Unable to connect a 2nd time.

Similar Questions

• Unable to connect using Face Time after updating iOS 9.3

  Unable to connect using Face Time after updating iOS 9.3

  gshort319 wrote:

  Unable to connect using Face Time after updating iOS 9.3

  Use FaceTime with your iPhone, iPad or iPod touch - Apple Support

  Get help if you cannot make or receive calls FaceTime - Apple Support

• Unable to connect to a Time Capsule - router Apple´s

  I bought a Time Capsule (Apple´s built-in wifi router and hard drive). My Vista laptop can connect to the network, but it can't get internet access or disk access network hard. I have a mix of different devices connected to the router without a problem, only the Vista PC gives me a hard time. The laptop is 18 months, HP with Vista and SP1.

  If I leave the network open (without encryption) PC Vista connects very well - both internet and hard drive. I tried to configure the network with different encryption, WPA2, WPA, WEP, etc.. The only thing that works is without encryption, which is obviously not a solution. If I wire the network connection, the Vista computer works also very well, but that no solution for me.

  In various Apple forum, this problem is known and discussed, but that no one could come up with a solution, so I hope that a post here can help me, so I can raise my last computer on my network.

  
  

  Hello

  Many Apple and Vista/Win7 routers have this problem. Two things you can try is updating the firmware of the
  the router and update your network (NETWORK and WiFi card) drivers on the computer.

  Good luck. Rob - bicycle - Mark Twain said it is good.

• Unable to connect to the TIME WAN and WIFI at the same time

  Hello

  Here's the situation - I'm setting up a mobile registration system that uses the remote wireless via a router dedicated to the sound system.

  I use the router on the PA system to remotely control my mixer and software only on the cable network.   The wireless network is used to communicate with the internet and send audio files between my workshop and the meeting place during a broadcast so that the engineer can have a production finished execution until the crowd clears, so the band can sell a CD of the show.   There is no use between the two networks and they need to run independently of the other.

  I'm having a problem where network connections will only be activated at any time.   I need to have the wired adapter and adapter wireless running at the same time.

  I'm good on the sound equipment, but know little about networks and computers.  I am open to suggestions or advice.   A procedure step by step on how to do that would be nice (as a network for Dummies!  (LOL).

  I am at a loss to know where to start, so any help would be appreciated.

  Thank you.

  Lequarius

  Hello

  
  Thanks for posting in the Microsoft Community.
  
  We have a dedicated team with advanced tools and permission to help with this issue. Then I suggest you to report the same query in TechNet forum.
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro
  
  Thank you.

• We are unable to connect at this time. Please check your internet connection and try again.

  I recently bought a SSD and needed an iso to install Windows with.

  I tried to run the window installer 8 to create the ISO, but every time that I run it and enter my product key, it says:
  We cannot provide at this time
  Please check your internet connection and try again.
  I tried restarting the computer, delete the temporary files, as an admin, creating a new user account, setting my DNS servers, restart my router and my dns to hot flashes.
  I did not have this problem a few days ago, but he had another problem involving incorrect data when you try to run the installer.

  Try to rename or delete the Web installation folder and try again.

  C:\Users\\AppData\Local\Microsoft\Web install

  See also:

  http://techingiteasy.WordPress.com/2013/02/14/how-to-obtain-64-bit-Installer-and-create-install-media-for-Windows-8/

• Updated to 10 MS today and my photoshop CS 6 requires reactivation. Cannot get Adobe by phone, online connection says unable to connect now, I have an authorizatiob code to make it work. Fequires online request code that I don't have an answer

  Updated to 10 MS today and my photoshop CS 6 requires the reactivation of use it. It automatically tries to get the activation code by going online, but it stops and says unable to connect at this time, "calling support '; but cannot get Adobe by phone and this phone says trail finally this product only is not supported by phone.  To start it requires an activation code and go online to get a response code requires a request for code I do not have. What is the next step? I just want to be back up and working. Thanks for any help.

  David

  Quickly find your serial number

• Unable to connect any user id of first time in content viewer Adobe (R25)

  Hello

  I use R25 Adobe content viewer. The problem is that I am unable to connect any user first time id. when I 2nd time with the same id, then do it successfully. Kindly suggest.

  Pub in DC
  

  It is a known issue with the content viewer Adobe v25. It is fixed with version v26, which is currently awaiting approval from Apple. If you have a subscription or company DPS Pro, you can create a custom Adobe viewer.

• EA6500 unable to connect to the router after Time Machine

  Just got an EA6500 - updated to the latest firmware available.

  I have attached 2 x WD NAS and 1 x WD through the USB port of the device.

  Each time after I finished running Time Machine on the MacBookPro (written to one of the WD NAS), I can no more connection to the router as neither the local IP, or the cisco connect cloud. The error message I get (loosely formulated) is: unable to connect to the router. Please ensure that the router is connected to the internet.

  At this point, all the devices connected to the router (wired and wireless) still can access Internet perfectly. Only the console of the router is therefore more accessible.

  Anyone else have the issue?

  Any ideas on how to solve it?

  Contact support for Cisco and the person advised me to do a factory reset (even if the router is new with no customization!). Regardless, it now works correctly. Cisco Cloud Connect works always before, during, and after a Time Machine.

  "When in doubt, try to turn the grid and the.

• Unable to connect to a Web site? used several times before. says the dns server is incorrect or does not exsist?

  Unable to connect to a Web site? used several times before. says the dns server is incorrect or does not exsist? help someone?

  If it is hosted by GoDaddy, it's maybe out of service. There is a DDoS (denial of Service) attack to GoDaddy for the moment.

  You could try again later and see if it returns.

• I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still re

  I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can we do?

  Moved to this discussion in the creative forum cloud download & install.

  R.O.B. Please see Sign in, activation or connection errors. CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information on how to resolve the error of connection between the computer and our activation server.

• Unable to connect to the server at this time!

  Hey guys,.

  We are experiencing a problem with our multifolio app. We continue to get this message when downloading folios: unable to connect to the server at this time.

  Now, normally we put this to a bad internet connection.

  This is not the case.

  We constantly download problems in this app. At the beginning it is seems to be very well; the blue indicator bar Scrolls merrily along until suddenly it stops and goes back initially, continues still for a bit and then, BOOM! Unable to connect to the server at this time!

  The funny thing is when I go to the Adobe Content Viewer that doesn't happen. Same files in the same place, but with a different application. It may take some time, but it does not stop and finally finished the job. I get the download.

  The name of the application is Reykjavik Shopping and City Guide.

  Any thoughts? This is a serious problem and could impact our business in a bad position.

  Thank you

  Yngvi

  Please contact support for assistance with this enterprise. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking at the Middle at the bottom of the page.

  Neil

• Unable to connect to the App store on iOS 4.2.1

  Hi guys!

  I decided to take my iPhone good ol' ' 3 G out of the darkness to use it as a backup phone in case of any situation, unhappy and unable to connect to the iTunes/App store after several tests. I checked my wifi connection and it worked well on Safari. Someone here has a tip on how to fix? Or has Apple really stop its connectivity on the older iOS app store - are

  After seeing your post, I booted up my 3G to test and noticed the same thing. I thought it might have something to do with Date & Time settings. I noticed that, even though 'Set automatically' performed, the phone thought that the current date was in September of last year. Since the App Store will not work if the date and time settings are incorrect and that the phone can't connect to the server to get the right time, I would say that is why you don't get on the App Store (assuming that you also see the anomaly of the moment).

  I have an iPod touch 2nd generation, which also iOS 4.2.1 and will test it tomorrow there.

• Unable to connect to the internet ERROR 678

  original title: Please help me because I get ERROR 678 frequently

  I use a broadband connection on my desktop pc with windows XP SP3, as I tried to connect through windows running phone 7 ultimate, but I was unable to connect to the internet, now even once, I plugged the cable broadband for desktop pc and now I get ERROR 678 , after several attempts to recall that I am able to connect through desktop pc. I have met it 2nd time to do the same procedure for the first time he resolved automatically, but now there's a problem. also contacted the service provider as their laptop to connect to internet with my account but I can't my pc... HELP ME PLEASE...

  Hi Aniketpawar,

  ·         What security software is installed on your computer?

  I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  You may receive error 678 or error 769 when you try to connect to the Internet or when you try to browse the Internet after you install Windows XP Service Pack 2

   http://support.Microsoft.com/kb/892889

  Let us know if that helps.

• The user profile Service has no logon (for the 2nd time)

  I have Windows Vista, and this is the 2nd time in a few months this product. The first time that I could remedy this by following this tutorial.

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  But I can't do it twice, because I already have a folder with a .bk to the end and the other without the .bak. So I can't rename the files, so neither solutions work. And I can't do a system restore because it screws my McAfree upward. Please can someone help me?

  Hello

  The .bk is only a backup on the 1st operation comes off so you can listen to.
  You can also use .bz (or something else) instead of .bk to this effort. The important
  part is to save the old profile before you rename the .bak.

  BTW, there is a good chance that McAfee is the first cause, or at least getting worse, this question
  to verify the message options.

  ----------------------------------------------------------------------------------------------------------------

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Unable to connect to Airport Extreme after updating iOS 10

  Hey guys.

  OK not sure if anyone else has this problem, but I can't connect to my Airport Extreme update IOS 10 my wife is.

  We all have two iPhone 6 and 64 gb & update at the same time.

  We have an ac 802.11 Airport extreme also an extreme dual band of airport & an express airport which none of us can connect to.

  We can connect to the Home Hub 6 provided by our service provider broadband with no problems but it is only in a part of the House that we are unable to connect to my office or at the back of the House.

  Tried resetting the network settings on the phone thought I might ask before having to try to reset back to factory settings base stations.

  Thank you

  FWIW, I upgraded my iPhone SE 5 and Pro iPad to iOS 10 as well, but knows me not any problems connecting to one of my base station AirPort to Wi - Fi.

  Or the other of your iPhones must all problems connecting to other networks in addition to the Home Hub Wi - Fi? In other words, are they only having problems connecting to your AirPort base station? If Yes, do you have someone nearby who also has an AirPort wireless network that you should check your iPhones with?

  In the meantime, let's take a look at the current configuration of your network. We know that you, at least, three airport base stations. What is the exact models of non - 802.11ac extreme and Express?

  These base stations are all linked back to the Home Hub with Ethernet they are all configured for a mobile network?