3 rundll errors appear every time I restart my laptop

Similar Questions

• An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk".

  Hi all

  An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk" there is no disk in the drive. Please insert a disk into \Device\harddisk1\DR1.

  I'm a bit confused with this error message, I don't know if there are viruses in my computer, or the reason why this error message whenever I start my computer,

  Although I installed file encryption software.

  This could be a virus? and how to prevent this error message appear on my computer.

  Sounds like malware. Run msconfig.exe, and then selectively uncheck items under the Startup tab until you find the culprit.

• cocodede80070422 Wiondows 7 udate same error appears every time you start. Impossible to verify new updates. Followed to fix windows nothing helped.

  errorcodede80070422 Wiondows 7 udate even appears each time you start. Impossible to verify new updates. Followed to fix windows nothing helped.

  Hi Colin,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem you found error 80070422 when checking for Windows updates. This problem may occur if one or more of the following conditions are met:

  1. The Windows Update database is damaged.
  2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
  3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
  4. A required system file is incorrectly registered.

  I suggest you to try the steps below and see if it helps you to solve the problem.

  Method 1

  I suggest you to check if you are able to access Windows Update services and also make sure that the following services are started. If it is not started, follow the listed below as follows:

  a. press the Windows key + R, type "services.msc" (without the quotes) in the Run dialog box to start, and press enter.

  b. Locate the Windows Update service.

  c. right-click on the Windows Update service and select Properties.

  d. in Startup type, select enable.

  e. click Start under Service status.

  f. click OK.

  g. Repeat steps c to f for the following services :

  CSP & Background Intelligent Transfer Service.

  If these steps do not help to solve the problem, you can proceed to the step below and check.

  Method 2

  Step by step instructions for the fixed number.
   
  (a) press the Windows key + X , and then select (Admin) command prompt.
     
  (b) on the prompt window open copy and paste commands (all at once)
   
  net stop wuauserv

  net stop cryptSvc
   
  net stop bits

  net stop msiserver

  Ren SoftwareDistribution.old C:\Windows\SoftwareDistribution

  Ren C:\Windows\System32\catroot2 catroot2.old

  net start wuauserv

  net start cryptSvc

  net start bits

  net start msiserver

  (c) wait for the course to complete.
   
  (d) close the command prompt.

  Now, try to reinstall Windows updates and check if it helps.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Losing internet connection every time I restart my laptop wireless.

  I have a linksys WRT54G2.  I have no problem on the line until I have to restart my laptop.  When I'm beck for windows... I have to go through all the

  configuration of the router, then the wireless again.  All I have this problem and solved?  Thnaks for any help people.

  Thanks for the info.  I downloaded the updates for my router.  with the new firmware and the new network Magiic, after resetting my router, I can now restart my llaaptop and I am always connected when I get to windows.  In addition, the Network Magic is great... much more easy to use and faster.  Thanks to a person who has detailed how to download and update the new firmware.  This forum is great.  Thank you all.

• Every time I close my laptop and he goes to sleep, when I reopen it the lid it restarts and I get the following error.

  Hello

  Every time I close my laptop and he goes to sleep, when I reopen it the lid it restarts and I get the following error. Can you please help? Thank you!!!

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 9f
  BCP1: 0000000000000003
  BCP2: FFFFFA8004AC8A10
  BCP3: FFFFF80004053518
  BCP4: FFFFFA8009274DC0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\WINDOWS\Minidump\092812-30045-01.dmp
  C:\Users\Kevins\AppData\Local\Temp\WER-78078-0.SysData.XML

  The minidump files showed a DRIVER_POWER_STATE_FAILURE (9f) persistent stop error that seems to be caused by the Netwsw00.sys:

  BUCKET_ID: X64_0x9F_3_Netwsw00_IMAGE_pci.sys

  The Netwsw00.sys, which is dated March 12, 2012 is a driver for Intel wireless network adapter.

  Even if it's a fairly recent version of the driver I would suggest trying the following update utility from Intel and of whether there is a newer version available and, if so, install the:

  http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu

• I'm alert saying 'there is problem at startup msijmm32.dll' every time I restart my computer.

  Dear team,

  I'm alert saying ' there is problem at startup msijmm32.dll' every time I restart my computer.
  Please suggest to solve the same.

  Thank you

  Hello

  1. are you able to start your computer successfully?

  2. what was the recent change in hardware or software performed on the computer before the question?

  If you receive an error for "msijmm32.dll", it's a Trojan infection masquerading as a system file.

  If you receive an error message about 'msimg32.dll' is a correspondent for desktop applications and transparent bits in Windows system file.

  Please follow the links below to hep the problem.

  Method 1

  If you are able to boot to your desktop, please run a virus scan that the file 'msijmm32.dll' is a known infection.

  Please scan the computer for infections by using the links below.

  Reference link:- http://www.microsoft.com/security/pc-security/default.aspx#Safety-products-and-scans

  Microsoft antivirus software: -.

  http://www.Microsoft.com/security/PC-security/malware.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2

  If you are not able to boot to the desktop normally, and then start your computer in safe mode with network and follow method 1

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: Only internet wired connection will work in safe mode with network, if there must be procedures for troubleshooting which requires the content of the internet, then please download the content in normal mode and pass t safe mode, in the case of a wired connection, please connect a cable directly.

  Method 3

  If you are facing the error for the dll file msimg32.dll, try re-record it manually in safe mode or in normal mode.

  a. click on start
  b. type term (right click and run as administrator)
  c. type regsvr32 msimg32.dll and press enter

  Also run a scan of system files Checker

  Run a System File Checker tool

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• "unrecognized usb device": error message every time that a usb device is plugged into one of the usb ports

  "unrecognized usb device": error message every time that a usb device is plugged into one of the usb ports

  1. my laptop - acer aspire 5030 - has been having this problem for the last five months.

  2. I tried everything including changing service pack, as we have xp professional, he has recently upgraded to vista business 32-bit with service pack 1.

  3 tried all the methods start the laptop after a few hours, remove the battery, press the power button for half a minute, and so on.

  4. I finally he formatted a couple of times, but the problem is not.

  5. later, I improved the professional system of vista and installed the latest security patches, but the problem remains

  6. now, I started to update its drivers, although the device is identified to be connected, but is not recognized. "the error message" not recognized usb device "appears. I try to reinstall the drivers or upgrade of drivers, it does not. It displays the message "the drivers for this device are to this day.

  7. initially, the connection of the device, the drivers are installed but still the device does not show in Explorer.

  8. I tried to change some registry values by merging a regedit file in the registry - for display devices that are not present; but still, it has failed.

  9. I then tried to delete the file infcache1.inf in c:\windows\system32\inf, but the problem persists.

  10. Subsequently, I tried to create another registry entry to "disable selective suspend" in HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB by adding DWORD and assigning a binary value of 1.

  11. I tried later also to uninstall all the system devices including USB controllers, drives and the storage controllers, who must still without success.

  12. I tried to see if the drivers in safe mode, which they did not.

  13. I tried to delete the following registry entries =

  HKEY_LOCAL_MACHINES\System\CurrentControlSet\Enum | USB PORT; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFCI-08002BE10318 & HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFCI-08002BE10200.  The computer does not have alow it.

  14. the BIOS indicates device pnp "disabled", which I also look for the BIOS settings, which do not allow me to change to change existing ones.

  15. I have not found the WINDOWS\SYSTEM32\drivers\USBSTOR file. SYS in my driver store. This affects the system?

  16. I also contacted manufacturers pnp devices that provided me with most recent and versions compatible drivers for my devices - namely an apple ipod & Seagate external HARD drive - but even after that the drivers are installed properly and the system rebooted the problem remains. Is this something to do with the updated playing driver registry entries does not after the update? OR is what registry entries are configured to only read the entries at the time of the installation of the OS?

  17. I also contacted local sellers who have suggested to me to change the "motherboard". This will help as a last resort?

  18. in the meantime I had also installed other operating systems to Linux - Fedora and Ubuntu; Full Windows XP - Home & Professional and Vista Edition. All these have been installed successfully but do not solve the problem of usb.

  19. I have also raised the original HARD disk & replaced by another HARD disk. also checked the power of all ihee and ehee usb ports to be at least 5 V. I also disabled the automatic deactivation of devices usb by the system. physical contact, ports and connecting cable is fine. the distribution of power is set at 10% for the ihee ports and 20% for ports ehee, which is what is should be the physical output is also close to 5V for all ports connected.

  20. all professional (hardware or software) should any solution for the problem of the usb ports on my laptop?

  Something that you haven't tried:

  How to fix USB device not recognized in Windows

  http://www.online-tech-tips.com/computer-tips/USB-device-not-recognized/

  I hope I could help

• I try to update Framework 4.0 and every time I restart the server after installation. 4.0 isn't on 3.5 just here.

  I have a server to SP1 Windows 2008R2 with .NET Framework 3.5. I try to update Framework 4.0 and every time I restart the server after installation. 4.0 isn't on 3.5 just here. Why it does this and how do I upgrade to 4.0 to run programs that require the 4.0?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I continue to be ask to install an update: when I do I get this error message every time... WindowsUpdate_00000646""WindowsUpdate_dt000", I use windows vista

  I continue to be ask to install an update: when I do I get this error message every time... WindowsUpdate_00000646""WindowsUpdate_dt000"

  I use windows Vista

  Hi Phdshrink,

  Who is the update that you are trying to install and you get the error?

  You can download the update in the given below link and install the same in administrator mode and check what is happening.

  http://catalog.update.Microsoft.com/v7/site/install.aspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am trying to download audio books to my library's WMA. I get 'error 0xC00D2781' every time.

  Original title: error0xC00D2781

  I am trying to download audio books to my library's WMA. I get 'error 0xC00D2781' every time. How can I fix?

  Hello

  Reset Windows Media DRM has allowed little to solve similar problems.

  Reset Windows Media DRM by deleting all files in the Windows Media DRM folder. Note that the Windows Media DRM folder is a hidden system folder. To view hidden folders and files, follow these steps:

  a. Click Start and then click my computer.
  b. on the Tools menu, click on Folder Options and then click the view tab.
  c. click Show files and folders and then click to clear the Hide protected operating system files check box.

  Location of the Windows Media DRM folder: C:\Documents and Settings\All Users\DRM

  If you can't find the Windows Media DRM folder, the exact location of the folder on the computer is stored in the following registry key. Ensure that this key points to a valid path:
  HKEY_LOCAL_MACHINE\Software\Microsoft\DRM\DataPath

  Note By default, the path is displayed in binary format. To view the path to plain text, double-click DataPath. In the Edit binary value dialog box, the path is displayed in the right column.

  Registry warning
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

• I can't uninstall nero-it always tells me that there is no incd and it happenes every time it restarts. I tried to uninstall nero, but it's a pain the...

  I can't uninstall nero-it always tells me that there is no incd and it happenes every time it restarts. I tried to uninstall nero, but it's a pain the...

  Hello

  I suggest you download Nero removal tool, and then try to uninstall Nero and check if that helps:
  http://www.Nero.com/enu/support-Nero7-tools-utilities.html

  Check if that helps.

• Error message every time I try to update Java

  Original title: Java get error message every time I try to dl
  error message 1606 every time that I try to put up-to-date Java

  http://Java.com/en/download/FAQ/remove_olderversions.XML

  "Can I remove older versions and I need multiple versions of Java installed on my system?

  http://Java.com/en/download/Inc/windows_new_ie.jsp

  'Download Java for Windows'

  I hope that the information above to fix the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• When I try to download the update of windows I get an error code every time: 802440F.

  When I try to download the update of windows I get an error code every time: 802440F. Can you please help me solve this problem?

  @ Evanston only!...

  You see the effects of a hijackware infection! If you had used the computer longer, I might recommend trying to detect & remove infections. But it would probably take a week or two and I'm sure you have better to do with your time right now so I would recommend the following (which shouldn't take any more than two hours of uninterrupted time).

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation and formatting the hard drive option" (or "reinstall it Windows 7") http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7 article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  VERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool again Norton before installing updates AND BEFORE installing your new application antivirus (for example, Avast5 or Microsoft Security Essentials, free).

  Tip: Do not install Spybot again; It's really overkill in Win7 my humble OPINION, especially if you are installing Microsoft Security Essentials.

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Wish I had better news for you.  Good luck & achieve before Thanksgiving 2010!

• It says I have a download error, and every time I download it says the same thing

  It says I have a download error, and every time I download it says the same thing
  

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Are you using a computer administrator account will be full read/write permissions?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• I had a power failure and I learned today that there is a problem with the cache and I need to go to Preferences, purge the cache. I did this, but get the same error message every time I open the subsequent times of bridge.

  I had a power failure and I learned today that there is a problem with the cache and I need to go to Preferences, purge the cache. I did this, but get the same error message every time I open the subsequent times of bridge.

  Mac or PC? Version of the OS? What version of CS?

  Have you tried to reset the bridge? CTRL (Windows) / Opt (Mac) + click on the bridge to start icon and select open boxes.

  Otherwise, you could manually delete the cache, but we need to know the answers to questions to say where he is.