3 updates, but nothing shows

Similar Questions

• Windows 7 Ultimate told to updates, but nothing happens

  I have fresh install of Windows 7 Ultimate 32 bit and I tried to do the first update, but when I click search for updates, it is said of the updates, but nothing happens, green line retains circiling arround for hours and nothig. Can someone help me?

  Thanks much for the reply, but I managed to fix it myself. I put windows automatic update options, left my PC for a few hours, and when I had to stop, said updates are ready to install, and after restarting it installed updates. After that I changed the update options to never check the update and check the updates manually and it works perfectly now. Obviously, after having install Windows and you want to first update should be set to automatic and stay on the line for a few hours, after the first update, you can change the options to update at your convenience, in my case manually check for updates.

• I received a notice of "software update" (Firefox 10.0.2 update), but nothing happens when I click on "Update Firefox" - button

  I downloaded Firefox about 6 months ago, and since I was not able to make softwareupdates. I get pop up notice on updates available, but nothing happens when I click on the update Firefox button.

  Yes.

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

  • Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Installing_Firefox#Mac_os_x

• HP Pavilion a6750f turns on but nothing shows up on monitor

  Hello. recently whenever I try to start my computer, the unit will start and the power led is on (also light in the back is green), and the fans start to run in what appears to be at full speed. However, nothing shows up on the monitor connected to it and no beeps. I would like to know when my computer would work and when nothing display because when the computer was going to start and work, fans stopped for one or two seconds after turning on the pc, and then the fans would start again. If the fan does not stop for a few seconds, I knew that the pc does nothing (what happened).  This problem has happened several times to me and how my brother used to face was cold start quickly (hold the power button until it stops) and start again until the fans stopped. This no longer works. I wonder if certain connected USB flash drives appear to be the problem; they have not worked when I plugged (on any computer). I checked all the cables, tried to re-plugging into another outlet (they both failed). the cables seem alright, but I have not yet checked inside the motherboard.  This pc is about 2, almost 3 years. any help is appreciated.

  First of all, I would like to remove all devices and cables.

  Then reinstall only the power, the monitor, the keyboard and mouse. If it starts, then isolate the problem by adding 1 element at a time.

  If not start, I unplug the power cord and remove the memory. Add 1 to the first slot closest to the CPU. Then plug the power back and re - start. If it starts, repeat the process to find the memory defective barrette.

• Flex in a week: run the mxml, but nothing shows

  Hello

  I do the flex in a week course. Pain in the ass to see the design mode is gone but good no worries.

  In any case, I run the mxml and nothing shows. I also ran the swf that was produced and Yes - empty. However, the code seems fine so I am confused.

  < / s:Application >

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:Application ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx".

  minWidth = "955" = "850" minHeight >

  <!-exercise 1.01: implementation of your project-> files

  <!-- Styles ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->

  < fx:Style source = "Styles.css" / >

  <!-- Script ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->

  <!-statements ~ ~ ~->

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  <!-UI components ~ ~ ~->

  < s:Label x = "10" y = "34".

  width = "690" height = "40".

  Text = "" Employee Portal: vehicle request form ""

  styleName = "titleHeader" / >

  < s:Form x = "10" y = "70" >

  < s:FormItem label = "employee:" >

  < s:DropDownList / >

  < / s:FormItem >

  < s:FormItem label = "office phone:" >

  < s:TextInput / >

  < / s:FormItem >

  < s:FormItem label = "Mobile phone:" >

  < s:TextInput / >

  < / s:FormItem >

  < s:FormHeading label = "Dates" / >

  < s:FormItem label = "pickup Date:" >

  < mx:DateChooser / >

  < / s:FormItem >

  < s:FormItem label = "Date of return:" >

  < mx:DateChooser / >

  < / s:FormItem >

  < s:FormItem >

  < s:Button label = "Submit Request" / >

  < / s:FormItem >

  < / s:Form >

  Are you sure that you run the mxml right? A few time to create a new also helps. Sometimes templates html (js files) are absent from this cause an error javascript and nothing to load. Usually, the own generation project done. If you right click on the generated swf file that shows?

• I tried to download the Lightroom 4.3 update, but nothing happened

  I just purchased Lightroom 4. After installation, I was prompted to download the 4.3 update, but when I click on download, nothing happened. I tried 4 times. I have a Mac Pro running 10.6.8

  SOLVED this MYSELF (.. extinguish anyway.) I had been using the Firefox browser, which is normally more compatible with downloads, but after reading an old answer to a similar question, I tried the Safari browser and it worked the first time.

• My bluetooth and wlan refused lights. I've linked enabling the setting but nothing shows up there. What can I do to fix this...

  I tried to activate the console bluetooth, WiFi or just off bluetooth completely. I tried to use the command Setup but nothing happens. Wireless bluetooth and wlan settings are simply empty.

  Is there a hardware button or a FN key on your keyboard? It might look like a satellite dish or even signal bar, please understand this part. But if there is a button, press it and check if all of the parameters of return on.

  Concerning

• My creative cloud said its update, but nothing is downloading!

  I have a project to do and my creative cloud repeat its update, but it has stuck on 0% my indesign and photoshop are no where. I can't pay every month for something that's not going to work.

  Hello

  Please visit https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html

  You can also view updated Creative Cloud stuck at 0% and will not uninstall! and installation stuck at 90%, update stuck at 0%

  Kind regards

  Sheena

• When I try to download AE or Premiere its says download free trial but nothing shows

  I tried to install the free trial of After Effects and Premiere Pro. When I click Download trial its says on the next page "is downloading now..." "but nothing happens for a long time. My creative cloud opens as well, but there is nothing on these software only Photoshop I have installed before

  I use Windows 7 and the browser I was using was Google chrome before but later, I tried Internet Explorer.

  Hi ivanateles,

  You might want to try to download the available direct download links to: http://prodesigntools.com/adobe-cc-2014-direct-download-links.html

  Please make sure you follow the instructions mentioned on the page before you start the download.

  Kind regards

  Rave

• Firefox 24 says Java and VLC should be updated, but they show that they are the most recent versions. How to eliminate the designation wrong update?

  I checked the updates of plugins Firefox 24 and it showed that I needed to update Java and VLC media player even though I knew I had the latest versions. I ran FF update for both links and rebooted but still said that both need to update after a new analysis. I uninstalled both programs then re-installed the latest versions. FF always says I have v2.06 VLC and I 'vulnerable' but the VLC software shows that I have v2.08 which is the last. Java is now properly recognized and are more marked as in need of update. How can I get FF to recognize that I have the latest version of VLC? Thank you.

  I know that VLC has a problem that they don't update their file serving the Firefox plugin, and I'm not sure Java but you can check the licensing of Java on trusted sites.

• Why do I receive flag showing that I have a problem and insert the disc. but nothing shows

  Why do I get a red flaag showing I have a problem and to insert the blank disc aa, what I do, but the flag persists?

  Hello

  • What disk you insert?
  • What are the instructions?
  • How long have you been faced with the question?
  • Are there changes to the computer?
  • The problem is present in Safe Mode and clean the boot?
   
  I suggest you run the Analysis System File Checker and see if TI the problem still occurs. To do this, please see the following article.
  http://support.Microsoft.com/kb/929833

• no error, but nothing shows up - function main wrong?

  Hey, I'm compiling this program and I have no error but the applet shows, then disappears without showing anything! It should show 2 clocks!

  import java.awt.*;
  import javax.swing.*;
  import java.util.*;
  
  public class StillClock extends JPanel {
    private int hour;
    private int minute;
    private int second;
  
    public static void main( String arg[] ) {
          StillClock SC = new StillClock(4, 20, 45) ;
          StillClock SC2 = new StillClock(22, 46, 15) ;
      }
  
    /** Construct a default clock with the current time*/
    public StillClock() {
      setCurrentTime();
    }
  
    /** Construct a clock */
    public StillClock(int hour, int minute, int second) {
      this.hour = hour;
      this.minute = minute;
      this.second = second;
    }
  
    /** Return hour */
    public int getHour() {
      return hour;
    }
  
    /** Set a new hour */
    public void setHour(int hour) {
      this.hour = hour;
      repaint();
    }
  
    /** Return minute */
    public int getMinute() {
      return minute;
    }
  
    /** Set a new minute */
    public void setMinute(int minute) {
      this.minute = minute;
      repaint();
    }
  
    /** Return second */
    public int getSecond() {
      return second;
    }
  
    /** Set a new second */
    public void setSecond(int second) {
      this.second = second;
      repaint();
    }
  
    /** Draw the clock */
      @Override
    protected void paintComponent(Graphics g) {
      super.paintComponent(g);
  
      // Initialize clock parameters
      int clockRadius =
        (int)(Math.min(getWidth(), getHeight()) * 0.8 * 0.5);
      int xCenter = getWidth() / 2;
      int yCenter = getHeight() / 2;
  
      // Draw circle
      g.setColor(Color.black);
      g.drawOval(xCenter - clockRadius, yCenter - clockRadius,
        2 * clockRadius, 2 * clockRadius);
      g.drawString("12", xCenter - 5, yCenter - clockRadius + 12);
      g.drawString("9", xCenter - clockRadius + 3, yCenter + 5);
      g.drawString("3", xCenter + clockRadius - 10, yCenter + 3);
      g.drawString("6", xCenter - 3, yCenter + clockRadius - 3);
  
      // Draw second hand
      int sLength = (int)(clockRadius * 0.8);
      int xSecond = (int)(xCenter + sLength *
        Math.sin(second * (2 * Math.PI / 60)));
      int ySecond = (int)(yCenter - sLength *
        Math.cos(second * (2 * Math.PI / 60)));
      g.setColor(Color.red);
      g.drawLine(xCenter, yCenter, xSecond, ySecond);
  
      // Draw minute hand
      int mLength = (int)(clockRadius * 0.65);
      int xMinute = (int)(xCenter + mLength *
        Math.sin(minute * (2 * Math.PI / 60)));
      int yMinute = (int)(yCenter - mLength *
        Math.cos(minute * (2 * Math.PI / 60)));
      g.setColor(Color.blue);
      g.drawLine(xCenter, yCenter, xMinute, yMinute);
  
      // Draw hour hand
      int hLength = (int)(clockRadius * 0.5);
      int xHour = (int)(xCenter + hLength *
        Math.sin((hour % 12 + minute / 60.0) * (2 * Math.PI / 12)));
      int yHour = (int)(yCenter - hLength *
        Math.cos((hour % 12 + minute / 60.0) * (2 * Math.PI / 12)));
      g.setColor(Color.green);
      g.drawLine(xCenter, yCenter, xHour, yHour);
    }
  
    public void setCurrentTime() {
      // Construct a calendar for the current date and time
      Calendar calendar = new GregorianCalendar();
  
      // Set current hour, minute and second
      this.hour = calendar.get(Calendar.HOUR_OF_DAY);
      this.minute = calendar.get(Calendar.MINUTE);
      this.second = calendar.get(Calendar.SECOND);
    }
  
      @Override
    public Dimension getPreferredSize() {
      return new Dimension(200, 200);
    }
  }

  Edited by: Christopher on May 28, 2011 03:05

  How do you run that? If you run it as a normal program via main(), I expect that it ends when the hand ends.

  You are creating two JPanels but does not create a window frame/for they appear in. If you try this

  JFrame frame = new JFrame();
  frame.setLayout(new FlowLayout());
  frame.add(SC);
  frame.add(SC2);
  frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
  frame.pack();
  frame.setVisible(true);
  

  You will see a window with your clock in them.

  Published by: Peter Lawrey may 28, 2011 12:40

• The settings appear correct, plug-ins appear updated, but nothing works and it takes minutes to move from one site to another.

  Pop - ups disabled but I am getting, but not much. Ad Blocker apparently activated, but no advertising are blocked on the pages of the site. Passage to my Yahoo mail takes an infinite number of times, and work within the enamel is also. I had similar problems in Google Chrome (which has features I prefer - maybe just because I'm used to) so I thought I'd see if I could avoid in Firefox, but it seems that I only have another set of problems - no real crashing, as Chrome, but a LOT of very long crash.

  Hello

  Please see this.

• When I change the type, I do not see what is available. The screen drop happens, but nothing shows up except the default fonts.

  

  Magic,

  This should fix:

  Open system preferences and go to accessibility. Then select display in the source on the left side list, then check the box transparency reduced.

  It was introduced in this #15 post by TheUlser:

  https://forums.Adobe.com/message/6854594#6854594

  It has been described on this page from Adobe:

  http://capitalmacservice.com/font-preview-working-Illustrator-CS-5-Yosemite-fix/

  It may also depend on the monitor, as shown in the message #29 by Loncar in the same thread.

  Of course, this also affects other things so there can be a downside to it.

• iPad pro list 3 updates in waiting but nothing downloads

  can one please tell me why my new iPad Pro shows there is 3 updates to install, but nothing shows downloading or waiting for download.  My Internet connection works fine.

  Greetings drongo999,

  Thank you for using communities Support from Apple!

  It appears from your question, that you see a badge on the App Store, showing three app updates available, but when open you not seen all the apps that need to update. If this is correct, there are a couple of different troubleshooting steps that I would recommend.

  First of all, to completely close the App Store using the instructions in the following article.

  Force an app to close iOS - Apple Support

  The App Store has been closed, restart your iPhone.

  Restart your iPhone, iPad or iPod touch - Apple Support

  Once your iPhone has rebooted, you still see the badge informing you that you have updates available? If so, are there available updates when you open the App Store?

  Have a great day!