  "Windows has detected a hard disk problem.

  Back up your files immediately to prevent loss of information, and then ask the computer manufacturer to determine if you need to repair or replace the disk. »

  Then it gives me two options:

  "Start the backup process."

  "Ask me later".

  If the drive fails before the following caveat, you may lose all the programs and documents on the disk. »

  So, if I click on the button "Show invisible characters", he says:

  "For immediate action."

  Because a disk failure will make you lose all programs, files and documents on the disk, you should back up your important information immediately.  Try not to use your computer until you have repaired or replaced the hard drive.

  Which drive is a failure?

  The following hard disks are fault condition:

  Name of the disk: Seagate FreeAgent XTreme

  Volume: I:\ »

  I am running Windows Vista 64-bit and the hard drive in question is a disk Seagate external, as indicated by the error message.  Also I screenshotted the message box if this description was not good enough.

  Hello

  Disk problems can take seriously very quickly so I carefully check the disc now and do not forget
  to keep redundant backups of your important data (use several methods).

  Inside the Windows - Regular or Safe Mode (repeatedly press F8 as you start).

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  GOLD:

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ----------------------------------------------------

  For even better and more efficient to check:

  At the Recovery Console prompt (if you have one) or a Vista/Windows
  disc 7 - If you do not have a Vista/Windows 7 disk you can borrow a friend (it must be the same
  32 or 64 bits and they are not protected against copying) or make a. Also your system manufacturer will sell the
  physical disks cheap since you already own windows.

  Chkdsk /f /r

  RESET

  After k and before space / f and before.

  sfc/scannow

  RESET

  Space after c and before.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  ----------------------------------------------------------------

  Go to settings/settings F2 (BIOS/CMOS) often as you start so watch the screen as you start. Define the
  Start the command of CD/DVD disks of Windows (Vista or Windows 7 If you have installed.)
  Be sure to set in when.

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  =====================================

  If CheckDisk is unable to fill as above:

  (The old 302602 links isn't now valid for Diagnostics links).

  Manufacturer diagnostic utilities - run one to your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

  Corrected list dated 06/09/2010

  Fujitsu hard drives: utility of diagnosis here
  http://www.Fujitsu.com/EMEA/products/HDD/

  Hitachi hard drives: utility of diagnosis here
  http://www.HitachiGST.com/support/downloads/

  IBM hard drives: use Hitachi utility *.

  Toshiba hard drives: use Hitachi or Maxtor utilities

  Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
  http://www.Seagate.com/www/en-us/support/

  Quantum hard drives: use the Maxtor utilities

  Seagate hard drives: here Diagnostic utilities
  http://www.Seagate.com/www/en-us/support/downloads

  Conner hard drives: use the Seagate utilities

  Hard drives Samsung: utility of diagnosis here
  http://www.Samsung.com/global/business/HDD/

  Hard drives Western Digital: utility of diagnosis here
  http://support.wdc.com/product/download.asp?lang=en
  Trial versions of one of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 Pro repairs hard disk errors

  My hard drive had errors and corrupt sectors.  I ran the tool to fix my hard drive and now need to repair the operating system.  I am running windows 7 pro legal copy of course as always.  What is the best way to repair windows 7 without having to redo my computer everything and start again.  I know that there are some missing files due to hard disk errors because strange things are happening now and some things do not work properly.

  E-mail address is removed from the privacy *.

  Trevor Walsh

  Try to repair the Installation of Windows 7

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. click on the link to repair list system in the System Recovery Options recovery tools.

  More information and a how to guide:
  http://pcsupport.about.com/od/toolsofthetrade/SS/Windows-7-startup-repair.htm

  If this does not solve it:

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD. If you are prompted, press any key to start Windows from the installation disc.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. Select command prompt and try the following commands (one command might work, or you may need to use several commands according to the exact problem):
   
  Bootrec /fixMBR
  Bootrec /fixBoot
  Bootrec /rebuildBCD

  Note: there is a space before the /.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses