2010 update of features/fixes to new OTA A2010-a-t_S257_160125

Similar Questions

• What this new update will be fixed?

  What this new update will be fixed?

  In what way?

• HP 15-ab029tx: UPDATE: HP Support fixed keyboard problem giving Me a new

  Original problem:

  Playing some games like need for speed or any game, Assassins Creed, counter-strike, Spiderman with WASD controls. After 35-45 minutes the keyboard starts to malfunction. The character starts to move randomly left direction without pressing me a key and to stop it I push on it was ' hard button.

  No problem in games, not because of synaptics Smart Sense. I've owned a lot of portable (3) to be exact, and it wasn't the problem in three others.

  Waste of time with the HP Chat Support:

  Contacted the HP Support, not one but twice. First time the Executive support uninstalled the keyboard driver and takes about half an hour to understand why the keyboard driver is not be shown in the Device Manager. After that I told him that in order for the material to be detected again, you must restart the system and then he has restarted and told me the problem is fixed and class case.

  Second time, Executive support even after say everything that I lived in the previous session started the remote session and continued and tried to update my graphics driver (I don't know why) from Device Manager. I don't know who did his Executive support because my PC has switchable graphics and HP says strictly do not update the system with switchable graphics cards manually from any where but support center HP or HP Web site.

  Finally I convinced to send someone.

  HP technician visit:

  Front panel of the laptop (keyboard + touchpad) replaced. The engineer had to remove each component of the system to reach the keyboard and replaced it finally. But then after a while when I tried to connect to my wireless router, it wouldn't even detect the connection (Yes, he was working just before the part was replaced, but not now). Not yet detected the router in the adjacent room, while all others of my device (cell phones, HP G4, tablets) can detect and connect to it.

  Which is exactly the problem:

  --> Internal Wifi Module Signal fell and it must only be connected to networks when the router or Wifi access point is close to the laptop.

  --> Hardware Wifi is fine, but the signal is removed. Before the replacement of the façade, off my all other 3 laptops and mobile phones, this system had the stronger WiFi signal.

  -->, I am aware of this problem and is not new, same problem happened to my old HP Envy 6 1002TX after that I got is fixed screen. But, as it was out of warranty, I couldn't get it repaired.

  I tried the things:
  1 reinstall the Hardwares.
  2 computer Reset.

  3 HP Support.

  I am currently connected to the internet by using the external USB WiFi card of Tenda. Here is the screenshot:

  

  Aftermath:

  Contact HP support, it took a lot of time to convince them that the problem is not with the software, otherwise they would have lost my time to reset the computer again. I arranged another visit of technician. We'll see if the problem is resolved.

  I searched online if anyone else had anything like this, I came across a comment:

  "Tighten the two fixing screws of a quarter turn each Wifi card in place. Guess he did not rest properly.

  This is the place where I got this: http://www.eightforums.com/network-sharing/22767-wifi-signal-strength-dropped-2-5-bars-2.html

  I reset the system again and packed until everything is fixed.

  A few comments:

  How you can recruit these people in the technical team that may not know yet what the problem is. He saw this thing through remote assistance that remained adamant that it is a software problem and asked me to give. I already told him that the system has already been reset and I tried to reinstall the drivers, but he wasted both of our time. If I were based not so much, it would have closed the ticket already.

  I don't know why these people think customer is a fool and don't know anything. Also, in the course of the support remote he ran a few commands on cmd which were for when you can not connect to the internet, but in this case the connection has not yet detected. I don't know why they do things like these.

  No doubt HP service is great, but you lose a lot of time to prove that you are right. The last time with my laptop 1303AU G4, there was a problem, but the local service station couldn't even find where the problem was. Then I had to search on the internet about this problem and found that it was because of the faulty motherboard and he said to the HP support and finally when only 10 days of warranty was left they took the laptop and fixed.

  PS - I'm no * beep * this time. I want the laptop fixed like new. I regret already buy one of your fancy 6 1002TX model until today and I'm not going to see the same thing happen to it. repair or give my money!

  The problem is now resolved. Finally, HP sent a good technician who changed the WiFi module and the problem was solved. If HP have sent the same engineer before I would ever encounter this problem. Nevertheless, thank you very much.

• New OTA in Room 7 and 8 users

  A new OTA is available to you 7 3740 and 3840 8 owners.

  The updates include:

  • MyDell integration

  • Integrate the cast of Dell

  • Improve connectivity Dell Cast

  • Enable subassemblies: Optimization of memory

  • The camera driver for the optimization of the memory tuning

  • Enhance the functionality of front camera zoom during video calls Skype/Hangout

  • Update FW to provide information CPU

  Visitors to China

  • The LeTV functionality improvement

  • Improved zoom QQ video call feature

  TB

  In my view, there is a major problem with the venue 3840 (zoom on Skype problem) and have dealt with him for some time.  Totally frustrated by those in India "advancing to their team of concern."  I filed a complaint with the Better Business Bureau in Texas.  Two days later I received a call from the United States and they agreed a refund request.  Dell cannot appreciate me this announcement, but if it can save someone the months of calling their 'technical support' then so be it.  I have 5 Dell computers and never had to go through this before.  Incidentally after that they agreed a refund request that I kept getting emails from the India telling me they make progress on this issue.  I have always trusted blindly Dell in the past and never checked on the low side on Amazon for this product or I would have never purchased.

• Notes crashing with El Capitan 10.11.6. Are updated recent bug fixes.

  Notes crashing with El Capitan 10.11.6. Are updated recent bug fixes. It always sends Apple incident reporting, so I am surprised that they have not yet set. This is a brand new Apple iMac computer, I went for the best to have a trouble-free operation (I hate LAGS). But the computer hangs out sometimes which is disappointing. No one knows what to do to keep my computer running efficiently? In addition, someone at - it a solution to the issue with Notes crashing?

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry in the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Download and install the update of OS X El Capitan 10.11.6 Combo.
  6. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.

• broken check of email Sync feature on create new account

  broken check of email Sync feature on create new account on windows xp pro sp3 all updates were installed very old machine. Firefox is the latest version 30.0. I am trying to create a sync account to migrate my firefox profile (bookmarks, quick links, etc.) to my new windows 8.1 pro machine all installed updates. Firefox on windows 8.1 is 30.0.

  I also tried to check the Synchronization tab in the options. I know not who finally sent me an e-mail but said that the verification link is corrupted, I opened the link in a new tab to copy here: https://accounts.firefox.com/verify_email?uid=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx & code = FBI & service = sync

  any help greatly appreciated to get checked and my ultimate goal to make everything migated to my windows 8.1 pro machine.

  [personal data voluntarily obscured - please do not post this link - c]

  It may take some time before the end of the first synchronization.

  You can see these words: pages through the address bar:

  • Subject: sync-log
  • Subject: sync-progress
  • Subject: sync-tabs

• IF I update from Mozilla to a new version of the RoboForm toolbar will be gone. Like all RoboForm users, I use it all day long. WHEN the problem will be solved?

  IF I update Mozilla Firefox for a newer version, my RoboForm toolbar will disappear; Therefore, I do not update. Like everyone, I like RoboForm and use it. WHEN you fix the compatibility issue then the RoboForm toolbar will return to service?

  There should be no need to actually uninstall beta, simply install the new version of Firefox 24 on top of version beta.

  • visit http://www.mozilla.org/en-US/firefox/all/ and select and download an appropriate version.

  Take care of NOT to serve any of to remove personal preferences that will destroy the Favorites and passwords.

• Windows Vista - August 2010 update

  Windows Vista - August 2010 update. Stuck at 17 of 18 updates. Hard drive is occupied after 17 hours of update.

  Hi JX2,.

  1. you receive an error message?

  2. do you have security software installed on the computer?

  First restart the computer and check more later history of the update to get the update failure and post details back with details.

  (a) open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  Also try to install new updates after restart the computer after the computer is clean boot state in order to avoid any interference from third-party program while installing updates.

  See the Microsoft article below and try again mentioned step

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• can I install the old microsoft security updates (2009) on top of new security updates (2011)

  can I install old microsoft security updates (2009) on top of new security updates (2011) (ex: KB1234 is a fix for ieexplorer 2011)
  "(and then on top of that I'll install KB4321 a fix for iexplorer too)." Is this possible? Or is the patch also corrects the same problem that occurs in the past?

  Run Windows Update... it will select what your computer needs.

• Automatic updates failed to install six new updates.

  I had a problem with the MS updates and worked with a Service professional customer online supports Microsoft MS.  The suggestions he gave helped with updates that don't settle and apparently cleaned as well other issues.  I am very grateful for the help. However, two days later the automatic updates tried to install the new updates and they did not like before with the same error code (error Code: 0 x 80070017).  A description of the six failures arises from the history of MS update:

  Update for Microsoft Office 2003

  (KB2539581)

  Wednesday,

  On 10 August,

  2011

  Microsoft

  Update

  Office 2003 Security Update for Microsoft Office

  2003 (KB2509503)

  Wednesday,

  On 10 August,

  2011

  Security for Microsoft Office was updated

  2003 (KB2289163)

  Wednesday,

  On 10 August,

  2011

  Microsoft

  Update

  Office 2003 Security Update for Microsoft Office

  2003 (KB2288613)

  Wednesday,

  On 10 August,

  2011

  Microsoft

  Update

  Office 2003 Security Update for Microsoft Office

  2003 (KB972580)

  Wednesday,

  On 10 August,

  2011

  Microsoft

  Update

  Office 2003 Security Update for Microsoft Office

  2003 (KB951535)

  Wednesday,

  On 10 August,

  2011

  Microsoft

  Update

  OPTION A: See if running the tool to Detect & repair fixes the problem. See resolution method 2 here-online http://support.microsoft.com/kb/821593

  If still no joy, see if uninstalling & then reinstalling Office 2003 solves the problem.

  OPTION B (recommended):
  

  COMMENT: If a free trial Norton came preinstalled on the computer when you bought it, the free trialware was reinstalled (but invalid) when you have done the clean install of Windows XP last year. If you have NOT done a uninstall this free-trial AND THEN (b) run the Norton Removal Tool (c) BEFORE you installed AVG, but also of the Windows updates, you are looking to do a clean install.

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Wish I had better news for you. Good luck!

• Windows 7 update says it is downloading files, but is always "0% complete" since August 2010 update attempt.

  The system is Dell XPS 9000 with Windows 7 Home Premium 64 - bit, less than a year, never had any problem update before August 10, 2010 update.  System was disconnected while I was away, started normally, when I got back 11/08/2010.  During the shutdown showed a normal notice of 15 records up-to-date with the usual "don't turn the computer" warning.  First three files updated, no problem. the fourth file in the 25% update complete message, he left for four hours, never has finished, remained at 25% full.  Have not been able to get 12 remaining files to download using the start of Windows Update.  Says it is downloading the files, but hangs at 0% complete, sometimes 15 percent complete, sometimes 32% full.  Tried to clean boot, etc., normal is fixation methods... no luck so far.  Been through forums, may have missed something.

  Go to control panel-> system and security-> Windows Update and change to never check for updates (not recommended), and click ok.

  now... to change the settings for Windows Update to install updates automatically (recommended) and click ok.

  Try it now...

  Which seems to solve my problem, even after the FixIt utility has been run, and has not fixed the problem.

• I did the most recent iOS 10 updated, just heard on the news that Yahoo has been hacked.  I changed my Yahoo email but can't find the field to change on my devices.  It is simply not there, what is happening?

  I did the most recent iOS 10 updated, just heard on the news that Yahoo has been hacked.  I changed my password to Yahoo mail but can't find the field to change the password on my devices.  It is simply not there, what is happening?

  For some reason any change automatically if change you it online. Today, I changed my password through my office and I went to change the mail and she had already changed.

  You can try to delete your account your unit off and add it again.

• update my current get the new OS 3 Apple Watch

  update my current get the new OS 3 Apple Watch

  Yes.

• Updated my iPad with the new OS.

  Updated my iPad with the new OS. Initially it lights, so I have two buttons held together and finally happened. Now it is stuck on the screen with the time and will not move forward, nor is it resets. Is there any solution for this?

  Thank you

  Kat

  Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  If a force restart does not help try recovery Mode:

  https://support.Apple.com/en-us/HT201263

• I changed my phone number, but I can't update the 'ACCESSIBLE AT' number on my Apple ID account Please can someone explain how I can change the number of 'ACCESSIBLE AT', to update my account with my new number?   Thank you.

  I changed my phone number, but I can't update the 'ACCESSIBLE AT' number on my Apple ID account Please can someone explain how I can change the number of 'ACCESSIBLE AT', to update my account with my new number?

  Thank you.

  Try going into settings > FaceTime and turn off FaceTime. Then go to Messages and turn off iMessage.

  Turn off your phone and then new.

  RETURN to FaceTime and turn it on again, even with iMessage. He has to try to reactivate and your new number should appear (you can see this more down in the addresses to send & receive). You may need to log into your Apple ID for this operation.