2nd video device HP Pavilion-23-a304a-All-in-One Desktop PC E9V70AA

Similar Questions

• External monitor to an hp pavilion 23-b010 all-in-one desktop?

  I just bought a hp pavilion 23-b010 all-in-one desktop computer... can I connect it to an external monitor? and if so, are there special requirements for the external monitor?

  Here are the specifications of your all-in-one HP Pavilion 23-b010 computer office. According to the specifications, this computer has no video output of any kind ports (DisplayPort, VGA, DVI, or HDMI). You will need to purchase and use a USB-to-video as the EVGA UV adapter more + UV39 or UV19 to connect an external monitor to your computer.

• The lid opening rear of the hp Pavilion 23 - f250 all-in-one desktop

  Hi TwoPointOh

  Thank you for let me know the step by step process the opening on the back of the NEW (2013) hp Pavilion 23-f250 Office all-in-one to add ram memory. There are a few online video, but not for 23-f250, is there one for a Jules Destrooper?

  Thank you

  Hello

  Try this Guide maintenance and upgrade HP.

  Removal of Modules of memory

  Before you start: Remove the VESA cover and back cover.

  Measures

  1. Carefully remove the shield EMI covering the memory - locations take care of is not to damage the battery on the motherboard.
  2. Then, pull gently on the fixing lever on each side of the SO-DIMM memory module.  The module will pop up in its socket.
  3. Remove the module from the plug.

  Replacement of Modules of memory

  Measures

  1. There is a small notch on one side of each SO-DIMM module that fits on a small tab on one side of each shot SO-DIMM.
  2. To replace a module of memory SO-DIMM, angle of the module at about 45 degrees, engaging the notch in its socket tab.
  3. Push the module in place until the levers of fixing snap into position above the sides of the module.
  4. Carefully align the top edge of the EMI Shield over the opening slot of memory on the shield of the motherboard - then press it down into place.

• HP Pavilion 23-a200a all-in-One desktop PC

  critical error is not going past this error

  tried to let him do a repair via windows repair work not to go in front of her and is not reding any our external dvd player usb

  If I can get the data off hd

  can someone help please

  Hello @RIMTECHMOB,

  I understand that your computer displays a critical error, and that you are not able to run a repair of the operating system Windows. What is the full error message exactly as it appears on your screen? You are able to start your computer in Mode safe?

  In the meantime, I recommend that you follow the steps described in this document on using Microsoft System Restore (Windows 8) when your computer is not able to start normally. If you are not able to restore or restore your operating system, please follow this resource on HP System Recovery troubleshooting (Windows 8).

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

  Concerning

• Power problem - computer from HP Pavilion 23-h055la all-in-one desktop touch

  I bought bought not from HP but private, a Ref model above. I'm not quite certain re model since there is no labels.

  However there was no power adapter so I tried with no HP 19, 5v adapter 7, 7 bis and 150 w. The small lamp above the power socket was on / but no sign of life in the machine.

  Any clue?

  In fact, I managed to get my hands on an adapter HP with the same features and now it works very well.

• With the help of a 2nd monitor with HP ENVY bow 27-k009 TouchSmart all-in-One desktop PC

  I would use a 2nd monitor with my HP all-in-one, but I can't figure out how to do this.  Our it guy says it can be done by using a VGA cord DMI but it does not work.  An another computer guy told me to get a USB cord with a graphics driver and technology at Best Buy told me that it is not possible to use a 2nd monitor with this all-in-one specific.  Please let me know if it is possible and how I would go to do.

  Here are the specifications of your HP ENVY tilted 27-k009 TouchSmart all-in - One desktop PC. Based on the specifications, this model, is a video output any. The HDMI port on the side is strictly an ENTRY;

  

  3 HDMI input

  To connect your computer to an external monitor, you will need to buy an adapter USB-to-video, as EVGA UV plus + UV39 or many other cards on the market.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Upgrade memory for HP Pavilion 23 - g040xt CTO all-in-One desktop

  When I ordered my

  HP Pavilion 23-g040xt CTO of all-in-One desktop PC I could only afford the version of 4 GB of Ram. Now, I want to upgrade the memory up to 16 GB. I have a few questions

  1. I noticed all this in a use SODIMM and I was wondering if I could buy any DDR3 SODIMM for this or if I have to buy a specific manufacturer?

  2. now, I have only 4 GB using 1 of the 2 memory slots. I'll be able to buy 2X8GB and use this location empty on my motherboard and run dual channel?

  3. How do the memory locations? Just pop the back of all in one PC?

  Thank you

  According to the specification, this model supports up to 16 GB (2 x 8 GB), as follows:

  Dual channel memory architecture
  Two DDR3 SODIMM Sockets (204 PIN)
  Supports the PC3-12800 (DDR3-1600)
  Supports 1 GB, 2 GB, 4 GB and 8 GB DDR3 SODIMM

  Any brand or model of RAM memory that meets the following specifications should work on your computer. If you have 4 GB in a housing, you will need to remove it to install both 8 GB DIMMs. Yes, you just need to pop on the back.

  There should be two or more screws on the back that need to be turned counterclockwise until you hear each "click" of 5-6 times. Then, take a lower corner and lift the corner. Repeat with the other bottom corner. Now, lift the... starting back down. You may also need to remove a cap on the memory locations to access.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP Pavilion - 27qe touch everything-i: HP Pavilion - 27qe touchscreen all-in-one PC Downgrade of Win10 of Win7 Pro 64 bit

  I ordered, from hp store-still in production, a HP Pavilion - 27qe touchscreen all-in-one.  There are 10 Windows.  I would come down to Win7 Pro 64-bit (I can buy a legal copy of win7 and do a clean install).  I understand that I would lose some features like the touch screen, but I really prefer Win7.  I'm looking for info on how to do this?  For example, where to find the proper drivers (determine which and where to download to), BIOS etc.  Drivers listed on hp for this computer are for Win10 only, there is no Win7 drivers listed.  Of course I'd first recovery disks Win10, where I always want to go to the Win10 or if Win7 is not working properly.

  Any info/help appreciated.  My wife and I share one our computer at home with Win7 on it.  Me, my wife and probably would be better to use Win7 we are used and as.

  Thank you...

  Thanks for the info WAWood.  I decided to nix the idea of decommissioning.  It would be too complicated, as you point out.  Have a good!

  I noticed that you have been very busy here.  Member for 2 months and almost 500 posts!  Thanks for you disseminate knowledge and activity here.

• HP ENVY bow 27-k119 TouchSmart all-in-One desktop PC

  Hello. I have

  HP ENVY tilted 27-k119 TouchSmart all-in-One desktop PC, after the upgrade to windows 10 I have no audio, I tried to download beat audio SUPPORT HP, without success. Can someone help me. Thank you

  Hello

  No support Windows 10 from his homepage. Please try the following driver for Windows 8.1:

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64642.exe

  Kind regards.

• Office all-in-one HP 20-e019: HP 20-e019 all-in - One Desktop RAM upgrade?

  I bought the HP 20-e019 of all-in-one desktop computers, but they are running slow with 4 GB of RAM that came with it. I bought RAM by card, but cannot find the expansion slot... is this really scalable PC? Or am I totally missing the slot? Thank you.

  Hello

  4 GB is the maximum number on your machine, and it has only ONE slot. You cannot add more:

  Memory upgrade information

  • Memory channel architecture

• Windows 8 or 8.1 update? HP ENVY TouchSmart all-in - One desktop PC 23-d260qd

  I just bought the HP ENVY TouchSmart all-in-One desktop PC 23-d260qd and it happens today. I wonder if it is better to upgrade to Windows 8.1 instead of windows 8. It seems that several people had problems with the upgrade. I just got my computer today and have yet to open the box, but I wanted to know what OS is better and how I would go about updating Windows 8.1 must be optimal. My computer specs are below:

  • 64-bit Windows 8
  • • 3rd generation Intel® Core™ i7 - 3770S processor [3.1 GHz, 8 MB of shared cache]
  • • 1 GB NVIDIA GeForce GT610M [DX 11, 3. 0a MXM]
  • • 12GB DDR3 1600 MHz SODIMM [DIMM 2]
  • • 2 TB 7200 RPM SATA Hard Drive
  • • Microsoft Office Trial

  Thanks in advance for your suggestions and help!

  Create a recovery disk set before even considering the upgrade.

  If you are not yet accustomed to Windows 8, then give yourself a little time to get familiar with before committing to an upgrade to Windows 8.1.

  I prefer the upgrade of Windows 8.1, in particular the return of the Start button, it is not the same as the Start button was before Windows 8.

  Important factors for Windows 8.1 are available on the web support download portal for your PC.

• HP ENVY TouchSmart All 23-d044: 23-d044 WANT to HP TouchSmart all-in - One Desktop PC wireless

  This PC wireless adapter does not work with the band of 5 Ghz 802.11?

  Hello @luticrist,

  I understand that you are curious to know if your HP ENVY TouchSmart all-in-One desktop PC 23-d044 can handle the 5 Ghz bands. According to the HP ENVY 23 - d044 TouchSmart all-in-One Desktop PC product specifications page your computer supports the following communication standards: 802.11b/g/n. With an antenna that works only on a single-band 2.4 GHz. If 'NO' your wireless adapter does not work on the 5 Ghz range.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• How can I get a report by fax on Fax output hp jet pro L7580 all-in-one desktop?

  How can I get a report by fax on Fax output hp jet pro L7580 all-in-one desktop?

  You click on the "Setup" button on the front panel of the printer, highlight "Print report", you should have an option to print a newspaper 'Fax' in this menu.

• ENVY Beats All - In - One Desktop: how to connect a second monitor/TV to HP ENVY Beats all-in-One

  Hi, I was wondering if anyone could tell me if it is even possible to plug a second monitor HP ENVY Beats all-in-one desktop PC, because I'm trying to connect my TV as a second monitor via HDMI, and I tried everything I could, but came empty-handed?

  Hello

  What is the product/model of your AIO machine? I have a lot of cases, you cannot use HDMI port to connect to a TV, because it's the HDMI IN port. You need USB - HDMI converter/adapter to connect to a TV (or monitor).

  Kind regards.

• HP Compaq Pro 6300 all-in - One desktop PC Touch Panel does not

  I have a new HP Compaq 6300 Pro all-in-one desktop PC. It came with Windows 7 32 bit preinstalled, but I wanted to Win 7 64 bit so I had to do a clean install and therefore lost all my drivers.

  I was able to get most of the drivers I need HP driver download page for my specific model, but the touch screen under the screen no longer works. It certainly worked until I changed the operating system. To clarify, this is a sign of close contact under the screen that allows you to mute sound, change the volume or change the brightness. The control panel items are invisible until you touch it, how the options - this feature still works. They light up, but do nothing for the levels of noise or the brightness.

  I don't know much about the drivers, but this seems to be a driver for me problem. Does anyone have any ideas on how I could get the touch screen works again, because it is an interesting possibility, I'd like to be able to use.

  Thanks in advance.

  Hey, no one has responded to my request, but just Serendipity led me to the solution, so I'll post it here in case someone else has the same problem.

  In his search for information about installing additional RAM memory, I found myself in the correct name of the touch screen, I had a problem with: capacitive controls, aka buttons capsense. Once I got the correct term was a few seconds before I got the solution, see:

  HP all-in-one control panel Button for Windows Support

  According to the HP support page, the little softPaq provided "patches a question wherein Capsense buttons (mute, Mic, theft and theft down) of your computer do not work after manually installing a version of Windows", reinsert the necessary registry key.

  The softPaq (sp60481.exe) worked well for Windows 7 64 bit on my HP Compaq Pro 6300 all-in-one and I am very happy to have this cool touchscreen works again.