3 with the old SWF files

Similar Questions

• Flash CS3 with the old flash files

  I'm using flash to make the files that play other swf files that worked very well problems...
  Problem 1:
  What I have are swf files are a preloader that loads another swf inside file. They play very well until I tried to put them in a html page. This is how they have been all along, in an html page, and they worked. somehow now the SWF (the preloader that loads the swf file) will not play, just white. (example of this is on points following page to the left click down the face with sunglasses on this subject http://www.christykarpinski.com/videos/myeyes.html )
  Problem 2:?
  I tried to make new files with the same preloader model that I had used before, but with newly made swf files loaded in it and he won't play at all.
  
  So I tried to make a new preloader file (found a model online) and used this but it happens just to where I was in problem 1. they work, but not once I put them in the html page.
  Problem 3:
  I tried to make new files flash with the new loading until a former SWF preloader and it won't play properly. (here on this page, click on the second square in and then your suppose to be able to click three times and get different images - this employee to work - http://www.christykarpinski.com/videos/myeyes2.html)
  
  But if I do load a new SWF works fine (except as noted above, not when I put it in an html page)
  
  I guess Im wondering if all this has to do with the help of CS3 now and old files deployed on CS (or could even MX I don't remember now)? no idea at all would be great. any ideas what I can do?
  
  I'm sure ive left something, it's a bit overwhelming trying to keep all straight. and frustrating

  That must be it. I could not get to work with the new model preloader, he just had a lot of mistakes. but when I used the old model preloader, it worked fine.
  Thank you!!!

• Communicate with the embedded SWF files

  So if I have several external swf into one big, how can I communicate with each other?

  More specifically,.

  -the swf principal needs to know when the keys were pressed in a shipped, and he needs to tell you all the other included those on this subject.

  -embedded SWFs must intelligently resize and shuffle around each other, while keeping their origins coordinated in the upper corner.

  How can I go about it?

  As long as you mean by "shipped" you load swf files in you main file dynamically, then there is hope for all that you have planned.  If you mean that import you into the library by embedded and plant them in the chronology of the main file, that does not work.

  The other event and the event or Manager is coded in the main SWF.  Are the code loaded SWF to displatch events than the main file of the headphones for.  If simply scream of the loaded swf when they will, not for mutual assistance who hears him... allowing them to compile without dependence on the master file.

  If in the film loaded, which triggers the need to rehabilitate the main file in action would send an event as follows...

  dispatchEvent (new Event ("eventName")); name of the event you want to

  To add the listener in your main swf file, listen for the complete event of load on the Loader.contentLoaderInfo which is used to load the file.  In the complete event handler, add the listener for the event on the loaded swf file.

  function loaderCompleteHandler(e:Event) {}
  MovieClip (e.currentTarget.content) .addEventListener ("eventName", eventHandler);
  }

  function eventHandler(event:Event):void {}
  trace ("load swf triggered event");
  }

• Red screen on the page with the embedded swf file

  My application refused:

  I am testing your app on the BlackBerry Dev Alpha Device (OS version 10.0.9.1675). When I try to open the sub category of your app, it's only showing a red blank screen appears and does not respond.
  

  It works very well in ripple, but I can't get the Simulator working and I don't have an alpha of dev, so I can't test it myself. The subcategory is just a HTML with a built-in .swf file.

  Download the full source code

  Any suggestions?

  Hello

  You have this function in your config.xml file?

• Last update of features not available with the old site file

  Downloaded the latest update with the functions of breakpoint, but when I open an older file, the MUSE desktop looks and works like the old application to MUSE.   But with the same MUSE when I start a new site, all the features are there.  I also noticed that when I went to download most old site after doing some updates in the last MUSE updated app, it worked as a newer site would be using the new features.  In other words, I don't see or have the scroll bar to the right or the other options available for an older site, but if you create a new site.

  Y at - it a fix for this please?

  -RS

  Looked again, his point of view Page called and he helped.  Thank you!

  -RS

• Open the old SWF files in Flash Pro (was: old files .swf)

  I have a lot of old created .swf files in 2001 that I'd like to update. The version of Flash, I have currently is Creative suite 5 will not be open. What do you recommend?

  Cannot open SWF files in Flash Professional.  To open SWF files, you must use Flash Player runtime.

  Flash Professional can be used to open the .fla and then files when you publish the .fla file, it generates corresponding .swf files that can be played in Flash Player.

  If you work, you can copy paste this work into the document to ActionScript 3.0 created in Flash Professional CC 2014.

  Rgds,

  Mukesh

• Can I publish documents Indesign to Ipad with the included SWF files?

  Thinking of buying Adobe CC at $50 per month. My immediate desire is to turn my website http://www.VisionSimulations.com in an iPad app. The site is built around the SWF file created in Swish. InDesign can include of these sovereign wealth funds in the documents published to the iPad?   I don't mean with a ton of hard coding, either. 

  Also, I could put a forum on my website. InDesign are something like an iFrame in my document, so that people can see my forum through the app?

  Thank you!

  Roger

  Transferred to DPS forum.

  Lol SWF is completely supported.

  Yes, you can use an overlay of web content to view the site, but before start you on this you should most definitely get acquainted you not only with the DPS, but with Apple requirements for applications submitted to them.

• It is impossible with the latest version to convert file .tif in pdf. It was possible with the old version.

  It is impossible with the latest version to convert file .tif in pdf. It was possible with the old version.

  OK problem was with acrobat dc. I have desintalled it and reinstalled adobe reader 11. It's ok now. Thank you

• Threats of virus after a clean install... where is the 'old machine' file?

  My PC has a virus; My anti virus would not repair it... After doing a clean install of Windows XP, I remember reading that I can delete a file named 'old machine' if the new installation worked. I installed Microsoft Security Essentials... For 3 days, everything worked was great until this evening...

  Tonight, I ran an update of virus definitions and then run the 'full' scan Microsoft Security Essentials has notified me that I had a few threats. There was also a warning on a temporary file and asked if I wanted to send it to Microsoft I did...
  I am trying to be proactive and prevention viruses take over this machine again... I remembered reading after installation 'own' that I should remove the file 'old Machine' if the computer works well after the clean install? .. .also had a warning on a temporary file.
  Any idea where I can find the 'old machine' file; (I thought the clean install would remove all)... I did a search on my computer and come with nothing
  Help, please!...

  Hello

  Step 1: You can remove it in c:/Windows. With the help of old cleaning disc.

  In the disk cleanup, select the previous installation of windows. Put a check mark to remove it.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Step 2: Run a virus scan to make sure that the computer is Virus-free:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  For more information:

  The disk cleanup tool stops responding while it is compressing old files on a Windows XP-based computer

  http://support.Microsoft.com/kb/812248

  It will be useful.

• Problem with the transfer of files from the computer Windows XP to Windows 7 using Windows Easy Transfer.

  Original title: Put WET on the old computer

  When I try to use WET to transfer from old Win XP Win 7 again, I need trasfer WET to the old computer.  So I choose this option and move on to the part where it says "Select the USB flash drive where you want to save WET".  Well, in the window is the word "computer" I can't click on it, nor is the OK button light up.  What's wrong?

  Hello

  Thanks for posting in Microsoft Community!

  It seems that you have a problem with the transfer of files from the computer Windows XP to Windows 7 using Windows Easy Transfer.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  I suggest you try the procedure described in the link and check if it helps.

  Transferring files and settings: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

  For more information, please see the links.

  Transfer files and settings from another computer
  http://Windows.Microsoft.com/en-in/Windows7/transfer-files-and-settings-from-another-computer

  Windows Easy transfer

  http://Windows.Microsoft.com/en-in/Windows7/transfer-files-and-settings-from-another-computer

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Have windows 7 installed and office 2007. Cannot open the old excel files. Error reading .xlsx is not a valid Win32 application

  Have a new laptop with Windows 7. Responsible for Office 2007. Cannot open the old Excel files. Get the error reading .xlsx is not a valid Win32 application when I try to open the file.

  Right-click on the Xlsx file and select open with.  Then find Excel and make sure that it is selected to always open with this program.  Click OK, and then see if it works

• I have a new computer and I can't allow it to Adobe Digital Editions because my Adobe ID is always associated with the old computer.   .

  I have a new computer and I can't allow it to Adobe Digital Editions because my Adobe ID is always associated with the old computer.    The old computer is not operable, so I can't use it allow for out of this computer.  I don't want to create a new Adobe ID, because I don't want to create a new email address just to do this and my email current is already associated with an Adobe ID

  1. Close all applications on the new device.
  2. Click Start > run.
  3. Open, type regedit in the text box and press ENTER. The Registry Editor opens.
  4. In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept
  5. Select the key of the follower.
  6. Choose file > export.
  7. In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.
  8. Right click on the key to the follower, and then choose Remove.
  9. In the dialog box confirm the key deletion, click OK.
  10. Close the registry editor.
  11. Open Adobe Digital Editions and reauthorize.

• The 11g using uninstall tool to remove the old binary files?

  Hi all
  
  I know that with 11g, the preferred method for deleting old binary files is to use the uninstall tool (in/deinstall/of-install $11G_HOME). However, is it possible for me to remove the old binary files using this tool?
  
  For example, my 11g ORACLE_HOME (that is to say that I want to keep and use) is /opt/oracle/product/11.2.0.3/db
  
  And I have the following binary files on a particular database server:
  
  Oracle@myserver:/opt/Oracle/product > ls
  
  10.2 11.1 8.1.6.2 8.1.7.1 8.1.7.4 9.0.1.0 9.2.0.2 9.2.0.5 agent
  10.2.0.3 11.2.0.3 8.1.7.0 8.1.7.3 8.1.7.4.32 9.0.1.1 9.2.0.4 9.2.0.6
  
  As you can see, I have binary files dating back to before the beginning of time (8.1.6, nice) and I wish I could clean it carefully.
  
  I tried to uninstall (just under the checkonly, to ensure that it "sees" the old house) 10.2 binaries using the 11 g uninstall tool and got the following error:
  
  /opt/Oracle/product/11.2.0.3/DB/deinstall/deinstall-Accueil /opt/oracle/product/10.2/db - checkonly
  Verification of the required files must be treated and...
  Please wait...
  
  ERROR:-House does not have to be defined for a deinstall linking in an ORACLE_HOME.
  Uninstalling the current House is supposed to.
  
  Any thoughts? I absolutely don't want to uninstall the current home!
  
  Mark

  If you want to get rid of the old the ORACLE_HOME, then you must use the corresponding version of uninstall and must be run from the ORACLE_HOME.

  The best way to remove the ORACLE_HOME is to deattaching the old ORACLE_HOME with inventroy and remove this old House.

  /oui/bin/detachHome.sh
  

• control the loaded swf file

  Hi all

  I am loading a swf into another SWF, I want to controll loaded swf such as play and pause the swf. The loaded swf file is an animation file, all animations are kept in a movieclip, then please tell me how I can control the animation.

  In your first assignment, you tell the animation is present in a movieclip.  If this movieclip is in the loaded swf file you will probably need to target this movieclip to tell him to play rather than the SWF itself, as in...

  currentSWF.movieclipName.play ();

  where movieclipName is replaced with the name of the instance of movieclip in the loaded swf file.

• Resizing of the imported swf files...

  I have a clip I want to import a swf file, the swf file is larger than area of the clip. I tried to use a resize code for the import of images that I found, but it makes the very small swf. Is there a way to control the size of the imported swf file?

  Maybe something like this should work, based on what you say.

  My code was a bit more complicated because my equivalent of the charger clip changed size and shape sometimes and I had to accommodate that.

  There is also an another gotcha with this... it's easier if the content inside your charger clip has its top left corner at 0,0. Otherwise, you must assign target_mc _x and FLF properties in the onLoadInit region where I mentioned also.

  To help understand the target_mc is just a reference to the element of the view inside "loader" that is passed to the listener, onLoadInit function after that the swf file is loaded.