[Resolved] RAY questions

Similar Questions

• Key to the button 'resolved' in question was not fixed so I re-post

  Hello again

  Recently, I asked a question and was happy to receive an answer as fast, but it was my first time using the Apple community support discussion format. After reading the suggested solution, in my attempt to answer, I hit the button solved by mistake, but the suggestion I received did not solve my problem - but I appreciated the suggestion. When I realized that it seems that my problem has been resolved, but wasn't really, there is no way to undo that so I'll ask my question again.

  I get a message saying my iOS crashed by third party and need to call the phone number to set. I'm stuck on this page, and no matter what I do, message keeps flashing. I tried dragging up close and also off screen iPad but that did not help... I was raised immediately to the same message. I used the browser Google Chrome safari not unfortunately. I read the threads on the other people who have had the problem though, they were using the safari browser. There seems to be a way to fix if you are using safari, but I couldn't find any resolution of the problem when using Chrome. I understand from reading the discussions that this message is a scam and I know not not to dial the phone number.

  I would be very grateful and thankful if someone could help me solve this problem!

  Thank you very much!!

  Delete and redownload Chrome.

  (138790)

• Error "could not resolve the question of Convergence.

  Hello

  I work with the Multisim13 and I when I am trying to implement the design attached shows a window saying ""failed to resolve the issue of Convergence"as shown in attachment."

  I found similar topics here

  http://forums.NI.com/T5/circuit-design-suite-Multisim/how-to-solve-simulation-error/m-p/838043/highl...

  http://forums.NI.com/T5/circuit-design-suite-Multisim/problem-with-simulation/TD-p/2603281/highlight...

  BTU were not up to the solution to this.

  Thank you.

  According to the OPA381 data sheet, it is designed to work with capacitive loads up to 100 pF, by inverting the configurations of the amplifier and as an amplifier to transimpedance, which is usually used with a current input (very low) and comments fairly large resistances.  Your circuit works with capacitive loads of ~ 5 uF (50000 x the design load), unity gain, setting up inverted, and with an input voltage.  Depending on how the model for the OPA381 manages these outside normal range values, convergence errors are not too surprising.

  The network of coupling between stages has a low pass cut off ~1.3 Hz. The first entry of the step network is more complicated but also the limits of bandwidth at very low frequencies.

  What is this supposed to do?

  I faked coupling and feedback networks (assuming ideal unity gain amplifiers). It is the output with a 1 volt of entry.

  

  Lynn

• G7 2269wm blu ray question.

  OK guys im back again, I searched this forum and have not really found what I was looking for, so I have a pavilion 2269wm with windows 8.1 g7 pro. I have a blu - ray player I want to install, it comes, what do I have regarding the drivers, or software to play blu ray movies. Thank you.

  the blu - ray player out of my pavilion dv7 3165dx, the motherboard is bad if im using this drive as it was blu - ray.

  I have installed the drive, and haven't tried to use the cyberlink media said suit but no disk installed in the drive, so don't know what to do then.

  I also bought the windows media pack but don't know what that makes also.

  Hello

  Try to install the version of HP of Cyberlink PowerDVD 10 on the following link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-114877-1&cc=us&DLC=en&LC=en&OS=4132

  Kind regards

  DP - K

• Pavilion dv7-6b78us/Blu-Ray Question

  My pavilion dv7-6b78us there a blu - ray player?

  Hello

  According to its specifications, it is said: engraver of DVD SuperMulti Multimedia Drive which means no BD drive.

  Kind regards.

• Photosmart C309a: Printer does not work after uninstalling and reinstalling to resolve the question of the HP Solution Center

  HP Solution Center has stopped working so I followed the advice of HP Support Assistant to uninstall and reinstall the printer.

  Cannot get printer to reinstall successfully, and more, none of the physical controls on the printer will work much longer, even the power of the power button.  Have to unplug the power off.

  Ironically, I found since the 'solution' through this forum to get Support HP Center works again by uninstalling a recent Windows Update, but do me no good now.

  I tried to uninstall and reinstall the software of the driver several times without success and I'm worried that the function keys not working not not at all on the printer indicates an internal matter that cannot be repaired.

  Anyone encountered this problem?

  Hello - Thanks for the reply.  Power the device power on and off has not fixed anything.  However, suspecting an internal firmware issue, I did a search on the web to see if there was a mechanism to reset.  I found a very useful website that describes three levels of resets, and the second level one (#6) fixed my problem.  I'm surprised HP doesn't have this information in its documentation or on its website.  I understand he has the potential to be used for the wrong purposes and perhaps make an irreparable problem, but it is clearly the solution to an inoperable Panel.  My printer was working fine before this problem and is now back to work again.

  http://resetprinters.com/three-ways-to-reset-the-Photosmart-Premium-fax-C309a-all-in-one-printer/

• Question of ink

  I just installed new cartridge 564XL in Photosmart.  The yellow is not printing.  Any suggestions as to why not?

  Thank you

  Chuck

  The document here can help to solve problems with the yellow ink print not on your Photosmart Plus.  Be sure to check the vents, as on the three solution.  If this does not resolve the question of the post here can help.

• Question of proportions for my 16mm film / digital

  I'm very new to all this, so I don't know is it's a simple question with an obvious answer, but I thought that it is better to throw in the community. I'm currently editing a film I shot on 16mm film, so it would be in the Academy report. When I had digitally transferred it they provided the black bars on the left and right sides of the framework so, technically, it's a picture big screen.

  

  I ran into an issue. I have some photos that I caught on digital for various reasons and I need these shots to match the black bars on the sides left and right of the images shot on film.

  

  This is a screenshot of my settings in sequence if it helps resolve my question

  

  How can I go about adding matching vertical bars on my digital photos?

  Drop the images in the chronology and culture

  This will give you black bars...

• Can I have several e-mails come in letters and records same mailboxes?

  My father's been using Windows XP Outlook Express. There, several e-mail addresses which all the download in the same Inbox, and then it moves into a whole bunch of files named he created. Currently everything is pop3.

  Can that be set up in Thunderbird? How do we? You can then choose to download an address at a time? On a Mac Pro.

  I see how to configure the identities, then you can choose between them when sending. Which solves the outgoing needs there.

  Once resolved, next question is whether you can do the same thing if they are all defined as IMAP?

  He is very attached to its XP and stressed hoping I knew how...! Thank you!

  In Thunderbird and POP connected accounts, you can set allows them to use the global Inbox in the local folders. You set this in the settings for each account. A built in tool is the unified folders view which reorganizes the display of files and shows a composite view of similar or equivalent records.

  I think with global Inbox and folders such as Sent, Trash, junk and autodefinies all records to be in local folders, your father would have something very close OE in appearance and function.

  Global Inbox is not supported with IMAP. I guess you could invent such an arrangement, but in principle, with IMAP, a file you see in Thunderbird is a mirror of what is on the server. If an Inbox that has been truly synchronized with the connected servers will have to break this rule. If it contained messages from several servers, it couldn't really represent what was in one of them.

  I imitate such behavior by using search folders saved, in which I understand the messages, unread, recently arrived, specific project and so on. But the saved search folders are stupid enough individuals; they don't really sync because they are effectively read-only (from the point of view of the user) and independent account.

• Why there are no simple option to create an account? Why should people go through all this just to comment on a post?

  I tried to comment on a post here which really helped me. I wanted to show my gratitude, but firefox says I need an account for this, but there was no sign in option. It took me so long to go through all the drama out of the blue. Just make it simple.

  Most of the time users have problems that have already been resolved.
  This is the reason why we recommend users to consult articles support and resolved the questions before asking a new question.

  In fact Mozilla Support allow users to leave their comments on a thread or a response without any account with 3 buttons:

  • I have also this problem, under question
  • Yes and No next of what was useful for you? below each answer

  (see attached screenshot)

  More the vote of a question or an answer, more increases its visibility.

• script editor

  I have the following problem with the script editor.  I have a script that goes through a spreadsheet Numbers cell-by-cell and examines the background color for each cell.  If the background color is yellow it it turns green.  I couldn't get this script to work therefore inserted a Display Dialog statement in the loop to show what background color has been found.  After seeing the color of a few cells, I hit the button cancel from the dialog box display.  After that I can not open the script editor - it starts but they appear then the beachball and it's there.  Force quit the script editor does not resolve that question does not restart my Mac.  I noticed that there was an update waiting for OS X El Capitan, I have so installed.  Strangely, after the script editor open, and I was able to run the script, but after cancelling the dialog box display I'm stuck now even once - script editor crashes on opening - I still think trying to open my script.  How can I get around this?

  I am running OS X El Capitan, version 10.11.6 MacBook Pro (retina, 13 inches, end 2013) 8 GB of memory

  Original post updated.

  Looks like it is a problem with the Script Editor.  I downloaded a trial version of script debugger and it runs the script without problem. I tried to run other scripts that I knew used to work and that they will not open with the script editor.

  Can I reinstall Script Editor without having to reinstall the entire OS X?

• Thunderbird interfere with MSE updates. There is a patch for it?

  An MSE update causes a complaint 'failure of the network connection. If Thunderbird is closed and the system restarted, the MSE update has been completed. This has happened three times, with the closing/restart process resolved the question in each case. I use XP SP3.

  Y at - it a patch for this problem?

  The question is moot.

  MSE will not install. I experienced the usual cleaning, service stops and corrections of error associated with that pose problems with MSE.

  No dice.

  I should have left the lie of dog asleep... something I knew before starting this process. I prefer that things work as it should in contrast half fast. As the preference and the fact that there are still Microsoft is a mutual dichotomy that will never be resolved.

  Thank you for your comments.

• How can I fix the error SSL 61 (Linux OS)

  Whenever I try to connect to my customer's internal Web site light Linux OS I get the error SSL 61. Firefox is the only browser on the workstation. There is no connection problems of Non-Linux systems on any browser, including Firefox.

  Below error:
  SSL error
  Contact your Helpdesk with the following information:
  You chose not to approve "Go Daddy Secure
  Authority - G2 of certification', the issuer of the server
  security certificate (SSL 61 error).

  How can I fix this error? I tried to install the cert manually at the client.

  COR - el: this does not resolve the question for SHA1 certs.

  I added the certificate to the Citrix DB. I finally found the problem after researching on Citrix forums and other various sites.

  This question is the cert itself, we bought a cert and use SHA2, however the Citrix Receiver of Linux does not support at this stage the SHA2.

  So either the only resolution retype the cert to use SHA1 or wait for an update from Citrix.

  Thank you both for your time.

  c

• Need help, cannot connect to http sites, https only...

  BLUF: I can connect only to HTTPS Web sites, http gives me 'unable to connect to the server' or "no route to host" errors.

  While I was out of town, the woman finished downloading something on his MBP that cause a lot of pop-up ads any time during the use of the internet.  I ran Malwarebytes Anti-Malware and it found and removed a bunch of infected files.  All this while the computer was on OS X 10.9.x. Since that time, on any browser (firefox, safari, chrome) we can only connect to the https pages.  For example, http://www.google.com = no go "impossible to connect to the server...". ", while https://www.googlec.com = good, but unfortunately most of the links is http, so it is useless.

  I spent most of the last days 2 pouring on the forums, and troubleshooting to resolve this question... what I did:

  Reset my router (without success, all the remains connected to it is good (everything else is also Android/windows))

  Reset my modem (even had my ISP reset everything they could on their end too)

  Back to zero/reinstalled all browsers,

  erased the PRAM using the option + command + p + r at startup.

  verified that no Proxy box is checked in the advanced network settings

  tried to change the DNS, manual, auto, opendns, 8.8.8.8/8.8.4.4, using my ISP DNS googles, nothing changes.

  uninstalled all that was installed last week (not a lot, but now I don't know what it was).

  disabled the browser all extensions/plug-ins.

  IPv6 disabled/re-enabled (set to auto),

  What works:

  Safe mode, internet is full to the top.

  While in safe mode, I was able to connect to the app store (could not in a regular connection or guest user) and upgrade to OS X 10.11.5, but even the installation that does not solve all missing / corrupted files, I always have the same question.

  I thought for sure the new OS would have fixed it, but now I'm really stumped.

  Is there a way to reset completely all network settings? Could get blocked port 80 (http)? How can I tell?

  Any help would be appreciated,

  v/r

  Sean

  (a husband who knows enough about computers to really break, ha)

  First, never use any type of software "anti-virus" or "anti-malware" on a Mac. That's how cause you problems, not how you solve them.

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The procedure is easy to do right, but it is also easy to do wrong, so I had very detailed instructions. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin") in Safari. Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• After update Windows 7, have to reinstall firefox 26, session restore button is available but does not work even if the sessionstore file is there

  I am running Firefox on Windows 7 26. Last Windows necessary to make some updates to safety, the night I closed Firefox I normally do it, use the tab out and let windows to go forward with its updates. This morning I found that Firefox has been removed. I tried to find out that my last night sessionstore.js file still exists and it does. When Firefox came all my tabs have disappeared, also my favorites, modules, etc. I clicked on "restore previous session", but nothing happens. I have a file of last night bookmarks in the bookmarks folder, and the file sessionstore.js is dated last night when I closed Firefox in a normal manner. I'm puzzled. Firefox didn't fail, I closed it as I always do before that I have authorized Microsoft Windows Update and restart. Who am I lack/hurt? I leave this open session so that I can continue to have access to this file sessionstore, as I have it copied in a folder that I use for this kind of disaster. This windows necessary also deleted my MailWasher Pro program update, changed how the Windows Explorer and more 'fun '. Thank you, Microsoft. It is barely possible that I can recreate my tabs and it would be extremely aggravating, but I have no way to re-create all my favorites. I need help.

  Hello
  If you have not closed since the last time that you can type in "subject: sessionrestore ' on the page and there should be a list of tabs from last time. If this consistantly come please see the history on open gint settin settingand

  Firefox > General Options-> view my tabs from last time
  Privacy > history

  Have these options will prevent tabs away, after the browser is closed.

  Please let me know if this does not resolve the question of restoration session being closed. We can help if it is touched by a plug-in by starting the browser in safe mode.