HP 500-281: does not start a 2nd drive cloned in sata1

Similar Questions

• Windows XP does not start, no hard drive error

  I have windows XP installed on my hard drive of 160 GB WD Scorpio Blue PATA on a DELL Latitude D600. One day, I wake up and my laptop does not start. My computer starts up, leaves POST, but the hard drive does not start. He's right there. I try pressing the buttons but it starts a sound signal, so I have to turn it off. Normally, if there is no device that my computer can boot from it displays something along the lines, "no main boot device found. Press F1 to retry boot or F2 to enter the configuration utility. "but the screen does not show anything.
  I ran chkdisk and a number of other diagnostic tools on the hard drive, but nothing helped. I have Ubuntu on a USB key and with him, I can access the files on the hard drive - all files are intact, and I can read/write without problems. It just does not start.
  How would I go about fixing this? Any help is appreciated. It is the third hard drive that has failed inside my D600 (my second WD). I've had enough of this!

  Try to use the last good known Configuration:

  http://support.Microsoft.com/kb/307852

  and see if that clears things up to the top.

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Pavilion 500: PC does not start.

  I recently installed Windows 10 preview alongside Windows Enterprise 8.1, due to the fact that I could not install the latest version of Windows 10 preview 10041 I tried fiddling around with my boot partition, consiquently I can't boot my machine at all is to say does not provide BIOS/UEFI & all I get is a blank screen.  I tried to start my 8.1 Windows Pro CD & nothing, infact my PC does not detect the CD at all.  I also deleted my partition to restore HP 'yonks' (plonker!) there.  Peuvent some please help?  I have three partitions on my drive, there are W10, we have W8.1 Pro and the third has all my documents & photos etc.  My boot default OS saw W10.

  Thank you for the additional information.

  I carefully read your original post.  I think your best option is a system recovery.  Given that you have deleted the recovery partition, you must order the HP discs:

  http://support.HP.com/us-en/product/HP-Pavilion-500-000-desktop-PC-series/5358992/model/5403158/document/bph07143/

  So, I suggest to use a second hard drive to install Win 10.  It is the best way for dual boot.  When you have two OS' are on the same drive there is a lot of room for error. especially when installing a less stable version.  Win 10 is exactly that.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• D30 does not start after adding drives to the UCS ports

  Hi all

  I have a Lenovo D30 workstation.

  I have my SSD on sata RED ports, and port orange is the DVD unit. So far so good.

  I added 4 drives, connected to the blue sata ports (reader1 4) while the system worked. I launched rest Intel and created a RAID5 volume. All work of until reboot. At the power, I'm looking to a flashing cursor, just after the message 'press enter to...'. In the BIOS I have excluded from the disk 1 to 5 ports such as boot (on 3 different from the menu) device.

  If I take the readers the system starts. After you add the I have to go back to the RAID and also workt fine. But I don't want to recreate the RAID unit after each reboot.

  I made a rookie mistake?

  Hello

  Type: 4354

  The machine is in UEFI

  The option does not appear in the BIOS post screen, however, if you press CTRL-I during post, then the rest option appears. It shows the right RAID config and all 4 disks are visible.

  Discs: 4 x HGST 7K 1000

  Note: This is the drives 2.5 ". I use a 4 Bay of Startech unit to mount in a 5.25 Bay in the system.

  http://www.StarTech.com/nl/en/HDD/mobile-racks/4-drive-25in-removable-SAS-SATA-mobile-rack-backplane...

  The bootdrive is a Samsung 850, 500GB connected to the SATA0 port.

  The system didn't need to start fron all the RAID, but only from the SSD.

  Edit: I deleted the RAID for the rest for the post. Created a RAID5 set and restarted the D30.

  Guess what... it starts as expected. The RAID5 volume present in the W10 and works very well.

  What is the difference in the creation of a whole in the rest menu during post and create one of in W10 RAID?

• I have a Pavilion dv6604nr and it does not start. the lites drive and then more nothing.

  I was using the computer and all of a sudden my screen looked like a candy cane horizontally.  I took the hard drive and not been able to get a bios screen, I'm looking for suggestions or the type of case I can buy to use my hard drive.  I bought a 2.5 from best buy and it does not match.

  Hello:

  You need to get a USB to SATA 2.5 enclosure "HDD.

  Have you thought about the plug of hard disk drive?

  The thing that looks like this?  That is removable. Just shoot.

  

• Tecra 500 CDT does not start. Please help with CP

  Hi all

  I have an old Tecra CDT of 500 which, up until yesterday, worked fabulously. Now for some reason it starts at all. No matter how long you push the Start button on the side, he shows no signs of life at all. It's been hot here lately so I wonder if it's suffering "heat exhaustion! Seriously, clues as to what could have caused this problem and how to overcome it would be greatly appreciated. It has been used much more recent than usual and for hours. Is this likely to have helped him give up the ghost?

  I hope someone out there can help.

  Thank you
  Dynamo-dom

  Hi Dominic,

  It would seem that your laptop has developed a hardware failure, either with the current power switch the PSU internally. I think that your only action now is to contact a service partner and ask them a price that it be repaired.

  Good luck

• Satellite Pro A10 does not start - no hard drive

  MY TOSHIBA SATELLITE PRO A10 PRIMER NOT.
  WHAT I GET IS NO DRIVE DETECTED. TRIED TO REINSTALL XP BUT STILL NO LUCK.
  CAN EVERYTHING-ONE PLEASE HELP AS I AM PULLING MY HAIR OUT TRYING TO THINHK HOW TO SOLVE THIS ANNOYING PROBLEM.
  DOES ANY - ONE KNOW WHERE I CAN DOWNLOAD A RECOVERY DISC SO I CAN TRY THIS OPTION.

  Hello

  HARD drive is visible in the BIOS?
  If this isn't the case, then this means that the HARD drive is faulty.
  Try to replace the HDD with a compatible and try again.

  Good luck

• My C50 - B Satellite does not start from the HARD drive

  Details of the machine: -.

  Model number: PSCMLA-03F07Q
  Serial number: XE343127P

  Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

  Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

  I reduced the possibilities to a fault of BIOS, reasons.

  System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

  The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

  1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

  Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

  Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

  I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

  See you soon,.

  Andrew.

  Hello

  From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
  HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

  What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

  Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

• CD player passes all tests but the computer does not start from cd player

  CD player passes all the tests, but the computer does not start from cd drive. entered the bios and it specifically indicate to boot from the cd drive. Windows 7 installation disc does not start. Win 7 disk works in another computer to start. Why is it not this cd player read the disc and from the win 7 installation process?

  I see this problem on systems having older IDE and SATA drives requiring firmware updates and assigned to the region 1 aka they boot from XP CD, but not DVD windows 7or media.

• Qosmio X 500 does not start and the power LED is flashing every 5 seconds

  Hello
  I need help my X 500 does not start now. I tried to launch the NB as usual and suddenly the X 500 start or even power up.

  If I press the power button / stop it makes no noise, the power LED on the button and the second power LED just bliks once and turns on and keep blinking every 5 seconds.

  I tried to:
  * Remove battery and power up with AC only
  * power only to batteries
  * remove the battery power button hold for 30 seconds and over power with AC, battery only athen

  but it did not help.

  I checked the LEDs AC & battery, but they do not blink, they are just RED, so there is no problem in battery or AC.

  No idea where could be the problem?

  Thanks for help
  Frantisek

  Hello

  The failure of RAM could be the reason for this behavior of the laptop.
  Remove the RAM modules with good modules tested and check the functionality of the laptop.
  In the case of RAM isn t the troublemaker, the motherboard could be affected.

  Good luck and share your experience with us.

• Adding 2nd NIC (pci express gigabit) to DC7700p. Now, it does not start.

  Adding 2nd NIC (pci express gigabit) to DC7700p.  Now, it does not start. Can not pass boot F9 or F10 Setup Menu. Or the boot or installation menu is accessible.  Any ideas?

  Hello:

  The PCIe slot on a dc7700 usable only for a PCIe video card. If you want or need to add an additional NETWORK card, you need to add a PCI NIC.

  Paul

• Recovery partition is there but does not start Recovery

  Hello
  
  When you try to restore the image (F11 at startup), the laptop seems to be as he tries to start missing Windows installation (Windows Boot Manager error page).
  
  Partitions 'SYSTEM', 'HP_RECOVERY' and 'HP_TOOLS' have not been affected. Recovery files of ~ 15 GB are still there!
  
  The Windows (2nd primary) partition was deleted and then recreated as an NTFS partition. Since then, the recovery process does not start.

  How can I restore my intact HP_RECOVERY partition system without using recovery DVD? (I can't access right now.)
  
  The partition Windows has need of a specific disk label? What is the magic that breaks the recovery when an NTFS partition is all simply deleted and then re-created?
  
  Peter

  HP ProBook 6550 b (WD701EA #ABD)

  Solution: How to fix F11 penetrates is not in the Recovery Manager process

  You will need:

  -This fix by HP: difficulty to the Multi-partition HP Recovery Manager (the ProBook 6550 b is not listed as a supported model, but it worked for me)

  -installation of Windows (see partial solution above) a job to install the fix on your ProBook

  or

  -sufficient knowledge to extract the winre.wim missing the fix above, copy it to your recovery partition and to apply any measures necessary (I did this)

  Steps to follow:

  -in your work on your ProBook Windows installation open the file downloaded "sp48415.exe".

  -the files will be extracted in "C:\swsetup\SP48415", open this folder in Explorer

  -Right click on "F11SPFix.cmd" and run as administrator

  -the patch will be applied

  Restart und press F11 at startup to enter your recovery Manager (hopefully) fixed.

  Credits to HP support.

• Win 7 does not start after the creation of new partition for fileswaping.

  Hello!

  As the header says, Windows 7 does not start. Made a partition to swap files between OS X and Windows 7.

  I saw in a thread that it could be repaired using fdisk. I'm really new to OS X, so I did not really

  know what to do. Writing the result of the controls, I found in the thread.

  I know now there is a warning to the partition AFTER installing Windows.

  Would really appreciate if everyone took some time telling me what to do!

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage MacBook Hoveddisk 382,5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database FILDELING 16.6 GB disk0s4

  5: Microsoft Windows HD 100.0 GB disk0s5 data base

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 382,2 disk1

  Logical volume on disk0s2

  AD4E7A3F-9F8E-4734-8B4B-B65587CDD2A1

  Unlocked encrypted

  Fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AC 1023 254 63 - 1023 254 63 [409640-747116216]

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [747525856-1269536]

  4: 0 b 1023 254 63-1023 254 63 [748795392-32403968] Win95 FAT-32

  TPG - v - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 747116216 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  747525856 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  748795392 32403968 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  781199360 262144

  781461504 195311616 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  Please after the release of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

  You see the Windows files in the volume of training using the Finder?

• 4540 proBook s does not start after stopping

  Brand new Probook s 4540, B7A48EA #BED, of the box. Memory 4 GB DDR3, 500 GB, processor i3, SUSE Linux disk.

  I have install the battery, connect the power supply and turn on laptop. Linux installation started, got the message 'creating recovery root tarball' and wait, wait and wait with the same message of Linux. I rebooted the laptop and after that got Linux message 'Cannot find size info part of recovery' and restarted itself, every 120 seconds.

  I turned it off, by pressing the power button / stop 5 sec.

  After that, I can't turn on laptop. When I press the power button / stop, power, drive, browser and Flash of LED wireless, you can hear disc trying to turn but fail and all the lights go out and about 2 seconds later all lights flash once again, drive tries to spin but fail again and laptop does not start.

  I have 'power reset', updated the BIOS (F.40), removed the drive and DVD drives, tried without battery but no change in behavior. I returned the drive and the original DVD. After removing the memory, portable lights, as if, and caps lock flashing of LED 3 times which means error memory. After that, I did a "reset power" once again, reinstall memory and try to start the laptop. After pressing the power button / stop at the beginning I had same symptoms I described, and after 2 portable seconds began. I installed Windows 7 Pro. Laptop computer can be restarted Windows, but after stopping, he can't press start button to start / stop.

  One way to start is to move the memory in the other slot, but it cannot start after his stop. After his return in the first memory location can be started again until the next stop. And when start, does not start from the beginning, but after 2 seconds, for his second try. The BIOS memory test, the EFI system diagnostic and memtest86 has errors. I tried with different memory module but got the same symptoms.

  Should I change a motherboard?

  After replacing the motherboard (systemboard), everything works.

• HP G72 laptop: HP G72 laptop does not start, error code of disk hard when you use HP Diagnostics

  I have a laptop G72 and it will start, but Windows 7 does not start. On using diagnostic tools in the start menu, my hard drive and my departure fail their tests, with both giving me this error code:

  UCUFWF-56C81D-XD003G-60WF03
  

  No idea what this means? Help is appreciated.

  Hello

  You are welcome

  Your computer is listed as coming with a 320 GB hard drive, but you can also easily install a 500 GB HARD drive if you want a little more space - the player on the following link is an example that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 50 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, see if you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Best regards

  DP - K