can you use all-in-one printer (HP 2430) as your only, after that scan glass is broken

Similar Questions

• 5740 HP e-all-in-one printer: how to change the destination for the scans folder

  I bought a HP Officejet 5740 e-all-in-one printer I connected wireless to a Win 7 PC. A month later, I added a new win 10 PC in my network (LAN), and I also installed the printer on this new PC. When I went to scan a document using the HP (NO Windows Fax and Scan) print software, the printer asked me which PC to scan to, and I chose the old Win 7 PC. The scanned image went to the folder My Documents\My scans of Win 7 PC, as expected.

  Two questions, both assuming I want to use the HP software to scan:

  1. is there a way to set a default value of PC to the computer target for digital images?

  2. How can I change the folder to which scaned images are sent?

  What are the answers to these two Qs if I decide to use Windows Fax and Scan instead of the printer software?

  Any help would be appreciated.

  Roy

  Hi Roy,

  Yes, you get a more integrated experience if you install the vs HP software by using the Add method of the printer.   And Yes, you should be able to do much more PC software rather than on the front panel of the unit.    And Yes, the aspect analysis software PC is much better than the Windows Fax & Scan.   Windows Fax Scan & gives a good experience of the box and is sufficient for many, but for those who want to do more, such a framing auto, rotate, reorder pages, etc... the HP scanning software is much better.

  I forgot what version of HP comes with your OJ5740 scanning, but we she recently rejected a new more complete solution that comes with the version that installs for your device recommended.   Here is a link where you can get that below.   I recommend you to install the latest web downloadable full version for your device first.   Then install this

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi for Windows.

  You'll then have two versions, one called "HP Scan" and the other called "HP Scan extended.   If you find that "HP Scan" looks like 'HP Scan expanded', while the product was the version latest (we drove to this new version about 2 years ago).

• can I use all in one series printer series to efax instead of fax data modem?

  Hello
  Can I use 'everything in a series' printers (printer, scanner, copier and Fax) to receive faxes in my Inbox? i.e. efax, otherwise let me know on the hardware that is used to receive faxes in computer science.

  You can get an Efax service but it's not free.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• 27 - n102a: can I use All In One as a second monitor?

  Hello!

  I have a couple of laptops and would like to know if I can use my HP 27 - n102a as a second monitor for them. One is an HP revolve 810 and the other is an Asus, well that do not know if it matters.

  My HP turn seems to have a DisplayPort and my Asus has a mini HDMI port.

  Thank you!

  Hello

  No, the following link shows its specifications:

  http://support.HP.com/SG-en/document/c04869600

  It has the HDMI port on the back

  Figure: SunstreakerT back i/o ports

• Why my all-in-one printer HP Photosmart 4780 now only print all other lines of the document

  My printer was working fine two weeks ago and now he decided to print only all other lines and some lines that print also have a pale line through it runnung. I have Windows XP. I uninstalled and then reinstalled the printer but the problem is still there.

  This problem is now resolved. Again, I changed the black cartridge and now everything is ok. I threw the defective cartridge.

• All-in-One L7550: all-in-One printer L7550 stop working after a Win 10 update

  In the last two days my printer has stopped working after many updates to Win 10.  Functions in fact any printing has stopped (swirling points) to include my PDF SW.  I downloaded the last SW all-in-One and tried to install it.  The first thing that happened is that he tried to remove the previous SW.  Hooked to halfway through it.  Then, it was a nightmare.  I can't get the rest of the SW uninstalled nor can I install the latest SW.  I even tried to install the previous SW in Win 7 compatibility, but after extraction it just stops.  Tried to install the current version in Win 8 conpatibility, but it also wrong on.

  Any ideas wher can I start?

  Welcome to the Forums of HP, @CharlieCC,.

  I hope to help you with installation and uninstallation issues you are having with your Officejet L7550 on Windows 10. Before you get any software troubleshooting, try to make a copy of the front of the printer. If copies work fine, continue with the steps below to work on the issues of software!

  Step 1: perform a level 3 Uninstall to remove completely all the files to your system printer.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop: all-in-one printer, HP Officejet Pro L7550
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe (or .bat).
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• Scanning continues to not work for Mac OS 10.6 and 10.7 for all-in-one printer, HP Officejet 6110

  Scanning is broken in Mac OS 10.6 or 10.7 for all-in-one printer, HP Officejet 6110. It seems that only old versions of Mac OS will scan. I realize than products account "age" but it's really - poor behavior that HP and Apple cannot support such a function based on a very popular printer.

  Information on scanning support is circular at best and misleading at worst. A Bulletin Board suggests the purchase of a third party program to do the scanning 'work' for the Mac. Terrible.

  There should be a patch for it. It is really unacceptable and tarnishes the reputation of Hewlett-Packard and Apple.

  (Forgive me if this sounds like a sales pitch, it is not intended to be, and I'm not in the sale by any means - it's just the logical thinking process, I would in your situation).

  Option 1: Get Vuescan

  Pro - you can scan... as long as the printer is working.
  Con - given that electronic devices are usually only expected to last 5 years or more, your 6110 could go at any time, hence the need to upgrade. Improved printer support the most recent OS and the need of Vuescan would go, resulting in a loss of $40.

  Option 2 - upgrade
  Pro - new product will be compatible current OS with a complete solution, have more physical features than your current product and a warranty.
  Con - it's pocket money-, but looking at the Con in Option 1, you could potentially spend AND pay $40 for additional software, so in the grand scheme of things, it would be the least expensive option and best bang for the buck.

  These are my thoughts on this subject, take them for what they are worth. Whatever you decide, I hope everything is working well for you and happy that you have found an alternative solution (always nice to have more options)

• HP Envy 4500: Cannot print Photos and large documents on my HP Envy 4500 all-in-one printer

  Hello

  I bought my Hp Envy 4500 all in November last one. It worked like a charm for the first 2 months. I tried to print photo 4 x 6 a day. 2 first impressions were good, and the third image has begun to fade from the half. Documents not threatened by more than a few pages. I tried to uninstall/re-install, printing via USB, set static IP address on the print and followed by other solutions on this forum. I was lazy to lift a question myself on this forum. Now, I'm totally frustrated and disappointed by this product, I wanted to just try my luck.

  Help, please!

  Thank you

  Fox

  Hey @Kvelrajan,

  Welcome to the Forum from HP Support.

  I understand your ENVY 4500 HP e-all-in-one printer is not printing documents to the end and there is a print quality problem when you print photos.  I would like to help.

  I have some suggestions that can solve these problems.

  First, I recommend that you only perform a "hard reset":

  1. press the Power button to turn off the printer.
  2. unplug the power cord at the back of the printer.
  3. wait 60 seconds.
  4 reconnect the power cord to the back of the printer.
  5. press the power button to turn on the printer.

  Click on the title of the following article:

  HP printers - HP wireless built before 2010 printer print a partial Page or fails to print all Pages in Windows 8

  Try Solution two.

  If this clarify two questions, great!  If this solves the problem of document but still the problem of print quality with photos, click on the title of the following article:

  Printer prints a blank Page or does not print black ink color for the HP ENVY 4500 and Deskjet Ink Advantage 3540 e-all-in-One Printer Series

  Work your way through the Solution one and go until you are satisfied with the print quality.  Test photo print - does clarify the issue of the photo?

  Please let me know the result of your troubleshooting by responding to this post.  Feel free to click on the "Thumbs Up" icon below, if I solved your problems.

  Have a great day!

• all-in-one printer, HP Officejet 4315xi range & hp Pavilion with Windows 7

  Printer has said he is ready and he is printing of the document that I send to print, but nothing happens. does not print.  I ran troubleshooting program.  Have tried everything I know without success.  Can you help me?
  Thank you

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP Officejet 4315xi all-in-One Printer - drivers<- set="" to="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=1138347&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP Officejet 4315xi all-in - One Printer - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=1138347&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Officejet 5610xi All in Pri: blank page fate when I try to make a copy on my HP 5610xi All In One Printer

  Recently, I get a blank Page when I try to copy anything on my HP Officejet 5610xi All in One Printer.

  Hello

  I understand that you get a blank page while trying to copy.

  Make sure that the printer is connected directly to a wall outlet, not a surge protector.  If this fails to resolve the problem, please follow the steps from the link below.

  Problem copying

  Give Kudos to say 'thank you' by clicking on the "icon shots."

  Click on 'accept as Solution' if it has solved your problem, while others may find it.

  Although I am an employee of HP, I speak for myself and not for HP.

• All-in-one printer C410

  How do I correct the time on my of C410 all-in-One printer

  Go to your SETTINGS on your printer.
  1. choose Preferences
  2. date and TIME

• 64-bit driver for Canon imageCLASS D860 all-in-One Printer

  someone at - he found a driver 64 bit Windows 7 that works for Canon imageCLASS D860 all-in - One Printer?

  someone at - he found a driver 64 bit Windows 7 that works for Canon imageCLASS D860 all-in - One Printer?

  Canon does not support that particular product under Windows 7 x 64.

  They argue as well, "Canon imageCLASS D860: this product is compatible with Windows 7 32-bit." There are no drivers for Windows 7 64-bit. "and"No 64 bit drivers are currently available for this product SOHO.

  Unfortunately - Canon has decided that this particular product is a legacy.

• can I use XL 364 cartridges in color in my photosmart c309g all-in-one printer?

  My photosmart c309g all-in-one printer has a cartridge black 364 XL and smaller for the colors. Color XL cartridges can be purchased in stores like Media Markt. Color cartrideges XL fits my printer?

  Hello

  Yes, the XL 364 cartridges are compatible with your printer, as you can find below:

  http://support.HP.com/us-en/document/c01842734

  Kind regards

  Shlomi

• Can not scan using Savin 8045 All In One printer/copier/scanner

  Original title - scanning problems

  I connected a Savin 8045 All In One printer/copier/scanner of my Dell Vostro 470 computer via a cat 5 cable and router. It prints wireless and locally but not scan.

  Hi TomMargiot,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. do you receive any error messages?

  I suggest you to uninstall all in a printer\scanner\copier and install it again and check if it helps.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  If the problem persists, I suggest you to contact the Savin Support for assistance.

  http://www.Savin.com/global/support.aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Can't scan on HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar?

  How scan you on an HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar? Whenever I try, I get the following message:

  Error message: Scanner reported an error - unable to open a session on the device.

  Hi Irossga,

  This document explains how to use the built-in features to your operating system to scan photos and documents.