Acer 5742 screen turns off after starting

Similar Questions

• screen turns off after starting

  I have Windows XP Edition family service pack 3 computer desk Dell old to two years. Recently encountered a new problem. After starting OK, the screen of the monitor removed and remained empty after a few minutes (I don't have the time, but it seems to be not in hours minutes). The computer is "on" (I hear the fan), but nothing I could "wake up".  I found the monitor connection and cables were all OK. I could restart by closing with the power switch, power failure, wait a little while and then restart. System worked normally, monitor NSB OK for awhile... and then "deleted again" after a few minutes. To try to solve the problem, I restarted (see above) and then disabled 'power save' and 'Hibernate '; all energy and hibernation is DISABLED. The problem seems to have disappeared; While we're talking the computer stays on normally with normal display, etc. Assuming that the problem is actually related to register and/or hibernate, what I have to live with these features off? Other comments as to what is the problem? Thank you. Matt Sagal

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Step 1: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  Step 2: You can try to create a new power scheme and check what is happening.
  Reference: http://technet.microsoft.com/en-us/library/cc771632.aspx

• iPhone 6s turns off after start upward with 30% of remaining battery

  6 s iPhone will turn off after starting with30% battery left please help

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Inspiron 9300 screen turns off after the Windows Logo screen

  Inspiron 9300 my wife became severely infected.  I thought I had some weird things start popping up of the problem decided to wipe the hard drive and start over.  Unfortunately, I don't have to restore disks when I bought the computer.  I install windows xp pro service pack 2 full retail version.

  Installation was not a problem until I installed the driver ATI Mobility x 300.  I followed directions for installation from the website, do the installation of xp followed of the dell system software update followed of chipset followed video driver.  After that whenever I put on, the screen turns off after the Windows Logo.  The computer is still running and if I plug an external monitor everythng is fine.

  I tried all the troubleshooting tips I've seen in this forum.  I did a full install twice. made of safety boots (all right), started in VGA mode (works fine), I ran diagnostics from fn on startup, including express, extended and video tests and they pass all the controls.  I'm sure it's a software problem, but have been unable to solve.  I've updated the ATI bios although when I run it says already installed and done one installs x 300 driver on 6 ttimes own.

  I know it must be something simple that I'm missing. My system is the Inspiron 9300 with 2 GB of ram and the mobility x 300 card.  Any help would be appreciated.

  
  

• LCD screen turns off after a few minutes

  My screen turns off after a few minutes, even if the parameters to be able to say that he should turn off after 60 minutes of no activity.  Before this date should activate the screensaver after 10 minutes of no activity.  But in my case the active screensaver ever and my right monitor fades to black.  What can I do to fix this?  Is there a registry setting that has changed I don't know?

  -penciline

  I checked power options, the first thing, and then I checked the (NVIDIA) graphics card Control Panel to see if there is a setting for it.  The figures that I had in my previous post came from my power options, but I don't know how standard power who do not have the numbers that it would affect the schedule/performance options.  I went to advanced settings.  But I also rebooted my computer which solved the problem, in my opinion.  I'll have to sit and wait to be sure, but I'll get back to you on that once I have test.

  -penciline

• Monitor may not turn off after setting the screen turns off after a period of inactivity

  Original title: control screen does not turn off

  My cell phone 6 year old runs today to Win XP Pro and IE7 and Firefox. My screen has been set to turn off after 15 minutes, but these days he keeps any. It stays ON all day.

  Attempted to solve by setting to turn off in 10 minutes, but it makes no difference, what could be the problem?

  TIA

  First of all, you don't want to do the hardware updates through the Microsoft Update Website.

  Secondly, there are a couple ways you can do this:

  1. go in the Device Manager (start > Control Panel > administrative tools > computer management > Device Manager).    tedious, but this way you are sure.

  Double-click each item, having developed each sign, select the driver tab and choose Update driver, let windows search automatically, make sure that you are connected to the internet.  Do this for each item that you want to search for updated drivers.

  2. go in the manufacturer's website. For example, I use a Dell Dimension and move the driver Dell downloads Web site.

  If you mean hardware upgrade from Microsoft (not Windows which is software) you would search Microsoft.com site for driver downloads.

  Hope this helps, after back with your results, please.

• Latitude D610 screen turns off after the Windows XP loading screen

  I'm having a problem with my Latitude D610 where after the Windows XP loading screen, the screen turns off completely. No BSOD, no login screen, just a white screen. This started happening at least a year, however, I bought a new computer if it is passed to the hatch. I tried the system restore when it appeared first without success. The computer starts in Mode safe. Any suggestions?

  If it starts in mode without failure, then its almost certainly a driver and with the blank screen problem, I suspect a display driver.

• Satellite A100-812: screen brightness does not not & screen turns off after a while

  Some power management features do not work after a bios update (5.90).
  The display brightness can be changed in the power manager, or the top menu system. In the power manager, the cursor can be moved, but the brightness is not set. Toshiba menu system appears to hang on trying to change the brightness with F6 - F7 and won't move the cursor.

  In addition, the screen does not turn off after the set amount of minutes in the power manager.

  What is going on? How can this be repaired?
  Thanks in advance.

  Hello

  Some questions; Why you have updated the BIOS?
  Are you sure you used the right BIOS?

  In my opinion you shouldn't t to update anything if the laptop works properly!

  However, try to access the BIOS, set the default settings and save the settings before exiting the BIOS.
  If this does not help, I would pick up the laptop with the Toshiba Recovery CD.

  Good bye

• Y450 screen turns off after 5 minutes, set to never power settings

  The display on my Y450 turns off after 5 minutes if it is connected or not. I changed the power settings on all levels of the power to never turn off the display, but he keeps doing. I thought that maybe it had something to do with windows is not fully updated so I did it earlier today, but it has not changed. It doesn't matter whether the system is energy saving, balanced or a custom.

  I don't know what to do to stop it, but it's annoying when I play videos and turn the screen on every 5 minutes. Is there another program I'm missing that somehow overrides the power settings?

  You may also need to change the power settings for the windows power management and lenovo power management.

  We also know, that the problem persists only watch movies?

• Satellite M200 screen turns off after that start & battery does not charge

  Hello, I am from Jakarta, Indonesia
  I have a problem with my Toshiba Satellite M200 Notebook (running Windows 7 Home Premium)

  After I press the power button to the top of my laptop, it works fine display BIOS and Windows startup screen.
  but after that my monitor off all of a sudden when Windows is supposed to show the login screen.

  Sometimes, the monitor doesn't turn off, but shows a lower resolution (I don't know exactly what resolution, 1024 x 768 or 800 x 600, i use maybe 1280 x 800)
  so the only thing I can do is, press the power button to stop bad then press power again turns on, my monitor works normally
  try to stop and then turn on again in a few hours later, problems still comes once.

  from the moment where I install Windows 7, I use 8.15.10.1930 version of the driver (downloaded from Download Center of Intel, which included Assistant TV Intel)
  2 days ago, my friend told me that I should install the driver from the Toshiba site support, so I went to csd.toshiba.com and download the 8.15.10.1825 version of this site (which is not included Assistant TV Intel)

  my monitor works normally after I installed the driver I of csd.toshiba.com, so I think that the problem because the Intel TV Wizard somehow messed with my laptop. But this morning this problem once again, my turns just monitor suddenly...

  In addition, this problem seems to be my battery was unable to recharge, my completely reloaded Windows shows, but when I plugged my AC adapter,
  There are 15-20 minutes before my laptop turns off automatically

  Three months ago, I just brought my laptop to the local Service Center of Toshiba and bought the new motherboard to replace my old mobo (which have a VGA problem too!)
  Is there something I can do (related to Windows or driver/software) or I can bring my notebook at the center of service again?
  are they somehow an incorrect wiring when replacing my motherboard?
  and am I need to replace my battery too?

  I use this laptop for about a year and a half and there is nothing wrong with my battery before replacing the motherboard

  any help would be appreciated :D

  Hello

  Talk about your screen, the a graphics driver causes this malfunction with resolution and turn off. Go to the page of the toshiba driver and download the correct Vga driver for your model. I see, you are running Windows 7, if there is no driver for win7, try the vista driver.
  On your power supply, you have used for the year and a half and he is released in 20 minutes, there is nothing strange. It's standard for power supply operating period, need to be replaced. Just to be sure, you can check with a new battery. You will see that the trick works as expected.

  Welcome them

• My screen saver turns off and the screen turns off after 2 minutes or more. How to set time, the screen saver comes on?

  ? is explicit

  Maybe in the standby power options, after a period of inactivity. (Windows) Start > settings > Control Panel > power, the "Turn Off monitor" value Options a certain amount of time or 'never '.

  Other issues requiring your attention

  The information provided with your question indicates you have outdated plugins with known security and stability issues that need to be updated. To see the plugins submitted with your question, click on "+ system details...". "to the right of your original message of the question.

  • Adobe PDF plugin for Firefox and Netscape
    • New Adobe Reader X (version 10) with protected Mode just came out 2010-11-19
    • See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
  • Shockwave Flash 10.1 r53
  • Next-generation Java plug-in 1.6.0_17 for Mozilla browsers
  1. Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
  • Open the Adobe Reader program in your list of programs
  • Click Help > check for updates
  • Follow the instructions to update
  • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
• Download the full installer (If you have NOT installed Adobe Reader):
  • "Use the links below in order to avoid the painful' getplus" Adobe Download Manager and other 'extras' you do not want
  • Use Firefox to download and SAVE the installer to your hard drive for the appropriate link below
  • Click "save to file"; Save to your desktop (so you can find it)
  • Once the download is complete, close Firefox
  • Click on the installation program, you just downloaded and allow installation to continue
    • Note: Vista and Win7 users need to right click on the installer and choose "Run as Administrator"
  • Download link: ftp://ftp.adobe.com/pub/adobe/reader/
    • Choose your operating system
    • Choose the latest version of # .x (example 9.x for version 9)
    • Choose the version the most recent number
      • NOTE: 10.x is the new Adobe Reader X (Windows and Mac only from this announcement)
    • Choose your language
    • Download the file
    • Windows: click on the .exe file. Mac: click on the .dmg file
• Using one of the links below will force you to install the "getPlus" Adobe Download Manager
. Also don't forget to uncheck the McAfee scanner if you do not want the link force installed on your desktop computer
• See also the download link': http://get.adobe.com/reader/otherversions/
• See also: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for download, you can get the painful 'getplus' Manager to download from Adobe (Adobe DLM) and other "extras")
• After installation, launch Firefox and recheck your version.
• Update the Flash plugin to the latest version.
  • Download and SAVE to your desktop, so you can find the Setup program later
  • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
  • Once the download is complete, exit Firefox
  • Click on the installer, you just download and install
    • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
  • Launch Firefox and recheck your version or up to the download link below to test the installation
  • Download and information: http://www.adobe.com/software/flash/about/
    • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
    • Use IE to go to the site above to update the ActiveX to IE
  • Download manual installers. Note the separate links for:
    • Plugin for Firefox and most other browsers
    • ActiveX for IE
• Update the Java plugin to the latest version.
  • Download site: http://java.sun.com/javase/downloads/index.jsp (Java platform: download JRE)
  • See also "manual update" in this article: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
  • Removal of older versions (if required): http://www.java.com/en/download/faq/remove_olderversions.xml
  • Remove several extensions of Console Java (if required): http://kb.mozillazine.org
  • Java test: http://www.java.com/en/download/help/testvm.xml

• Screen turns off after the opening of the session. The mouse cursor only appears

  Don't know where to post this, but here's my problem.

  I have a Dell laptop with VISTA professional who has worked perfect for 8-9 months. Since the beginning of December I started having this problem haunting log-in where to provide the user name and password, the screen turns white (black) and I see is a mouse cursor. Nothing else appears. I can get to the hostel Monsignor task by doing a Ctrl-Alt-Delete, but a stop or restart is not the problem. I tried the safe mode or VGA mode without result. The only thing that seems to work is time. If I leave the system at the prompt to logon for 5-10 minutes, I can then connect you ok but this delay is unacceptable. It's as if there is a service that needs timeout? Any ideas on what may cause this behavior?

  The behavior is also described by others here and here but none of the suggestions have solved the problem for me.

  Appreciate any help. Thank you!

  -Jetland

  You wanted to let you know the final outcome of this problem. I spent two good months of fighting through this problem and try all of the advice given. The problems have persisted. Beyond the suggestions here, there are pages on Google pages on this topic is delicate balancing sifting through the "answers".  So far, no one, including Microsoft, has been able to identify the problem or to locate a formal resolution. After having satisfied this during a road trip in 2 weeks, I have downgraded to Windows XP and wait anxiously for the release of Windows 7.

  -Jetland

• After the update automatic, could not load desktop under the screen turns off after logon

  Original title: computer running Windows 8 will not correctly restart after automatic updates & close

  I have Windows 8 my computer does not start correctly after it has automatically closed for the automatic updates last night. When I turn on the computer I can connect as user, however once I do it says welcome and the screen turns white. The only thing visible is the cursor if I move the mouse. There is no Apps and I can't get to my desk or anything else. I tried to restart again and press F8 and nothing. However, I can bring up the Task Manager, but that's all. Help, please.

  Hi Patricia,

  I understand that you get a black screen after that it was closed automatically for automatic updates. It might be difficult when things don't work the way it should be on your computer. This problem might have occurred because of the conflicted with the system files update or could be a problem with the display card drivers may be due to the virus/malware infection.

  Many users complain about the issue with a black screen to logon Windows. Microsoft has not yet determined the exact cause of this problem.

  However; I suggest you to please follow the steps suggested by Scott Atk began August 30, 2014 in the following link and check if this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

  Please answer us on the State of the question to help you further.

• Satellite Pro L650 turns off after start; DC In and Power LEDs blink on stop

  A friend Satellite Pro L650 having worked well until yesterday, all of a sudden turned itself off. Now, at startup, it lights up normally for about 10-15 seconds before turning off suddenly. Turned off, the DC in white/blue LED and the orange Power LED Flash on a broad set of intervals of approximately one second. This extinction happens if I leave Windows or press F2 to enter the BIOS setup.

  I guess this blinking is intended to serve as a kind of diagnostic code, but I have yet to track down what it means. Can anyone help?

  To avoid confusion, power without the product stack the same, sudden stop experience, except the two LEDs remain solidly lit this time. With or without battery, trying to turn on again immediately after that a shutdown produced no response at all. Remove the power cable and immediately it reconnect again and turn then produced a brutal power off, but in less than 5 seconds. More wait between attempts to market seems to give a little longer powered on State, but without fault, the machine turns off just suddenly. With its short time 'turned on' we are talking, there cannot be any kind of thermal protection?

  I had an old Satellite L450D lying around that uses coincidentally the same AC PA-1750 adapter, but use it made no difference. Of course, the battery does not have the L650!

  The only previous numbers, that I am aware of this machine have been intermittent case of Windows reporting "Plugged in, not charging", but as my friend use it exclusively on the network, it was not a problem.

  Your thoughts will be greatly appreciated...

  WTF?

  What is an unmoderated forum?

  Can someone help with my problem?

• Re: satellite A300 screen turns off after the toshiba logo, will not boot from the CD/DVD

  Hello, I have this problem with Toshiba satellite A300.

  I deleted several files and folders of my drives C and E. To restart the computer, it only shows the Toshiba logo then a slightly gray white screen on a thorough inspection. Whenever I press CRL + ALT + DELETE, the computer restarts and behaves in the same way.

  I tried to use an external monitor, but there is no difference. The tent to start using a CD/DVD, same behaviour occurs, it does not start and screen remains blank after the Toshiba logo, I tried even to change g the order of boot, but in vain.

  What could happen?
  Thanks in advance.

  Hello

  It seems that you deleted system files and Windows no longer starts. Have you tried to restore the disk image factory settings or hard drive recovery? Or do copy the Windows installation... It is easier to reinstall rather fix the problem.