22 - 3125na AIO: AIO compared to AIO 22-3025na 22-3125na

Similar Questions

• What is the most recommended aio Printer Printer wireless?

  I have an old one I have Mac, using 10.8.5, I Pad 2, I have 5 phone. Liked my old aio Kodak but you want a printer affordable wi - fi. The old HP printers ink costs were outrageous! Now, I'm a bit wary of HP.

  List of Apple AirPrint printers - topic AirPrint - Apple Support

• HP Pavilion AIO: Camera stopped working for windows welcome

  The new AIO Pavilion came back with Windows 10 months and I used facial recognition to open a session.  All fine until 1 week ago, when the home screen says now "preparing...". "and"can't turn to the camera. Use the PIn to connect.

  If I go into RealSense, the camera works very well.  Windows settings for the camera are all lit, so nothing seems to have changed.

  What is a recent update of Windows 10 which changed the signal to the camera?  If so, how I restire it?

  Hi there @DavidG6,

  That the Forums are with you!  I understand that your web camera does not work properly for connection purposes.  I'm happy to help you with this.

  Assuming that it could be a recent update of Windows 10 which is the culprit, you can try using a computers HP - use Microsoft System Restore (Windows, 10, 8) to return to the level of before the problem appeared and see if it works now.  If so, then it is likely a change in software to your system.  Once you have determined that, then you can check: How to prevent Windows 10 to automatically download updated -howtogeek.com, prevent this set of updates.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Installed Windows 7 on HP Pavilion 23 AIO - Wireless does not

  Hi, I installed windows 7 to replace the 8 windows pre installed on my hp pavilion 23 aio PC and network drivers came out. I managed to get lan to work by getting drivers Realtek RTL811F downloaded and installed from usb, but the wireless won't come back

  Anyone know how I can make it work?

  In the Panel, there are several troubled devices - network controller, peripheral pci, pci simple communication controller, sm bus controller and bus unciversal controller

  Hello:

  The drivers of motherboard of this model should also work on your.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5265168

  The specific drivers you need are:

  SMBus:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106361-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  USB:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106744-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-116781-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106746-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  Try this driver for the wireless card. (The page on record your model does not show that it comes with the wireless network card).

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106131-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  If this driver does not work, click on the network controller and view the ID of the hardware for it.

  Who can tell me what model wireless card it is, and I can post the link for the driver you need.

  If you don't know where to find the hardware ID, please read the guide at the link below.

  http://www.WikiHow.com/find-hardware-ID

• Pavilion 22-H010EL: need to replace the cable SATA in my AIO, can't find the right

  Hi all, I have a problem with my 22-H010EL AIO HP Pavilion TouchSmart.

  The hard drive broke twice while PC was covered by the warranty; now the warranty period is over, and the hard drive broke again. I guess that there is a power supply problem, in fact I see the hard drive has boots more than I actually received; Sometimes I hear a sound of boot clearly while the PC is on (and I'm sure that's not because of the stand by, because it happens while I use it). Also, just after the first replacement of hard disk, it showed 7 boots upward in an hour; I guess the power/SATA cable is damaged, the origin of the problem described, but it could be the motherboard, too.
  I would like to replace the cable to see if it works, I really hope he does it; Thanks in advance for any response.

  Hello! @korer621, thanks for the reply.

  You can find it in any computer store or you buy it on all Web sites online.

  Make sure you order the same part number.

  Let me know if you have any other questions!

  Have a great day!

  Please click "accept as Solution" If you feel my post solved your problem, it will help others find the solution.

  Click on the 'Bravo, Thumbs Up"at the bottom right to say 'thank you' for helping!

• Wireless using Photosmart 7280 AIO and Photosmart 3210 AIO USB - installation problem

  I use Windows XP sp2. The 7280 is new, so I was told HP support completely uninstall all my computer HP software, then install more software 7280, then use the menu option 'Add device' on the installation software of 7280 again to install the 3210. I have installed suceesfully 7280 software and am able to access the 7280 on my wireless LAN. However, when I use the installation of 'Add device' in the installation software, I get the dialog box 'Connect Your Device Now' (following the instructions for the installation of the USB) and when I connect the USB to my 3210 to the computer, I get the Windows Wizard 'addition of material", which is unable to locate the drivers for the 3210. The button 'Next' in the 'Connect Your Device Now' dialog box is not enabled, so I can't continue. It seems strange to me that Windows identifies the device but the HP software does not see. The 3210 is not in my list of printers in Windows.

  Even more strangely, yesterday I ran the base driver and utility download for the 3210 off the coast of the HP site after installing the 7280 software (probably shouldn't have done) and everything worked, I was able to print on both devices, however this morning when I turned on the computer I got a HP dialog box telling me that the installation failed and it can uninstall some software including all drivers 3210.

  Any suggestions? What I have to spend 2 + hours to uninstall and reinstall from the beginning again?

  Well, I think that I solved, at least as well as is possible. I just uninstalled, installed all the 3210 drivers downloaded from HP, then install the software suite full 7280. Both printers are available and print jobs, but the HP Solution Center software only allows me to access the AIO 7280, so I guess I won't be able to scan from my 3210 on my computer - I have to use the 7280 for this. I didn't install the software suite full of the 3210 - maybe that would give me two centers solutions HP (two different versions), one for the 3210 and one for the 7280...

  Incidentally, I don't have the CD 3210 - I think I have lost - so I'm dependent on the HP download page.

• HP photosmart AIO 7525; noisy and too long to print

  HP photosmart AIO 7525

  connected to a HP windows 7 64 bit

  It is my printer 2nd in 2 months (same model # from the same store).

  First, I went back to scratches and that I could not solve the problems of alignment.

  This, it is extremely noisy; It takes a minimum of 50 seconds to even begin printing, looks a keurig coffeemaker, and it continues to operate after the print job. Looks like it's lining up or clean the printhead everytime

  Initially, it would not connect to web services; but after 2 hours, I got it to work.
  In printing a page of a web page, the only thing that printed was clearly the company to the top, the page number, address date and files below. All him rest isn't clear (like the rest) and the characters are shredded and not aligned.

  Any help on these questions or I am going back this one too?

  Thank you

  No, it does not.

  the update does not apply to my system

  Win 7 64 bit

  I think I can just return it too

• HP OfficeJet 7612 e - AIO: DUPLEX PRINTING OPTIONAL & STANDARD

  Hello

  What does the 5.Lubrication Duplex printing means for HP OfficeJet 7612 e - AIO.

  Hello

  This means that a user can choose to buy it separately (as an option).

  The owner of a HP Officejet 7610 can buy the duplexer (optional) to activate automatic duplex printing.

  The HP Officejet 7612 comes with the duplexer as standard (in box)

  Hope says.

• Anyone who has used the service of third party of AIOS USA?

  I was contacted by a company called AIOS USA claiming to be third party Apple support and they sell me a series of plans Apple Care for my MacBook Pro at a reduced price that Apple sells.  What led them to me was a claim that their Global MicroSoft Server showed that a crowd of error returns. They claim they can provide such care as an authorized Apple reseller and services plans.  The planned number was 800-316-2052.  Anyone had experience with this company?

  They try to rip you off.

  This phone number has been reported as a phishing site that will try to steal your ID.

  I would highly recommend against qualifying.

• D160QD: Black screen on Envy AIO 23

  I have an Envy23 AIO ToichSmart... My PC has quit the boot (black screen)... I tried to change the memory, motherboard and map of scalar... Still, does not start upward...
  I have 8 GB of memory in her...
  
  For the purpose of troubleshooting... I tried different memory... 2 GB... The machine starts... If I put in 4 GB of memory or even memory 8 GB 1600 that the computer came with... It does not start until... Why the memory size is now a problem? I need to replace to get my computer working normally again?
  
  Help, please

  FINALLY SOLVED my problem...

  I had installed Windows 10 and it corrupted my bios...

  I was able to start the computer with a 2 GB to 8 GB chip chip inplace.

  I downloaded the upgrade of the BIOS and installed...

  Then I formatted and reinstalled the OS and I no longer have a black screen...

  System starts every time now.

• Lines on copies b & w with OfficeJet Pro 8600 e - AiO

  When I make a copy in black and white with our 8600 Pro OfficeJet e - AiO output contains several vertical lines. If I press the color instead the output is fine. Cleaning is obviously not in this case.

  No problem with printing or fax either

  Try to take a look at the solutions suggested here http://support.hp.com/us-en/document/c02881567

  Good luck.

• How do I scan multiple pages using HP PhotoSmart AIO 5512

  With Windows 7 64 bit wireless for HP 5512 AIO printer.  Try using the HP software to scan several pages in a single document, but it does not provide options or the possibility to do so.  Is there a switch or a control or something escapes me or do I need a different software?  I could do with my old PhotoSmart Plus (B209A).

  Hello ScooterSim

  I understand what you mean. Try to change the resolution to 300 dpi or lower, some printers are unable to analyze multi-page documents to over 300 and it is then hidden.

• 23 - d254er envy: mSATA SSD on PC AiO

  Hello!

  I kinda want to improve my PC HP ENVY 23 AiO AiO computer Touchsmart (p/n: 23-d254er).

  Is this PC AiO support mSATA Samsung 850 EVO SSD disk Samsung MZ-M5E250BW ?

  I found a free location of MINI_CARD2 on the motherboard (see photo of atteched).

  I don't buy or not this SSD.

  Thank you!

  Hi there @iliyas1985,

  Welcome to the Forums of HP Support!  I understand that you are looking for help for a potential installation of SSD.   I'm happy to help you with this.

  Looking at HP and Compaq Desktop PCs - specifications of the motherboard, IPISB-NK (Lavaca3-SB)for your system, it has the following internal expansion slots:

  Two PCI Express mini card Sockets (generation 2 speed)
  A PCI Express MXM slot that takes care of a PCI Express x 16 graphics card (generation 2 speed)

  So if you find an SSD, which is compatible with those you can try to use it, but it's never a guarantee that both devices will work together.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Scanner Photosmart Premium C309g AIO

  I have the Phostosmart AIO device installed on my home network with a USB connection to a Win XP computer (server).  I can print to the printer from other computers on the network.  I can scan at the server level, but I can't scan other computers on the network.

  The AIO is installed with the full device on Server Setup and the computers on the network.  I did a complete uninstall and reinstall without help.

  Server: Win XP pro with Service Pack 3

  Computer network: Win 7 Ultimate 64-bit.  This computer does not see a scanner, although it prints on the PRINTER.

  Any information on how to get the scanner works on the network will be greatly appreciated.

  Bill

  Hello bspickler,

  So that you can scan using the PC connected to the server, follow these steps.

  1 > have the printer connected to the router.

  2 > run the printing software so that it finds the printer.

  Please click here to access information on how to have the printer connected to the wireless router.

• PAVILION TOUCH AIO 23 ": turn the rear display after having turned it off

  I apologize for this issue, but I can't seem to find what I'm looking for.  My question is this:

  I have an AIO (ALL-IN-ONE) 23 "touch Office.

  I decide to turn off the display.

  After [enter here] I decide I want to turn my screen back on [enter reason here].

  The question is: How can I enable the display on?  I flip the mouse? Do I press the power button?

  I want to just be sure of my options before I commit to simply turn off my screen.  Thank you. And once again, if this question was already posted I can't find anywhere.

  Malygris1 wrote:
  

  Hi there @HannTheftAudio,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with your computer startup. I'm happy to help you.

  As you have already ordered a new power supply and the Board of Directors, you can wait for those to come. But if you prefer try this document: desktop HP - computer starts not (Windows 10.8)

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  I apologize for the inconvinience, but has nothing to do with the general question.  The question should simply turn off my screen and how do I turn it back on.  There is an option to turn off my screen, which leaves the computer running (which is the general point of view).  All I wanted to know is how I would re - turn on the screen.

  I was able to answer my own question however: all I had to do was

  1. just move/click the mouse

  or

  2. press a button on my keyboard

  or

  3. just my touchscreen (as I have a touch screen).