Venue 11 7130 - in mode connected standby

Similar Questions

• Connected standby mode

  All current machines will support connected standby mode in windows 8? Eve connected allows one machine to sleep briefly turns on, check the updates (IE twitter, facebook, emails), and then to go back to sleep. It would be cool to beable to close my W530, out for a bit and come back and see I'm new e-maisl while the machine was asleep.

  No current modles, the first devices to appear will be tablets and ultrabooks.

  Intel has yet to release all of the chips that support it.

• ASUS ME400CL battery quickly in mode drains standby connected

  I have asus ME400CL tablet with LTE. It runs about 45% / 16hrs in connected mode ensures even in airplane mode. The only way to get to 5-6% energy consumption is to disable the usb host controller which modem is connected to in Device Manager. Asus technical support said that everything is fine and that he refuses to replace/repair defective modem/device.

  I'm sure that this is not normal for a device to use much battery connected mode to standby. Is it still valid "systems that support."
  "Connected pending MUST discharge less than 5% of the battery capacity system over a period of 16 hours idling in the default transmission configuration? The Tablet comes with win8 and I suppose it must meet the conditions. Any ideas how to prove to asus for this device does not work as expected?

  I got my device replaced twice. The third argument works very well, so it was definitely a hardware problem. Software that affects as well, since I'm a big battery drain sometimes, especially after MS updates or is the result of a hung process. Restart fix for me. Regarding the single usb port, I use cable usb Y that allows me to plug in any usb device + charger at the same time.

• Windows 8 and/or Surface Pro supports "connected standby mode?

  Hello

  I just read that ' a Windows 8.1 feature called connected standby mode, which allows computers to be put into mode 'sleep' and wake up instantly, is available today than in the 32-bit version "is the reason why" first Trail Bay tablets will use only the 32-bit version of Windows 8.1 ".»

  But if this is true, don't would then not it means that the Surface Pro running Windows 8 Pro 64 bit is therefore unable to use "connected pending"?

  I didn't notice the Surface Pro or the W700 Acer having problems coming out pending, then perhaps 'connected standby mode' is another type of sleep?  Can someone explain to me.  The "instant on" feature (the case of illusion, or for real) is what tablet users and so Windows 8.

  Our company has been delaying the replacement of our laptops Windows XP until the release of 2.4 GHz, 64 bit, 8 GB RAM, SSD 256/512, 4 G/LTE Mobile Broadband Bay Trail devices come to market.  As a benchmark, we are looking for a device (/ Ultrabook/Tablet laptop computer) that would be able to effectively deliver business applications, for example Adobe Photoshop, MS Powerpoint.  2 to 4 GB of RAM will not be enough.

  It will be Haswell devices without a fan, we have to buy these, even if they are much heavier and have reduced the battery life because it seems that it would not be until 2015 that see us peripheral Bay Trail capable business, see the articles below.

  http://www.TomsHardware.com/news/Atom-Bay-Trail-Valleyview, 19244.html
  Mobile Atom SoC stay 32-bit at least until 2015
  Somewhat surprising is the notion that Intel will keep its Silvermont Atom processor as a 32-bit platform until at least 2014. Customers who need the ability of 64-bit Atom will have to the Centerton Atom-S the microserver-based processor. It is not known if the successor of Silvermont, the 14 nm Airmont, will move to 64-bit

  https://www.NetworkWorld.com/news/2013/091213-Windows-81-tablets-with-64-bit-273770.html

  Buyers looking for a tablet with the new Bay Trail Atom from Intel chip and a 64-bit version of Windows 8.1 will have to wait until early next year.

  Intel executives said Wednesday the first Trail Bay tablets will use only the 32-bit version of Windows 8.1, despite the support of 64-bit on the chip.

  Tablets with OS 32 bit have a limit of 4 GB of DRAM memory, while 64-bit can actually support 512 GB. Most of the first tablets Trail Bay with Windows 8.1 will not more than 4 GB of memory, said Steve Smith, Vice President and Director of development for the tablet at Intel.

  "We have the capacity, now it's a matter of when a system of consumption needs, it's probably somewhere in the future, I would say that a few generations away ', said Smith.

  The reason is the limitation in the software of Microsoft, said Nathan Brookwood, principal analyst at Insight 64. A feature of Windows 8.1 and wake up instantly, called Eve connected, which allows computers to be put into mode 'sleep' is available now than in the 32-bit version.

  Microsoft adds functionality to the 8.1 Windows 64-bit, and it will be available in early 2014.

  Intel also does not feel 64-bit is required on consumer shelves, even if he knows what IT managers want 64-bit compatibility on all PCs and mobile devices in the enterprise.

  Intel is developing a smart Tablet Trail separate Bay scheduled for 64 bit versions of Windows 8.1, and the processor will be available in the first quarter of next year, said Chris Walker, Director general of tablets at Intel Mobile Communications Group.

  2 Surface Pro supports NOT connected to sleep, even if it uses the "Haswell" chip, which supports this mode.

  There is a world of difference between standby connected and traditional modes of 'Sleep' and 'put to sleep '. Basically, connected to standby mode, the system really is, but requests are suspended for most. See here for a Microsoft document that gives an introduction connected mode standby.

  I don't know why the 2 Surface Pro does not deliver sleep connected; I've seen several data, possible reasons for why this might be true:

  • The 64-bit Windows 8/8.1 version does not support it.
  • It is necessary that the material to be a fanless design (Surface Pro 2A fans).
  • It is necessary for the design to have TPM (Trusted Platform Module) version 2.0 (Surface Pro 2A version 1.2)

  Whatever the reason (and it can be one or more of the above), it is disappointing that a product of the so-called phare does not support the feature.

• Windows 10 build 9926 unusually heavy use of CPU on the venue Pro 7130 i3 11

  Define how the other owners of 11 Pro 7130 meeting places had good success in the management of the Windows 10 preview, I conducted today a place in upgraded from 8.1 to 10 build 9926 (the one with the Continuum, which is great), but I'm having the issue of constant between 50 and 99 percent high CPU load , with no guilty in the Task Manager. Before you go to format and do a clean install I wanted to ask if anyone knew this problem.

  EDIT: the unusually high load seems to be triggered by a process called Windows Driver Foundation - user, whose executable mode driver is wudfhost.exe.

  A complete reinstallation did not help.

  EDIT 2: If someone experience the problem, disable completely the service named "Windows Driver Foundation - user-mode driver framework" helped, with seemingly no ill effects, although after weird restarting it may need to be disabled later.

  As a warning, I note how in general, it is never a good idea to go mucking in services.msc.

  Some information about my experience with the Windows preview 10, the two pre - and after Cortana on a Dell coming Pro 11:

  1. Builds before the last Technical Preview 9926 looked much more like Windows 8.1
     1. They shared the same start menu and app store. It was almost like 8.1 with all it's bugs ironed out - and a few goodies in. Really worked well on my V11P.
  2. 9926 build adds many new features - but also adds tons of bugs.
     1. Look around the net and you will see common problems that are corroborated by many users of the technique of the preview. You will have to take the good with the bad.
  3. Upgrades (from 8.1 to 10) on-site are problematic - ESPECIALLY with the most recent Technical Preview 9926
     1. My installation of the latest version of Win10, migrate my settings 8.1 resulted in an installation with tons of questions. My Active stylus barely worked - sensor HID driver will fail to load and having problems. He would go to the mode standby and never go on low power, draining my battery. He had 100% fail still to wake up from its sleep - I would get a black screen that requires a hard shutdown and reboot. I also had the CPU usage very high with the WDF service. As mentioned above.
     2. Overall, a lot of things online really as you can imagine - and this is frankly not worth it to upgrade on site.

  So, with that said - what was the solution?

  New installation.

  Here are the steps to get the best Windows 10 installation on a coming 11 Pro (I know - in my experience).

  1. Download the version of ISO - installation of a USB disk with the utility in Rufus 
     1. Boot on it by pressing volume up several times during boot up until you get the boot menu. Then use volume up to move to the bottom of the list - low volume to select the highlight boot device.
     2. After the installation of the key USB - copy the most recent copy of Dell Wireless driver for your Intel/Dell Wireless card, a copy of 7-zip, and a copy of the latest Dell cabin Pack for the 7130 file in a directory on the USB drive (make one, name drivers or something).
  2. Install the Windows technical overview 10
     1. Delete all partitions on disk 0 (or whatever your SSD) until you have one unpartitioned space - and install it.
  3. When you first - start your screen will be slow/choppy as all hell!
     1. This is mainly due to the fact that there are very few compatible drivers cooked in Windows 10.
  4. Do not start to install the drivers from the Dell site - many will prove to be obsolete.
     1. Only install the drivers from Dell/Intel Wireless to obtain network connectivity and the internet
     2. Then install 7 - Zip and extract the CAB Driver Dell file in a directory on your C:\ called "C:\Dell.
  5. Now you have a network connection - start Windows Update
  
  
  1. Windows different Intel chipset - including video device drivers will begin to download.
  2. It will ask to reboot - let him.
• Now - if your tablet is something like mine - after it restarts, it will start flickering like hell.
  1. This is the video driver Intel panic hell. Tablet may hang - just persist through the pain and continue.
  2. I found mine to panic more with the help of the touchscreen - so I plugged a mouse.
  3. Mine has been fixed by disabling "Auto Refresh Panel" in the Intel graphics options menu (click Law Office, Graphics Options). This setting can be found under the section power options.
     1. Do it and restart. My flicker ceased thereafter.
• At this point - I expected and wanted things worked, but open Device Manager
  1. (Start menu - type "Device Manager") - or-(Start Menu-> Control Panel-> Device Manager)
  2. There was a last device without driver SM Bus controller. Click - Update right driver and point it to the directory of D:\Dell you have extracted the CAB file.
  3. It was't until what I installed the driver for the device that he would go to sleep properly connected.

Now - a word of warning. Unlike earlier versions of win 10 - my Eve connected sessions drain about 1, 500 MW/h. That's what I saw in 8.1 Win no matter what I tried - I wonder if there is some sort of driver problem - and replacement needs. My sleep study reports show some offenders - everything works for less than 1% of the sleep cycle, but the material is not a descendant to C3 to sleep, which is where the power drain is. Looks like a driver chipset of a certain type of malfunction - I'll do a trace and try to isolate the problem.

Apart from that-, all has been MUCH more stable. Sleep (although draining the battery) are coherent rock, I have the high utilization of the processor in the stronger WDF service, and the active stylus works exactly as it should.

I'll stop it between uses for now - and keep stable and see if there is a driver chipset or something that solves this problem.

• Re: Satellite Pro M30: cannot enter hibernation mode or standby

  I have a Satellite Pro model M-30 # PSM35E-000NU AR recently the hard drive crashed and I installed a new 80 GB replacement.
  Now I can not access the 'characteristics of hibernation or standby.
  In addition, shortcut keys are inop.

  When I go to programs, utilities Toshiba the only option available is SD memory card format.
  I can't access the link of "accessibility". and I can't access the configuration of H.W Toshiba.

  Can anyone help me with any of them?

  Hello

  For me, it looks like you don't have Toshiba drivers all installed and necessary.
  Have you used the Toshiba recovery disc after the HARD drive has been replaced or have you installed the Windows XP using a clean CD Microsoft?

  Please note that the common Module are very important!
  You must install this software first!
  The Toshiba Power Saver help you to enable Hibernate mode and also to access standby mode!

  On the Toshiba European pilot page you will find all necessary drivers and you'll also find installation instructions.
  Follow m this and I sure will get you everything works again!

• 15 - r110na: connected standby

  This laptop has moderator drivers installed as part of the Windows 8.1 desktop activity. These drivers allow standby connected.  I don't know if this model of laptop supports connected before.  Anyone know please?

  https://social.msdn.Microsoft.com/forums/Windowsdesktop/en-us/26629db2-6d33-427C-A767-8c857d775079/w...

  Hello

  I doubt, it does not support this, but you can check by entering a command prompt

  powercfg /AVAILABLESLEEPSTATES

  Kind regards

  DP - K

• Network TCP/IP XP mode connection problem

  I just bought Windows 7 pro and installed XP mode in order to run programs that only work with xp.   My question is that some can tell me how I can connect to a specific network in xp mode.

  Hello

  Virtual machines use the hardware of the host, but for their own internal use, they imitate their own material.

  XP-Mode is always 'wired' even if it is co tailing on a wireless card. For example, you cannot run a XP-Mode Wireless. A valid connection is chosen by the

  Host and the virtual machine uses a card PCI of Wired Intel 100 Mb/s, getting its signal of the current host connection.

  When you configure the updated virtual computer to use the adapter on the host computer.

  http://www.ezlan.NET/Win7/XP-mode-NIC.jpg (This is done in the general framework of the VPC).

  If you have a router with DHCP, it will then automatically obtain an IP address as a standalone computer.

  Otherwise (in the XP VPC ), examine the properties of the network card and configured its TCP/IP as you would with any other XP Pro computer in network.

  You can use the static IP address or set it to automatic get.

  For example, http://www.ezlan.net/example/tcp2.jpg (this is done inside of the EPM XP Mode, it runs active on the screen).

  Set the static IP address under Win XP, http://portforward.com/networking/static-xp.htm

  -----------------

  When all the foregoing is configured correctly, the XP-Mode acts as a standalone computer on the network. It follows all the ordinary rules of connection to local networks, sharing files and printers, as well as connecting to the Internet on its own.

• WiFi printer always 'offline' mode after standby Vista

  I recently bought a Canon mg5200 wifi printer.  I use it on my home network with a Netgear router.  I have a problem where whenever I put my Vista laptop using the 'sleep', when restarting the printer goes into status 'offline '.  It requires a power cycle of the printer to my Vista laptop to re-establish the connection.  I don't think it's a problem with the printer or router.   Even when he says 'offline', I can still print documents from my desktop XP it's hard, connected to the printer.  I can literally print a document from my Vista laptop, stop to sleep mode, reboot and suddenly it says printer is offline, all within a few minutes, so I don't think it's a matter of printer sleep mode either.  Also, when I check my router, it will show such printer that connected to the network.  I saw the other headings on the same issue, but you have not found satisfactory answers.  Any ideas on how to keep Vista connected to my wifi printer?

  Hi jayrph,

  You can check out the following link and try the suggestions provided by Robyn-technician support and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/printer-stops-working-shows-offline-at-random/0e88380e-4e7c-41c0-bcc8-6bf8afa32e7a

  You may also change a setting for the printer to prevent it from going to sleep. For more information on this, you will need to contact the manufacturer.

  http://USA.Canon.com/Cusa/page.action

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• Venue 8 3830 - unable to connect to the pc, USB icon does not appear

  When you connect the Tablet PC, a USB icon is supposed to appear and you are supposed to be able to transfer files back and forth between devices.

  No such icon appears on my tablet.  I chose the Media Device option.

  Any suggestions?

  Try to connect to your pc, disable usb debugging mode.hope it works

• Meeting place 7130 Intel Smart Connect agent technology is not running

  I have a GT 7130 with an i-4300Y processor and a 256GB SSD LiteOn and 8 GB of RAM

  I was a symbol of exclamation flashing in notification on Smart Connect drawer. I click it and it says that intel Smart Connect technology Agent does not run

  I tried to go to Services and tried to manually sgtart the Agent technology Intel Smart Connect, and it opens a box that says The Intel Smart Connect technology Agent on the computer started and stopped Local service. Some services stop automatically if they are not in use by other services or programs.

  I tried to repair the installation of Connect Smart with Dell drivers.

  Is it OK? Tablet works great as it is but just curious to know if I need to do something to solve this problem

  Thank you!

  I just updated the BIOS to A09 (released yesterday).  Then, I went into the BIOS and enabled the SmartConnect technology (it was not checked).  When I logged into Windows, I still had the same problem.  Then I went to Services and start the service, and it worked.  I rebooted and do not get more error.

• Games on a venue Pro 7130 11 8/256?

  I've taken over a 'exit - new' Pro 7130 coming 11 8/256 last week (dock keyboard and stylus too) and I'm crossing my fingers that there not any question that I saw posted here, especially in the 'Freeze' huge wire. If she has any questions I can do some troubleshooting, but probably will return it before my 30 days are up. I can't afford to be stuck with a defective Tablet this expensive and be unable to return.

  In any case, my world is perfect with a 11 place works perfectly, I would like to make some plays of light on it. I have a ton of available older games I've bought over the years on Steam, Humble Bundle, GOG, etc., which I think could run. For example, games like Baldur's Gate 2, Defense Grid, FTL, Kingdom Rush, etc.

  Recommendations for this table/CPU can manage well? I don't mind reducing the necessary resolutions game performance.

  Has anyone connected a X 360 controller? If so, the problems with him?

  I recently had the chance to try the same coming 11 Pro model and I can answer your questions for you safely. Intel HD 4200 of the vPro model isn't exactly hardcore gamer material but it will get the job done admirably well more often expect naturally. It is more than enough for one of the applications on the Store. It can also play several games of office before 2008 at the higher and somewhat more modern settings with medium or low settings. Referring to my own experience and that of other securities experienced, there is the series half-life series Jedi Knight, Star Wars Battlefront, Quake 4, Call of Duty 2 and Fear just to name a few.

  Some recent games like Civilization 5 cannot be read to quick, but without fear. They are still able to work with low settings very well. If you are unsure if a game will work, just look to see if the minimum specifications specify if it can be played on a Radeon X 1950 XT (sometimes referred to as "Radeon X 1950 series") or the Geforce 7900 GTX (sometimes referred to as "Geforce 7900 series"). The reason why both of these desktop graphics is more old cards about position until, or offer the same performance as the Intel HD 4200. In any case, your tablet will be able to make the deal if one does.

  I am pleased to say also that the Xbox 360 gamepad works well. As long as the game says that it supports a Xbox 360 controller, it will work on your Tablet coming 11 Pro.

• Error recovery mode after standby. Upgrade to Windows 7?

  I have a laptop Sony Vaio with Vista. It was freezing upward during the recovery (I close the lid between uses that puts the PC in standby mode) making me do a hard reboot. I took it to the GeekSquad because I have a svc contract and think it could be material. They said material was beautiful, but I had spyware (I use Norton anti virus and it is up-to-date and running weekly) causing problems. Also said they were concerned that I had 9 dropouts of kernel in the log file. They suggested a complete wipe and reload. I was wondering that if an upgrade to Windows 7 would be a way less invasive for updating the kernel, there is a lot of work to clean and recharge! Another symptom is Internet Explorer seems unstable and often says he has encountered an error and stops it self.

  When Windows does not work right, upgrading the operating system probably will not help and could fail or make things worse. Boulder computer Maven
  Most Microsoft Valuable Professional

• Internet conection problem in windows 7, window 8 mode connect very well

  On my computer, I can successfully connect to the internet when I'm with windows 8, when I go on Windows 7 or Office I can't connect to the internet if I have I go in the menu windows and connect to internet, I have no problem. My internet security installs and runs on the desktop it I can update or install everything new

  Hi Richard,

  Thanks for the reply.

  Use this link to find the model number of the laptop.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c00033108

  Once you find the model number, please visit the website of the manufacturer of the other computer and download the latest drivers for the wireless card. Download the driver file and install it on this computer.

  We will start your computer in safe mode with network and check if you can access the Internet.

  To start in safe mode, refer to the suggestions for the following link:

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the methods above didn't help, try the following steps:

  a. type Cmd in the search to start, right click on command prompt select run as administrator.

  b. now, enter each command at a time and press the Enter key

  netsh int ip reset c:\resetlog.txt

  netsh winsock reset catalog

  ipconfig/flushdns

  c. type Exit at the command prompt, and then restart the computer.

  d. after the reboot, check if still face you this problem.

  Keep us informed on the status of the issue.

• The FTP.EXE program included in Windows 7 and Server 2008 help the PASV Mode connection

  What is the FTP.EXE program included in Windows 7 and Server 2008 helps to connect in PASV Mode?

  I ask because I had a strange experience with her. First, I will mention that I did hours of research and found many articles stating that it does not work in XP/2000/Server 2003, but I found nothing for Windows 7 or Server 2008.

  I found some people who kept him at work and others who could not. I tried with Windows Firewall turned off and will be on and firewall rules created. Others said it is not supported and that I should use a third-party FTP client. I could make it work in Internet Explorer and Windows Explorer. I am well aware of the situation these options in Internet Explorer.

  Here are the best real, I could run from the command line on my PC Windows 7 (32 bit), but not on Server 2008 64 bit.

  Now, before someone comes and asks me to check the firewall, I want to mention that I tried more than five clients of third-party FTP Server 2008 and they all worked perfectly. In addition, from the same Server 2008 it worked fine in IE and explore.

  On Windows Server 2008:

  FTP client blocked on: 150 opening data of channel for the directory list.

  Windows 7:

  C:\Users\wxk1>Systeminfo | b/findstr/c: "Name of the OS" / c: "Version of the OS.
  Name of the operating system: Microsoft Windows 7 Enterprise
  OS version: 6.1.7601 Service Pack 1 Build 7601

  C:\Users\wxk1>FTP ftp.secureftp - test.com
  Connected to ftp.secureftp - test.com.
  220 - FileZilla Server version 0.9.39 beta
  220 - Written by Tim Kosse (* address email is removed from the privacy *)
  220, please visit http://sourceforge.net/projects/filezilla/
  User (ftp.secureftp - test.com:(none)): test)
  331 password required for test
  Password:
  230 logged on
  FTP > dir
  200 port command successful
  Data channel opening 150 to the directory list.
  -r - r - r - 1 ftp ftp bookstore.xml 1471 25 June 2007
  -r - r - r - 1 ftp ftp 279658 25 June 2007 hamlet.xml
  -r - r - r - 1 ftp ftp 80641 25 June 2007 hamlet.zip
  -r - r - r - 1 ftp ftp 2164 japanese.xml 25 June 2007
  -r - r - r - 1 ftp ftp 0 July 3, 2007 the new text Document .txt (2)
  -r - r - r - 1 ftp ftp 0 3 July 2007 new document texte.txt
  -r - r - r - 1 ftp ftp 4677 25 June 2007 nutrition.xml
  -r - r - r - 1 ftp ftp 8463 pigs.xml 25 June 2007
  -r - r - r - 1 ftp ftp 7581 25 June 2007 plants.xml
  drwxr-xr-x 1 ftp ftp 0 subdir1 June 25, 2007
  drwxr-xr-x 1 ftp ftp 0 subdir2 June 25, 2007
  226 transfer OK
  FTP: 697 bytes received in 0.01Seconds 46.47Kbytes / s.
  FTP >

  Also, I do not install a server FTP PASV will be IIS 7 or anthing like that, just try to connect to a server FTP PASV. Here is the test server that I used:

  http://www.SecureFTP-test.com/

  Type	FileZilla
  Address	FTP.SecureFTP - test.com
  Opening of session	test
  Password	test

  Details on using

  Chilkat provides this FTPS test account for all those wishing to test the secure FTP client functionality. You can connect to ftp.secureftp - test.com, connect as a 'test' with password 'test' and download that all files present on the server. The "test" account can also retrieve entries in the directory. There is, however, no downloading files on the server.

  Hello

  The question you posted would be better suited to the Technet community. Check out the link and ask the question.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer