3 15 Flex - lag entered WIn 10
I upgraded my Flex 3 to 10 Windows and everything seems to work, but I'm extremely annoying "freezes" with entry. For example, if I move the mouse (touchpad or mouse USB separated) permanently, it will freeze for a moment once every few seconds. The same thing happens with the keyboard.
This happens at the lock screen or connect immediately after a reboot, it starts when I connect.
This first happened after doing a Windows 10 of 8.1 and then upgrade again arrived after doing a clean install of Win10.
If anyone has seen anything like this before?
Tapping helped, I guess, because I was able to find the source of the problem.
The source of the problem is FMAPP.exe, which is part of the Realtek HD Audio Manager. I can't understand what FMAPP did, however, so I just renamed the file, so it cannot be run, and so good. Realtek won't even complain about it being missing.
Tags: Lenovo Notebooks
Similar Questions
-
Satellite NB10t-A-101 - to use the dual OS - Windows + Ubuntu
Hello
I just bought a new laptop, whose type is indicated in the title. I want to in stall double OS on my machine, win 8 pre-installed and Ubuntu as well.
I followed the steps in the installation of Ubuntu under UEFI system, and everything is going well except the last step.
On a Ubuntu forum, I learned to access its UEFI setting interface, find the boot priority option and set Ubuntu as the first boot option, so that I can enter the Ubuntu system.I could change the priority of network/USB/HDD, but I couldn't change the priorities of the bootload of both files.
I'm sure that I have properly installed Ubuntu, but the only thing that can make my laptop is just enter Win 8 as usual and I'm not able to enter in Ubuntu.Just remember: I'm looking for a way to change the boot priority of the file bootload system, not the hardware boot priority.
Anyone know how to fix this?
Thank you very much!
T.
Hello
Check this box
Install Ubuntu 14.04 alongside Windows 8.1 in 10 easy steps
http://www.everydaylinuxuser.com/201...e-Windows.htmlAlso useful YouTube clip here:
https://www.YouTube.com/watch?v=eW07uMyJsZUYour comments would be appreciated
-
Aggregation of links and VLAN Trunking
I configured 2 switches with aggregates of connection between them. Access ports are part of VLAN 10, but no longer communicate through the NEWLY created GAL. LAG only pass a single VLAN or is there something that I am missing in the LAG config?
After creating the LAG you must then configure the LAG entering the port-channel interface and put to general/Trunk mode. Updated general/trunk mode allows multiple VLANs on the connection.
Example:
Console (config) # interface port-channel 1
mode console # switchport general
Console # switchport General allowed vlan add 2,3,4,5 tag
-
Hi all
I was wondering if anyone has a guide step by step (with pictures) on how to change the boot sequence (I'm not interested by a particular brand of PC or a particular Windows).
Thanks in advance :)
Adam
There are a few different ways to access a page of options boot menu at startup
Bios legacy would use the delete key
UEFI BIOS would use F8
Each you could enter the bios and select the or change the first device to boot cd / dvd drive is usually first "inline"
Some uefi bios and or install uefi, you may enter win - 10 or 8 - 8.1 and turn off the quick start first in = power options change what the button of power before you could even get into the bios because of the characteristics of secure of the two of them start.
-
Hello
I need a complex query to retrieve the lag entered in a specific format.
I have following three tables.
TSHT_SHIFT_SCHEDULE
SCHEDULE_ID
From_Date
To_date
SECTION_ID
1
21/09/2011
30/11/2011
16
2
21/09/2011
20/03/2012
21
TSHT_SHIFT_SCHEDULE_DETAILS
SCHEDULE_ID
DAY_ID
SHIFT_ID
EMPLOYEE_ID
1
1
0
61
1
1
1
60
1
1
2
58
1
1
3
66
1
2
0
58
1
2
1
66
1
2
2
60
1
2
3
61
1
3
1
61
1
3
2
60
1
3
2
66
1
3
3
58
1
4
1
58
1
4
2
60
1
4
2
61
1
4
3
66
1
5
1
66
1
5
2
58
1
5
2
60
1
5
3
61
1
6
0
60
1
6
1
61
1
6
2
66
1
6
3
58
1
7
0
66
1
7
1
58
1
7
2
61
1
7
3
60
2
1
0
98
2
1
1
93
2
1
2
100
2
1
3
92
2
2
0
100
2
2
1
92
2
2
2
98
2
2
3
93
2
3
1
93
2
3
2
92
2
3
2
98
2
3
3
100
2
4
1
100
2
4
2
92
2
4
2
93
2
4
3
98
2
5
1
98
2
5
2
92
2
5
2
93
2
5
3
100
2
6
0
93
2
6
1
100
2
6
2
92
2
6
3
98
2
7
0
92
2
7
1
98
2
7
2
100
2
7
3
93
EMPLOYEE_MASTER
EMPLOYEE_ID
BADGE_NO
58
M353
60
M355
61
M356
66
M361
The screen for entering data in my program looks like
UPDATE 12-8
MAJ 8-4
MAJ 4-12
OFF
SUN
M355
M353
M361
M356
LUN
M361
M355
M356
M353
MAR
M356
M361, M355
M353
FRI
M353
M356 M355
M361
THUR
M361
M353, M355
M356
FRI
M356
M361
M353
M355
SAM
M353
M356
M355
M361
Day ID 1,2,3,4,5,6,7 are Sun, Mon, Mar, sea, game, sat, Sam respectively
Shift_ids 0,1,2,3 are off, Maj 1st, 2nd quarter, 3rd quarter respectively.
I want to query the TSHT_SHIFT_SCHEDULE_DETAILS table to retrieve data in the format above
The set must be as follows
Day_id
first
second
third
off
1
M355
M353
M361
M356
2
M361
M355
M356
M353
3
M356
M361, M355
M353
4
M353
M356 M355
M361
5
M361
M353, M355
M356
6
M356
M361
M353
M355
7
M353
M356
M355
M361
Is this possible?
Help, please...
2730134 wrote:
Hi Chris,
Please note that TUESDAY in shift2(8-4) there are two employees M361, M355
But with the request that you have posted, I get only M355.
Is it possible to recover several employees concatenated with comma?
Thank you
OK, did not notice that:
Select
DAY_ID
, rtrim (xmlagg (xmlelement (e, decode (SHIFT_ID, 1, BADGE_NO |)))) (') BADGE_NO).extract('//text order () '), ',') 'first.
, rtrim (xmlagg (xmlelement (e, decode (SHIFT_ID, 2, BADGE_NO |)))) (') BADGE_NO).extract('//text order () '), ',') 'second '.
, rtrim (xmlagg (xmlelement (e, decode (SHIFT_ID, 3, BADGE_NO |)))) (') BADGE_NO).extract('//text order () '), ',') 'third '.
, rtrim (xmlagg (xmlelement (e, decode (SHIFT_ID, 0, BADGE_NO |)))) (') BADGE_NO).extract('//text order () '), ',') 'off '.
of TSHT_SHIFT_SCHEDULE_DETAILS d
E EMPLOYEE_MASTER
where
e.EMPLOYEE_ID = d.EMPLOYEE_ID
and SCHEDULE_ID = 1
Group
SCHEDULE_ID
DAY_ID
order of day_id
DAY_ID, first, secondly, thirdly, off
'1', 'M355', 'M353', 'M361', 'M356.
'2', 'M361', 'M355', 'M356', 'M353.
"3', 'M356", "M355, M361,"M353. "
"4', 'M353", "M355, M356"M361. "
"5', 'M361", "M353, M355"M356. "
'6', 'M356', 'M361', 'M353', 'M355.
'7', 'M353', 'M356', 'M355', 'M361.
-
poor performance with lumetri Panel open
whenever I load a glance in the Panel creative cc2015 first 9.0.2 lag
win 10
16 g of RAM
3 SSD
I7 prossesor
Thank you
Hi jim,.
It is a known problem in Premiere Pro CC 2015 and has been reported that the respective team and hope will be corrected in future releases.
So, for now, to minimize the creative Panel and then try reading.
Vinay
-
LOOK for iOS, 'HelloWorld' fails to compile
Flash CS 5.5 v11.5.1.349
Windows 7 Professional SP 1
I get the compile error when you post AIR for iOS (Flash Cs 5.5). It does not, what is wrong, said simply that he was unable to compile the files.
"Error creating files.
Failed to compile... »The application is simple - is the example Hello World in the help section, but it still does not work. (Of course, I have all the necessary certificates created.) What is even more interesting, the same fla without changing file compiles well on Flash CS5.5 my colleague, even if (11.5.1.349) versions are identical.
The only time I get that error is when a file is in use (or Windows thinks it's) because he has started or selected in Windows Explorer, then you will fail to compile the SWF itself. Otherwise, do not hit browse and specifically defining the path to export product also the error for me.
Is generated all SWF? If so, it has a size (> 0Ko)?
One thing you should definitely do more than overlay latest Adobe Flash CS5.5 AIR. This will ensure that you have all the latest patches and updates to AIR for iOS. This may solve your problem.
Download the SDK here:
http://www.Adobe.com/devnet/air/air-SDK-download.html
Instructions on layering (disregard the version number difference, simply use the correct number of AIR, you're coming to overlap instead, from 13 to 16):
http://helpx.Adobe.com/x-productkb/multi/overlay-air-SDK-Flash-Professional.html
I also recommend to download and update Flash CS5.5 to have the latest version of Flash Player. This is so you can target and test using the version 16 (11.3 flash drive). Here is the download page for the Flash Player the latest debuggers, playerglobal.swc, etc.. :
http://www.Adobe.com/support/flashplayer/downloads.html
There is not a lot of information out there on how to install it in Flash CS5.5 but I'll give you the general jist:
-Close Flash Pro
-Install 2 browser plugins (activeX and plugin according to the debuggers)
-Download the "projector content Debugger" and crush the FlashPlayerDebugger.exe in this default path: C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Players\Debug
-Download the "projector" and crush the FlashPlayer.exe in this default path: C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Players\Release
-Download the playerglobal.swc (make sure that it has named exactly that), then navigate to the default path: C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Common\Configuration\ActionScript 3.0
-Create a folder in this path called "FP11.3" and place the playerglobal.swc in there.
-Navigate to the default folder C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Common\Configuration\Players
-Duplicate the last FlashPlayer1x_x.xml file and name it FlashPlayer11_3.xml.
-Change the file. Change the lines accordingly, the parts in bold are the changes:
Flash Player 11.3 Now you can restart flash and your target publication, you should see Flash Player 11.3 as target.
To check 11.3 is installed correctly open a new AS3 document and paste this code and then run it using the DEBUGGER.
Do not simply press CTRL +, it is just a player. Use CTRL + SHIFT + ENTER. You should now see the version followed 11.
Here is the script code of the simple framework:
import flash.system.Capabilities;
trace (Capabilities.version);
For using the debugger (CTRL + SHIFT + ENTER) I see: WIN 11,3,300,257
For me using just came out (CTRL + ENTER): WIN 10,2,153,2
-
Hello
I want to create a window where we have an opportunity to introduce a block of text (several lines...). More close to you to the component of the problem is 'EditText', but when new line (press ENTER) to confirm and close the window. I would like to ask if there is a component textarea because I found it helps in ExtendScript Toolkit. Join the gross example of windows, I have in mind with the 'EditText ': component
var dialog = new window ("dialog", "alert box Builder', [100,100,580,345]");
dialog.farbaVizitky = dialog.add ('panel', [45,50,435,230], 'Zadaj address');
dialog.farbaVizitky.cervena = dialog.farbaVizitky.add ('edittext', [15,15,95,35], "prve'");
dialog.farbaVizitky.modra = dialog.farbaVizitky.add ('edittext', [15,50,95,70], 'Druhé');
dialog.farbaVizitky.cervena.value = true;
dialog.farbaVizitky.buildBtn = dialog.farbaVizitky.add ('button', [105,80,185,105],
('OK', {name: 'ok'});
Show ();Thank you
You must set the multiline to true edittext control property.
dialog.farbaVizitky.cervena = dialog.farbaVizitky.add ('edittext', [15,15,95,55], "prve', {multiline: true}");
Even in this case, you will need the meta keys xbytor listed to create the new row in the control. I'm not sure that defalutElement set to null will help. Even with the edittext control is set to multiline and no set of defaultElement, ctrl - enter (win) is required to create the new line
-
Hello
I'm trying to recover data from my database as an object I created using JDBC. However, I get the following error:
ArgumentError: Elements must support IManaged. For more information, see [Managed]: subject: "Profile1".
to mx.data::ConcreteDataService / http://www.adobe.com/2006/flex/mx/internal: normalize () [C:\depot\flex\branches\enterprise_ bridgeman\frameworks\mx\data\ConcreteDataService.as:2595 ]
to mx.data::DataList / http://www.adobe.com/2006/flex/mx/internal:processSequence () [C:\depot\flex\branches\enter prise_bridgeman\frameworks\mx\data\DataList.as:1597 ]
to mx.data::DataList / http://www.adobe.com/2006/flex/mx/internal:processSequenceResult () [C:\depot\flex\branches \enterprise_bridgeman\frameworks\mx\data\DataList.as:1788 ]
to DataListRequestResponder / result ([C:\depot\flex\branches\enterprise_bridgeman\frameworks\ mx\data\ConcreteDataService.as:5857])
at mx.rpc::AsyncRequest/acknowledge() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\AsyncR equest.as:74]
to NetConnectionMessageResponder / resultHandler ([E:\dev\3.0.x\frameworks\projects\rpc\src\mx \messaging\channels\NetConnectionChannel.as:469])
at mx.messaging::MessageResponder/result() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\messa ging\MessageResponder.as:199]
Thank youThis problem arises if you do not have the correspondence as a file for the java file you are trying to access.
-
TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why is - this seems to happen after each automatic update? Cant we get 'option' to use the TAB key to navigate through the lines of address "write"?
TAB through the fields that exist. It is the function of the TAB.
Otherwise you could never use TAB to go out in a field for example: subject. It would create an indefinate number of fields and are unable to function as a TAB key.
TAB does not back to THE fields,
New crests to THE fields or donkey typing/selection enter/return address, you can use the selection of mouse click. -
Satellite L50 - B - 1 M 1 - enter legacy Bios from 8.1 to win
I said, I found these instructions on the Internet into the legacy of the bios under windows 8.1 (on Youtube):
-From the right sidebar, press 'settings' - choose 'Change PC settings', - "update and recovery" recovery-advanced startup
-Restart
On restart press:
-"Use a device."
"EFI USB device..."
The following message appears:
There is no usb boot option in System. Please select another boot option in the Boot Manager menu.
-Press ENTER: Start menu appears.
-Choose Enter Setup: you enter the BIOS legacy!
End.
Unfortunately for me it is that you restart Windows 8.1
Could you give me a hand? Thank you
I wonder what you want to do exactly.
You want to access the BIOS?If so, you must press the F2 key after turning on the laptop.
The "F2" should be pressed several times to ensure that it was properly registered.Note: in the case where the laptop is not closed completely, please check this work around:
Perform a complete shutdown in Windows 8 / Win 8.1
http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm -
Flex 2 15 is no boot from usb stick w Win 7 image
I recently bought a Flex 2 15 and want to install Win 7. I created a bootable Windows 7 USB drive with the Microsoft tool and it works very well. The problem is, no matter what I change in the Bios or Boot manager, the laptop does not boot from usb. All I get is the instalation of Win 8.1 normal.
Anyone have any idea where the problem would be? Much appreciated!
Problem found. Supposed to UEFI to legacy
-
Lately, we updates Microsoft has introduced some lag in my system. I did a restore of last week, the 10th and it was fixed, and the last round of updates automatic introduced the problem again. Basically, here's the question: when I hit win - L to lock the machine, I get a good 10-20 second delay before it crashes, even with nothing running. Same with ctrl-alt-delete, or when I alt - tab to go a game of running a browser open. Now I realize that some of them are more intensive applications in resources, but I could do all these things before the updates almost instantly. I don't know what are those who have caused the it. Has anyone else seen elsewhere?
For the record, I use Windows 7 Enterprise 64-bit on a Core2Duo built home 3 GHz with 8gigs of ram box. GeForce 8800 GTX w / 768 MB of ram at 1600 x 1200 on the screen. So go to a window of the Explorer browser should not really be a problem.
It is a new installation of 64-bit, and Security Essentials is the only anti - anything produced, I had about it. In fact, to my embarrassment, I fixed the problem shortly after the announcement of my question. I did a full system scan, it finds a couple of trojan files (probably my uh...) "inprivate browsing"). " After their withdrawal, I once more lock the system instantly, immediately pull the Task Manager and change fast application.
Thanks for the tips. I would normally uninstall updates one at a time, but I was looking forward to kind of and thought that I would use a shotgun instead of a scalpel.
-
win xp install
Im trying to install a new install of win xp on a dell insp 700 m. all is well until you are ready to hit enter to select where to load windows. the keyboard freezes and crashes. It worked early, when I hit enter to launch the cd? any ideas? TX martyThank you! I tried what you mentioned, nothing has worked... I plugged a usb keyboard and it works, so I'm starting to believe it could be a motherboard problem. I finally got windows xp pro installed, no conflicts in Device Manager, all the drivers are installed and now running smooth. I removed the keyboard, and re-set, all connections look good, but still not good. the synaptics keyboard works fine and both rt & lft click the buttons. I pulled the ram to inspect it, it's the right speed, ddr2700, and after running for an hour, it was cold to the touch! I'll try to get a new keyboard and replace it, their pretty good work, if still not good it becomes pieces on ebay... lol tx again... Marty
-
Cannot enter BIOS on Win 7 HPE with American Megatrends BIOS
Although others have asked how to access the BIOS Setup interface, the answers have not solve my problem. so I write another similar question.
According to the subject line, I can't access the BIOS Setup interface during startup. My system runs Windows 7 HPE. The equipment includes an elite group of ECS motherboard that came with BIOS of American Megatrend chip version 4.6.5 and is dated 05/03/2012. I have never flashed or otherwise updating of the BIOS chip, but I could bring up the graphical user interface and change the options. I did quite recently in fact.
When I power fail system and/or entering the cycle of rebooting from the button start, the system stops and then begins to start and displays the start of American Megatrends screen. Press DEL repeatedly has no impact on the continuation of start-up. He proceeds as if the keyboard were not active and the system did not, therefore, the interruption of the keyboard... Because the splash screen also mentions F2 and F7, I tried these interruptions as well, nothing helps. The boot process has continued.
I searched the web until my fingers are simple bumps and can't find anything really useful. I read and reread mother ECS card manual without finding anything. I found a FAQ on the web page of American Megatrends, which addressed problems to access the BIOS with Win 8, which suggests that the change of power options would be effective. However, these referenced power options do not exist in my win 7 system HPE. Yes, Power Options are available from the Control Panel, but the individual options are not the same to win 8.
FWIW, I pulled all the hard disks internal power cables to see if I could access the BIOS interface. I was able to do so; However, without BONES, the keyboard is not active so no keyboard interrupts can be issued.
I would be grateful for any advice on how to influence of post-processing to slow down and make sure that any issue the keyboard interrupt is seen and followed.
Hello
Thank you for visiting Microsoft Community and we provide a detailed description of the issue.
By the description, I understand that the problem with you are not able to enter the BIOS American Megatrends BIOS setup.
I can understand the inconvenience that you have experienced and will try my best to help you.
In order to get more information about this, I suggest to visit the link below and check if that helps.
http://***.com/products/BIOS-UEFI-firmware/
Also, I suggest you to update the BIOS and check if that helps. Please visit the link below and check if that helps.
BIOS: Frequently asked questions
http://Windows.Microsoft.com/en-in/Windows/BIOS-FAQ#1TC=Windows-7
Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
I hope this information is useful.
Please let us know if you need more help, we will be happy to help you.
Thank you.
Maybe you are looking for
-
where are my Mozilla Firefox bookmarks stored in my old iMac g4?
I have a new Mac, an iMac 21.5 inck 10.6.6 and they transferred all the data from my old g4 iMac in one messy folder. Now I can't find my favorites from my old Firefox, is - can anyone plz HELP? Thank you
-
Cannot install updates error code ox652
my installation failure code is 0 x 652 help?
-
can I access my history of windows live
Hi can you help me I need to access my life story windows and especially the conversations with a person I had in December. I need this information to help identify a person who has been accused of! *
-
I hope that I have defined my problem definition correctly and the formatting is not lost.I have two tables table 1 and table 2Table 1AcName TID MIDDLE LTime $vdateAAA 123 777 11/01/15 03:00 11/01/15AAA 456 777 01/11/15 15:00 11/01/15BBB 789 888 11/0
-
How can I create a new folder of 'This PC'?
I just got a computer of windows 8 and I want to know how to create a new folder for my games in the section 'this computer '. Whenever I have try yo it puts just the folder in another when I want it with all the others. Thank you