2nd time cloning

Similar Questions

• Outlook Express downloads e-mail messages for the 2nd time which have been read and deleted a few weeks ago.

  Outlook Express downloads e-mail messages for the 2nd time which have been read and deleted a few weeks ago.  This happens periodically.  Repeated messages are usually a week.

  Maybe they are still on the server (server of your ISP). Make sure that you don't leave copies of messages downloaded from the ISP server that may cause duplicate messages to download.

  It's the only thing I can think of.

  If you are unsure how to check your messages via the Internet site of the ISP, then check with them about how you do that. TaurArian [MVP] 2005-2010 - Update Services

• The user profile Service has no logon (for the 2nd time)

  I have Windows Vista, and this is the 2nd time in a few months this product. The first time that I could remedy this by following this tutorial.

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  But I can't do it twice, because I already have a folder with a .bk to the end and the other without the .bak. So I can't rename the files, so neither solutions work. And I can't do a system restore because it screws my McAfree upward. Please can someone help me?

  Hello

  The .bk is only a backup on the 1st operation comes off so you can listen to.
  You can also use .bz (or something else) instead of .bk to this effort. The important
  part is to save the old profile before you rename the .bak.

  BTW, there is a good chance that McAfee is the first cause, or at least getting worse, this question
  to verify the message options.

  ----------------------------------------------------------------------------------------------------------------

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Download DVD Photoshop for the 2nd time

  I updated my windows 8 PC and therefore having to download my photoshop 11 and Prime Minister 11 DVD for the 2nd time, the Prime Minister is OK the photoshop won't download, they were both very well the first time? d

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  Photoshop/Premiere Elements 11:

  l http://prodesigntools.com/Photoshop-Elements-11-Direct-Download-Links-PSE-Premiere-pre.htm

• Satellite P750 stops at the start of the 1st time but then works great 2nd time

  Hello
  My Satellite P750 always stops on the first time every day, but the 2nd boot works fine and no other problems...

  I press the Start button and it runs for maybe 10-20 seconds then stops... She does both on battery or power outlet...

  If I try to start again after that, it starts fine... sometimes, it gives the possibility to start in safe mode, or run the Startup Repair tool, but it always starts well and works normally...

  I tried to start repair when the option was given, and it is immaterial that the next day, he does the same thing again...

  Any advice appreciated, and Im a bit concerned that one day he did not start the second time...

  The laptop is only around the age of 6 months and otherwise runs great...

  Thank you

  Hello

  Recovery of the laptop back to factory settings.
  You use the Win 8 or Win 7 system?

  Usually, books Win 7 supports a HARD drive recovery by pressing F8-> fix my computer-> drive HARD recovery.

  If the same problem appears on the right after the system has been recovered, I guess there is a hardware problem and a technician must check the hardware parts.

• MacBook Pro 2014 - failure of the graphics card for the 2nd time in 2 years - no guarantee

  Hi all

  end of 2014, I bought a new 13 inch Retina Display MacBook Pro mid 2014 model (A1502, EMC2875). A few months later, the graphics card has failed - no obvious reason. Apple replaced. Now, the graphics card has not yet. Still, the mac worked perfectly well (no overheating of the noise, nothing) and all of a sudden - no understandable reason or external actions, the graphics card has failed. Unfortunately, I do not have a guarantee of more. At least, I can access my documents by connecting two Macs, so I hope that the material is not affected.

  My model (1502) apparently only has a single integrated graphics processor.

  My questions:

  • After some research, I discovered that Apple used to have these problems with the 2011 edition. They have implemented a replacement program. Does anyone know sth on this subject?
  • What graphics card would you recommend? How much such a graphics card? Where could I buy a cheap?

  Of course, I don't want to reuse the same type - guess I don't have to explain how @* #&! I'm after two times the same problem within two years after the purchase of a brand new MacBook Pro...

  I would appreciate any recommendations and links!

  Best regards

  Rahel

  -As you say, your Mac model uses the graphics processor integrated in the CPU chip. So, there are ios no replacement possible. The CPU is soldered to the logic board

  -The problem with the 2011 MacBook Pro was with the discreet Nvidia, not the graphics unit integrated in the CPU graphics unit.

  -When you went to an Apple store just says the genius of APple?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop.

• adding the 2nd Time Machine disk backup capability

  I have a Mac pro OS X 10.11.5 with two discs devoted to the backup. When I wanted the first filled to the top, then add the second to continue archiving backup files.

  I don't want to lose my older archived data in backups on disk 1.

  What happens when I add a second drive to add capacity to the Time Machine backups?  Once the first drive is hard full TM then will use the second drive until it is full?

  When you add the second drive, I get a warning that the TM will take turns using the disc 1 and disc 2. But 1 disk is full. TM will not delete old information on Drive 1 to make room? If Yes is not good because I want to keep the old data. I just want to keep incremental backups to Drive 2.

  Please specify the feature.

  Yes, TM will continue to save on disk 1 and delete older backups and take turns with disk 2. If you want to keep 1 as it is by car, then you must remove it from the list of backup. Start a new backup on disk 2, and continue. In both cases, the disc 2 will make a new full backup of your computer.

• 2nd Time Capsule

  I currently have a TC 3 TB connected to a cable modem. I turned on the signal my cable modem wireless turned off and use the TC as my wireless network. It works perfectly and I am very happy with its performance. I had just bought a new iMac and want to use a second TC (2 TB) to back up my new iMac. The new TC (2 TB) will be in my office about 50' of my TC 3 to in the family room (where the modem is located. My question is can I use the second TC to "extend" my network, and also use it to back up my new iMac. The second TC (2 TB) will not be connected to the first (3 TB) but the iMac can be connected to the second TC with ethernet if it would help. Can I use two cameras on the same network. Thanks for the help. I love Apple Support communities.

  My question is can I use the second TC to "extend" my network, and also use it to back up my new iMac.

  Yes, but unfortunately there will always be a significant loss of performance on the network when you try to "expand" using a wireless connection between the time Capsules, or any other router from Apple.

  On average, you should expect to lose about half the maximum speed possible on the network when you extend this way using a wireless connection between the time Capsules, and it assumed that the second Time Capsule will be located at a point where he can receive a strong signal the first time Capsule wireless.

  For example, if you need surplus more wireless signal in the vicinity of the iMac, and then the second time Capsule should be located approximately halfway between the "main" Time Capsule and the iMac.  In other words, if you need better wireless coverage in the vicinity of the iMac, it would be a mistake to locate the second close to the iMac Time Capsule, the Capsule will pick up the same weak signal in this area, and there is little if anything that was acquired by 'extension' of the network with a weak signal.

  You can avoid the degradation of network performance and improve reliability as well if it is possible to use a wired Ethernet cable connection connect the two time Capsules.

• HP 500-281: does not start a 2nd drive cloned in sata1

  HP 500-281 desktop

  Win 10 home

  BIOS MEMv80.22

  Short version of the latest issue:

  Fine Win10 after upgrade to 10 at the start of the hd0 in sata0 slot (original). HD1 in sata1 slot is a new clone of HD0 (Win10, using Reflect). HD1 and its files in Windows more HD1 is seen in the BIOS. If the boot order is changed in the BIOS will not start (sata1 above sata0), saying "no boot disk. Boot order reset default (sata0 and sata1). If the HD0 data cable is disconnected, does not start, once again "no boot drive" Boot order is reset by default. Cable data Sata0 off HD0 and HD1-connected, with no data connection to HD0. Now, she starts to HD1. How to start the HD1 connected to sata1 with or without HD0?

  Greetings,

  UEFI is ruthless.

  The cloned drive should be connected to the port SATA (SATA0) where the source drive has been connected.

  The cloned drive does not start on the SATA1 without modification.

  See you soon!

• BlackBerry Smartphones my curve ORDER receipt EMAIL - 2nd time that this happens... Help

  I've had my BB for a month and already two times it has been impossible to get messages from my email accounts.  The hourglass keeps appearing on the screen... so frustrating!  I tried to turn it off, take the battery out and empty the cache.  The last time that I have saved on my desktop, wipe the device and it recharged.  I prefer not to do that every week... Is there anything else I can do to get the emails which crosses again?

  Hello

  Make it a habit to check your memory two or three times a day for a few days.

  Not enough memory could cause this condition. In this way, we can see beforehand if

  We're heading or a low memory condition. Your model should never drop below 15 MB

  now, you have relatively 36 MB of free space.

  Or if it happens again go to service connections and make sure your connections

  are available, then go right to the bottom of the screen and go to the mobile network menu press options and

  Select the diagnostic test, it will generate a log that you can read and send later for your carrier.

  I would then immediately go to options/advanced options / and go to the host routing table, click on for

  Enter, touch menu, select Register now. This register your phone on the network, get the latest version

  carrier to the updates, sell as service books. This will bring about stopping e-mail by updating the

  process. You will receive a verification email when they were sent.

  Finally, I don't know your level of experience, so if you know I'm sorry but if please read and let me

  not know if this is the case.

  Most people close the applications by pressing escape or the red button. This does not close the applications.

  Each application has an option CLOSE. For example, if you are in the calendar, press the menu key (spotted) and scroll down to the bottom CLOSE is listed. Go through each application and then press close. Go to the menu press browser and options select cache operations clear all categories and reached escape it will say cleaning memory.

  Go to options - security - garbage collection - enable. The BB will now clean up the memory when idle for 5 minutes.

  you will have an icon on the screen to clean the memory of you make sure you press it. Make sure that you use the button CLOSE whenever you're done with an application.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8300&message.ID=9225#M9225

  If you follow the link and stay with your memory your phone will run smoothly.

  Lets leave the thread open and happen if memory is low or the condition happen again.

  Try to write down exactly what was going on with the phone at the time. Take a call,

  send/receive texts email surf the net. I know it's a lot, but random problems are the

  more difficult to identify.

  Let us know,

  Thank you

• How to download DW for the 2nd time without using CC.

  My hard drive has been corrupted and I lost all my software including DW CS5.5.

  
  

  Can someone tell me how I can download this for the second time on my new HD, better yet give me a link.

  
  

  • I downloaded and bought in full, not on the CC, would be the same as before.
  • 'version' (buy / trial) can I download what I can enter my serial number, I.

  Thank you very much.

  You can get versions no - CC program Adobe here: download and Installation Help | Download and Installation Help

• I want to complain and cancel, you charged me $ 50 for the 2nd time and I got a lot of 29 usd

  I don't want to pay more that you charged me more each time

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• Button click slide 1st time, opens URL. Click on the 2nd time, URL opens and jumps to the next slide.

  Well, I'm really confused here!

  I have a project that is created where on a screen, I www.xxxx.com and I put a button transparent, so when someone clicks on it, it opens a new window and opens the URL.

  This works.

  Here's the question, when I got back to the project and click on the link for the SECOND time, it always opens a new window with the URL, but it ALSO moves to the next slide. Nuts!

  Can someone tell me what could happen? It's so weird!

  Here is a screenshot on the properties of the button and the blade in the bottom of the screen.

  

  

  Hello

  A number of things here.

  First of all, I would never use a Transparent button. Try a Click Box.

  Second, when you added the URL there is also an option to 'continue the project to play. " You guarantee that was unchecked?

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• DataGrid and & quot; change & quot; the event, called 2nd time problem

  Hello
  
  I have a datagrid and I use the attribute 'change' to call a function when you click on an item in my datagrid. I use the change attribute because I still want the columns to sort by the column header. In any case, it works the first time around, but if I click on the same element in the list, it does not yet have my function.
  
  When you click an item in the DataGrid I call the 'navigateToURL()' method and it works the first time, but when you click on the same item in the datagrid control, which is not, I guess he thinks there is no change happening so it does not have the function to call. He's right there.
  
  Any help appreciated.
  
  -WestSide

  try to use itemClick

  E.g.
  Script:
  public void clickItem(e:ListEvent):void {}
  If {(myDataGrid.selectedItem)
  navigateToURL()
  ......
  }
  }
  
  ......

• Unable to connect a 2nd time.

  Hello!
  I have Asus AT3N7A-I with build-in bluetooth and W7.
  Try to use the battery Toshiba BT to connect my phone to pc and send GPS data to it.
  I'm creating new connection by selecting to send data at COM40. May soft navigation, I also put this GPS receiver
  is on COM40. AND it works very well - after I click 'find GPS' in navi soft, PC will automatically connect to the phone and receive data...
  But if I close the connection, IT won't WORK again! I have to delete connection and recreate. Even if restart the phone and your pc, it does not connect again.

  any body can help me?

  Thanks in advance.

  Hey,.

  Hmm I think that s is not a problem of Toshiba. You will need to contact your computer or mobile phone manufacturing manufacturing. They should learn more about their products and how to support them.

  Normally on your computer that a Bluetooth software must be installed in a way I put t understand why you use battery Toshiba BT

  In any case, get in touch with the guy and ask for help ;)