3000 Y500 gets off after starting

Similar Questions

• iPhone 6s turns off after start upward with 30% of remaining battery

  6 s iPhone will turn off after starting with30% battery left please help

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• screen turns off after starting

  I have Windows XP Edition family service pack 3 computer desk Dell old to two years. Recently encountered a new problem. After starting OK, the screen of the monitor removed and remained empty after a few minutes (I don't have the time, but it seems to be not in hours minutes). The computer is "on" (I hear the fan), but nothing I could "wake up".  I found the monitor connection and cables were all OK. I could restart by closing with the power switch, power failure, wait a little while and then restart. System worked normally, monitor NSB OK for awhile... and then "deleted again" after a few minutes. To try to solve the problem, I restarted (see above) and then disabled 'power save' and 'Hibernate '; all energy and hibernation is DISABLED. The problem seems to have disappeared; While we're talking the computer stays on normally with normal display, etc. Assuming that the problem is actually related to register and/or hibernate, what I have to live with these features off? Other comments as to what is the problem? Thank you. Matt Sagal

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Step 1: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  Step 2: You can try to create a new power scheme and check what is happening.
  Reference: http://technet.microsoft.com/en-us/library/cc771632.aspx

• Acer 5742 screen turns off after starting

  Hi - looking for help from you guys please

  Got an acer 5742 running windows 7. All of a sudden the display has stopped working.

  It starts very well and the screen works to the point of "starting windows." I see the logo of windows for a bit, then it turns off.

  If I plug it into an external monitor, it works very well. In the chart properties, the screen is not yet listed (only external shows upwards). Help please!

  Hello...

  You can try to start your computer in safe mode by pressing the F8 key when you start your computer.

  If you can't login failure mode, connect the external display > from the Start menu, type Device Manager in the start search box and press enter.

  In the window Device Manager left click on the arrow next to "Graphics card", then right-click on the name of the display adapter and uninstall it. Watson computer to check if there is display after loading windows.

• Satellite Pro L650 turns off after start; DC In and Power LEDs blink on stop

  A friend Satellite Pro L650 having worked well until yesterday, all of a sudden turned itself off. Now, at startup, it lights up normally for about 10-15 seconds before turning off suddenly. Turned off, the DC in white/blue LED and the orange Power LED Flash on a broad set of intervals of approximately one second. This extinction happens if I leave Windows or press F2 to enter the BIOS setup.

  I guess this blinking is intended to serve as a kind of diagnostic code, but I have yet to track down what it means. Can anyone help?

  To avoid confusion, power without the product stack the same, sudden stop experience, except the two LEDs remain solidly lit this time. With or without battery, trying to turn on again immediately after that a shutdown produced no response at all. Remove the power cable and immediately it reconnect again and turn then produced a brutal power off, but in less than 5 seconds. More wait between attempts to market seems to give a little longer powered on State, but without fault, the machine turns off just suddenly. With its short time 'turned on' we are talking, there cannot be any kind of thermal protection?

  I had an old Satellite L450D lying around that uses coincidentally the same AC PA-1750 adapter, but use it made no difference. Of course, the battery does not have the L650!

  The only previous numbers, that I am aware of this machine have been intermittent case of Windows reporting "Plugged in, not charging", but as my friend use it exclusively on the network, it was not a problem.

  Your thoughts will be greatly appreciated...

  WTF?

  What is an unmoderated forum?

  Can someone help with my problem?

• Mouse Blue Wireless Mobile remains off after start now and not reactive.

  I used my MS 3500 wireless mobile mouse on the road on my Toshiba protégé 835p 94 for the first time and it worked fine. Got home, tried to use it again, the blue mouse fire came for a fraction of a second after turning the power button and stop completelywith the pointer does not respond. Off button and the new and the same thing. The indicator light on my site to the Computer stays on. I use a fresh AA Duracell, chechecked battery, battery replaced, turned on trhe button, blue light went on again for a split second and turns it off. I did it a couple of times thinking I might have a few unstable contact. Am I missing something?

  Hello

  Looks like the mouse has problems.

  Wireless Mobile Mouse 3500 - has a 3 year warranty.
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=019&active_tab=systemRequirements

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  These mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
  contact Microsoft at the number below.

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 for MS Hardware.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Locking num after start-up problems

  I started just my HP Pavilion 500-106eo today with windows 8.1. The problem is, that NUMLOCK is turned off after start and restart and the bios is set correctly on and in H - key is 2 (NumLock on after starting) I tried to stop fast start upward and it didn't work either. I can manually set NumLock on after starting... Help me to solve this problem, please.

  No, it did not help to cancel the quick start to the top, but the problem was OK and log on I have some numbers in my password, and I recognized that the numbers at the top of the keyboard works in the start up, and when I connected the digital newspaper is on...

• App gets paused / frozen just after start in gpu mode (audio continues to play)

  Hello
  You just bought a playbook!

  I have an existing Air application on android and iOS, I am now test it on playbook.

  With the rendering of the cpu, its normal, however when I put gpu in the descriptor of the app, the application stops all headphones rendering and the event just after starting the application, audio continues to play and the debugger remains connected.

  I am new on the playbook, I see there are power saving mode, maybe something is asleep?

  I tried:

  QNXApplication.qnxApplication.addEventListener(QNXSystemEvent.STANDBY, qnxStandby)
  
  internal function qnxStandby(e:QNXSystemEvent):void {
          trace("sent into standby ----------------------------------");
  }
  

  but nothing is ever attributed...

  The app works well on older iphones and android phones, I can't imagine I'm overloading the gpu.

  I use flash builder 4.6 and that's how I am structured:

  Pseudocode

  -addChild (loadingImage.png);

  -load game.swf

  -the addchild (game.swf) full,.

  -removeChild (loading image)

  When I load the main file game.swf, how it works, I get a few tracks, I can see it, but it's when he stops just of all activities and traces except audio.

  the swf so good, I can load this way using the cpu on the ok of the playbook, and I can load this way on android in cpu or gpu mode.

  Any help is really appreciated, thank you!

  -nick

  The problem was caused by the stage.quality example layout: stage.quality = StageQuality.LOW; This caused a freeze more often on the playbook. Being new the the playbook, when I read about the power API mode I thought what was related, but no, it was just a blocking of the application, where the debugger and audio arrives to stay connected and reading. hope this helps someone else.

• Can't get Firefox to start after OS updates

  Just did the latest updates on OS - X 10.6.8 and now I can't get Firefox to start. He stands up and says he has problems (the 'annoying' window) and that I should try to close tabs. However, it does not at all, so finally I have to force quit. I try cold start the computer without effect.

  We will try this. You said that you try to start Firefox 8 on the problem machine? Can you try to download Firefox www.getfirefox.com11, install it, restart your computer, and then see if it is still upward?

  If this is the case, try to start Firefox in safe mode.

• Tecra 9100 comes on intermittently and turns off after 10-15 seconds

  Referring to a Toshiba Tecra 9100, model No.: PT910E-602SF-FR

  The power button normally doesn't light up at all, even if sometimes it starts normally, starts to load windows, then always turns off after 5 to 15 seconds in any case.

  It always requires the batteries very well, but it won t turn on. I ve checked the ram, hard drive and I re - set the default bios - nothing prevents to cut if you can get it to turn on.

  Any ideas what could be the problem? Any help appreciated, it s the second time I had - the same problem the last time!

  Thank you

  Hey,.

  Have you already tried to clean the fan? Maybe a lot of dust blocking the fan for laptop can start t, and then turns off itself due to a higher temperature. It would be interesting to try to clean it.

  But in my opinion, you've done everything you can do, and it looks like a malfunction of the motherboard. If cleaning using fan doesn t I think the motherboard is faulty or something else. If you are familiar with the disassembly of the laptop, you can try to fix it yourself with second hand parts. Otherwise it s time for a new laptop I think

• T60 freezes when you move the trackpoint right after starting

  Hello

  I had this problem for quite a long time. Initially, I thought that it was due to an update to Windows XP, but I couldn't find any message on newspapers when the laptop crashes. I reinstalled XP many times to get rid of any incompatibility related to the software, but even with a new installation, it was happening.

  I realized recently after several tests that the problem occurred more frequently when you move the mouse (trackpoint or touchpad) just after the start of the system (cold start or start of hibernation). What I discovered is that this will happen is no longer if I suspend the laptop after starting the system, do not touch the mouse.

  The symptoms are that Windows freezes. No activity at all HD, the system responds to any keyboard and mouse input. If I close the lid of the portable computer system is not put into hibernation. The only way to regain normal operation is pressing the button for a few seconds, then the system turns off, and then turn on normally.

  All the drivers are up to date.

  Someone at - there experience this problem?

  Thank you

  Try to remove the battery... If the battery is dead, it could give you this problem...

• Im trying to get off the load free anti virus, but it does not work

  Im trying to get off the load free anti virus, but it does not work

  Im trying to get off the load free anti virus, but it does not work

  Not enough information.

  Of course - you send messages to a Microsoft support forum and one could assume that you mean that you try to download Microsoft Security Essentials, save it to your computer and install it then - but even with this hypothesis - another that knowing you have Windows XP (probably Home edition, but possibly professional or Media Center editions - and probably more than 32-bit not 64 - bit)-we do not like you think we should knowledge.

  Regarding AntiVirus - free are very good: Avira, AVG, Avast

  You could spend ~ 60USD during two years of eSET NOD32 AntiVirus (not more - just AntiVirus.)

  Get one - save on your computer (do not install immediately.)

  Reset...

  After a reboot - install your new product and update after the installation.

  Run a full scan with it.

  Then - just to make sure you started on the right foot...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Remove everything it finds.

  Reset.

• System does not boot up... message is... "" peripheral USB on the detected... current situation system turns off after 15 seconds.

  I recently bought a new golf gps device and connected to my desktop pc to register. After unplug his computer m USB cable I can't start my computer.

  whenever I start it the pc his usual routine, but then I saw the following message... USB device to the system detected. System turns off after 15 seconds.l

  Fifteen seconds after the system shuts down. It wiil also not afford to start or access the safe mode, the program installation or any other type of recovery mode, I could access normally. It will also not recognize my Win XP installation disc. I guess it's because of the configuration of the BIOS which accesses the hard drive before the CD rom drive.

  The problem was obviously created by the golf gps USB cable but I can't find a way to get the system to boot so I can find a way to eliminate the problem.

  Thanks for any help that anyone can provide. I am running WinXP Sp3

  Hi PAULARUNNELS,

  ·         What happens when you try to start in the Advanced startup options?

  ·         You receive the same error?

  ·         You external devices connected now?

  Try the following.

  Method 1: Disconnect external devices not essential, connected to the computer and restart the computer.

  Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer. Make sure that you have the CD drive set as first boot device. Check the settings by consulting the manual or call the manufacturer to do so.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Method 3: If you are unable to start on one of the advanced startup options, and then you can follow this article.

  How do I recover from a corrupted registry that prevents Windows XP startup

• After the upgrade from Office 2007 to Ofice 2010 on my Vista, then my computer turns off after being idle for a while.

  After upgrade Office 2007 to Office 2010 on my Vista, then my computer turns off after being idle for a while. When I turn on my computer, I get the splash screen indicating that Windows has finished unexpectedly and I would like to start in safe mode or normally (pluss a couple more choice...).

  Appears not to occur if there is activity going on--as if do me some work or have itunes playing music or I'm just surfing the internet. Curiously, it seems not to happen if I close Internet Explorer and Outlook.

  I shot all automatic updates for Windows Vista (32 bit) and Microsoft Office.

  Concerning

  B Odd Andersen

  Hi B Odd Andersen,

  I want to clarify if your computer seems to be sleeping or it completely closed after being idle for a while.

  Method 1: If the computer is in power saving mode, check if you can wake the computer from this State by moving the mouse or pressing any key on the keyboard.

  Method 2: Change the power to another and check to see if the problem persists
  Change, create, or delete a power plan (scheme)

  Method 3: check the logs in event viewer for more information on auto-off down

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Note: For your safety and security, it is not recommended to disable Windows Update.
  Activate the update or disable automatic

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer Toshiba laptop turns off after 3 seconds

  I can't understand what is happening with my computer, but I hope that this information will help you. Any ideas would be greatly appreciated.

  There are 3 computers involved. One is a Toshiba laptop Satellite L300D Vista I had in December 2008 and the other two are Toshiba Satellite M110 XP portable computers that we got in December 2006 I think.

  The problem started with the Vista. It stops just one day and when I tried to turn it back on, it would show the Toshiba screen for a few seconds and then die. He was the life of the battery. Tried everything, could not, so I have restored the default computer. After it's on, I loaded my music in my external hard drive and a few days later, he crashed again. I restored it again and load my music back in, and then a few days later, he crashed again. Now when I try to restore it, it does not accept the restore disc. The hard drive flashes orange several times and the disc not spin fast enough to start doing anything.

  I decided to forget the vista computer, I had a year and a half... And started using my xp computer is a few years old. I've ONLY used to browse Craigslist (after I started using it instead of my Vista computer for a few days, after that the Vista) and not load any music in there. This computer has worked since then, but about a week after the death of my vista, my xp now has the same problem. It turns on for a while and then turns off immediately. Since they are the two Toshibas, they can use the same chargers so I would use the charger that comes with the vista or another, that I got off eBay a few years ago. Been using two wires forever and then everything suddenly this question not sure that it of a problem with the power or not, but one thing I noticed was my vista computer would make a rattling noise from inside the computer only when has been plugged in the charger from eBay, and I noticed my xp making the same sound as that connected with the charger from eBay just before you die too.

  My brother also has a toshiba satellite m110 xp laptop, and we tried a few things with the vista computer to try to make it work. A site offered to take the RAM and try to turn it on. Nothing that's happened. We took the ram from my brothers computer which works very well and put it in the vista. Nothing happened. We took the hard drive from her computer and put it in the vista and the computer DID start up (which was great cause I've not seen on in about a month) but it started up to a blue screen. Put us the hard drive in my brothers xp and the computer was working fine... For a few hours. Now the computer will not start correctly and we are trying to restore his computer but couldn't find the restore disc. Her hard drive was in my computer literally 15 seconds and his computer is now toast.

  I don't care about my laptop toshiba satellite m110 xp, but I want a solution for my toshiba laptop satellite L300D vista, and I also want to get my brothers running again because I ruined. I don't know much about computers, but my guess is that there is nothing wrong with the ram or hard drives, but something else in my vista computer that is ruining the hard drives. That still doesn't explain why my XP computer is turn off after a few seconds suddenly well. The only thing that the Vista and my XP have in common, is that they used the same power cords (which always worked fine)

  If anyone can help me out or point me in the right direction, which
  would be AMAZING! Thank you very much for your time

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  If you have problems with the Toshiba recovery media, you will need to contact Toshiba.

  It's the Toshiba recovery process.

  Each manufacturer has their own particular recovery process.

  And as it is now failing to do recovery required, they would be the best people to contact about this.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And for XP questions:

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner