3000 N200 upgrades

Similar Questions

• Lenovo 3000 N200 0769 - could I strap a video about this card?

  Hello

  I know that this question is asked before, but I have not found an answer that is relevant to me. I have a 3000 N200 series, version 0769. the original specs are: Windows Vista Home edition, processor Intel Celeron 550 2.0 Ghz, 1 GB RAM, 160 GB of HARD drive, video card integrated in the Chipset Intel 965 M (64 MB dedicated).

  Now, since the original specifications, I've upgraded to another (identical) 1 GB of RAM and a T7100 Intel Dual-core clocked at 1.8 Ghz CPU, and I am now running Windows 7 32 bit. The reason for which I've upgraded to the T7100 is because I saw a variant of the N200 with this CPU.

  My question is: am I able to Update my graphics card? I know that some 0769 variants have an another version of the graphics card, I think than a 256 MB GeForce. Can I get something like this up on my own? Or I hit the wall when it comes to upgrades?

  Please help me, I need a better graphic performance ASAP (work stuff). In addition, I don't have the money for a new laptop (possibly a new card mother or graphics card, but no more than that).

  Thank you!!

  Well, you can't go graphics without Exchange the
  motherboard with Nvidia graphics, which also
  had a different radiator Setup to handle the additional heat
  GPU. So I doubt a swap would work without modification.

  Swaps the motherboard used, IMO, are not profitable.

  RAM can be up to 4 GB, with 3 being a good compromise,
  and cpu Core 2 Duo T7500, which would be too minor for
  a helping hand to the T7100, unless you can find a good deal.

  Probably other processors that were also added later.

  In my opinion? Put the money towards a good laptop used
  with the specifications of need/want.

  Oh and the weak bios? There are a few bios modding communities

  There, but it's a high risk of adventure! See this post for an example:

  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-and-Z-series/Y460P-won-t-boot/TD-p/776363

• Lenovo 3000 n200 ram expansion

  Hi, I just bought a lenovo 3000 N200, it comes with 1 GB of ram... the thing is, I want to extend to 3 GB. When I bought it, they told me to come back Monday to install an aditional GB (you was a combo) and a promotion of lenovo, I won another GB (hu a little lucky!), can it be upgraded to 3 GB of ram? and if so, should it be 1 GB per slot or it takes 1 GB + 2 GB (2 slots)... Thank you very much in advance for your answers!

  It would probably be the case. But for normal use, 2 gig should be easy to do.

• Lenovo 3000 n200 - keyboard problem

  Hi all

  I have 2 years of Lenovo 3000 N200 0769 old

  Running on XP SP2

  Problem started two weeks before.  Few of the keys started working a bad (as the sticky key but not the case). Press TAB once, he answers key twice. WHT kindly advice would be the question. Hardware or software?

  Note: I tried USB keyboard using the cable in, I noticed that some the time laptop keyboard works well when the USB keyboard is connected... but some times only...

  I thought only to change the keyboard, but now in two mind. kindly advice...

  Thanks for your time

  Concerning

  Syed

  Dear Alex...

  You is not a hardware issue. I tried the keyboard driver update yesterday...

  I thought that the problem is resolved, but there is a problem...

  Whenever I need to upgrade the driver when all I boot the laptop...   WHT will be the issue?

  I have double o... / s xp and red hat linux...

  Adivce...

  Thank you for your time and support

  Concerning

  Syed

• Problem with CD/DVD-unit of Lenovo 3000 N200

  Hello

  I have a problem with my Lenovo 3000 N200 newly purchased. The CD/DVD-unit worked from the beginning, but now is not present among the readers, that I can see at the opening of 'computer '. The player is visible is the C drive ("SW_Preload (C'"). ")

  The CD/DVD unit actually reads the CD: s or Swedish I insert, but nothing more happens and "Microsoft Management Console" device CD/DVD-("MAT ** bip ** z A DVD-RAM UJ-850 ATA Device» apparaît, mais avec un petit point d'exclamation marque sur elle.)

  I sought unity for readers, but have found no and readers used are apparently own Microsoft driver for CD-ROM units ('C:\Windows\system32\DRIVERS\cdrom.sys', 'C:\Windows\system32\Drivers\GEARAspiWDM.sys' and "C:\Windows\system32\Drivers\PxHelp20.sys").

  The thing I did at the same time the CD/DVD has probably lost its good driver or something was to install Norton 360 from Symantec.

  I would really appreciate help with this question.

  I did, as a last resort, try the solution pa Cecilia on IDG proposed, tinkering in the registry in Windows Vista.

  I didn't like the idea at all, because I thought it was just something I have to do if I had been messing around in the registry or had done something 'strange' (such as actually Windows Vista installed myself, or upgrading or uninstalling drivers important etc) but at the end of the day, he worked , and it was much easier that I well during playback

  Excerpt from Microsoft technical support:

  "To resolve this problem, remove the affected filter drivers. To do this, follow these steps:

  1. Click Start

• Lenovo 3000 N200 wireless problem

  HY,

  I just installed windows xp sp3 on my Lenovo 3000 N200 laptop, I installed all the drivers and everything except wireless works.

  Wireless light does not illuminate when I move the button 'Activate', only the bluetooth light.

  I went to device maneger and saw that there is a 'mistake' in the network controller. I reinstalled the drivers for the wireless, but it still doesn't work.

  Help please.

  Hi all

  I just installed xp sp3 edition in my lenovo 3000 n200 and yes I had the same problem with the radio. I Googled it and found the correct dirver: driver Broadcom WIRELESS LAN, where you can find here http://consumersupport.lenovo.com/ot/en/driversdownloads/Drivers_Show_236.html.

  1 extract

  2. install

  When installing wireless led light started to Flash and it works perfectly.

  Sincerely,

  lukime

• 3 beeps on Lenovo 3000 N200 starts

  Bought a lenovo 3000 N200 on eBay that was dead, looked as if it was probably a failure of the motherboard to nothing lit up.  Got a 2nd motherboard user with the same number of eBay and mounted FRU 41R7886, now when I turn on the laptop the drive light lights for a few seconds, after he died, I get 3 beeps, cooling fan seems to stay on and there is nothing on the LCD or on an additional screen that I have connected to the laptop. Tried to remove the DIMM 2 and turned on again and the symptoms are the same as before, except no beeps. Can anyone help as to the likely cause of failure? Thanks, Dan

  Problem solved, thanks for all the great answers.

  I tried the memory two sims in my Lenovo 3000 C200 laptop and got exactly the same symptoms, dead PC and 3 beeps, discovered that one memory sims I was using was defective. This replaced and Lenovo 3000 N200 now up and running.

• Wich refers to a Lenovo 3000 N200 fan?

  (sorry for the bad English, I'm not English speaking people)

  Hello

  I have a Lenovo laptop 3000 N200 0769-A44 (S/N xxxxxxx 07/11).

  I have a noise from the CPU fan. I want to change the CPU fan, but I can't find the right reference.

  In the part of the system, 0769, there are 2 References: 41W5225 and 41R7795.

  The fan, there's the S/N ATZI8000700M1.

  Can you tell me which of the 2 references is right for my computer?

  Thank you

  Note of the moderator; s/n, under the direction of protection own members

  Intel graphics card: 41W5225
  NVIDIA graphics: 41R7795

  I think that yours has Nvidia?

• 3000 N200 TouchPad driver for windows 7

  someone at - it a driver for touchpad for my 3000 N200 for windows7?

  Two options:
  Install the Vista driver in compatibility mode.
  Download driver driver manufacturer, touch-pad.
  (Probably Synaptics)
  I used two methods on N100, both works.

• Windows 7 on 3000 N200 0687?

  Hi all

  I have a Lenovo 3000 N200 0687 - computer A11 laptop, and I am wandering if anyone has installed Windows Se7en on your laptop like mine, and I would like your comments how it works and if there is no problem? I'll install dualboot - with XP.

  Thanks for your review...

  Dean.S

  Hello

  I installed the N200 0769. Fast for the monitor in standby, wireless and external access keys do not work, but Lenovo Care allows you to extended standby/sleep mode or turn it Off under power settings button, if this isn't a big deal. When I run TpFnF5.exe manually, it works, then can still use it. All multimedia keys work.

  Fingerprint software UPEK works very well, by default software lenovo does not work, but I find Upek much better though.

  No problem here with windows 7, it's actually much smoother then Vista that was preinstalled and had hudge hangs out with multitasking, until I thought cut AHCI in the bios. With W7, I turned back and used instead, by default Microsoft drivers Intel and it worked much better then Vista I did my default OS W7

• Lenovo 3000 N200 - cannot access Rescue and Recovery - MBR poss problem?

  I have a Lenovo 3000 N200 sick who was running XP home. I could not start XP and can only access the Rescue and Recovery utility in the Lenovo recovery Partition that would be to rebuild the hard drive to factory settings IE. Windows XP with no data. I managed to copy the data using a Paragon backup cd and then made the fatal mistake of attempting a repair MBR, which was a very tempting option on the Paragon rescue cd. Now, not only it does not boot to XP, but I can run is even more Rescue and Recovery to reinstall XP which is the problem!

  If I boot with windows install disc and take the option recovery console it stops, statement that "recovery console could not find the hard drives connected to your computer. Setup cannot continue. "

  I was wondering if someone another backup MBR restore could help me with this?

  So, if someone has a Lenovo 3000 N200 work and is willing to try to save the MBR to send it to me, then please get in touch. It is probably useful to make a backup for yourself where the same problems happen to you!  In my view, there are a bunch of programs that backup the MBR for example MBRtool, MBRWizard and so on.

  Any ideas, offer accepted with gratitude.

  Yes I know I could buy the Lenovo recovery disk, but it is a matter of principle for me avoid paying £50 or so if I can avoid it! We'll see if we can help here...

  Thank you

  Simonides

  I am pleased Andyp!

  The solution was to set the primary partition to inactive and value the recovery partition Active, then restart and use the Lenovo Care button (now finally works) to access the function of recovery so I could return the laptop to factory State.

  No doubt there are plenty of ways to do it, but the approach I took to solve this problem is released under

  1. use another PC to download Paragon backup and restore (I actually used the trial edition now but the free edition may have a similar feature)

  2nd burn a CD bootable backup and recovery 10.0.

  3. start the CD Lenovo, and after a long wait, a menu should appear with 11 options, the first of them being Paragon backup and restore.

  4. Select Paragon backup and restore.

  5 select properties in the pick a task window and you will see two partitions, a big enough (in my case Go 143, called Preload) and the other is quite small (6 GB called SERVICEV001).

  Note: this is an opportunity brilliant to use the Back Up Partition option to make a backup on external drive USB of the two partitions as the reconstruction of the hard drive with Lenovo Care button you will lose all data.

  6 right-click the partition preloads and select Edit and set idle

  7. made the SERVICEV001 partition right click and select Edit and set the Active

  8 remove the backup and recovery of CD and put it somewhere safe

  9. restart the PC and Lenovo Care button (might be called something different) should now work, allowing you to restore the hard drive to factory settings which will erase all data of a personal nature. You did a backup?

  10 Windows should then start as usual, reinstall Paragon backup and restore, and restore your data.

  Finally, look at this as a lesson to

  (a) you get a writable DVD and use the Lenovo menu under windows to create a floppy disk from Lenovo rescue and recovery started.

  (b) use Paragon or equivalent to create copies of images of each partition and ordinary differential copies of the primary partition.

  I hope this will help other owners who have a hidden rescue for example partition. IBM and HP and would like to receive feedback.

  Finally, I must acknowledge assistance patient e-mail provided by Taisia Smirnova Paragon support by offering me this solution.

  best, Simonides

  (If you found this helpful please click on the star to give me a point Bravo!)

• Computer laptop Lenovo 3000 N200 that does not start as a system file is missing or damaged:

  «I have a laptop Lenovo 3000 N200 that won't start as "" Windows has no start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM "»»

  Rescue and Recovery Tools will allow me to restore the hard drive to factory settings, but I prefer to back up important data first. Rescue and recovery apparently allow backup and pays the appropriate folder / structure of files, but the "Start" option is grayed out.

  Then I tried to boot from Windows XP CD but it signals that it has no hard drive, although Rescue and Recovery can apparently go to folder/file structure.

  How can I move it please?

  Thank you very much - Simonides

  all sorted out now... see http://forums.lenovo.com/t5/Lenovo-3000-and-Value-line/Lenovo-3000-N200-can-t-access-Rescue-and-Reco...

• 3000 N200 system does not start

  Hello

  I have a 3000 N200 laptop since 2008. Despite his work both Kapersky and Norton, I got infected with malware Windows Security 2010 in summer. Malwarebytes did not work to get rid of, so I adjusted used rkill at the start to stop upwards. A couple of weeks, I got malware security tools. Now rkill wouldn't work. I tried to follow a manual online guide to remove. He suggested to abolish the EXEs with random numbers. I found one and did, but now the system will not boot to Windows. It goes to a screen with the Lenovo logo and a symbol of rescuer. What should I do? The screen is very nice but there is nothing to click on and no keys work to start any process.

  Maria.

  Turn off your computer and run it by pressing a button to retrieve key.

  then follow the instructions.

  WARNING: running windows own installation may delete any personal files on the c: volume, so I suggest you back up your data first. In addition, just in case where, under windows, run recovery & restore and burn recovery discs.

  You can find manuals here.

• Touchpad problems 3000 n200

  Hi all

  cannot scrolling with the touchpad. I have the 3000 n200 0769 EMG.

  I tried to install other synaptics drivers and even of dell but nothing works...

  some body have a solution?

  Thank you...

  Posted on exactly the same problem. (3000 N200 0769 ENG)

  But have not seen any solution yet, hope Lenovo release a new driver that works with these models.

• Lenovo 3000 N200 on the habit of power and shows no lights

  Hi all

  I have a Lenovo 3000 N200 laptop. One day he just off its autonomy while watching a video, and now shows no signs of life. Used to power on, no light when it is connected with a power supply, nothing.

  I tested the power supply and tried another new and get the same result. So I don't think that the battery/power supply is the issue.

  I have a feeling that it is something more serious, the laptop is out of warranty and IBMs fresh out of warranty are stupidly high. If anyone knows what could cause this problem and if it is possible to repair with a spare room (off ebay or elsewhere), I'm able to disassemble the laptop and replace a part.

  Thanks for any advice.

  Bass sounds.

  Some say remove memory and see if it gives an indication

  of life, like any beeps at startup.

  Try without battery, try to unplug it, remove the battery and press and hold the

  power button for 30 seconds and plug in again etc.

  Try to remove the hard drive, but this looks like a dead motherboard

  If you have any sign of life after trying everything you can think of.