TIFF to problem of Conversion of JPG

Similar Questions

• Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

  Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

  Hi sdr2014,

  I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

  So, let's try this:

  If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

  Please let us know how it goes.

  Best,

  Sara

• Conversion of jpg to ASCII for code output ZPL-Zebra printer

  I print on a Zebra ZM400 using the ZPL code. I can upload images to the printer using Zebra utilities and I remember these images to print on a label, but I have to be able to download pictures using the ZPL code (using the ~ DG command). The ~ DG command needs the JPG image to ASCII format. I have other images that were already converted to ASCII (by someone else) that I am able to print, so I know what I do works as expected, however my problem is that I have new images which must be converted to ASCII format required and I don't know how to do this.

  So, my goal is to print a picture on a Zebra printer, but my real question is to know how to convert a JPG image to ASCII format (for the Zebra printer).

  Let me know if you need more information.

  Thank you

  Hi Emily,.

  Unfortunately, I have not well understand how this has been done before that the person who had previously completed a conversion is no longer works for our company.

  The ZM400 printer uses ZPL II of Zebra language to create/format of labels and the printer setup/order. Instead of download chart (~ DG), I am now using the command object download (~ DY), located in the ZPL II (182 p) programming guide. This allowed me to use a. File PNG rather than JPG, which was easier to work with.

  http://www.Zebra.com/apps/dlmanager?DLP=-227178c9720c025483893483886ea54a70963bb77ca94fcc1d65ce93943...

  I was able to use a modified version of your suggested method to make it work. The ~ DY command takes a parameter (data) which is a 'hexadecimal ASCII string defining the image', which is defined as: "the data string sets the image and is a hexadecimal representation of ASCII image. Each character represents a horizontal nibble by 4 points. "So the method you suggested is exactly what I had to do, however I didn't say that it must be represented in hexadecimal ASCII code.

  I converted the binary file reads (of the PNG) data into a byte array, then made a (padded two-digit in hexadecimal) number of channels within a loop conversion For to give the ASCII representation of the binary data. This gives a hexadecimal representation of ASCII to binary data. VI is attached.

  Thanks for your help!

  I encountered another problem: the PNG files took an eternity for the printer load into memory when printing (compared to the same image in Zebra. GRF format). I solved this re-reading the file saved on the printer, where it is native. GRF format (using the ^ HG command), then re-recording this output (now in the ZPL code formatted) to the printer. I guess there is a way to convert directly to the. Format of the GRF, but for now it does not work in my case.

  Thanks again!

• Problem of conversion using imagemagick

  Hi all

  We used imagemagick to convert images to formats and sizes.

  Refunds are generated, but not size exact, as mentioned in the file 'extraRendition_definitions '.

  For example, size defined for the type of rendering "Basket" is ImageMagick_RenditionValidation_Cart = resizing "220 x 220 > ' , but the interpretation that results is produced for 220 x 90.

  I use 'RenditionValidation' rendition set to create "renditions" and is attached to the image as the primary file.

  Here is the extraRendition_definitions.hda file:

  <? had version = ' 10.1.3.3.2 (071031) "jcharset = UTF8 encoding = utf-8? >

  LocalData @Properties

  nConvertPath = / home/oracle/software/installers/nconvert/NConvert/nconvert

  ImageMagick = / usr/bin/convert

  ImageMagickIdentifyPath = / usr/bin/identify

  ImageMagick_DefaultSet_Web = resize 800 x 600

  ImageMagick_DefaultSet_Thumbnail = resize "80 x 80 >.

  ImageMagick_DefaultSet_Preview = resize "250 x 250 >.

  ImageMagick_DefaultSet_Primary = resize "250 x 250 >.

  ImageMagick_PraveenTestSet_PreviewTest = resize "80 x 80 >.

  ImageMagick_PraveenTestSet_ThumbnailTest = resize "250 x 250 >.

  ImageMagick_PraveenTestSet_WebTest = resize ' 100 x 100 > '.

  ImageMagick_RenditionValidation_PDP = resize "150 x 150 >.

  ImageMagick_RenditionValidation_PLP = resize "80 x 80 >.

  ImageMagick_RenditionValidation_Cart = resize "220 x 220 >.

  ImageMagick_RenditionValidation_Banner = resize ' 90 x 100 > '.

  ImageMagick_RenditionValidation_Summary = resize "60 x 90 >.

  ImageMagick_RenditionValidation_Confirmation = resize "360 x 1400 >.

  RenditionInfoEngine = command

  @end

  @ResultSet packedConversion

  2

  pcName

  pcDescription

  DefaultGraphicSet

  Requires the base game of default rendering

  PraveenTestSet

  To test the different sizes and formats

  CorporateImage

  Common requirements of corporate Format

  ProductCatalog

  CMYK Hi Res and evidence of Images for print

  DigitalPhoto

  Digital photos in various sizes

  WebImages

  Refunds for web applications and web images

  Print

  Refunds for pproductivity applications and put in page

  @end

  @ResultSet DefaultGraphicSet

  6

  extRenditionName

  extEngine

  extType

  extSourceFile

  extParameters

  extDescription

  Web

  < $ImageMagick$ >

  Web

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_DefaultSet_Web$ > "< $outFile$ > .jpg '.

  A 72 dpi JPEG no wider than 800 pixels and not exceeding not 600 pixels

  Vignette

  < $ImageMagick$ >

  Vignette

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_DefaultSet_Thumbnail$ > "< $outFile$ > .jpg '.

  A 72 dpi JPEG no wider or higher than 80 pixels

  Overview

  < $ImageMagick$ >

  Overview

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_DefaultSet_Preview$ > "< $outFile$ > .jpg '.

  A 72 dpi JPEG no wider or higher than 250 pixels

  @end

  @ResultSet PraveenTestSet

  6

  extRenditionName

  extEngine

  extType

  extSourceFile

  extParameters

  extDescription

  WebTest

  < $ImageMagick$ >

  WebTest

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_PraveenTestSet_WebTest$ > "< $outFile$ > .png '.

  A 72 dpi JPEG no wider than 800 pixels and not exceeding not 600 pixels

  ThumbnailTest

  < $ImageMagick$ >

  thumbnailtest

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_PraveenTestSet_ThumbnailTest$ > "< $outFile$ > .png '.

  A 72 dpi JPEG no wider or higher than 80 pixels

  PreviewTest

  < $ImageMagick$ >

  previewtest

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_PraveenTestSet_PreviewTest$ > "< $outFile$ > .png '.

  A 72 dpi JPEG no wider or higher than 250 pixels

  @end

  @ResultSet RenditionValidation

  6

  extRenditionName

  extEngine

  extType

  extSourceFile

  extParameters

  extDescription

  PDP

  < $ImageMagick$ >

  PDP

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_RenditionValidation_PDP$ > "< $outFile$ > .png '.

  PDP page image

  PLP

  < $ImageMagick$ >

  PLP

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_RenditionValidation_PLP$ > "< $outFile$ > .bmp".

  PLP page image

  Basket

  < $ImageMagick$ >

  Basket

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_RenditionValidation_Cart$ > "< $outFile$ > .jpeg.

  Image to the shopping cart page

  Banner

  < $ImageMagick$ >

  Banner

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_RenditionValidation_Banner$ > "< $outFile$ > .tiff.

  Banner image

  Summary

  < $ImageMagick$ >

  Summary

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_RenditionValidation_Summary$ > "< $outFile$ > .gif '.

  Image for summary

  Confirmation

  < $ImageMagick$ >

  Confirmation

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_RenditionValidation_Confirmation$ > "< $outFile$ > .bmp".

  Image of confirmation

  @end

  @ResultSet ExtensionFormatMap

  2

  extension

  format

  jpg

  image/jpeg

  JPEG

  image/jpeg

  gif

  image/gif

  PNG

  image/png

  TIF

  image/tiff

  TIFF

  image/tiff

  @end

  @ResultSet RenditionInfoFormatMap

  2

  rifmFormat

  rifmEngineName

  TIF

  nConvert

  TIFF

  nConvert

  @end

  ========

  Am I missing something here, I need to generate refunds of exact sizes in the sense of 'RenditionValidation' as a whole.

  Thank you

  Praveen.

  This problem is corrected using the - culture, no action required.

  Thank you

  Praveen.

• Problems with conversion of number chain

  I try to display a receipt, after that some items have been added.

  The application works well for an article, but when I add more than one, it displays a different value of what should be.

  I also have problems in the display of the element of the second and third.

  Can someone help me solve this vi?

  Thanks in advance!

  I found the error. The mistake was made in the conversion of a string to a number. I just used Fract/Exp chain to the number, and it fixed the problem I had.

• Problem with conversion

  OK, I read like 20 posts that appear to be similar, and after following the instructions I'll always have the same problem.  I downloaded a .flv.  Converted to .wmv using separate software.  Now I plug my e280v2 and start SMC.  I import the file and click on convert.  The conversion bar reaches 100%, but the other bar stops at 49%.  It does seem to matter how long I leave it there, it will not be completed.  I am extremely frustrated at this point.  Any help will be most appreciated.

  Thank you

  Tim

  Try to convert it to .avi and .wmv not using your other software. As .avi v2, where v1 to prefer it .wmv.

• Terrible problems of conversion of the site to meet the new version of Muse (and other important observations)

  Dear all

  I was very pleased with the new version of sensitive Muse.

  I had downloaded the pre-release version and tested it and presented my comments as a good obedient of Muse Web site designer, after all, we must all contribute to get the best system that actually works.

  Is the day of release and I've updated Muse via my desktop CC application.

  I watched videos Adobe make reference to liberation, that everything online and even read through the excellent series of video training sensitive to themes of Muse.

  Only some of my clients gave me their business with the understanding that I would like to convert their sites Adaptive desktop, Tablet and phone versions to fully responsive as soon as the new version is out.

  A customer has a big launch very soon which also requires the contents of the site changes so I decided to tackle this site first.

  I made a copy of the site and opened it and it converted or whatever Muse only when you open an existing site in the new face.

  I changed all the settings, site, properties etc etc in the offline version of the page.

  Then, I have worked to make the Master suited page.

  It is then that my nightmare began.

  Nothing seemed to work as described and the biggest problem was the clamp that was so slow, late, dried, etc., it was almost unusable.

  In any case, after 18 hours, the page master has been made and when you preview in the development tools Google Chrome seemed reasonable enough.

  Why 18 hours you might ask, well partly because of the clamp problem mentioned previously, but the entire system is extremely inefficient in the way it works with so many questions to consider whether to apply or not apply to each object and a constant in Google Chrome preview as you could not trust what has been is displayed on the screen of Muse.

  Next challenge was to convert the content of the home page. It wasn't a page complex and only consists of 6 pieces - pictures, text and a button on the State.

  I have applied all the settings and slide the clamp to slightly reduce the width of the browser, that when I had to move showed major problems on the page immediately:

  • Huge empty spaces appeared
  • The objects did not adapted as it should and that I had seen in so many videos - so, for example, if a block of text was next to an image they immediately went massively out of alignment when you drag the clip
  • The finished status button on the margins of the page
  • Etc etc.

  In any case, after 6 hours of tearing my hair that I give up and contacted Adobe.

  They began a session remotely and said I had everything set correctly and that Muse wasn't as the developers had planned.

  Finally, they said by e-mail on the .muse file, which I did, and of course I'm sitting here with a looming deadline and still no answer on how to solve the problems, which no doubt all my other existing sites will not have when I come to convert.

  Other problems discovered during my tests to date are:

  • Right click for very slow service
  • Slow to open library (more despite being told you can download several items from the library when you try to load too, a lot (by Muse) everything freezes Muse and you force a fence via the Task Manager)
  • Adjusting the position of the breakpoint by right clicking on the breakpoint window very slow, late development and jerks (IE just like the clip)

  In addition, I was absolutely horrified to see that there were other issues, especially since many objects react at all:

  • Image do not respond in the envelope
  • Compositions of
  • Slideshows
  • Forms
  • Google maps has only reactive width no height as well
  • Google Map inserted via insert HTML while I updated sensitive width, there is not (I guess the code must be added to make all insert sensitive html and some guidance on what could be this code would be useful Adobe, including a video on the subject feature Muse is so limited you must add a large number of html).
  • YouTube has only reactive width no height so completely useless
  • No effect of scrolling on Muse reactive
  • In addition, virtually all 3rd party widgets Muse themes et al. do not work with response as they say they are waiting for Adobe to undertake the necessary work on base first. So any site that uses widgets cannot be converted (and almost all do so because of the lack of functionality of Muse)

  This Muse is not really sensitive and it is useless to creation or conversion of sites until it is.

  Also, I was extremely disappointed to see that despite me and a lot of other designers asking some features via the Forums Muse he had not been included. This includes, but is not limited to:

  • Draw ellipses (& circles) and polygons that you can in InDesign in forms or frames of image
  • Site search function
  • Images do not clearly appear in the Muse until preview
  • No password protection function
  • Form always using reCAPTCHA 1 not 2
  • No installation on the forms file upload
  • Slideshow of legends still not discoloration with images
  • No idea if all the SEO issues as I cannot finish a site and scan

  What a disappointment is complete.

  So, for me, sorry Adobe not usable as a form builder free site responsive until much more work has been done, hopefully very soon.

  Kind regards

  Mike

  I just spent two weeks, putting in place a sensitive muse site. I am gray, tired and frustrated. I was so excited to make this project work.

  I wish I had read these articles earlier.

• problem with export to jpg

  Hello

  I try to export an .ai to jpg file and whenever I meet the same problem, namely, the file is cut down and has more space upstairs when I see in preview or Firefox. Can you help me with this? Why is it?

  Thank you in advance,

  Xerus

  Xerus,

  Depending on your version, you must set benchmarks of area/crop Board chart/cultures to adapt to the work, and there are different ways to do so.

  I apologize if it's trivial knowledge for you.

• Strange problem with export to jpg files

  I'm having a strange problem with exporting my vector files to jpg.  When I export the file as a .jpg file, then open it some text or shapes (such as rectangles or squares) have disappeared.  When I go back and open the file .ai the stuff is there, but he just went on the jpg.  If I open the .ai file in Photoshop it's gone too.  I have to save the file in pdf format, then open the PDF in Photoshop and export in a file .jpg away.  It's very strange.  If I go into the Illustrator file and re - type the text disapers, it usually fixes the problem.  I'm not an expert with Illustrator, then I can do something wrong, if anyone can help please let me know, thanks! (I have CS3)

  Things that are disppearing are defined for a recovery? Look in Control Panel attributes with objects selected and see if all the overprints are defined.

• Transfer problem suddenly any content jpg

  My hotmail account will be is more I would before - or edit any - jpg drawings already attached to some mails, and I want to forward all or part of.  What is going on?

  Hello

  You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.

• Problem copy PC files (jpg) to 7 2801 slate

  I'm trying to copy pictures from my pc on the slate by using the USB cable supplied with the unit.  It seems to connect OK, I can charge the device and I can see it in Explorer on my PC, well that Explorer does not have any content.

  I can't work out how copy and paste or drag and drop files on the slate (Error Message: the device has stopped responding or is not disconnected).

  I would be able to move external files / jpg on the slate?

  And if so, how do I do it?

  Thank you!

  NB: There is a lot of available memeory, both integrated and on the 16GB SD mini I added

  Hello Lucky_D, welcome to the HP support community!

  I just connected my my laptop Vista64 Slate7, and the two "internal storage" and "SD card" this, together with the contents of the folder.

  I copied also some .jpg in the internal storage DCIM folder.  No problemo!  (I used copy/paste).

  Check something on your Slate7 - go to the app/storage of settings/USB computer

  (3 blocks stacked, top right) connection and see if 'PSG' is checked.  If this is not the case, check it.  Connect it to your computer, preferably not through a hub.

  Also, the SD card - do you have "mounted" card?  Go to settings/storage, then scroll down to "Mount SD card".

  If you don't always win access to the memory (s), try toggling the PSG to 'camera (PTP)' then back again.

  Let me know how it goes!

  WyreNut

• Problems of conversion of a Web page in PDF format.

  We have a user who is using "Adobe acrobat X Pro", and when it uses the function to convert website to PDF it captures any page, such as tables.  If another user connects and does the same thing, he seized the entire page without problem.  Is there maybe a permission that can be governing its access to capture the entire page?  I would be grateful for any suggestion.

  Save a Web page does not work identical to print in PDF format.

  Things like the images of background, CSS Styles and iFramed items (like tables) will not save, but they will BE printed.

• Problems of conversion VMachine in ESXi 3.5

  Hi, I am running ESXi 3.5 and Converter Standalone Client and have not had any problems of photocopiers up until recently. While executing an operation of machine to convert (trying to replicate an OpenBSD system) converter Client just hangs and the following error message appears in ESXi events every few seconds until the converter fails, the operation

  Failure of the permission to connect the user [email protected]:No

  It's strange, because it has worked well for me in the past weeks and now throw errors. I have not changed any user that is the root user settings. Any direction would be much appreciated I love cloning just the machine as their construction more fill a few R & D.

  Mick

  Now is it possible to add it to the inventory?

  Browse the data store, go to the folder of the virtual machine, click with the right button on the vmx file, add to the inventory.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Problems with conversions - unable to write to the Fail

  I have a situation where when trying to import a physical machine using VC/Converter 3.0 where the import fails with "Unable to write to a file" - the ESX Server is via the FQDN - when I add the same host by IP address works of import - I have confirmed DNS is configured correctly and is not able to resolve the physical box shape, I try to import by name on the ESX Server - I'm sure it's something simple but would love to hear any ideas or suggestion-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

  Ah yes... See monkey brain came handy!

  =========================================================================

  ! http://communities.vmware.com/servlet/JiveServlet/download/1200101-20223/vExpert_logo_100x57.jpg!

• To the PSE11 windows 8 category PSE6/windows vista: problem catalog conversion

  Hello. I saved my PSE6 on external hard drive (I optimized/repaired before saving) and then installed PSE11 on the new 8 pc windows - no problem. Followed all the advice, I have seen/read to convert saved PSE6 catalog but doesn't seem to find (I tried custom location / browse and go to the folder where the backup is saved, but it just says: "no file matching your search").

  I then tried to install PSE6 on new computer restored catalogue him, then looked for the catalogue still in PSE11. It seemed now to find and convert, but some files where missing and a lot of keywords/tags as missing.

  I tried to uninstall the lot (including the removal of the files in the files they were saved in the new computer) and after looking at the Forum, tried to backup old PSE6 on old pc again, but this time the first saved metadata on files and then sustained upward (took HOURS!) Reinstalled PSE11 on the new computer and tried - back to the first problem - does not "see" the backup, even if I know it's there (there is a .tly file, etc.).

  I don't really want two versions of the PSE on the new PC and I REALLY don't want to have to start from scratch all 5000 marking files! I hope someone can help and tell me what I'm missing. I certainly not a seasoned PSE user, mainly due to lack of time and started with PSE6 knowing nothing at all. Am hoping to have more time to use PSE as I will work from home, but I just spent the major part of 2 days trying to figure this...

  Yes, of course. Please check that you check the box corresponding to the maintenance of the folder hierarchy.

  Thank you

  Catherine