Lines on copies b & w with OfficeJet Pro 8600 e - AiO

Similar Questions

• Maverick incompatible with Officejet Pro 8600 Plus

  Maverick update os x 10.9 is incompatible with Officejet Pro 8600 Plus.

  1 PDF files from the Web pages are black and show no information when I try to print from any browser.  Must take snapshots of Web page and print from that

  2 info printer shows that it is still printing when it is finished and will not move forward to the next task

  Help, please!  I see that there is no HP software update to resolve this issue and am confused why you didn't do your printing software compatible with a huge update of Mac.

  

  Hi podisc,

  Thanks for the quick response.  It is good to hear that you can print, it's at least a start.

  I know that you have not received the error messages in the document, but the behavior you describe leads me to believe that the software did not completely uninstall or install completely with the driver for the Mavericks.

  Please follow the steps listed in the document below and let me know how it goes.

  An "unsupported Operating System" or "Software is not compatible" message on a Mac running OS X v10.9 Mavericks "

  http://support.HP.com/us-en/document/c03976994

• 6 "x 9" envelopes with officejet pro 8600 premium

  I try to print 6 "x 9" envelopes of greeting cards on my new officejet pro 8600 premium and get error message paper size mismatch. " With my old photosmart printer I was able to create a custom size envelop for this problem. But this option is not available on my new and better printer. Any ideas?

  Hi garyaw2,

  Try adding your old printer driver for JO 8600 and try to print, please follow the steps below to add a printer.

  Start > devices and printer > add a printer (available on top) > select Add a local printer (NO other options) > select Create New Port > port TCP\IP Standard select > next > enter IP address of JO 8600 (can be found by selecting the option Wireless on the front panel of the printer) > following > Select manufacturer such as HP or Hewlett-Packard and under printer select your old c309 printer and complete the wizard.

  Try to print again with prinetr selected c309.

• HP OfficeJet Pro 8600: How to print on paper of custom format with Officejet Pro 8600 for Windows 10

  Problem: Cannot create a custom for HP Officejet Pro 8600 paper size

  Found a solution for Windows 7, but I need this same problem solved for Windows 10...

  The solution: 'Using pilot Deskjet 9800 to set a custom paper size to print for Officejet 8600' worked very well for me on a Windows 7 machine...

  However, the HP Deskjet 9800 driver is not available for Windows 10... you have another driver I can use that would work with Windows 10 and which is compatible with the HP Officejet Pro 8600... ???

  Hello

  Use the HP Deskjet 6940 as another driver, if it is not listed under HP it appears after clicking the Windows Update button in the Add Printer dialog box:

  1. Right-click your printer 8600 and select printer Ptoperties. A note which port is selected under Ports.
  2. Click Add a printer.
  3. Click on 'the printer that I want isn't listed.
  4. Select A Local port or a netowrk with manual settings.
  5. Select the port used by your printer.
  6. Select HP
  7. Select HP Deskjet 6940
     Note: Click on Windwos update if it is not listed under HP.
  8. Fill the wizrd and 6940 driver allows you to print a document custom formats.

  Kind regards

  Shlomi

• Cannot select tray 2 copy with Officejet Pro 8600 Premium

  Win 7, 64 bit

  OfficeJet Pro 8600 Premium

  I installed the drivers on the disk supplied in the box. (Not sure if there is a new driver or an update yet for this product.)

  I bought this printer so that I could load my UPS package labels into a bar of tasks and plain paper in the other.

  I loaded the labels into Tray 1 (according to instructions) and paper in tray 2.

  I have everything works fine except that I can't understand how to specify tray 2 as the tray to make copies of. In respect of the COPY > SETTINGS > SET SELECT only Tray 1 is displayed.

  Issues related to the:

  (1) why not tray 2 option to copy? How can I fix it? A firmware update maybe?

  (2) printing these UPS labels from tray 2 seems to work very well. Is there a reason why this would be bad?

  Thank you!

  Connected by ethernet cable, he downloaded the new version of the firmware (... 1136BR).

  That fixed it! Tray 2 is now an option under settings to copy.

  The only disappointing is that I asked about a new version of the firmware in my first question... but it took a whole week to get this resolved... and I had little to get to the answer myself!

  In any case, now it is fixed and seems to work very well.

• Beautiful copies. Print programs Officejet Pro 8600 N911a

  Just ran 20 copies without any problem. When I try to print from Access, Word, Excel, etc. printer behaves as if it's going to print, but then displays the message 'Out of Paper '. Windows 7 64-bit. HP Officejet Pro 8600 N911a. Is about to resume

  Hello raynos,.

  See if this troubleshooting article helps you resolve the problem you are experiencing.

  ' A ' Out of paper ' or 'Choose the motor at a standstill' Message is displayed and the product do not pick up or feeding the paper

• Not completely scan legal size with Officejet Pro 8600 more Documents

  I'm trying to scan legal documents of sizes on my Officejet Pro 8600 Plus new. I have gone through the forums, and this has been a recurring problem in the past (see link- http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Scanning-Legal-Size-Documents/m-p/35416#M14...   ), but doesn't seem to be resolved. If I use the document feeder or glass, the paper is cut down and seems to be stopping at the "A4", legal vs. size. I can't find any setting on the scanner itself, or in the HP Utility software to change this, or even to be able to identify the current configuration, if it is a.

  I use a Mac Pro, system 10.6.8 just installed and started using the printer a couple of days, and everything is up-to-date software-wise. Everything else on the machine works beautifully.

  Can anyone identify what is happening here and how to fix?

  Thanks for your help - I chose precisely this particular unit on the next model down because of the glass/size bed legal, and if I can't use it to scan legal documents, well, it's a problem. Thanks for your help!

  Hello

  Please, try the following steps:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan the image.

  Please let me know of any changes,
  Shlomi

• How to connect a USB modem fax when the phone line is connected to a HP OfficeJet Pro 8600 Plus 4 - all - in-one?

  So I have a HP Office Jet Pro 8600 Plus (4-all-in-one) that I normally use to fax documents for commercial purposes. I became more and more tired for the first printing of documents directly from my computer to be faxed to another office. It is a waste of paper, ink and time. For this reason, I would like to set up a fax modem so I can use Windows Fax & Scan on my Gateway with Windows 7 computer so that I can directly fax documents from my computer to the recipient fax. The only question is, I have a phone line that I use for my fax and which is directly connected to the fax machine, but I understand a Faxmodem USB also plug into a phone line as well. How can I configure the USB fax modem without compromising the current telephone line attached to my fax machine? Do I need a splitter? I can still use my fax machine to receive faxes and fax all paper document not found in my computer (for ex. documents I received by mail).

  It is always profitable read the documentation provided with the device.  If you had, you would know that the software provided with it will allow you to fax documents directly from your computer without printing it and scanning first.  Download the software (and the user's guide - page 63- here.

• Apple and Dell laptops with OfficeJet Pro 8600 bonus?

  Can someone tell me if I can PRINT (and use ALL other 8600 functions) of a laptop Apple MacBook Pro (with Mac OS X - 10.6.8) AND a laptop Dell XPS (Windows 7) running at the SAME TIME?  I'm running wireless via an Apple AIRPORT EXTREME (802.11n).

  Another words, if I load ALL the SOFTWARE supplied with this printer 8600, on every laptop (Apple Mac) and windows on the Dell, I'll be able to ACCESS & PRINT (and use ALL other 8600 functions) of each wireless laptop?

  Or do I have to DESIGNATE the 8600 PRINTER to use alone or in other wireless?

  I hope that I can do BOTH, because I just bought this PRINTER and never thought that this could be a problem!

  JERRY

  Well Yes, that's what a printer (wireless) network is all about!  A suggestion is however NOT use the CD that came with the printer for this software is often obsolete.

  Download and install the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

• problem with Officejet pro 8600 N911g ePrint

  I'm trying to install eprint on my officejet however I have questions. I went into my settings to printers via the IP address and when I click on activate ePrint, it says this:

  Unable to connect to the server.
  
  Check the Internet connection and try again. Or contact your system administrator or the person who set up the printer.
  If your network requires a proxy server address to connect to the Internet, click Proxy enter or check your browser settings.

  As far as I know of I do not use a proxy server address. I have Cox Cable internet and have set the IP to my computer/printer to static. All other work well i.e. wifi printing, iphone/ipad and ext.

  Thank you

  Danny

  The steps below a usually resolve the problem you are experiencing:
  
  1. unplug the power cord at the back of the printer.
  
  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).
  
  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.
  
  4. wait for 30 seconds, then plug the printer back and power.
  
  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.
  
  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):
  
  1. tap the wireless at the top of the screen of the printer and note the IP address.
  
  2. Enter the IP address in the address bar of a web browser on a computer and press on enter or click the go button browser.
  
  3. the printer status page must be open.  Click network in the upper part.
  
  4. click on networking on the left.
  
  5. Select the Proxy settings.
  Note: If you are prompted for a redirect, click OK.  If you receive a certificate warning, select the option that allows you to continue anyway.
  If you receive an internal system error, refresh the page until it loads the proxy settings.
  
  6. check that all fields are empty.  If they are not, make them disappear and make sure that the Proxy Server requires authentication is unchecked and click on apply.  You should get a success message.
  
  7. click on the network address (IP) on the left.
  Note: If you only configuring IP address and DNS address with a yellow note Configuration, refresh the page until it loads completely.
  
  8. leave automatic IP IP address Configuration.
  
  9 change the DNS address to the manual DNS Server Configuration.
  
  10. enter manual for the manual preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.
  
  11. click Apply and you should get a success message.
  
  12. turn off the printer for 30 seconds and then turn it on again to force the new settings take effect.

  Let me know if you need additional assistance. Thank you

• How to print on paper format customized with Officejet Pro 8600 N911a

  I am trying to print my own designs on custom-size paper (size not included on the list) and does not know how to set up the printer to print on a 10 "x 6,625" piece of paper.  Can anyone help with this?

  I downloaded the last regular printer driver so am at a loss. Any help would be appreciated I try to avoid paying for a printer do the work.

  Virginia

  Hello-

  OK, the machine lets start with Win 7 side.

  Click on start, devices and printers, then add a printer.

  Select Add a local printer. Then choose "create a new port" and deposit up to port box 'TCP/IP Standard' shot after.

  Uncheck "Ask printer" for me and put your IP 192.168.0.10 in the box that says ' Hostname or IP address.

  Click Next.

  When the printer MFG box opens, choose HP on the left (not Hewlett Packard) and HP Deskjet 9800 printer (HP) take right.

  Click Next, as value by default (if you want) and finish.

  Let me know when you reach this point.

• ePrint with officejet pro 8600 more

  When I try to connect to set up my e-print it says my email is already associated with snap fish and it wont let me sign

  Perhaps it is that you have a SnapFish.com account. A large number of long-term HP customers have SnapFish.com accounts and don't realize it. One of the printer software frees customers signed up automatically, and most people did not know, or forgot, because they never used it. Try to go to SnapFish.com and using the forgotten password screen link it connection. Once you have reset the password, go to ePrintCenter.com and use the SnapFish.com log in information for you connect. If this does not help, you may need to contact SnapFish.com directly to delete the account, or use a different email to record with. Another difficulty that I have met is actually recreate a SnapFish.com account, if SnapFish says no accounts exist, or no email comes, when you try to reset your password.

• Problem with Officejet Pro 8600 Premium, Windows 7 professional scanning

  When you are scanning an 8.5 x 11 page and save as a PDF on my computer, the entire page is not displayed.  Is there a setting that I jumped when setting up?  This is my first time on this printer...

  Thanks for the reply.  I've actually turned on Windows Firewall, turn off the first, then and now it seems good scan to PDF.  I really need to be able to scan in PDF, not only in JPEG format.  Scanner seems to work fine now, maybe it was just a quirk yesterday...

• HP Officejet Pro 8600 more AIO automatic document feeder paper jam.

  During the analysis of a smaller document using the ADF, he got stuck in the charger. While recovering the document, a corner of the document got torn and is stuck in the document feeder. Now, whenever I use the loader to scan a document once again, that the document gets stuck because of a small piece of paper that is still stuck in the charger. I tried carefully with a toothpick to catch the small piece of paper, but I can't put a finger on her. Is it possible to open a little more? Not only the cover of the power supply unit? Or are there other ideas to solve my problem?

  Thx for any suggestions you may have.

  Hello KrisV

  You have exceeded the article the ADF (ADF) documents does not Pick Up paper? If so, or if the problem persists, try to slightly heavier paper through the ADF. I've seen some clients clear paper jams using this method. Thicker paper can be thick enough to get out any remaining paper. I'm not sure what specific weight of paper they used however.

• OfficeJet Pro 8600 Scan crash

  I have problems with scanning with Officejet Pro 8600. The scanner works most of the time without any problem, but the same analysis (same settings, same computer to analyze, I haven't changed anything else the photo I'm scanning) sometimes breaks down. It can be planted two ways

  (1) ' preparing to digitize"never ends

  and

  (2) ' analysis now' never ends

  Preparing to scan is the kind of problem most friendly, that after several minutes, says "unable to connect to the computer" (absolutely nothing anywhere, the last scan seconds earlier ended the most perfectly), simply disable the Officejet Pro 8600 for awhile. The "scan now" is a bigger problem, since not even on the power button / reacts to anything and I tried to wait at least half an hour for the analysis at the end. I don't hear it mechanically would do anything (you know, when the scanner scans, there should be some 'noise'). The only thing I can do these days is to unplug the power cord, and one could imagine that shouldn't be so.

  So my questions are:

  (1) what should I try?

  (2) is a good problem and so, then are we talking about problems with hardware or software?

  The Officejet Pro 8600 is no longer new, I bought it in July 2013, but I remember he made at least since August. As he said, the fact that occasionally, but I'd say it's at least 5% of the time I try to scan.

  Ed. More information:

  Operating system: Windows 7 Pro SP1

  Connected wireless

  ScanDoctor try to analyse, and it gives an error "scanner is currently in use. Please wait until your previous task is completed and the scaning try again. »

  There is another scan option I use very often, which is to use a memory card, use the scan to memory card option. the printer has not yet need to be connected.