Wireless using Photosmart 7280 AIO and Photosmart 3210 AIO USB - installation problem

Similar Questions

• HP Photosmart B110: Solutions Center installs - problems of usb - only wanted to scan - how to install the scanner part

  -With the help of HP Photosmart B110

  -Use of Tower/Desktop computer running Windows 7 64 bit

  Printer/Scanner connected via WiFi to router

  -Printer part works, I can print to this device

  -Scanner is accessible via the device Web page.

  I want the software of the scanner Solutions Center.

  I can't install the Solutions Center on Windows 7 64 bit. Setup stops and says that I have USB hardware and driver problems. USB on my Tower is USB2 and USB3 ports. Everything works perfectly and the Windows Device Manager has no problem with USB drivers/devices.

  How can I install the scanner software (or all of the Solutions Center software)?

  Tried to look in the folder for the files of instsaller scanner, nothing seems to work. (pulled other positions where it not install Solutions Center). Computer is working very well, so my only option at the moment is to look through the device's Web page, but it is not the best. And I would like to use the software. Also one third of the software "fax and scan" software and windows does not see the connected B110 (probably because it is on a network and not directly plugged into a usb port), so these two options came out.

  HP forum, help please. Is there a way to bypass the usb part? I use this device on a network. Windows 7 sees (even if only as a printer), so also want windows to consider it as a scanner as well.

  Thank you

  Hi @jedi11csa,

  Thank you very much to get back again.

  I just talked with a few colleagues in this regard, and this problem seems to be more a matter of Windows operating system, if the computer displays that USB related errors as well as the installation had not yet reached the point where it asks you to select your connection type.

  Maybe it's an investigation that is best suited for community Microsoft Forums as my resources have been exhausted in this respect.

  I hope that you are able to find the solution you need.

  Thank you.

• I use AOL for email and Firefox 9.0.1. Problem started 2 days ago. Before that I put in the two first letters of an email address and he gave me a list of possible. Now I get "undefined" for each possible instead of the email address.

  There is no problem after updating to Firefox 9.0.1. My contact list always displays as he did before that this problem occurred. When I type the first letter or two of the email address, it used to give me a list of possible. Now t shows just as "undefined" e-mail address when he gives me suggestions for the address that I type in the invoice line. This means that instead of being able to click on my choice in the possible he gives me, I have to go to my contact list, find the name and then click on it if I send email to a person. If it passes in more ways than one, I either enter the full address or use copy and paste from the list of contacts. It is a huge hassle. Any help is appreciated.

  You use like CCleaner cleaning software?

  It is possible that there is a problem with the file that stores the data for the "saved form.
  
  Rename or delete the formhistory.sqlite (more formhistory.sqlite - log and formhistory.sqlite.corrupt, if they exist) in the profile folder of Firefox in the case where there is a problem with the file that stores the data for the "saved form.
  
  Which will remove all the data forms, so you can rename formhistory.sqlite to formhistory.sqlite.sav or move the file to another folder in case you need to retrieve recorded data.
  
  If that worked, then you can delete the files renamed.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• HI.i currently use photoshop lightroom 4 and downloaded books blurb with no problems but now whenever I try to open a session for the text of presentation thanks to lightroom to download the book a msge appears saying "could not cotact Blurb web service.p

  Hi I currently use lightroom 4 and have never had a problem downloading books photo to blurb.but now when I try a message pops up saying ' could not contact web blurb service.please check internet connection "my internet connection is fine.please can someone help me because I need to get the album made it's a wedding album and customers expect on it.many thanks Sean.

  Hello

  I got this problem sorted and it actually very easy. For some reason, the settings on the page of windows that I use on my laptop in contradiction with the text of presentation/lightroom download. All you have to do is to set up a new page of the windows user and configure it as an administrator. You will need to transfer all the photos of the lightroom on your current user page to the new, which can be annoying, but at least you will have hopefully in service yet. I hope this helps.

  Sean.

• Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem

  I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.

  I want to connect the printer via USB only.

  I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.

  But every time the same problem occurs.

  The printer driver is correctly installed, but the printer HP (LEDM) driver failed.

  The debugging information:

  Installed the device.

  hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219

  If I want to reinstall the driver again, I received the message:

  Setup error

  An entry in the Inf file is missing, the file may be Windows 95...

  Could you please help me, how to solve this problem?

  I need to activate the visual experience of Windows Server 2013, then the USB works

• PowerEdge 2600 and Windows Server 2008 R2 installation problem

  Hello.

  I have a Dell PowerEdge 2600 server. Here is the configuration:

  BIOS version: A14

  2 x Intel Xeon 2800 MHz 533 MHz, 512 k (SL6VN)

  4 x 1 GB of RAM

  2 x 146 GB (IBM-IC35L146UCDY10-0) in RAID1

  6 x 147 Gb (Fujitsu MAP3147NC) in a RAID5 configuration

  Firmware for the PERC 4/Di 2.52D

  It has worked well during the installation of Windows Server 2000. But now I need to install Windows Server 2008 R2.

  Here's the problem: when I boot server to Windows Server 2008 R2 installation DVD, it starts to load the files and after a few minutes shows an error (I copy the exact error number) who said he's trying to run the 64-bit application, but unfortunately, this processor does not support 64-bit applications.

  I was able to find a download for Windows 2008 x 64 on the page Support of Dell PowerEdge 2600. This means that you can install an operating system 64-bit on this PE 2600, is it not?

  I know that Windows Server 2008 x 64 and Windows Server 2008 R2 are different operating systems, but 64-bit is always 64 - bit.

  Also, I know that Intel Xeon 2800 MHz 533 MHz 512 kb (SL6VN) is a 32-bit processor, but if it was delivered with these processors, and there are downloads for 64-bit operating systems exist, it should be able to install these operating systems.

  Please tell us how can I install Windows Server 2008 R2 on the PowerEdge 2600.

  Thanks in advance.

  The list 2008 x 64 in the list of OS for the 2600 is clearly a typographical error / support/web content team:

  • The 2600's chipset does not support ALL 64-bit processors
    http://Ark.Intel.com/products/27741/Intel-E7501-memory-controller
  • No. 6 systems are supported on 64-bit OS - not all listed here, but the 6600 lists NO 64-bit OS (8 G was the first):
    http://advisors.Dell.com/AgileWeb/iDrivematrixView.aspx
  • 2003 x 64 is not no more, which would be if 64 bits have been supported all the

  You pay for 2008 x 86 as the latest OS on 2600... or get a newer server (starting with the 8th generation of servers as the PE 2800) to operate 2008R2.

  "2008R2 is a 64-bit operating system that is not as forgiving as 2008 x 64 on the execution of threads of 16 bits."

  16-bit applications are not supported in 64-bit operating systems:
  http://blogs.technet.com/b/chitpro-en/archive/2009/04/14/Windows-and-16-bit-applications.aspx

• And anyone who has used the creative cloud cleaner to help with installation problems?, and anyone who has used the creative cloud cleaner to help with installation problems?

  And anyone who has used the creative cloud cleaner to help with installation problems?  I should try?

  Hi Alison,.

  You do not specify the issue that you are facing, but you can restore Photoshop CC 2014.Please use the link below to find out how to install an older version of any Application Adobe CC.

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

  Link to adobe vacuum as you said use the Adobe Creative Cloud cleaning tool to solve installation problems

  Cloud troubleshooting creative risks troubleshoot Adobe Creative Cloud download and installation issues

  Let us know if that helps you solve/Rolling back Photoshop.

  ~ Assani

• Tecra S1 and drive external hard usb 2.0 are supported in the BACK

  I use Norton Ghost 2003 and Maxtor 200 GB USB 2.0 external drive to store my image.

  I need boot BACK to start from floppy or cd and recognize my external drive before restoring my image with ghost.

  My Tecra S1 use bios 2.40 and my external drive is not recognized under dos.

  Other mobile third-party, everything works fine.

  In this forum, someone else has the same problem.

  Anyone can help us?

  Thanks in advance

  Gaetan

  Hello

  Maybe this helps you, the Tecra S1 has an Intel 855 PM chipset.

  If you google around you can find a BACK based USB driver and storage of mass for your chipset.

  Bye Bob

• 2481 - 3SG L530 - first 1.4 GB of RAM of 4 GB 'reserved by material' and now 2.2 GB? Problem BIOS/UEFI?

  Hello

  Using a Thinkpad L530, which becomes a few weeks over a year (-> warranty expired). Running Windows 7 64-bit on it (in BIOS compatibility mode).

  There is, at the same time (cannot say for sure) four months when I installed an update of the BIOS (which jumped several versions), then all of a sudden my resource monitor showed 1.4 GB of memory reserved by the hardware.

  I did some looking and also called the hotline of Lenovo Germany support (because they don't send support) because my unit was still in warranty, at this time, but useful guys might not help me get back memory - the conclusion was that for some reason, that the update of the BIOS must have changed how the integrated graphics card memory is managed intel (size is dynamic). Due to the fact that a downgrade to BIOS was impossible (due to some changes), they also offered to replace the motherboard with an older BIOS revision, but I refused (I have that it will not much help because I need to upgrade the BIOS later anyway, and really, I didn't miss my primary work machine).

  However, yesterday, after having done nothing more to try the different operating system a few live CD and certainly not after installing a new BIOS update or similar, sudden reserved hardware memory was 2.2 GB (I can say 100% certainty that Monday, it was not, since I was unable to resume a VirtualBox VM suspended Monday due to the change of configuration of memory - and to make sure I also was installing drivers) (or updates to the BIOS since Monday).

  So I'm now sure that this problem (and probably also the other I had before) was not caused by an upgrade of the BIOS or changes how Intel's integrated graphics is managed, but more likely a BIOS/Firmware bug.

  Also, the missing memory shows not only in Windows 7, but when I start a live Linux CD or at memtest86 boot.

  So I studied a bit and found out, that if I boot a Linux live CD (which support it) in UEFI mode (with CSM disabled legacy support), suddenly I can reuse many of my 4 GB of RAM. But only here, and I would use it on Windows and not by the re-installation of a license of Windows 8 in UEFI mode...

  Some information that I have collected (such as memory card EFI and card memory at the start of Windows and Linux, and Linux UEFI, screenshots of Windows) is available in this post in another forum: http://superuser.com/questions/746497/what-hardware-device-used-to-eat-up-1-4gb-of-my-4gb-ram-and-no...

  Does anyone have any suggestions

  -How do I know where this memory is gone?

  -Why memory cards so different between boot UEFI and BIOS/CSM

  -How to get the memory (without replacement)

  I heard of many problems UEFI (not only for Lenovo but also other suppliers) is caused by certain invalid EFI variables, is there a way to reset all variables of the EFI on my laptop (I am aware that I may have to reconfigure the boot settings later)? I tried flashing the BIOS (a version at the bottom and back again) and installation by default, or reset settings Secure Boot loading, but that did not help for my problem.

  
  

• Pomp A60-106: how to print wireless using HP Photosmart C4380

  Good afternoon

  I confess that I am no expert PC but have spent 4 hours this afternoon trying to follow all the help and support options to turn on my laptop to print wireless using my new HP Photosmart C4380.

  Wireless network adapter appears under control panel, but I can't get the light to come on the front by FN and F8, of the any or others 101 things I tried thorugh etc. Device Manager - I'm sure that there is an easy way, but I can't find it and lose the heart! Can someone offer me some ideas?

  If so please have them step by step so I can make sure I don't miss anything.

  Thank you in anticipation of your ideas...

  Rachel

  Hello

  I'm sorry if this seems a silly question but first:

  Are you REALLY sure have a wireless card installed?

  And the second question:

  Do you have already turned the switch on "ON"?

  Because otherwise, the light will NEVER go up.

  Please give feedback if you tried to change the pit wireless switch 'ON '.

  Greetings

• Impossible to get ipad, iphones to print using wireless on Photosmart estation e510

  I have a photosmart estation e-510 and I'm trying to get my assortment ipads, iphones to print wireless using this printer.

  I downloaded the iprint applications, and I have the function working on the printer wireless. Apple products will not recognize the printer. I use a router dual-band.

  I looked on the forums, on the HP website to no help.

  Any help would be appreciated

  Bob

  Let's start with a reboot of the router.  Pull his plug for a few seconds, reconnect and wait for it to start.

  So who disobeys, restart your printer and your iOS devices.   Make sure that all devices have the latest firmware.

• HP 02 ink cartridges using HP Photosmart 3210 series

  I have a set of HP 02 series ink cartridge that I bought to use for Photosmart 3210. When I insert one of 02 ink cartridges in the printer, it returns an error message indicating that the printer is configured for the 363 series cartridges.

  Can someone help me what to do for 02 cartridges work on my printer?

  I'm on Mac OS X 10.6.8

  Thanks in advance

  Flemming

  For your printer cartridges are regionalised.  Depending on what country the printer was purchased in the accepted cartridges will be different.  Search for cartridges suitable for your model on the site of HP SureSupply here.

  Unless you bought the printer in a country and moved to another country there is no way to change the region of the printer.    Webpage of HP on the subject is here.

• HP Vivera Photosmart 3210: EXPIRY of the INK. can buy black ink only and print n & B with the range of printers hp Vivera 3210?

  all ink has expired. can I buy only black ink and print n & b with hp Vivera printer, photosmart 3210 all-in-one

  and black and white printing only with color expired ink in there?

  Hi @peanut7949,

  I believe, with this model, you can continue printing with inks has expired. That being said, if you replace only the black ink and continue to print with others (expired), it should be fine.

  Here's what I could find on the subject:

  Each ink cartridge has an expiration date to protect the printing system and ensure a good quality ink. The cartridge expiration date appears on line 53 of the free test report.

• Photosmart 3210: BLUETOOTH ADAPTER for PHOTOSMART 3210

  I have an old Photosmart 3210 all-in-one printer still works fine.  I want to make it wireless using a bluetooth adapter.  The recommended is bt300.  Y at - it a newer version that would work? I don't think it sells more.

  Hi @SW-NewtownPA,.

  Welcome to the Forums of HP Support!

  I see that you are wondering if you can use a bluetooth adapter that is different than that of your printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I don't know if you can use another bluetooth adapter, but the manual indicates that the HP bt300 and HP bt400 work.

  Manual

  Login your HP all-in-one are equipped with a USB port you can connect directly to a computer via a USB cable. You can also connect your HP all-in-one to a wired network. If you insert a bt300 HP or HP bt400 series adapter printer wireless Bluetooth® in the front USB port, Bluetooth® devices such as PDAS and camera phones can print to your HP all-in-one. Note in the rest of this chapter, the bt300 HP or HP bt400 series Bluetooth® wireless printer adapter is simply referred to as an HP Bluetooth® adapter.

  To see if these adapters are still available, or if you can use other adapters, I would call the HP parts store.

  To order HP computer and components of the printer parts by phone please call 1-800-227-8164 Monday-Friday 07:00 - 7:00 pm CST

  Hope that answers your question. Thank you for posting!

• . HP Smart printing fails to include images - all-in-one printer, HP Photosmart 3210

  With the help of HP Smart printing on all-in-one printer, HP Photosmart 3210. Smart photo has disappeared from my computer and now reappeared. Now the images are not yet an option to include on the printed page. They do not appear.  Has anyone else had a problem with Photo Smart?

  What operating system do you use?

  What did you do to make them reappear, or just is it?

  Have you noticed updates to HP or Windows until the printer is missing? What happened before he reappeared?