The lid opening rear of the hp Pavilion 23 - f250 all-in-one desktop

Similar Questions

• External monitor to an hp pavilion 23-b010 all-in-one desktop?

  I just bought a hp pavilion 23-b010 all-in-one desktop computer... can I connect it to an external monitor? and if so, are there special requirements for the external monitor?

  Here are the specifications of your all-in-one HP Pavilion 23-b010 computer office. According to the specifications, this computer has no video output of any kind ports (DisplayPort, VGA, DVI, or HDMI). You will need to purchase and use a USB-to-video as the EVGA UV adapter more + UV39 or UV19 to connect an external monitor to your computer.

• 2nd video device HP Pavilion-23-a304a-All-in-One Desktop PC E9V70AA

  Hello world

  I'm new to the forum. I just bought a HP Pavilion all-in-one 23-a304a Office P E9V70AA.

  One thing that I forgot to check was I can plug in a laptop and use the HP as the DISPLAY monitor, sometimes I work from home and using the larger screen would be great, but I've noticed that there are no HDMI or other video ports on the desktop.

  The thoughts and thanks in advance.

  Rob

  Hello

  It has not designed this way, you can not use it as a stand-alone monitor for your laptop.

  Kind regards.

• HP Pavilion 23-a200a all-in-One desktop PC

  critical error is not going past this error

  tried to let him do a repair via windows repair work not to go in front of her and is not reding any our external dvd player usb

  If I can get the data off hd

  can someone help please

  Hello @RIMTECHMOB,

  I understand that your computer displays a critical error, and that you are not able to run a repair of the operating system Windows. What is the full error message exactly as it appears on your screen? You are able to start your computer in Mode safe?

  In the meantime, I recommend that you follow the steps described in this document on using Microsoft System Restore (Windows 8) when your computer is not able to start normally. If you are not able to restore or restore your operating system, please follow this resource on HP System Recovery troubleshooting (Windows 8).

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

  Concerning

• Power problem - computer from HP Pavilion 23-h055la all-in-one desktop touch

  I bought bought not from HP but private, a Ref model above. I'm not quite certain re model since there is no labels.

  However there was no power adapter so I tried with no HP 19, 5v adapter 7, 7 bis and 150 w. The small lamp above the power socket was on / but no sign of life in the machine.

  Any clue?

  In fact, I managed to get my hands on an adapter HP with the same features and now it works very well.

• With the help of a 2nd monitor with HP ENVY bow 27-k009 TouchSmart all-in-One desktop PC

  I would use a 2nd monitor with my HP all-in-one, but I can't figure out how to do this.  Our it guy says it can be done by using a VGA cord DMI but it does not work.  An another computer guy told me to get a USB cord with a graphics driver and technology at Best Buy told me that it is not possible to use a 2nd monitor with this all-in-one specific.  Please let me know if it is possible and how I would go to do.

  Here are the specifications of your HP ENVY tilted 27-k009 TouchSmart all-in - One desktop PC. Based on the specifications, this model, is a video output any. The HDMI port on the side is strictly an ENTRY;

  

  3 HDMI input

  To connect your computer to an external monitor, you will need to buy an adapter USB-to-video, as EVGA UV plus + UV39 or many other cards on the market.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Is the Officejet 7612 A3 e-all-in-one compatible with windows 10

  Hi, I am looking to buy the Officejet 7612 A3 e-all-in-one and I was wondering if it is compatible with Windows 10. Thanks for your help

  Yes

• Where is the USB port on the printer 4500 hp envy all-in-one

  Where is the USB port on the printer 4500 hp envy all-in-one

  So the question for your answer:

  Compatible products for: HP bt500 Bluetooth USB 2.0 Wireless Adapter (Q6273A)

  Color Multifunction and all-in-one HP Officejet Pro 8500 all-in - One Printer series - A909 HP Officejet Pro L7500 all-in - One Printer series Mobile inkjet printers HP Officejet H470 Mobile Printer series Specialty Inkjet Photo HP Photosmart A520 printer range Printer HP Photosmart A620 Printer HP Photosmart A630 Series of HP Photosmart A820 Home Photo Center Printer HP Photosmart B8550

  And now, if you want to get help with your problem, you are cordially invited to use the assistance offered, otherwise I wish you all luck since your iPhone printing...

  For questions print via Bluetooth, you can connect with Apple, maybe you will be better as their response

  All the best...

• How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  Hi baldwinj,

  Follow the steps outlined in the document below to install the OS driver in for this printer in Win 7 64 bit.

  HP LaserJet Color LaserJet and products of LaserJet AiO/MFP - install the driver included in the operating system Windows 7 (OS)

  Download drivers and software

• How to shut up or disable the phone ringing on my all in one single c410a?

  How to shut up or disable the phone ringing on my all in one single c410a? Already there is a phone in the room. How can I disable it?

  Hello

  On the printer Panel, click the Setup program () button.

  Press the arrow down until Adjustment of Fax base appears on the screen, and then click OK.

  Press the arrow down until the Volume of sounds Fax is displayed on the screen, and then click OK.

  Adjust the Volume as Off, and then click OK to apply the changes.

  Kind regards

  Shlomi

• Upgrade memory for HP Pavilion 23 - g040xt CTO all-in-One desktop

  When I ordered my

  HP Pavilion 23-g040xt CTO of all-in-One desktop PC I could only afford the version of 4 GB of Ram. Now, I want to upgrade the memory up to 16 GB. I have a few questions

  1. I noticed all this in a use SODIMM and I was wondering if I could buy any DDR3 SODIMM for this or if I have to buy a specific manufacturer?

  2. now, I have only 4 GB using 1 of the 2 memory slots. I'll be able to buy 2X8GB and use this location empty on my motherboard and run dual channel?

  3. How do the memory locations? Just pop the back of all in one PC?

  Thank you

  According to the specification, this model supports up to 16 GB (2 x 8 GB), as follows:

  Dual channel memory architecture
  Two DDR3 SODIMM Sockets (204 PIN)
  Supports the PC3-12800 (DDR3-1600)
  Supports 1 GB, 2 GB, 4 GB and 8 GB DDR3 SODIMM

  Any brand or model of RAM memory that meets the following specifications should work on your computer. If you have 4 GB in a housing, you will need to remove it to install both 8 GB DIMMs. Yes, you just need to pop on the back.

  There should be two or more screws on the back that need to be turned counterclockwise until you hear each "click" of 5-6 times. Then, take a lower corner and lift the corner. Repeat with the other bottom corner. Now, lift the... starting back down. You may also need to remove a cap on the memory locations to access.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP Pavilion - 27qe touch everything-i: HP Pavilion - 27qe touchscreen all-in-one PC Downgrade of Win10 of Win7 Pro 64 bit

  I ordered, from hp store-still in production, a HP Pavilion - 27qe touchscreen all-in-one.  There are 10 Windows.  I would come down to Win7 Pro 64-bit (I can buy a legal copy of win7 and do a clean install).  I understand that I would lose some features like the touch screen, but I really prefer Win7.  I'm looking for info on how to do this?  For example, where to find the proper drivers (determine which and where to download to), BIOS etc.  Drivers listed on hp for this computer are for Win10 only, there is no Win7 drivers listed.  Of course I'd first recovery disks Win10, where I always want to go to the Win10 or if Win7 is not working properly.

  Any info/help appreciated.  My wife and I share one our computer at home with Win7 on it.  Me, my wife and probably would be better to use Win7 we are used and as.

  Thank you...

  Thanks for the info WAWood.  I decided to nix the idea of decommissioning.  It would be too complicated, as you point out.  Have a good!

  I noticed that you have been very busy here.  Member for 2 months and almost 500 posts!  Thanks for you disseminate knowledge and activity here.

• Upgrading the graphics card on an all-in-One

  Hello

  I was wondering if it is possible to update the graphics card on my PAvilion all-in - One 200-5200t? If Yes, how can I know what is the best graphic card compatible with my computer?

  WalidB, welcome to the forum.

  The motherboard has the following video slot:

  Mobile PCI Express Module (MXM) decision-making.

• Installation of the HP Officejet Pro L7780 all-in-One

  HP Officejet Pro L7780 all-in-One

  Windows 7 64 bit

  Hi, I have downloaded software from HP in order to install my printer. For some reason any installation fails and I would really like to help. Step by step of my installation procedure->

  I run the program "to add a series of all-in-one Officejet Pro unit

  I chose the wireless connection

  The program runs and find a printer 'Officejet Pro L7700' I select it and click Next

  He runs the installation for 5-10 seconds, and then it says that the printer was not complete.

  I ran the install several times (also after restart the printer and the computer) moved always

  The connection of printers is configured properly, to the best of my knowledge.

  It also print documents computer wireless. My problem is that I can't scan a document to your computer. When I choose the scan of the computer, it tells me that there is no scanning settings.

  I have no idea what to do...

  Hi RazorkillerC,

  You can scan from the HP software successfully?

  1. open the Solution Center, and then select settings

  2. select scan settings

  3. delete the shortcuts on the right side

  4. click on the device to update, and then close the scan window

  5. open again the scan window

  6. add shortcuts on the left side to the right side

  7. click on the device to update

  8. try scan from the front panel of the printer

  

• HP C7280 All in One printer: HP Scan of the error using HP C7280 all-in-one printer

  I was scanning documents successfully until recently.  I use a Mac with OS X 10.7.5 and receive the following error message when you use HP Scan.

  Cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.

  -Restart the program.

  -Close all programs that might be using the device.

  -Restart the computer.

  I tried to download several drivers without success.

  Any help would be greatly appreciated.

  Hello @kellycc,

  Welcome to the Forums of HP Support! I see when you try to scan with your HP Photosmart C7280 with your Mac running the 10.7 operating system, you get an error "cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.'.

  Complete the following steps:

  Scrub / uninstall

  • Open the Applications folder > folder HP or Hewlett Packard > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers. Hold down the command, Option , and command, while now the three buttons.
  • Click on Uninstall.

  Reset the printing system

  1. click on the Apple icon ( ), then click on System Preferences.

  2. in the hardware section, click Print & Fax/scanning. The Print & Fax/scanning dialog box opens.

  3. make a right click (or Ctrl + click) in the left panel and then click on reset printing system...

  4. click on OK to confirm the reset.

  5 type the name and the correct password.

  6. click OK to reset the printing system. The Print & Fax dialog box shows any selected printer

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol...

  Repair disk permissions

  1. on the Dock, click Applications, then utilities.

  2. double-click click disk utility.

  3. highlight your hard drive / partition on the left (by default this is "Macintosh HD").

  4. click on the button to repair disk permissions at the bottom of the window.

  5. once the repair is complete, restart the computer.

  Restart the printer. Now, you will need to install the printer driver using the Apple updates. Click on the link below and follow the instructions on the screen:

  Installation of your printer driver HP and software for Mac OS X

  I hope this helps, please let me know the result!

  Thank you