3110cn - lack of Duplex in the printing preferences for some users

Similar Questions

• Stop the weekly reports for some users

  We have a few clients asking not to receive weekly reports of the site which are emailed to.

  How decide you who did and didn't receive these reports?

  Thank you

  Hi Paul,.

  All users can disable weekly reports under my details. For all users, they are enabled by default.

  See you soon,.

  -mario

• Block the new Application for some users

  Hello

  I want to have a few u'use' which can not create a new application,

  I already changed the roles of this view, but new applications icon still appears.

  How to get to it?

  Short 3.0.

  Thank you!!

  EBrauerP

  In 3.0 all users can create applications. This was addressed in point 3.1, where users do not have the power user role cannot create applications.

  I think that the best you can do is restrict access to data. So if you have data sources configured on the Data Sources page, you can update the configuration so that only specific users or roles can use this data to create a new application.

  Limit who can connect to an application to the data source

  Then other users can create applications by downloading their own spreadsheets.

• Reset the printing preferences

  Is there a reason to print now remembers the printing preferences (in particular, the number of copies) made during printing?  I now fear an increase in my number of printed copies.  He ALWAYS remembers it now.  If any time I print 20 copies, the next time I use the printer instead of print 1 copy by default, it reminds the number 20.  I lost so much paper and ink and grabbed coffee and return to find 20 copies instead of 1.  This never happened to me before only started very recently.

  You can always pause or cancel a print job. He doesn't have to run to its conclusion.

  In any case, try this.

  Go to System Preferences > printers and Scanners > right click on the printer in the left sidebar and select this option to reset Printing System.

• How can I configure the printer preferences and not just margins, etc.

  The default setting for my printer is A5 (8.5X5.5' and every time when you print a page (document) of Firefox, I have to set the printer to letter-size preferences and which tray to print.) Is there a way for me have Firefox do for me?

  Thanks, uncle Dewey

  From topic: config
  
  It's preference that tells Firefox saves the last modification of the settings.
  
  Print save_print_settings = True - (by default): save the print settings after each print job

  This setting has to be changed in about:config if you would want to switch it to False.
  

  And as jscher2000 said.
  
  Print.printer_name.print_paper_height
  
  Print.printer_name.print_paper_width
  
  -the values are stored as measures either inch or metric or not according to U.S. paper sizes (letter, legal, custom, etc.) or 'A' type of paper sizes.

  These two settings are saved in the selection of paper made in the dialogue window of the printer properties for the printer that can be opened from the Properties button in the "native print dialog" window of Firefox which is what you see when you start printing in Firefox via {Ctrl + P} or one of the menu items print.

  These two settings are automatically set or changed with each print job which is sent to the printer. There is no way to set a permanent default paper size, the default is the last used paper sizes. 
  
  Right, wrong, or indifferent, Firefox does not honor the system-wide default paper or printer settings you make for the printer in your operating system. In Firefox the "last used" is the "default".
  

• Why Firefox hang when I open the printing preferences to print Web pages on my Dell 720 inkjet, after that Windows XP gives me the warning on a protection fault 0 x 0000005?

  I can copy text from websites and paste it into MS Word, where I can print fine in B & W or color. I can print from wordpad, too. And I had no problems printing in Internet Explorer. I'm just cannot open the printing preferences window when you use Firefox 7.0.1 and I don't have any add-ons like "Print Print Preview Update" (Acrobat, Silverlight, Office, and a few others). Firefox crashes when I try to open the printing preferences, but I am still able to print, only in the default settings. I use a Dell 720 inkjet connected to an IBM Thinkpad R51e with reinstalled Windows XP Home Edition 2002 SP3, processor Intel Pentium M 1.73 GHz 1.87 GB RAM (added). I installed the printer driver before connecting the printer, and I use Avira antiviral software. This laptop has had problems in the past, but I don't want to give up on this. Please ask if you need more information.

  I completely removed Firefox 7.0.1 and replaced by 5.0.1 and now I can open the printing preferences. Follow these instructions:

  Create a system first, restore point if you want.

  Then, click on start, Control Panel, programs and features. Uninstall Mozilla Firefox.

  Reach...

  If 32 bits...
  C:\Program Files

  If 64-bit...
  C:\Program Files (x 86)

  And delete the Mozilla Firefox folder.

  This should give you a fresh start. Then install the old version. Just bookmarks can be imported from Internet Explorer or registered before switching versions

• F300 series open the printing preferences window

  You can set the print preference setting window automatically opens on the 'Shortened' page, and if so how do you go?

  Hi, thanks for your help.  I saw messed around with the printing preferences it seems to have solved the problem and the windo preferences now always opens on the shortcut page.

• Cannot open the printing preferences

  Hi guys,.

  I recently bought a new computer with Windows 7 Professional. I have the HP PSC 1215 series that I used with my old Windows XP computer (it worked fine with that). With the XP computer it used the pilot for the series HP PSC 1200 and printed and scanned without any problems. Now, with Windows 7 PCs, I'll have a little trouble with the printer. First of all, I can't change the printing preferences (when I click on it, a window will appear and the disappers almost instantly). Second, it may not print correctly (using Microsoft Office 2010) Word documents. It can print text perfectly well, but the diagrams, word art and images it prints sometimes not at all, and other times it prints only part of it.

  On the HP site, it says you do not need to download all drivers for Windows 7, it will install itself. It was installing, but clearly not properly. Windows Update was updating the driver, but who made no change.

  I can do, or is the printer simply too old for Windows 7? Thanks for any help!

  
  

  Mr_Bean355

  Hello AA.

  I have good news... for me at least! I've somehow set so that I can change my printing preferences! What I did was I went into the settings of the device and, under the "Advanced" tab, change the driver to "hp psc 1200 series. Here's what it looks like:

  

  Now, after changing it, when I go into the printer properties, it makes appear this message:

  

  I just click 'No' and it works very well! Can I change the print "Fast draft" or "DPI Maximum" quality.

  Let me know if it works for you or not!

  Mr_Bean

• Internet Explorer 10 - can't set the printer preferences

  I have upgraded from Windows 7 to Windows 8.

  I also uninstalled the previous drivers and software of my Officejet 4500 - 510g and installed the software and drivers for Windows 8.

  I noticed that in Internet Explorer 10 when I want to print a page, the printer preferences dialog boxes are empty. Tab titles are in hieroglyphics, and the text in the preferences windows is all in capital letters.

  Using Firefox, the dialog box print properties (corresponding to the "Préférences" dialog box in Internet Explorer 10) works as expected.

  I try to use the version of Windows 8 desktop and then try to print from Internet Explorer. If it does not try to use a different printer driver.

  Another print driver.

• Mac OS 10.5 Hello cannot find the printer driver for P1606dn connected via a wired network.

  I tried to connect my HP Laserjet Pro P1606dn to my PowerMac G5 running Mac OS 10.5.8.  I have connected the priner to my LAN via the Ethernet cables and Switch 8 port NetGear.  I then properly installed printer driver from the CD provided on the Mac and went into system preferences / Print & Fax to add the printer to the list of the connected printers.  Click on the button «+»  The HP P106dn was listed in the table (kind = Hello).

  I chose this entry in the table, and the dialog box immediately went into action: the pullodwn "to Print using" listed the message 'Please select a printer or driver model' greyed and a spinning wheel called 'Search for new drivers' appeared underneath.  The dialog box search but never find the printer driver (I waited for 20 minutes without success).  I installed some other HP printers in this way on this machine with no problems, for example, HP Color Laserjet 2605dn.  Why this method does not work with this printer?

  I was able to connect to this printer with other (Intel) Macs in my house through this arrangement of LAN.  Is the printer driver for the Intel Macs only?

  I disconnected the printer from the local network and connected directly to my Mac with a USB cable.  The same process, and I was able to connect to this printer.  Successfully print a document page.  Although it gives me a work-around for Mac G5, I need to share this printer with other Macs in my household.

  I went on the HP download site and downloaded the latest driver for this printer, re-installed the printer driver on Mac and repeat the steps for the arrangement of LAN (above) complete the connection via the Print & Fax dialog box.  The result was the same: spinning wheel looking for a printer driver are not.

  I don't know what else to do, or why this facility will not work.  I would much appreciate it if someone could give an explanation for this or any suggestions as to what can be done?

  Ed

  I'm sorry to get back to you on this so late.  I was OOT Sunday all day.

  Ok. So, here is what happened.  As I mentioned at the end of my last post, I was in the process of resetting my printing system, repair disk permissions, then restarting.   Reset the printing system wiped out all my printers in the "Printers" pane in the "Print & Fax" system preferences dialog window  I moved forward and fix permissions of the drive on my system disk.  A number of authorities have been repaired, but nothing that I could decipher impression related ro.  Finally, I restarted my Mac and went directly to the dialog box print & Telec.

  As the printers pane was still empty, I'm gone before adding the simplest of my printers (LaserWriter 360 connected via AppleTalk) who has always been correctly added to the list printers in the past.  No chance!  WAITED a few minutes everything is was "Looking for new drivers.".  I tried the Color Laserjet 2605dn.  No luck.  Then the Laserjet P1606dn.  No luck.

  Thus, this way of solution did not work, and now I was without any driver associated with one of my connected printers.  I decided that I had no choice to rebuild the operating system.  I started my DVD of Installation OS 10.5.4 to rebuild my system (without reformatting my HARD drive).  Once which was finished, I've immediately went to the Print & Fax dialog box and tried to add in each of my printers.  In a few seconds the LaserWriter was added successfully, then the HP Color Laserjet 2605dn, and FINALLY, the Laserjet P1606dn.  Thus, it appeared that my upgrade to OS 10.5.8 was at the origin of the problem.

  I proceed with Sofware Update to restore the computer to OS 10.5.8 and again once, went to the dialog box Print & Fax to experiment with the addition of each of the printers again.  Stopping before the acceptance of each 'Add', I could find quickly and successfully the drivers for each of the connected printers.  So, it doesn't seem to be a problem with OS 10.5.8 find printer drivers.

  After reflection, I concluded that the problem must have appeared during the upgrade to OS 10.4.11 OS 10.5.4, but it remained hidden until I tried to add these new printers to the list of printers.

  I appreciate the reference to the last download Laserjet full feature software.   Since I was able to solve the problem without it, I mind not do the download.

  I want to thank you for patiently stay with me during the last two weeks, your advice and comments.  Just having someone to "talk" about it, it was reassuring and useful that I went along to apply each suggestion to the problem.  I tried to solve this problem several times on my own before that, the search of the forums, and I hesitated to participate actively – to reach out.  I'm feeling very different about it now.  Once again, thanks a lot.

• I can't find the printer driver for my printer to savin C9020 wsd

  I can't find the printer driver for my printer to savin C9020 wsd, anyone know where I can get it?

  Hello

  What operating system do you use?

  I suggest you to check if it is compatible with the operating system you are using.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  I suggest to the manufacture of the printer and check.

  http://www.Savin.com/downloads/default.aspx?HBN=drivers

  See also:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• host of the print driver for applications stopped working 5100cn

  I don't know if my previous attempt at this post went through...

  I've recently upgraded to an SSD and a new installation of won 8.1 (exactly the same thing I had on my old HDD) and now when I try to print from my Dell 5100cn I get the following error:

  Host of the print driver for applications has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: splwow64.exe

  Application version: 6.3.9600.17480

  Application timestamp: 545871c 1

  Fault Module name: dlpsc51r.dll

  Fault Module Version: 0.3.1281.4200

  Fault Module Timestamp: 4324d 269

  Exception code: c0000005

  Exception offset: 000000000000cd 87

  OS version: 6.3.9600.2.0.0.768.101

  Locale ID: 1033

  Information additional 1: 1 has 72

  More information 2: 1a7236b9868d6b38d3fd37b43ff05b06

  Information additional 3: 269 b

  Additional information 4: 269b7fc9d660b4191041ae78f0745b83

  For the life of me I can't figure out what I'm doing wrong... The printer still works fine if I swap back to my old HDD so I know its something I do (or not do)... I tried to figure this out all day and have installed several drivers in normal mode and compatibility without result.

  When I open devices and printers on the old drive HARD the printer name reads "Dell Laser Printer 5100cn PCL6" but when I check the devices and printers on my new SSD it reads "Dell Printer 5100cn PS"... So, I know that I do not want to install the same as I have done before and I can't understand what I installed... I use a Toshiba Satillite P75 A7200 if that matters...

  Help, please

  Hi Roydub83,

  Thanks for writing on the Dell Community Forum.

  Please uninstall all the printer driver on the system installed for Dell Laser 5100cn printer and then install the driver on Windows 8 using this link http://dell.to/1ETptNA. Install in compatibility mode if the installation does not engage.

  Answer please if you have any other questions.

  Have a nice day ahead.

• Host of the print driver for 32 bit applications has stopped working (v515w) - cannot print in addition to the test pages

  My printer is Dell v515w Red

  Currently, I can only test pages print.  When I try to print from any other application, I get this error-

  Host of the print driver for 32 bit applications has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: splwow64.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bd3ca

  Fault Module name: ntdll.dll

  Fault Module Version: 6.1.7600.16559

  Timestamp of Module error: 4ba9b802

  Exception code: c0000710

  Exception offset: 000000000006e3f9

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1033

  Additional information 1: 3edf

  More information 2: 3edf0feac74021b377b392a0115d74c0

  Additional information 3: bf41

  Additional information 4: bf41409fee27240aa0d3cd0ee9bc9fa9

  I've updated through microsoft and dell and some solutions.

  What is a dell problem or a problem of microsoft?

  My features are-

  Studio Dell XPS 1645, Win7 64 bit, IE8

  extacy1375,

  Unplug the printer.

  Uninstall the printer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download 64-bit Vista drivers and save them on your desktop. Install the drivers for Vista 64 bit in compatibility mode.

  Links to the 64 bit Vista drivers are to...

  Wireless printer Dell V515w All In One Printer - owners (RED) wire

  Rick

• Host of the print driver for 32 bit applications has stopped working. Why?

  Host of the print driver for 32-bit applications has stopped working msg apear when giving the print on my RICOH printer N/W command. Why?

  * Operating system: Windows 7 64 bit * 32 bits of MS office 2010 * Print driver 64 bit PCL6 * Adobe Acrobat Reader x.

  SPLWOW64.exe event name: BEX64

  Please give a solution.

  Hello

  (1) did you do changes on the computer before this problem?
  (2) what are the types of documents that you are not able to print?
  (3) is the issue limited only with the Microsoft Office program?
   
  Step 1: Test the problem to the boot to check if it is a question of software conflict. A clean boot to check if startup item or services to third-party application is causing this issue.
  Try to install the updates in clean boot mode, and check if the problem still persists.
  You can read the following article to put the computer in a clean boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
  Step 2: Download printer driver last OEM
   
  Step 3: Uninstall printer related software l and features

  un) go Panel.

  (b) select Uninstall a program under programs and features.

  (c) click on printer drivers , and then click Uninstall.

  (d) wait until the process of uninstallation is completed, restart the computer.

   
  Step 4: printer installation and driver when prompted then only connect printer and check if it helps.
   
  If the question is limited to Microsoft Office, I suggest to return the items listed below and check to see if they help.

  How to troubleshoot print failures in Word 2010, Word 2007 and Word 2003?

  http://support.Microsoft.com/kb/826845

  How to solve printing problems in Word 2010, Word 2007 or Word 2003?

  http://support.Microsoft.com/kb/826862

  Hope this information helps.
   

• where can I get the printer driver for canon lbp2900 printer. I'm running Windows 7 on a HP Pavilion PC

  where can I get the printer driver for canon lbp2900 printer.  I'm running Windows 7 on a HP Pavilion PC.  Windows Update does not list a driver for LBP2900 printr

  A quick google found this - http://software.canon-europe.com/products/0010177.asp perhaps?

  I have not tried, I don't have the printer.

  Its usually best to ask the manufacturer of the device for its pilots in the first instance.