Power LED is red (WAG354G)

Similar Questions

• what it means if the power LED flashes red, that I am plugged into the power outlet

  help what is a flashing red light on average power

  Yes, the batteries in laptops are like any other rechargeable battery, they have a life cycle. Since the bits of information so far, it sounds as if you do not want to replace the battery. You can see what is essentially a stack to the page linked below:

  How to replace your laptop battery
   http://www.Dummies.com/how-to/content/how-to-replace-your-laptop-battery.html

  What I would say has visited support site for the manufacturer of your laptop; using your specific model name/number search for laptops support page. You should be able to get some type of documentation that will explain the flashing red light. Also get the specifications for the battery of your specific model (see technical data). Though on checking support site for the manufacturer to see if they have their own forums, if so you may be able to find details about the light, and what is involved in the specific battery in your laptop.

  Computer manufacturers
   http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Kind regards

• Mac Pro Tower 2012 Unresponsive (Power Light On, red LED turn on)

  Found my Mac Pro 2012 Tower responds more today with the power led and a red led light on the inside of the tower.  The subject of research and could not find anyone who had this exact question (unless I'm missing something) and I also have trouble understanding what LED light and how do I proceed.  Any advice would be greatly appreciated

  

  Remove all external and off devices, disconnect all external cables

  Check your GPU for dust/dirt/creep (where it "fits" of the socket), you can remove it but when undertaking this make sure that you are properly grounded at all times and the components are put in static free containers, then clean the inside of the computer with compressed air ensuring that you damage the connectors not blowing the white point.

  Replace the GPU and follow the instructions to reset the SMC.

  Reset the management system (SCM) controller on your Mac - Apple Support

  See the yellow highlight

  

  Plug directly into a wall outlet connected to the ground not a power strip or battery backup.

  otherwise, to replace the CMOS battery on the logic board, after that leave the device unplugged for 30 minutes or more.

• Power led red after that Satellite L755 was closed

  Hello.

  After I Shutdown Windows and the laptop is power off red power led is displayed.
  It is not blinking.

  What does that mean?

  + The message was edited: model number added to the topic.

  Don't you think that a person can say anything on your laptop without knowing the name of your unit from Toshiba?

  If I say, I need some info on my car +... you would ask: + what car? +

• Z820 - button Power LED blinks 4 times (red) with beep... bad card (Quadro 4000) graphics?

  Hello

  My Z820 at the office is suddenly having a few hardware malfunction.

  When I turn on my machine, the PSU/system fans don't rev and the Power LED button flashes red with a beep 4 times.

  According to this page of troubleshooting, this indicates a faulty PSU on the new UEFI computers:

  HP desktop - computer does not start and emits a LED or a beep Code

  Section "code beep and LED descriptions.

  Get the exact model of LED as the example of "power failure".

  Then, I got a new power supply replacement. I still have the exact same model LED and beeps...

  So, I have drawn deeper and found that when I removed the Quadro 4000 card graphics and then put on my machine, the power button LED is lit in blue (led code ' computer-S0 (normal operation) "") and all the normal spin fans.

  The Quadro card seems to be the culprit...

  Unfortunately, I have no alternative graphic card laying to verify this around, I'm waiting for a replacement of the graphics card (via HP service) to arrive tomorrow.

  Is it possible that the power LED button code (4 times red with beep...) has nothing to do with a bad power supply and that my Quadro is bad?

  Dries

  Dry... that Z820 has been giving you headaches.

  Many fault codes have not changed since the previous workstatons.  I hit this series of beeps of error in the past, and often doesn't mean that the power supply itself is the cause.  It can be a hardware device to the bottom of the chain causing a power surge to power, triggering his "crowbar circuit: fault protection

  http://en.Wikipedia.org/wiki/crowbar _ (circuit)

  Here are the instructions to deal with this series of beeps of a previous HP xw technical and repair.  Note the number 2 in the troubleshooting instructions... usually you don't have to go down to 3, in my experience.  I think that you have already found the faulty unit:

  Loss of power.
  1. open the access panel and make sure that the power cable is properly
  connected to the system board.
  2. Locate the faulty device by removing all devices and then reinstalling one at a time
  until the workstation fails. Replace the device at the origin of the failure. Continue to add
  devices to make sure that everything works correctly.
  3. check the power supply feature.
  a. turn off the AC power.
  b. remove all cables internal power on the system board.
  c. connect the power supply.
  ● If the power supply fan turns and the BIST LED lights, then the
  power supply is good. Replace the motherboard.
  ● If the power supply fan does not turn or the BIST LED does not
  light up, replace the power supply.

• Qosmio X 500 does not start and the power LED is flashing every 5 seconds

  Hello
  I need help my X 500 does not start now. I tried to launch the NB as usual and suddenly the X 500 start or even power up.

  If I press the power button / stop it makes no noise, the power LED on the button and the second power LED just bliks once and turns on and keep blinking every 5 seconds.

  I tried to:
  * Remove battery and power up with AC only
  * power only to batteries
  * remove the battery power button hold for 30 seconds and over power with AC, battery only athen

  but it did not help.

  I checked the LEDs AC & battery, but they do not blink, they are just RED, so there is no problem in battery or AC.

  No idea where could be the problem?

  Thanks for help
  Frantisek

  Hello

  The failure of RAM could be the reason for this behavior of the laptop.
  Remove the RAM modules with good modules tested and check the functionality of the laptop.
  In the case of RAM isn t the troublemaker, the motherboard could be affected.

  Good luck and share your experience with us.

• flashing power LED, interrupted Firmwareupdate? N900 WNDR4500

  Hello

  a few hours earlier, the N900 router lost connection to the modem for a few seconds. It happens all the time, so I stop the router and then turn it back on.

  Now the Power LED blinks green all the time. I have red, this could happen if a firmware update is interrupted. Now I don't know what to do. I tried to reset the entire router, but router does not restart after pressing the button reset for 10 seconds (I wait 10 min now).

  It would be nice if you canhelp me

  Best regards

  Nils

  No, I can't ping the router and I can't open the URL 192.168.1.1 / 192.168.0.1

  not even the modem can find the router.

  We use an easybox803a by vodafone as a modem. The thread of this box is really bad, we have the netgearrouter spending range. the N900 is connected to the lan boxes easy port.

• Codec C20 no led no red.

  Hi all

  I try to do a factory reset on one of our endpoints (profile 42 C20) that I can't connect to it due to authentication failure. Somehow after that I upgraded to 4.1 TC5.1 it resets the root account, but none of the default works or what it was worth.

  While I'm doing the factory reset: press and hold the power button until the led goes red - I it held for more than 90 seconds and does not have red... I tried and tried, and the indicator light on the codec does not red...

  Can someone please help?

  See you soon

  Hugh

  Hugh,

  The behavior has changed in TC5.1. The RED LED lights is no longer, but rather the Green LED flashes. The process is always the same:

  1. Disable the codec.
  2. Press and hold the power until the led on the front in red flashes green.
  3. Release the power button and press the button twice within 5 seconds.

  Thank you

  Paul

• Satellite R840-139 - Power led blinks

  Hello
  Sorry for my bad English :-).

  a computer whose power LED flashes orange. I tried to read the error code is 01001010 = 4 Ah. I think my computer has a bit of a shock, but I'm not sure. It would be a failure but 3V but which?

  I tried to press and hold the power for 30 seconds and reconnect the power supply and the battery and nothing changes. I measured the voltage charger is about 19V.

  He had already put in this fashion several months ago, but has restarted.

  What can I do?

  3V resembles the RAM. Try a different RAM module.
  If it still does not respond, it may be a faulty motherboard.

• Satellite Pro L650 turns off after start; DC In and Power LEDs blink on stop

  A friend Satellite Pro L650 having worked well until yesterday, all of a sudden turned itself off. Now, at startup, it lights up normally for about 10-15 seconds before turning off suddenly. Turned off, the DC in white/blue LED and the orange Power LED Flash on a broad set of intervals of approximately one second. This extinction happens if I leave Windows or press F2 to enter the BIOS setup.

  I guess this blinking is intended to serve as a kind of diagnostic code, but I have yet to track down what it means. Can anyone help?

  To avoid confusion, power without the product stack the same, sudden stop experience, except the two LEDs remain solidly lit this time. With or without battery, trying to turn on again immediately after that a shutdown produced no response at all. Remove the power cable and immediately it reconnect again and turn then produced a brutal power off, but in less than 5 seconds. More wait between attempts to market seems to give a little longer powered on State, but without fault, the machine turns off just suddenly. With its short time 'turned on' we are talking, there cannot be any kind of thermal protection?

  I had an old Satellite L450D lying around that uses coincidentally the same AC PA-1750 adapter, but use it made no difference. Of course, the battery does not have the L650!

  The only previous numbers, that I am aware of this machine have been intermittent case of Windows reporting "Plugged in, not charging", but as my friend use it exclusively on the network, it was not a problem.

  Your thoughts will be greatly appreciated...

  WTF?

  What is an unmoderated forum?

  Can someone help with my problem?

• Satellite A200-1ZF starts not flashing power led

  Hello

  Today, my laptop Satellite A200-1ZF wouldn't start, instead, my power led flashes orange-orange-blue-orange-orange - blue and so on and so forth.
  The HDD led transforms the blues when I turn on the computer and seems to work fine (I hear the normal sound of market from the HARD drive).
  I tried to remove the RAM module to see if there is a fault in one of the modules, no help. I tried removing the battery and it works only on current alternative, also no help.

  Anyone have any idea?

  Hello

  I'm a bit confused of m.
  If I understand you just your laptop starts up but screen is black or how figure you?

• Satellite Pro A120-151 - switch and power LED blinks

  My 120-151 will stop when I used it. On the laptop, the power LED flashes: short-long-long-short-short-short-long-short

  Anyone know what this error code?

  Hi mate,

  I had a similar problem which stops my Satellite A300 and the power light was blinking. This happens always after 1 or 2 minutes.

  I decided to contact an authorized service provider. Technicians control the laptop and fix it for me. The repair took only a few days and it was free because the laptop was still under warranty.

  I hope I could help a bit! :)

• Portege R100 stoped working - the power LED flashes error codes

  I have a R100 that has suddenly stopped working.
  The power led (clear amber with the image of the power wire) flashes what appears to be an error code of 5 flashes with a long pause on the last flash, followed by 3 flashes.

  That - what it means, and where can I get a list of all codes error?

  I changed the main battery, changed the spare battery and changed supply - and again, I get the error permanently. I was not able to power the laptop at all since it started. When you press the power button / nothing happens.

  I hope someone on this forum has some information that may help you diagnose this problem. Tech support representatives Toshiba post here?

  Thanks in advance.

  Hello

  I m not a R100 owner but to me it looks like a card mother malfunction because you have already tried to exchange the battery and the AC adapter.

  In this case, the best solution would be if you go to an authorized service provider. Technicians can consult the specifications and they know what means this code I think.
  Here it s only a user to user forum and I have never seen anyone from Toshiba again.

  Anyway, here you can search for the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!

• Satellite L40 - 15G - does not start, only power LED lights

  Hello.

  I have a Satellite L40 - 15G that will not start. I click the power button, or with the battery, and only the power led alternately. I can open and close the cd/dvd, but nothing else works. No beeps when I remove the memory, the hard drive led blinks even. I tried with another hard drive, and it's the same thing.

  Could this be the motherboard, the processor?

  Appreciate the help!

  Hello

  Unfortunately, it looks like a hardware malfunction. I guess that it s related to the motherboard or perhaps CPU, if you have already tried another memory module.

  You should go to an authorized service provider. Guys have good diagnostic tools to check your laptop and repair. In addition, they can order spare parts Toshiba.

  Sorry, but everything that s what I can say. Here he only a user to s forum

• Yellow flash - Satellite Pro 6070 DC power led

  I have a Toshiba laptop that I got from a friend, when I push the power button that flashes a green light as if it's going on, but then the DC power led starts flashing yellow. I have looked this up, but wanted to make sure it was good...

  I thought he had 3 batteries on the cell phone the main bios one and another one. I looked at other newspapers on here and tried to run right next to the power, but the same thing happens.

  How would he fixed or what could be the problem?

  Hello

  It dose not sound very optimistic the domain controller IN the witness lights usually green when DC is supplied from the AC adapter.
  But if the output voltage adapters is abnormal or if power outages, this indicator flashes orange.

  Either there is something wrong with electronic power supply on the motherboard or adapter AC is defective.
  I think it s the first possibility and in this case I n t think you will be able to fix it yourself.
  I'm afraid the technician advice and help is needed: (m