23 - c115xt envy: can I upgrade my card wireless a faster card with dual band and Bluetooth capabilities?

Similar Questions

• can I upgrade graphics card on pavilion dm 4?

  can I upgrade graphics card on pavilion dm 4?

  Laptops are unlike desktop computers.

  Desktop PC have an open architecture that make the relatively simple upgrade.

  PC laptop and portable access to the e/s available and put at level of the slots through the doors of the inspection and often almost total disassembly.

  Laptops are also limited by the BIOS and the physical attributes systemboard on the video modules and wireless can be used for upgrades.

  A BIOS of the laptop has a white list of the modules that are acceptable. If a module wireless or video is not on the whitelist, then it cannot be used. If a notebook THAT BIOS found during the POST (power on self test) as a module not on the white list has been installed it will warn you and it won't start the laptop computer in the operating system installed.

  If money is no object you can update the video through an exotic external graphics solution like Vidock Gfx.

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DDR4 Ram how can I upgrade worms in my Acer Aspire E5-553-14 year and how many ram slots is there?

  DDR4 Ram how can I upgrade worms in my Acer Aspire E5-553-14 year and how many ram slots is there?

  Thanks for all the help Brummyfan.

• can I use a microsoft wireless mouse 4000 bleutooth with a microsoft no nano Transceiver

  The nano microsoft tranciever overheated and stopped working. So I wonder if an another brand nano Transceiver can again function microsoft 4000 wireless mouse?

  Hello

  Transceiver nano Bluetooth USB (Universal Serial Bus) is a Plug-and-Play device, and it should work with Microsoft Bluetooth Mouse.

  I suggest to login and check if it works with Windows7 and let us know if you have any questions, so that we can better help you.

  If the Microsoft Mouse is under warranty then you can ask for the replacement of the mouse as it was affected by overheating.

  See the link below for more information.

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• HP DV6 7300-EX ENVY: can I upgrade my NIVDIA GE FORCE GT 635 M card?

  and also I can pass the processor or any other component in my notebook?

  Not the graphics card itself on your motherboard even. The processor is theoretically removable and upgradeable, but when most people get a good overview of costs and difficulties, very little actually getting. The best upgrade is to replace the mechanical drive with an SSD. Night and day with respect to the overall functioning of the computer speed. The next best is the max memory if it is not already. Or at least 8 GB.

  Your card it seems you have an i7-3630QM @ 2.4 ghz and could go to 3840QM-i7 2.8 GHz. You have 16 gigabytes of RAM already if no room here, but you do not have a mechanical hard drive slow 5400 RPM which is your bottleneck.

  There is another motherboard with GeForce 650 M 2 GB graphics card but it would be a small performance improvement on your graphics card for a very important cost.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion 15-P117NA: can I upgrade my card wireless 5 GHz?

  I was looking to replace our old router bthomebub router TP Link Archer VR900 3, which is a failure from time to time. I noticed 5 GHz speeds, that was quick and I made him watch in get the router. The only problem is that my laptop does not seem to support 5 GHz and I was wondering where I could get a 5 GHz compatible or a Wifi adapter card compatible ac. What would you recommend for my laptop? The driver I have installed is Realtek RTL8723BE 802.11 bgn Wi - Fi adapter which is located under Network adapators in the Device Manager. The driver version is 2023.15.701.2015, which says that the driver hp support Assistant is the latest version.

  Here is the Service Manual:

  Manual

  See p. 86. Access to the wi - fi card you must remove the top cover, a process involving probably 30 + screws and other fasteners.

  You have an Intel processor, so you can get an Intel wireless card. A better out there is the model of 7260ac of Intel:

  http://www.Amazon.com/Intel-wireless-AC-network-Bluetooth-7260-HMWWB-R/DP/B00N7474CS/ref=sr_1_4?ie=UTF8 & qid = 1452349287 & SR = 8-4 & Keywords = 7260ac

  There is not a 'white list' on your laptop so that you can install any adapter Wi - fi using the exact number of antennas and with the right form factor. The 7260ac linked above might work. Open the top cover will jeopardize the warranty, if any.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• G6R35UAR #ABA: can I upgrade the card wireless 802.11ac

  Please let know us if it is possible to upgrade the card wireless in my laptop to a 802.11ac card.  A currently installed 802.11b/g/n card.

  My PC is a HP Pavilion 17 laptop.

  G6R35UAR #ABA product name

  Thank you.

  There is no white list. Here is the Service Manual:

  See p. 96

  Manual

  You have the 17 inch model and for the 15-inch model AMD HP actually an AC card. This one:

  2x2HMC AC + BT4 Broadcom BCM 4352 WLAN 802.11 for HP Pavilion 15 AMD computer models available for Windows 7 and Windows 8.1 724935-005

  It is an equivalent spare card sold on amazon.com:

  http://www.Amazon.com/Azurewave-Broadcom-BCM94352HMB-802-11-867Mbps/DP/B00IFYEYXC/ref=sr_1_4?ie=UTF8&QID=1453758370&SR=8-4&keywords=Broadcom+802.11AC

  The card would work for you, but I have to warn you that the installation is no easy thing. It requires extensive disassembly and will jeopardize the warranty. You should not try to install an Intel card as they are called does not play nice with AMD computers. The Broadcom will be your best bet.

  If you have questions let us know.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP envy 17: hp envy 17, need a card wifi dual band 2.4 and 5 G

  I want HP 17 inch. I know that I have the ralink wifi card that supports only single band 2. 4 g. I want to replace the card so I can receive dual-band 2.4 and 5 G please indicate on which card will work with my device? I'm happy to give more details on my machine, if you could tell me how to get them. Thank you.

  Product number: C2Y69AV

  Description: HP ENVY DV7T-7300 CTO QUAD EDITION NOTEBOOK PC

  RALink RT5390R 802.11bgn adapter Wi - Fi 1 x 1

  Windows 8.1

  Will this work? Regardless is there a better option?

  http://www.Amazon.com/Intel-7260-HMWG-wireless-AC-7260-Bluetooth/DP/B00DMCVKMU/ref=pd_cp_147_1?IE=UT...

  I see a lot of discussion around this issue, but nothing that was exactly my scenario.

  FWIW, I installed the one I mentioned in the original post. It is plug-and-play and worked like a charm.

• HP Envy 17 Notebook PC TS: hp envy 17, need a card WiFi dual band for 2.4 and 5 G

  What is the best wifi card for me to upgrade to?

  And is it easy enough for me to do it myself?

  It's my router: ASUS RT-AC87U Wireless-AC2400 Dual Band Gigabit Router

  @rberg51

  Sorry about that I got 3 different pages open and copied a bad for you.

  First would be the.

  Broadcom BCM4352 802.11ac 2 × 2 Wi - Fi + BT Combo Adapter 724935-001 4.0

  Second would be the.

  Intel Dual Band Wireless-AC 3160 802.11ac 1 × 1 WiFi + BT Combo Adapter 710662-001 4.0

  Sorry for the confusion.

  REO

• Can I upgrade Windows Vista 32-bit to Windows Vista 64 - Bit and preserve everything?

  I have a computer with Windows Vista 32 - Bit OS.  I have also 4 GB of RAM, but as the OS is 32-bit, he acknowledges that 3 out of 4 GB.  So, my question is, can I upgrade to a version 64 bit Vista and preserve files and programs, or what I have to buy a copy of Windows Vista 64-bit?

  Thank you

  Hello.

  No.; You cannot switch from 32-bit to 64-bit.

  It must be done with a new installation of the 64-bit operating system.

  There has never been a way to upgrade.

  You should backup your data, copy it into the 64 bit OS and reinstall all your programs

  Microsoft sells more than Vista.

  And before you buy Windows 7:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• How can I upgrade to Windows 7 or Windows 8 on HP laptop and be authentic?

  Dear Sir

  I have 3 HP laptop with Windows Vista and want to upgrade to Windows 7 or Windows 8, then you could pls advice how could I do to install new windows 7 or 8 on my laptop with the authentic version?
  and pls note the Microsoft label on my HP laptop is not clear now, (I can't read the windows vista serial #) so what can I do to keep the real window?
  Thank you
  Shehata M

  I have 3 HP laptop with Windows Vista and want to upgrade to Windows 7 or Windows 8, then you could pls advice how could I do to install new windows 7 or 8 on my laptop with the authentic version?

  and pls note the Microsoft label on my HP laptop is not clear now, (I can't read the windows vista serial #) so what can I do to keep the real window?

  Windows 8 is not production (finished; released as final product, etc.) yet.

  As far as Windows 7 is concerned, you must manually (do not rely on any software, including any made by Microsoft) check your current hardware and installed software are compatible with Windows 7.  follow these steps by making a list (model of the computer, each software package you have installed, the hardware you connect to the computer such as printers, scanners, cameras, etc.) and check the manufacturer's web page to see if they support this product at this level of version in Windows 7.  Chances are on your side, because it is a Vista machine.

  Youd

  would then buy a version of Windows 7, you can use to pass any specific edition of Vista you have and that you upgrade.  It's quite simple initially, just insert the DVD and follow the directions.  You will need to download and install the most recent hardware drivers for each component material (many that you can go to HP for via your model computer support web page, but your devices will be elsewhere...)

• BlackBerry Smartphones can not access Media card with BB Desktop or Media Sync 9700

  The other day I received a Reburbed Bold 9700 update.

  I use Ver 6 Deskstop OS and the 9700 is running device code latest version 5.

  I have a Kingston 4 GB media card that I know is in place because the 9700 recognizes it and when I go to files and select the media card, I can see all the files on the card and when I take a picture it is written on the card so I know that memory is very good and he sees the 9700.

  The problem I have is BB Deskstop or latest version of Media Sync to see so I can transfer files to and from my PC and the media card.

  The error message that I receive on the two applications, it's that I have to turn on mass storage Mode.  When I look at my memory settings:

  Compression - enabled

  Map of media Support - on

  Mass Storage Mode Support - on

  Auto enable mass storage Mode when connected - Yes

  I formatted the card successfully on the BB.

  I tried another card memory (2 GB) and also properly formatted as well.

  I also tried another USB cable into another USB port.

  I had a BB hard reset by pulling on the battery... several times.

  I had another before Blackberrys and have never had a problem of access to the media card.  I would have thought that it is easier on the 9700.

  I did search endlessly on the Web and saw other people with similar problems but many were so simple that the card is not seated properly and it also had the symptom that the BB is not recognizing the media card.  My BB recognize media cards and use them, but I can't access the card through my PC.  I understand that I may not see a pendrive pop up in Windows Explorer, but I can't understand why the BB Desktop or Media Sync cannot access.

  I know that both of these applications communicate to the BB cause I get requests for passwords and the desktop, I can view all my applications and I used to update the device until the last OS level during the troubleshooting process.

  I just wanted to see if anyone has experience this problem and has tips, if not I will contact AT & T or go into a local store to see if they can help.  I just think I'm missing something that I can take care off instead of my own.

  Thank you!

  Hello

  Have you tried to connect the device on another computer?  If another computer to recognize the device, it may just be a case of bad USB drivers on your computer.

  Here are some KB articles that may be able to help:

  KB19717 - BlackBerry smartphone is not detected as a USB mass storage device when connected to a computer

  KB10312 - impossible to display the map of support using the BlackBerry smartphone

  You also need to remove the USB ports on your computer (using Device Manager), and then restart the computer to reload the correct drivers.

  An alternative to this is to simply use a microSD card reader which allows you to use the microSD as a flash drive.

  I hope that this info is another starting point for you!

• HP ENVY BEATS EDITION 23xt: graphics card with Beats Edition 23xt want to switch?

  Hello

  I was wondering if somehow I could replace my current Intel graphics card with NVIDIA GeForce card. I am a player a bit PC and did not like the preformance of my card Intel HD 4600. I've been setting up with her for almost a year, but it was a little annoying to play games at 20 fps and low graphics, always with a lag.

  Kind regards

  UnfurledHarbor

  Sailing full.

  Sorry, but.

  Integrated video cards such as your Intel HD 4600 Graphics Chipsets are integrated into the motherboard of the system and use processor in the system (CPU) and memory to create graphics.

  REO

• problem with network card with 10 Windows and Fusion

  I can't get my network card to work as I have improved my VM to Windows 10.  It shows that permits and OK in the Windows Device Manager but disabled and cannot be enabled in network connections. This happened with Fusion 7 and continues since I upgraded to Fusion 8.  I reinstalled VMware tools, remove the card and reinstalled in Windows, remove the card and reinstalled in the settings of the Virtual Machine in Fusion.  It happens both in mode 'Share with my Mac' and automatic bypass. Please advise.  Thank you.

  As mentioned in another thread: got back to Windows 7, search, and uninstall a client VPN, re-start at level to Windows 10.  Networking, then worked correctly.