23 flash drive fails to update Firefox with Win XP

Similar Questions

• Booting from a flash drive fails with a message: operating system not found

  I tried to boot from a flash drive, but it says operating system not found. Is there something wrong, that I did? I used a program called ISO on USB and he managed to copy the installer of Ubuntu on my flash drive.

  As you try to install a Linux operating system, I recommend you this announcement in a Linux forum. Not many people on these forums will be familiar with the installation of LInux.

• How to use a flash drive for HP Pavilion p6331 with Windows Vista for backup worki?

  Hello

  While I have a master's degree, my know-how is written the text, does not not with the computer functions that are new to me.  Whenever I try to my backup job, the default setting of my Media Smart desktop assumes that my files will be sent to some separate, newly purchased drive, drive E.  However, I don't have any drive E!  I bought some DVDs but they keep rejected and cannot be written above.  Seems cheaper solution was to buy a flash drive.  I tried to save, but the menu showed that drive new E or "insert DVD."  What I need to know where/how is insert (front of the back of the Tower?) flash player and the "selection" of this option.  Do I need to buy a special cable to connect this small Lexar Flash drive, 16 GB?

  Thanks for all the words of wisdom.

  Hello leathergirl. I checked the model number on the HP website and did not find a system with this model you listed.

  You can see the card reader in the E: drive when you try to back up your data.

  You should be able to navigate to any location (by car) which is able to accept data during backups. I don't recommend that you use the backup but just Windows copy and paste all data, such as documents, pictures, music, etc..

  Unless you use DVD +/-RW disc, the DVD disc can have that data written (burned) to them once. DVD +/-RW can be rewritten several times before becoming defective.

  The Lexar 16 GB Flash drive USB should be inserted into the USB port on the front and then recognized by the operating system and drivers must be installed by the operating system.

  You should be able to copy and paste your data to the Lexar FlashDrive using Windows Explorer. Lexar Flash drive must be placed in the list of drives on the left side of the screen when using Windows Explorer.

• ESXi flash drive failed, how to recover files from her previous settings?

  I was running ESXi 5.0 off a Sandisk Cruzer 1 GB USB flash drive but the system started acting weird (slow), so I rebooted it, when he came to the server could not boot from it so, it seems, some of the files that it contains has been corrupted? Before the reboot, I was able to use the virtual machines on the server for file corruption must not have been that bad. I'll reinstall ESXi on an another USB.

  To save me the pain of the reconfiguration of the network hardware and virtual in ESXi (do not save these settings), what directory and the files would I need to copy on to get these previous settings applied to the reinstall ESXi?

  To access these files, I have to do something special to get this old USB under Windows or Linux? These operating systems will recognize the file system on it? If not, how can I get access to what is on it? Thanks for any help!

  Data on the USB ESXi drive partitions are partitions FAT, so you are able to access it from Windows or Linux. In Windows you must assign the drive letters for the partitions by using the disk management tool.

  Look for the two partitions of 250MB in size and a file named state.tgz on them. Choose the most recent two copies and copy it to the newly installed USB drive. After the initial installation, one of the two 250 MB on that drive partitions should contain files - replace the file state.tgz with the copy of your old installation.

  -Andreas

• HARD drive failed - attempt to recover with new HARD drive

  Hello

  My wife & I have the exact same model laptop computer Pavilion dv6, its hard drive has recently failed the test & stuck on the preparation of repair automatic screen

  If I create a my laptop recovery disk & load with a new hard drive installed on his laptop that work or are unique to each laptop recovery disks?

  Thank you

  Hello

  Recovery disks read one "tattoo" on the chip for the bios to make sure that they are used on the correct machine, however as long as the two laptops are identical (that is to say that they have the exact same material and came with the same version of Windows), then the disks created on your laptop should also work on machine of your wife.

  Note:  When to replace the HARD drive, choose a disk of the same capacity (or slightly more is okay) as the original - installing a drive which is lower in quality that the original often causes problems with the recovery process.

  Kind regards

  DP - K

• Why my nvidia driver fails when updating I get error 80070103

  I use the Device Manager to update my drivers, windows displays, it has no more than 15 times why?

  the nvidia GeForce 7300 LE thanks Cam

  Hello

  1. may I know the version of the Windows operating system you have? It's windows XP, Vista, Windows 7?

  2. are you aware of any hardware or software changes, prior to the beginning of the question?

  I suggest you to proceed to the next method.

  Method: Download the drivers from the manufacturer and install manually.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  If the problem persists, I you suggest to uninstall the driver and then install the latest driver on the manufacturer's Web site.

  i. go to Start, type devmgmt.msc in the search box start and press enter.

  II. in Device Manager, expand the drivers listed in the list of devices.

  III. right click on the nvidia driver and click Uninstall.

• I got a 4 GB USB flash drive to reinstall Windows 7 with her because my laptop stop error code: 80070001.

  Now, my problem is that the amount of files to 5.74 GB but my USB key can contain up to 3.72 GB. Is it possible to make smaller files on the OS DVD to fit on my USB key?

  The fact that there is 4.7 GB of data (standard DVD above to 4.7) in a double-layer DVD is about 8 GB, that's probably why. I don't know how to identify a physical support to research. I do not think that DELL uses out of the media shelf based either what I read in the following thread, Double layer is gold, while standard is Silver:

  http://Club.myce.com/F33/can-one-notice-double-layer-DVD-73307/

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Latest Version of Firefox with Win XP Pro SP 3

  I have Windows XP Professional Service Pack 3 and I was wondering if it supports the latest version of Firefox and if it works well on it. I have not updated it since 3.6.28 because I didn't really like not the look and my mother was having all sorts of problems with his and Adobe. I recently lost my Norton Toolbar which was on top during the last update for 3.6 is released. I plan on upgrading soon and I was wondering if it would work on it. My moms comp its adobe crash there and its browser sometimes won't reopen after be closed.

  Hi demonicvampiregirl,

  Have you looked at the page system requirements for Firefox 11:

  http://www.Mozilla.org/en-us/Firefox/11.0/system-requirements/

  I think you'll be fine. It has some pretty significant performance on the 3.6 series so improvements.

  Hope this helps!

• Qosmio F750 - BT fails after update 8.1 Win

  I just updated my Qosmio F750 from Windows 7 to Windows 8.1 successfully, and the windows 10 offer appeared.

  But one thing is not fair. When I go to Device Manager it shows Bluetooth RFCOMM with the! mark in the yellow triangle.

  I can get 2 messages:

  1 driver software up-to-date and
  2 windows cannot start this hardware device because its configuration (in the registry) is incomplete or damaged Code 19.

  I downloaded successfully the new battery Bluetooth for Windows 8.1 of the v9.10.32 (T) from the Toshiba site

  Advice would be appreciated

  Hello

  I do not know what WLan support for laptop cards but some Qosmio F750 models were equipped with the Atheros WLan / BT combo card.

  This module supports WLan and BT and get BT (under Win 8.1) you need to install the Bluetooth driver filter Package (Atheros package filter for driver Atheros BT card needed) and the Toshiba system driver.

• Update problem with win 7 to 8 T510

  I have a T510 just reinstalled Win 7 using the Lenovo recovery and now I'm looking to move to Win 8 to give a try.

  I'm lazy, so I just uninstalled programs that are specifically highlighted by the Upgrade Wizard of Windows 8 in the process, not those listed incompatible in the compatibility table, but those that actually prevents the upgrade of the instance Wizard. And apparently just uninstall them is not enough.

  The problem is that I don't know exactly what software is causing problems. Great thinkpad utility software seem to becoming major obstacles to the upgrade. And these drivers. However I really want to uninstall all of them and potentially found out that does not always upgrade. If I have to delete all software from lenovo, I assume a new installation be less obtrusive.

  So I was wondering if someone who has successfully upgraded could give the software or drivers that he or she has uninstalled or share another experience. I appreciate really.

  BTW, I wish Microsoft or Lenovo will come out a better Wizard upgrade who will deal with the problem of uninstalling for users. I know that Lenovo has a list of software that must be uninstalled. Are there opportunities you can make an exe or bat file this unistall all of them at once? I think that most of the thinkpad users like me still have the standard package installed as the machine arrived and it really save a lot of trouble.

  Thank you

  I think the Windows 8 package you downloaded can be used to make a new installation but also upgrade to Windows 7.

  If you run the Windows 8 package you downloaded, it should give you the ability to create a multimedia installation. Then take a 4 GB USB key, run the Windows 8 package, then select the option to install from Media create, or something to that description.

  Select the USB and it will create a Bootable Windows 8 installation.

  You can use this with your key, to create a new installation.

  I'm in dual boot on the same drive, for now while I get used to WIndows 8.

• Cannot open the driver for Roland GR - 55 with Win.7

  Downloaded the driver for guitar synthesizer Roland Roland Support but still get the message "year error has occurred, uninstall Uninstall exe." I tried many options and run as administrator, but without success, someone with useful advice is welcome.

  Their download is a ZIP file - you extract the contents of the file first? For a program to open ZIP files:

  7-zip:
  http://7-zip.org/

  To contact their support for assistance:
  http://www.RolandUS.com/support/

• Fusion 5.0.1 update problems with win screen 8 and Office 2013 preview

  Greetings!

  I have been running the evaluation version Windows 8 Enterprise 90 of Windows 8 as a host vmware OS (host of Mountain Lion operating system) and discovered serious problems when running Office 2013 preview.   In short, when I used it Word or Excel (did not PowerPoint), the screen is not correctly updated leaving lots of 'black areas '.   I understand the screenshot below (see attachment file) as evidence.  I hope that VMware Fusion staff get this rule since it's a bug blocking for you when you use Office 2013 preview.   Not having is not the last service is usable, it is certainly a serious bug in my opinion.   I can only imagine that maybe the graphics drivers for Windows 8 does not work as expected.

  If VMware Fusion staff want more screenshots, I'm more than happy to help.

  See you soon.

  Marc

  Hi friend

  The solution help?

  Thank you

• new computer with win 7 pro when it is connected to a Flash drive or external hard drive poster, you have currently not authorized to access this folder or location is not available

  There are now 4 computers in front of me.

  Two are laptops 17 inch hp (consumer)

  Two are workstations mobile hp 17 inch (company)

  On the consumer books, I can view the files on my external hard drive 1 to and 1 GB player.

  On the company workstation (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows FreeAgent GoFlex drive opening (h :)) properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (g) properties

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  This problem has been resolved.

  Right-click all methods have not access external external hard drives and flash drives.

  Sharing, permissions, ownership, administrative changes, all method all failed.

  This problem has been resolved by higher HP product support.  Other levels of support were not able to diagnose the problem or fix.

  The problem has been resolved by:

  (1) determine that he was not a NTFS problem

  (2) using the msconfig to isolate a single service

  When the unique service has been disabled the files on any external drives have been available.

  The service of the problem was the HP Client Security.

  This HP Client Security in its default value is set to deny access.

  Then right-click on the drive and change the permissions, ownership, to administrators, using everyone etc. will fail because they are all trumped by the HP Client Security that is set by default to deny access.

  When that client security is changed the drives become available.  It is not information about this when using the computer and this can be learned by trial and error.

  I hope this helps all those who have z book 17 mobile workstations or HP computers that are equipped with client security.

• How to recover from the failure of a with ESXi USB flash drive?

  I have ESXi 5.5 running on a 16 GB USB flash drive.  The system itself has a RAID card and drives mirrored where all virtual machines are stored, so it seems to me that a critical point of weakness is the drive itself.  If die ESXi itself running flash player, is there a procedure to recover the virtual machines on the disks?  Or should I keep a backup of my drive as well?

  1. How to restore the operating system assuming that the flash drive fails? If I reinstalled ESXi on a new drive of the same thumb, would see the VMware VMs existing on the hard drives of the server? Or is the process of discovery of the relatively painless existing virtual machines?

  If your flash drive goes down, will not be a problem that you have your virtual machines without danger on the separate data store in the locally attached storage drives. all you got to do is to reinstall ESXi host, he will be happy to see the existing VMFS data store and browse this data store where are stored the re-save you and virtual machines in the inventory.

  See also changes following KB to make the backup of your ESXi as operating system configuration and when you change the configuration at the time of the failure of ESXi, you don't have to worry about re-configuarting it

  VMware KB: Backup and restore configuration using the vSphere command-line Interface and vSphere PowerCLI ESXi

  1. How can I maintain redundancy for my USB failure? Can I have two drives connected and automatically backup flash / mirror the first hard drive to the second?

  This is not possible (I never tried myself) If you use an external flash drive, but let's say that you have any material to the specific provider giving this feature as

  DELL IDSDM http://www.dell.com/downloads/global/products/pedge/en/poweredge-idsdm-whitepaper-en.pdf

  or another supplier giving a similar feature, then it is quite possible to mirror. Otherwise, the best option is take config. backup using KB, I mentioned in the first answer.

• new computer win 7 pro connected to ext HD or flash drive does not display any permission or not available

  Two hp 17-inch workstations mobile (business) Z book 17

  On consumer laptops, I can view the files on my external hard drive 1 to and 1 GB player.

  On these corporate work stations (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows opening of the FreeAgent GoFlex drive (H properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (G properties)

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  Here is the new mobile workstations HP Z book 17.

  Microsoft said that HP is responsible for the operation of win 7 in the first year for the operating systems pre-installed

  HP elite support doesn't know how to solve the problem with the USB ports on the two books of Z is not able to provide access to external hard drives or flash drives

  These two mobile workstations have problems of USB port with all the ports on each computer?

  These two mobile workstations have problems of windows 7 where the client has to learn how to use the registry to store external hard drives internal hard drives?

  What does do to be able to back up files on a disk external hard drive internal?

  Have to do to be able to use flash dirves with a 17 mobile workstation z book?

  This problem has been resolved.

  The book of Z 17 HP installed their software: HP Client Security.

  This software prevents the use of external hard drives and flash drives in its default settings.

  Each customer is on their own in discoverinv and the resolution of this problem.

  There is no warning.   He made no information on why a right click on a drive and checking the property do not work.

  The way in which this issue has been resolved was by a clean boot process in msconfig.

  When miscrosoft services were hidden items that remained were read.  Systematically, some were checked and unchecked, and the computer has rebooted to see if the problem was still in existence or if the problem has disappeared.

  Whenever the hard drive or flash drive has been verified.

  We were lucky that we checked to see if it was or not HP software at the beginning.  This problem was caused by the default client security HP who were to refuse all USB connections.

  This consumes a lot of time and was so frustrating.

  On the first book of HP Z 17 thin client HP security biometric authertication failed with a black screen.  The computer is about 15 days old.    All the dirvers for the HP notebook have been uploaded and then the software for biometric devices have been downloaded.  HP determined that it was a hardware failure of the biometric device, when drivers and software downloads together has not fixed the problem.  This computer had / has the same problem with not allowing communication with any external hard drive or flash drive.

  HP did wrong by not providing any information on the inside of this product the HP support assistant.

  Here's a consumer might encounter problems:

  The HP support assistant on Z book provides updates of drivers for windows, but the support phone number book mobile z is not listed.  There is a phone number, but it is a regular support, not z book mobile support or elite support.  Mobile Z book users are supposed to call the number fo elite press and the number is for a regular support on the wizard of book z mobile support.  Support assistant has cat support method and the HP chat support is not trained to book support z mobile.  There is a feature to contact the technical support and the transfer of data to the technician, and again, it goes to regular support who is not trained to support the mobile z book.  If you call the phone number provided some of the choices on the automated line includes desktop, laptop and office work.  If you choose Notepad you won't get z mobile workstation support.  If you choose work center you will get no support of z book mobile workstation.  Instead, you must have someone answer and then ask to be redirect to support elite.  On the first call, you never know that the support you are looking for is elite support until they give you this information on the next contact.

  After many hours spent barely pull on the problems of not being able to view files on an external hard drive or external dirve flash, I was able to change this HP software.  It now unfortunately produces a humming noise when parts of it are displayed.  This has not yet been set.

  It is the customer of HP security information:
  
  http://www.HP-ProtectTools.com/downloads/PDF/HP_ProtectTools__EnterpriseDeviceAccessManager_Whitepaper.PDF

  There was no information to reconfigure the software in the white paper.

  I was able to find a user guide.

  This guide was not and was not available through the HP support assistant:

  http://h10032.www1.HP.com/CTG/manual/c02292692.PDF

  Hope this helps all who are unable to view the files on their external hard drives and external flash drives.

  The thin client HP security prevents click right change of ownership and prevent changes, right-click in the security, etc..  Change of Director fails also as the client security administrator HP overides too.

  So end users must change the HP Thin Client Security so that it does not block access to files on external hard drives or flash drives.