32-bit TIFF import problem

Similar Questions

• Lightroom Photoshop HDR Pro 4.1 - 32-bit file reading problem

  Just watched a video Julieanne Kost on the creation of a 32-bit (HDR) image in LR 4.1. I tried this technique, and after you import the HDR 32-bit image in LR 4.1 (from Photoshop CS5 HDR Pro), the resulting image is empty with a warning triangle that reads "Lightroom has encountered problems reading of this photo. You will not be able to make adjustments on the photo. Anyone an idea why this happened?

  Thank you in advance,

  Phil

  iMac, OS x 10.6.8 4 GB of Ram

  Make sure you use a TIFF file and not a PSD file.  LR will import only 32-bit TIFF or DNG.

• Edition 32-bit TIFF is not possible?

  I have a 32-bit tiff file I want to edit, photoshop displays only a black image. Open the levels Panel shows a single peak in the levels of black, white and gray are nonexistent. Open the image in RAW shows an ugly blurry picture, nothing that the original image I know should look like.  I was hoping in PsCC - 2014.2 it would be possible, can anyone shed some light on this problem, thank you!

  OK, the file opens without error - but the values in the file is very, very close to zero (+ 0.0002 or almost) and also quite close by default black poster.

  Because it is less than 1/255, levels shown as black until you scale a little.

  You can change the scale display with the slider at the bottom left of the image window, or view-> 32-bit Preview Options

  An exhibition of about + 11 makes visible waves, while negative values will be cut to black.

• opening of 32 bit TIFF in camera raw (or not...)

  I followed tutorials on creating HDR images in photoshop using the 32-bit function.

  Once I created the 32-bit image and saved as a Tiff file. Then, I'm going to bridge and made sure that the preferences of camera raw are defined to allow suppoprted TIFFs. But I can't open this image in camera raw, it just opens in photoshop...

  In the turorials, I realized this doesn't seem to be one problem for others, why it will work for me?

  Sudarshan,

  Thanks for your reply.

  I managed to fix this now. I recently downloaded photoshop and so assumed it was the more up-to-date version. However it was not the case, as I had camera raw 7.0 is installed. I have this update to the latest version and itself has this problem, I can now change the 32-bit TIFF in camera raw.

• I need to D-LINK AIR PLUS XTREME DWL-G520 windows 7 64 bit please important

  I need to D-LINK AIR PLUS XTREME DWL-G520 windows 7 64 bit please important...

  Windows Update has a driver for the G520, but you need wired to the internet to get...

  I know because I have one running in Windows 7 64 bit...

• Import problems in Lightroom CC / Windows 10

  Import problems in Lightroom CC / Windows 10

  I have problems to import a batch of photos of a recent session. I am importing images, every time even on the same day, since a camera SD card on my hard drive using the option "copy as DNG.  My original files are Nikon raw (.) The NEF format) with sidecar JPG.  Among the 292 cases tried in importing, only 7 are converted. DNG format and do it in my catalog.  The remaining files have all been copied to my hard drive but are not converted to. DNG and do not appear in my catalog.  When I try to import and convert the remaining files that were copied on my drive hard but not converted to DNG or added to my catalog files is displayed with a check box but eventually fail to get changed or added to the catalog.

  I also tried to copy originals directly into a folder on my hard drive and making the Lightroom Import from there and get a similar result.

  I am under Lightroom CC on a Windows 10 PC.  Any idea what could be causing the problem?

  First of all why you are converting to DNG? LR CC read Nikon NEF files fine.

  Have you tried to copy the pictures to a folder on your disk and import only the naves with no conversion when importing?

  Start a new catalogue and test-only import NEF files with no conversion to DNG.

• Windows 7 64 bit VPN client problems

  Hello

  I am running Windows 7 Professional 64 bit and Cisco VPN client 5.0.07.0240. I am able to connect to my corporate network and work ok but connection is very slow!

  Connection time is distributed as follows:

  Client program VPN Opening: 70 seconds.

  Click on connect and wait for the user credentials dialog box: 30 seconds.

  Enter the credentials, and then click ok then 'user authentication': 90 seconds.

  "Negotiate security policies": 60 seconds.

  User area credentials if poster again, re - enter the credentials that the dialog box is empty, and then click ok: 90 seconds.

  "User authentication", then connection established: 120 seconds.

  I have a colleague running 64-bit Windows 7 (ultimate edition) which uses the same version and does not have these problems.

  Any ideas anyone?

  See you soon,.

  Gary

  Gary, thanks for the update. If disabling the firewall and restart vpn service did not help. Could you please try and install the 5.0.07.0290 version?

  Before do you, I would like to know if you import .pcf for the VPN Client files. If so, please try to re-create a file .pcf on the PC and try and use this file to connect. Also, I see that the existing .pcf file you are using is a file read-only. Could you change this and give permissions to write to the file, and try to connect. If th does not help the two steps will then install the 5.0.07.0290 version.

  Thank you

  Delvallée

• Lightroom 6 (6.3) import problems

  I have serious problems, import photos from my Canon 5 d mark III. I have over 300 new photos on my CF card, and the import function crashes after importing about 80 photos. Tried five times now, the same result every time. Try to import the same photo through my card reader is even more difficult. It crashes before the previews. The built in Windows import function works fine.

  But also try to add/import a picture existing file om my C drive, also does not work. It will display "0 photos.

  I used 5 before Lightroom. No problems.

  Any help?

  I have a desktop computer with 10 Pro 64 bit Windows installed on a disc SSD M.2 PCIe (Samsung 950 Pro 512 GB).

  You should consider the possibility that the card is bad.

  If you get a different card, take some photos, and then try to import, it work?

• 5.8.3 configuration of vCOps import problems

  I'm trying to import data from my vCOps 5.8.3 installation to my new vROps 6.0 installation.  When on the screen "Select source" I put the IP address of the system vCOps, the admin password and press "Add Source".  I get the warning that an agent must be installed on the system of vCOps, click 'OK', then am handed the certificate of the server vCOps. I check the box to 'Accept this certificate' and press 'OK', and it goes to a "Loading" icon... ».  In a minute or two, then I get a Java error that says:

  "Error occurred while trying to get information on the source of 5.8.1 system system: message = unexpected character ('G' (code 71)): expects a value valud (number, String, array, object, 'true', 'false' or 'null') to [Source: java.io.StringReader@4379be76;]. "[line: 1, column: 2]".

  I find it odd that it references a 5.8.1 system when we run 5.8.3 (verified via the menu 'About' in the UI vCOps).  I'm not sure if this is part of the issue or if it is assuming that one 5.8.1 or version later as 5.8.1 is the minimum version supported.  The vCOps and the vROps are set it up based on the device.  I don't have any special adapters installed, just the 'out of the box' vSphere adapters.  Two virtual machines are on the same subnet and the same ESX host, so there should not be problems with firewall.  I followed the steps of pre - req for confirming that I have adequate resources on both systems, as well as disabling dynamic threshold on the source system.

  I'm a bit of a loss as to what this might be, unless my source is incorrectly identified as 5.8.1 instead of 5.8.3, and it is therefore for the erroneous identification string that is causing problems with Java.  Does anyone have any suggestions?

  It turns out that I had a problem with DB corruption.  When we arrived the fixed DB it works as expected.

• TIFF to problem of Conversion of JPG

  I'm having a problem in Photoshop CS2, where I have a TIFF image and I use 'Save for Web' to save it in JPG format but the colors are completely false, as if most of the information has been discarded.  I know that from 16 bit to 8 bit, they actually are being ignored, but the images still looked exactly the same in the past up to that I reinstalled the program.  Even in the 'Original Image' pane, it shows the low color version.

  How can I fix it?

  Two things to check 1) color profile make sure you use the correct profile for RGB. 2 color) up, check and see if the color CMYK proofing is activate or some other color scheme. Or any of them can do what you describe.

• LR5 import problem: Photos do not show in the import window

  When you try to import CR2/JPEG files in LR5, import window shows empty records even though I can see the files in windows Explorer.  I also importing them from different places (from the camera, memory card, hard drive) and is always in white.  The kicker is I can open / import them by canon DPP and LR 4.4.

  Here are the details of my system:

  • Tested on Windows 7 64 bit
  • Administrative account running without any permission problem
  • I have uninstalled/installed LR5 several times that does not solve the problem
  • I tried to import a upgrade to my existing LR4.4 catalog and also with a new catalog.

  I created a video that captures my normal workflow.  As you can see, LR5 can not see one (CR2 and JPG) pictures of the card memory or hard drive but LR4.4 can see both of them without any problem.  Any help would be great.

  I do not read that you have atttempted reset your preferences file. That would be my next step in troubleshooting. (or-trashing-)-the-lightroom-preferences-fichier http://www.lightroomforums.NET/showthread.php?14226-resetting-

• 16-bit Tiff and PSD previews in Bridge is not displayed correctly

  Large multi layers files Tiff, PSD and PSB with alpha channels, masks and layers, etc. do not show previews for the bridge (or Windows for that matter). Many of them are very large 2-4GB, but even a typical 30-60MB file with some alpha channels and masks are also problematic with previews.  I think that the problem arises especially when the base images 16-bit ar since the version 8 bits correctly show most of the time.

  It's a question that has a cure?

  Thank you

  Doug has

  Photoshop CS5, Windows 7, 64 bit.

  Check your thumbnail option in bridge prefs... you will need for the parameters ' Do not process files su-ERS to '... Mind you, it'll take a while to rasterize these large previews so take a cup of java while the bridge made the calculations...

• 8.14 Acrobat Pro crashes (Win 7 pro 32 bit) Tiff conversion

  I can not the scanned images to TIFF (registered to the PC running Win 7 pro 32 bit) to convert to pdf format.

  The following details with the error message:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: Acrobat.exe

  Application version: 8.1.0.137

  Application timestamp: 46444c 82

  Fault Module name: ImageConversion.api

  Fault Module Version: 8.1.2.86

  Timestamp of Module error: 4788536e

  Exception code: c0000005

  Exception offset: 00074a 13

  OS version: 6.1.7600.2.0.0.256.48

  Locale ID: 1033

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Any help would be greatly appreciated

  Thank you

  Adobe Acrobat does not support this format TIFF.

• Important problems of browsing with FireFox with OS 10.7 Lion... toolbars missing, by clicking on the menus don't give nothing

  I was unable to connect after you have received the link from FireFox. All the menu items tend to disappear after loading, and I am unable to access any URL. If a successful click is that Firefox will be insensitive after 1 or 2 clicks more.

  I now use Firefox with Mac OS 10.7 Lion recently updated facility. There isn't any way that I can get to my bookmarks or URL that I paste or manually put more. The toolbar has disappeared, and I don't see the bar more address.

  -> Create a new profile as a test to see if your profile is the source of the problems. See:

  Basic troubleshooting: make a new profile

  • https://support.Mozilla.com/en-us/KB/basic%20Troubleshooting#w_8-make-a-new-profile

  -> If this new profile works, then you can retrieve your bookmarks and passwords the old profile. See this:

  Recovering important data over an old profile

  • https://support.Mozilla.com/en-us/KB/recovering%20important%20data%20from%20an%20old%20Profile

  Check and tell if its working.

• Picture import problem

  Updated my iMac to El Capitan on the advice of the Apple Support and my files my Nikon D750 NEF/Raw still won't matter, only JPEG files

  What happens, when you try to import your photos of Nikon RAW?  Do you have an error message on the incompatible file format, or what is the problem?

  Your camera's RAW format has been supported since Mac OS X 10.10. Yosemite and was introduced with the release of Digital Camera RAW Compatibility 6.01 .

  If you are shooting RAW & JPEG, Photos pairs stack two photos of the couple as a photo and the JPEG file will show in the photos, unless you open the photo in EDIT mode and use the command "Image > use a RAW original title image.