30EA2 - No. databases available at the stage of Capture with the MS Access Migration

Similar Questions

• public page is not available to the public - access instead of the error.

  I have a work request. actually, I have the same copy of the work plan WITH SSO application and the other using the scheme of authentication and authorization of apex. Both work very well. With the exception of the logout page. I create a page(#62), without tab. Just a simple HTML form that has a disconnect message. I do the authentication of the page the value "Page is public" and save. I did this (try to diag) in two of these applications and in 2 different installations of the apex.
  
  However, when I'm not connected in the app, and I'm on this page, I get an "error: access denied by Application security control" message.
  
  I'm just trying to go to the URL http://xxxxxxx:8090/apex/f direct? p = 110:62:0:, or just http://xxxxxxx:8090/apex/f? p = 110:62 (page 62 is the page I created and defined as public.)
  
  It is in the apex 4.1.1. I think it should be very obvious as to why it does not, however, I'm puzzled.
  
  Thanks in advance.

  Hey 12602240 - the problem I think you touch is not at the level of the page but on your level of app. If you go to the properties of the application, it seems that you have a system of authorisation required at the level of the app. If the page you are trying to do is after they log out, you may need to allow ANYONE to access your application to get the public pages (or take off clearance at the level of the app).

  Rgds/Mark M.

• I have to add new contacts in the database. Should what stage of treatment I add?

  I have to add new contacts to the database. Should what stage of treatment I add?

  Hello

  Please use "Save to the Contact Table" stage of treatment.

  Thank you

  edynamic Experts Eloqua

• Remove a database option is not available in the wizard DBCA

  Hello
  
  I have 11v3 of HP - UX. I installed Oracle Standard Edition 10.2.0.1 and after that, I installed 10.2.0.4 Patch Set.
  I configured the two databases using DBCA. At the end I save scripts (not create database) and run the shell script.
  The databases are running.
  
  I tried to delete a database using DBCA, but option delete a database (and also "set up the Option database") are not available, they are grey.
  
  What is the problem? What should I do to get the opportunity to delte the two DBCA databases?
  
  Kind regards
  Lovro

  Pavli wrote:
  Hello

  I have 11v3 of HP - UX. I installed Oracle Standard Edition 10.2.0.1 and after that, I installed 10.2.0.4 Patch Set.
  I configured the two databases using DBCA. At the end I save scripts (not create database) and run the shell script.
  The databases are running.

  I tried to delete a database using DBCA, but option delete a database (and also "set up the Option database") are not available, they are grey.

  What is the problem? What should I do to get the opportunity to delte the two DBCA databases?

  Kind regards
  Lovro

  DBCA reads the ORATAB UNIX file to determine which databases exist to be deleted (and DBUA did the same thing to determine which databases are to be upgraded). Most likely the ORATAB file contains no entry without comment for your database.

  Niall Litchfield
  http://www.orawin.info/

• Titans of chess not available in the vistahome database edition?

  When I bought vista home basic, I was reassured that 10 games would come to my vista home basic edition and was later police than when the SP-1 is released and automatically installed on my computer that SP-1 was shipped containing 10 (inclusive of 'chess titans') games - my Home Basic edition contains only 6 (? six) games

  howard64,
  I'm sorry that your were ill-informed but Chess Titans is not on Vista Home Basic.  With Vista, there are 3 bonus games that were available on the versions supported Windows Aero graphics.  This link mentions that these games are available with the Home Premium version: http://www.microsoft.com/windows/windows-vista/compare-editions/home-premium.aspx

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• deleted table showing nt available in the database

  Dear friends,
  
  my database is running in mode newspaper archive and I dropped a table say table1.i ran the RMAN command below
  
  RMAN > run
  2 > {}
  3 > restore database;
  4 > restore database;
  {5 >}
  
  in the above command we restore from backup and applying all archivelogs, m I right?.
  After the restoration and recovery of the database by using the RMAN command above, when I checked the deleted table table1, I m getting error - table1 does not already exist in the database.
  can you please tell me why, after restoring and applying all archivelog why I have not dropped the table?
  
  OS-linux rhel 5.7
  DB - 10.2.0.3

  Mihael I m still confused because why the fall did not return after executing a full recovery of the database using the RMAN commands shown below

  RUN
  {
  RESTORE THE DATABASE;
  RECOVER THE DATABASE;
  }
  can you explain please?

  complete recovery means apply all changes to the database, including the fall of the table

• HP Workspace: What plan options are available for the HP workspace?

  Hey everybody,

  Plan options are available for the HP workspace?

  Thank you

  Bill

  HP workspace is a service of application with the application testing virtualization and delivery provided trained HP Workspace Service Desk officers lighten the load for a client by THIS group. HP workspace is available in two service options - essential and Premium.

  Essential is a great solution for organizations that have the most mobile that need to be in "desktop mode" using Windows or the Web for business applications of less than a few hours a day. Premium provides additional virtualized applications, more cloud computing power and overtime for the users who need to use applications in desktop mode more frequently. With each service, there is an integration of VPN service option (sold separately). The VPN service allows a secure access to data and databases behind the corporate firewall.

  Plan options HP workspace at a glance:

  	Essential	Premium	The Service module
  Monthly usage (per user)	40 hours	80 hours	integration of VPN 1 year
  Cloud (per user), the processing power	VCPU dedicated	VCPU dedicated	Licensure is through gateway VPN - no per user
  RAM to the virtual machine (per user)	4 GB OF RAM	8 GB RAM
  Virtualized applications	≤10	Unlimited
  The application analytics	—	Detailed usage reports
  Support	Incident and Monday to Friday deployment support[1]	Mon - Fri deployment and incident support.7

• With EM data masking and other utilities of security features available within the DB package

  Hello

  Please let me know your experience of the difference between EM data masking Pack and other security elements such as writing, available in the database Vault.

  Kind regards

  VN

  Hide data are used when you have to clone the database of production for developers. Its purpose is to sensitive data mask in the clone database and you can use several formats of masking (numbers random, random strings, shuffle of data, etc.).

  The masking process is irreversible. (http://docs.oracle.com/cd/E11882_01/server.112/e41481/tdm_data_masking.htm#RATUG04000)

  Writing of data (http://docs.oracle.com/cd/E11882_01/network.112/e40393/redaction.htm#ASOAG596)

  "Starting Oracle 11 g Release 2 (11.2.0.4) database, Oracle data writing allows you to hide (delete) data that are queried by applications or limited users." Drafting occurs in real-time when users query the data. Drafting of data Oracle is part of the Oracle Advanced security features. »

  In a nutshell, you create a policy of writing for a table using DBMS_REDACT package that will redact (mask) data for some users - depending on your political - select.

  For example, a group of users will not be able to view credit card numbers (1234 5678 1235 5690-> * * * 5690). Please note that the data are not hidden within the table.

  Database Vault is used to restrict powerful users (users with system privileges) to access some objects (and not only). Please see the DEMO on this link ( Oracle Database Vault |) Oracle database | (Oracle ) "

  • Oracle Database Vault (03:13)

• ORA-27063: number of bytes read or written is incorrect, no space available on the device (DB went down due to no space for the temporary file)

  Hi all

  Recently, we encountered a non usual problem with restarting the database because of the ORA-27063

  number of bytes read or written is

  incorrect #IBM AIX RISC System/6000 error: 28: no space is available on the device.

  Database version: 11.2.0.4

  Type of system: SAP database

  Computer type: AIX

  When the investigation we found the full systems 100% file where resided temporary files. So to solve it, we simply added tempfiles on other file systems.

  My question is why the db restarted. As far as I know the TEMP tablespace will throw an error (unable to extend TEMP of 128 segment in tablespace TEMP) every time that

  There is no free space.

  Secondly, to avoid the above, that we began to find the TEMP files from file systems and if found 90% and above then began adding space on all the production servers to avoid

  reoccurance of this issue. Is - this recommended...?

  Thank you

  Hello

  It can be consider as an alternative (using a cron task) or if you watch in em12c could control, so you can host some metrics to check temp space.

  Now, one last thing to consider, it is not advisable to go to increase temp (to be honest, we need optimize queries, why won't they are eating take so much space)

  Third step, you can put a profile (limit) so much space is used, then kill the session so that they eat no place (so that db will not get crashed at least... only session will be started - we can very well with that, instead of hammering db)

  -Pavan Kumar N

• Not available for the 11.2.0.2.0 SUPPRESSTRIGGERS?

  I want to delete triggers in my replicat, so I try the following in my settings:

  replicat myRepl

  assumetargetdefs

  dbOptions deferrefconst suppresstriggers

  username myUser, password myPw

  card schema_1.*, target schema_2.*;

  But the replicate does not start, and I get the following in the ggserr.log:

  ERROR OGG - 017646 Oracle GoldenGate for Oracle delivery, myrepl.prm: support for the suppresstriggers parameter is not available in the version of RDBMS you're using.

  If I remove the suppresstriggers, the replicat starts.  According to the reference Guide:

  "... You can use this setting for Oracle 10.2.0.5 and later patches for Oracle 11.2.0.2 and later, instead of manually disable triggers. To use this option, replicate user must be an administrator Oracle Streams, which can be granted by calling dbms_goldengate_auth.grant_admin_privilege. The default value is NOSUPPRESSTRIGGERS. »

  I ran the dbms_goldengate_auth.grant_admin_privilege.  In fact, I tried to grant all privileges, but still no luck.

  I'm using the version of Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit on SunOS 5.10 on sparc sun4v

  I'm under Oracle GoldenGate version 11.2.1.0.3

  Can anyone provide any indication as to why I can't include the suppresstriggers in my replicat?  Can someone tell me how to disable the triggers can be handled differently?

  Thanks in advance for any info!

  Yes. You are right. I do not see properly. One more possible reason, that I could find is that you mention the SUPPRESSTRIGGERS option after DBLOGIN.  So try using this settings replicate file.

  replicat myRepl

  username myUser, password myPw

  assumetargetdefs

  dbOptions deferrefconst suppresstriggers

  card schema_1.*, target schema_2.*;

• The o/s message: no space is available on the device

  Oracle 10.2.0.4, Solaris 10 x 86
  
  In SqlPlus, I run a script that runs different tasks such as inserts, updates, you recreate synonyms. The script ends abruptly with an error o/s Message: no space is available on the device:

  SQL> CREATE OR REPLACE SYNONYM myuser.tablename FOR tablename;
  
  Synonym created.
  
  Elapsed: 00:00:00.00
  SQL>
  SQL> O/S Message: No space left on device
  Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  bash-3.00$

  It is an extract of the execution of the script - the last CREATE statement and the following error.
  
  I googled for that and according to the different posts, I tried to increase the values in/etc/system file this way:
  

  set shmsys:shminfo_shmmax=4294967295
  
  set shmsys:shminfo_shmmin=1
  
  set shmsys:shminfo_shmmni=100
  
  set shmsys:shminfo_shmseg=10
  
  set semsys:seminfo_semmns=32000
  
  set semsys:seminfo_semmsl=256
  
  set semsys:seminfo_semmni=128
  
  set semsys:seminfo_semvmx=32767
  
  set noexec_user_stack=1

  The I also tried to change the project to the oracle of the user of the operating system, and now it looks like this:
  

  group.dba
          projid : 100
          comment: "Project for oracle os user and members of dba group"
          users  : (none)
          groups : (none)
          attribs: project.max-msg-ids=(priv,256,deny)
                   project.max-sem-ids=(priv,100,deny)
                   project.max-sem-nsems-ids=(priv,256,deny)
                   project.max-shm-ids=(priv,100,deny)
                   project.max-shm-memory=(priv,4294967295,deny)

  However, when I restarted the sqlplus script I still end up with the same message o/s: no space is available on the device.
  
  It's the output of the df - h command:
  

  ash-3.00$ df -h
  Filesystem             size   used  avail capacity  Mounted on
  /dev/dsk/c0d0s0         17G   8.4G   8.1G    51%    /
  /devices                 0K     0K     0K     0%    /devices
  ctfs                     0K     0K     0K     0%    /system/contract
  proc                     0K     0K     0K     0%    /proc
  mnttab                   0K     0K     0K     0%    /etc/mnttab
  swap                   959M   992K   958M     1%    /etc/svc/volatile
  objfs                    0K     0K     0K     0%    /system/object
  sharefs                  0K     0K     0K     0%    /etc/dfs/sharetab
  /usr/lib/libc/libc_hwcap1.so.1
                          17G   8.4G   8.1G    51%    /lib/libc.so.1
  fd                       0K     0K     0K     0%    /dev/fd
  swap                   959M    76K   958M     1%    /tmp
  swap                   958M    44K   958M     1%    /var/run
  /dev/dsk/c0d0s7        6.9G   6.8G     0K   100%    /export/home
  /hgfs                   16G   4.0M    16G     1%    /hgfs
  /tmp/VMwareDnD           0K     0K     0K     0%    /var/run/vmblock

  What needs to be fixed here? Thank you very much!

  / Dev/dsk/c0d0s7 filesystem appears full. You must watch your file alert.log, it tell you where is the problem.

  HTH
  Antonio NAVARRO

• How to save a database to use the RMAN catalog using the OEM 11 g grid

  How to save a database to use the RMAN catalog using the OEM 11 g grid?
  
  ---------------------------------------------------------------------
  Enterprise Manager Version: 11.2.0.2

  See the availability tab, and then click 'Recovery catalog settings' under the Backup/Restore Configuration.

  Choose the option 'Use Recovery Catalog'. Click the 'Add Recovery Catalog' button to add the recovery catalog. And fill required fields like username, host, port, sid, etc..

  Talip Hakan Öztürk
  http://taliphakanozturken.WordPress.com/

• Could not power on VM: no space is available on the device: cannot power on the virtual machine.

  VMware esx ei, 3.5.0 123629

  Physical memory: 64 GB

  Hard drive: 1.63 TB

  7 virtual machines. 5 of them are configured with 4 GB memory and 2 of them with 2 GB of memory. I am able to power on 3 virtual machines with 4 GB of memory.

  When I try to turn on 4th VM with 2 GB of memory, I get this error message "could not power on VM: no space is available on the device: cannot power on VM.»

  I would like to know if this is the limitation of the ESX Server? How should I size the memory for VMS if I want to run every 7 virtual machines to the

  Moreover, given that I have 64 GB of physical memory. Is there documentation that provides a report of the maximum allowed memory configurable

  compared to the virtual memory?

  Thank you

  Ganesh.

  Ganesh,

  Memory reservations are defined based on VM by VM.

  You can allocate more memory to the virtual machines you have in your host (it's not really a good idea to go crazy with the overcommitment of memory, but some level of excessive pressure is used in general).  Memory applied to your VM resources are shares, bookings and VMkernel Swap limits.

  Just to illustrate:

  You allocate 8 GB memory to a virtual computer.  If you take all the parameters by default, ESX will allot a 8 GB VMkernel Swap file in the base directory of your VM (it will have the extension ".vswp") this VMkernel Swap file is a safety net.  Your virtual machine, at this stage, can consume up to 8 GB of memory If physics is available from the host.  If the memory of your host is overcommitted, some of the available memory 8 GB could be allocated on 8 GB VMkernel Swap file.

  If you set a reserve of memory - 2 GB - this means that the vmkernel will still award the first 2 GB of memory used by the virtual machine to the physical memory.  This is not means that the 2 GB of memory reserved is carved off the coast and completely dedicated to the virtual machine.  This means that the vmkernel offers up to 2 GB of RAM to the VM when and if she needs to use it.  It is a guarantee that the memory will be available upon request.  Because of this guarantee of the VMkernel, VMkernel swap file only has to make sure that the 6 GB memory is satisfied (4 GB total less the 2 GB reserved), so the VMkernel Swap file is only 6 GB in size.

  Actions are a mechanism for prioritization and limits are a cap on physical memory ever allocated to the VM.

  You can set up any number of memory for the virtual machines that you want - frankly, overcommitment of memory for ESX is a very good thing, but you must be vigilant about watching your systems if approve you.  If you have 64 GB of RAM, and you only configure your virtual machines to use total 32G, then you lose 32 GB of RAM.  If you allocate, say, 96 GB of RAM (total) to your virtual machines, then you look at a 50% overcommitment.  What to watch in overcommitting memory is application performance (and more importantly - perception of the user of this performance) and also the memory ballooning and VMkernel Swapping activity.  Those who can both will be in graphics performance in VirtualCenter.  I would recommend reading the Guide to management resources for more details.

  Hope that provides an overview.

  Thank you

  -jk

• Using the database link in the applications

  Hello
  I just configured and created a PUBLIC database link on my oracle 10g. Can I use it with success of sqlplus do some like select simple:
  
  "SQL > select * from table"@dblink ".
  
  The query returns the result as expected.
  
  Now, I would like to use this public link in my applications, but the problem is that the link seems to be only available in the SYS schema.
  
  Ho can I access to a schema?
  
  In other words, to do some select (and insert) of my applications APEX by using the link to the db. If I try to select said, all I get is
  
  ORA-02019: description of the connection to the remote database not found

  OK, thanks all for the help, I found the problem.
  It seems that I created the link of database public and not public.

  I gave both of them and re - create public database link and now it works.

  Thanks for the help.

• Cannot start the database because of the archivelogs

  We use Oracle 11 g R2.
  
  We put the archivelogs on June 1, 2011. The archivelogs took all the space available on the server, so we got the error:
  Status: Opened but not available
  Details: Archive is unable to archive a redo log because the output device is full or inaccessible. The instance is open.
  
  I backed up the archives and remove them from the flash_recovery_area.
  
  Still, the database does not start. I had to stop immediately, but I can't connect through OEM or sqlplus.
  
  SQLPLUS was told that shutdown is not yet complete.
  
  OEM say status is wound down, but when I do a startup, I get this
  
  SQL > connect to an idle instance.
  SQL > SQL > ORA-01012: not connected
  Disconnected
  
  
  Can anyone help? It is urgent. There are many applications that run on the database.

  Elsie says:
  We use Oracle 11 g R2.

  We put the archivelogs on June 1, 2011. The archivelogs took all the space available on the server, so we got the error:
  Status: Opened but not available
  Details: Archive is unable to archive a redo log because the output device is full or inaccessible. The instance is open.

  I backed up the archives and remove them from the flash_recovery_area.

  Still, the database does not start. I had to stop immediately, but I can't connect through OEM or sqlplus.

  SQLPLUS was told that shutdown is not yet complete.

  OEM say status is wound down, but when I do a startup, I get this

  SQL > connect to an idle instance.
  SQL > SQL > ORA-01012: not connected
  Disconnected

  Can anyone help? It is urgent. There are many applications that run on the database.

  If you have removed the archivelogs at the operating system level, this fact was not in the rman catalog in the control file.

  c:> rman target /
  rman> crosscheck archivelog all;
  rman> delete noprompt expired archivelog all;
  

  And now you have remove these logs if you don't back them up you are sunk. Take a full backup immediately.

  Then put in your backup rman script commands to the archivelogs backup and remove them after that that they are saved. The details are in the documents to tahiti.oracle.com

  BTW, this is a community of volunteers. If you have "urgent" that you will need to open a SR with oracle and deal with people who are paid to deal with "emergency".