32L4333DG TV - need help with configuring WLAN

I bought a flat 32L4333DG of Toshiba, but cannot configure the wireless connection.
Help me please.

Message was edited: assignment has been translated

Advertisement

What's the problem? Have you read the instructions in the manual how to connect WiFi TV?

There are 3 different methods to configure the WLan configuration:

_1) easy Setup (WPS) _
+ If the AP is WPS compatible, this method can be used. +
+ WPS is a standard of the industry, designed to facilitate the wireless LAN connection and security settings. WPS automatically configures all the wireless settings. +
+ NOTE: WEP encryption is perhaps not able to configure through easy implementation. +

_2) assisted Setup (installation using notification s AP information) _
+ Name network, authentication and encryption are decided according to the information provided by the AP. You can manually set the security key. +
+ The security key must conform to these conditions: +.
+ TKIP/AES: ASCII 8-63 or 64 Hex characters +.
+ WEP: codes ASCII 13 5 or 10 or 26 Hex characters +.
+ There's a key ID to set for the WEP encryption. +

_3 _) manual configuration (manual entry of all parameters)
+ Some types of encryption are only compatible with specific authentication types. +
+ When authentication is an open system, only WEP or none is compatible. +
+ When authentication is shared key, WEP is compatible. +
+ When authentication is WPA - PSK or WPA2-PSK, TKIP or AES is compatible. +

+ When the inconsistent authentication/encryption pairings are detected, a warning message will be displayed and no connection attempt will be until the conflict is resolved. +

+ There's a key ID to set for the WEP encryption. +

Tags: Toshiba

Similar Questions

  • Need help with configuration on cisco vpn client settings 1941

    Hey all,.

    I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...

    If anyone can help with orders?

    I need the installation:

    user names, authentication group etc.

    Thank you!

    Take a peek inside has the below examples of config - everything you need: -.

    http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html

    HTH >

    Andrew.

  • Debugging - need help with configuration

    I also posted this in advanced by accident...

    I need help to my local development for CFBuilder debugging machine configuration. Developing CF applications is configured correctly, but I have problems configuring settings for debugging for CFBuilder/Eclipse. CFBuilder is installed and connected to RDS, and CF administrator is configured to debug level line. I'm running Windows 7 x 64 with ColdFusion 9 (using IIS).

    All my projects are in my "C:\Dev" folder, and each project contains a folder "www", which is the root of the web project. So, I have my projects organized like this:

    C:\Dev

    TestSite

    design

    docs

    www <-web root folder

    , I have created a ColdFusion project and he mapped directly to the folder root 'www '. In IIS, the web root folder is mapped via a virtual directory under the web site default and is accessible from "http://127.0.0.1/testsite"" "

    I have configured my RDS server that works correctly, so I can see the databases on the server. Nice. I also set up a server in the list of servers in the perspective of coldfusion and imported directly from my RDS server settings. It has the same name as my RDS Server, which is 'Server RDS Local.' I also added a URL prefix for "testsite" which is mapped to the local path: (C:\Dev\TestSite\www) and "http://127.0.0.1 \testsite. And finally, in Debug maps (preferences window), I said 'Server RDS Local.'

    Everything seems to be installed, but I can not debug. Here's what happens:

    Of the ColdFusion perspective, I click with the right button on index.cfm and select "Debug-> ColdFusion Application" the first time I do it, it switches on the ColdFusion debugging Perspective and loads of " " http://Homepage/ 'and then nothing seems to work. On the debugging tab, it shows me that he has created a new launch for my project as follows:

    TestSite

    Local RDS Server

    Model of ColdFusion

    I see my breakpoint in my breakpoints tab. But I can't seem to get any further. I can't find a way to run at my breakpoint. The home page for the current debugging session is "http://homepage/" which is something I don't understand. How CFBuilder go to the correct home page for the debug session? Maybe that's the key of.

    Hello

    Please right click on the project, and you will see an option "set the URL prefix. Allows to set the URL of your project.

    Thank you!

    Bhakti

  • Need help with configuration of VLAN SF300-24

    Hello

    Let me Preface this with the fact that networking is certainly not my point hard, so here, any help is greatly appreciated.

    I'm trying to segment on a virtual desktop on its own VIRTUAL local network infrastructure using a Cisco SF300-24 Layer 3 switch. I can get the switch to connect to the network with the assigned VLAN 1 an IP address on the subnet of the network (192.168.16.X), but I can't get anything this is set up VLAN 20 (192.168.20.X subnet) to connect past the VLAN 20 (192.168.20.254) gateway IP. The ports assigned to 20 VLAN are defined to access the mode if it matters.

    Here is a diagram to illustrate what it looks like, as there is another (L2) switch involved.

    So I'm not really sure what I am missing here since all settings seem simple enough.

    Hi Simon, I recommend you remove any server active directory and essentially remove all safety factors. This will give the idea of where to start.

    If you take a quite basic set, 2 Windows 7 workstations without a Firewall window activated, they both work as expected.

    It must be remembered that in firewalls, even if they are able to respond to ICMP if the request is from a different subnet, they will not be because he is recognized as a network abroad. You must know the network on these computers or make sure the computer does not care.

    You may be able to do this by simply adding additional subnets on the advanced configuration of the network card (if it does not take too much address space) as an example.

    Or well, as you have discovered that you can add routes, which is a bit heavy and inconvienent, but effective.

    -Tom
    Please mark replied messages useful

  • Need help with configuration without wire - JO L7680

    I my 7680 on a wired network and cannot find a way to convert wireless. We now have a wireless router and Windows 7 and that you can not use the cable as a result of physical limitations. I keep seeing reference to Wireless Wizard, but it does not appear in Control Panel. What I have to reset everything and download the installation package again to set up or y at - it another way? Thank you

    Don't forget to download the updated drivers from http://goo.gl/E3nxG.

    If you already have the drivers installed, then you can click on the start menu of the Win7 PC.
    * Click on all programs
    * Click the HP folder
    Open the series record for the L7680 (or a similar name)
    * Select Add a device

    or you can re - install.

    When you select wireless software will guide you through the connection of a USB cable from the PC to the printer. This will allow you to enter settings wireless into the software and the software will transfer the information to the printer. After the installation or the addition of a device is done, then you can unplug the USB cable and use the wireless printer.

    I hope this helps.

  • Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

    Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

    Let me know if you need more info... in fact I have a setting error while installation said

    -(/ etc/hosts has no correct entry for the host name)

    Host: 192.168.85.100

    Win7 ip: 192.168.1.x

    Thank you...

    (host computer)

    Win7 64 bit

    (vmware)

    Oracle Linux Server 6.3 version

    Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

    Oracle Linux Server 6.3 version

    -(/ etc/hosts has no correct entry for the host name)

    Then post your/etc/hosts.

    Host: 192.168.85.100

    Win7 ip: 192.168.1.x

    Why 85? have you tried 192.168.1.100?

  • Need help with network home using Airport extreme

    I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

    Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

    My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

    Any help you can provide would be great.

    I would like to get the return tech to help you to...

    But it is likely that something (or someone) has tampered with the settings.

    The layout is fine... but you can cause problems with the network by creating a loop.

    This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

    Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

    Unplug the two AE you have that function as extensions...

    Turning off everything else... then it works again...

    Do it in this order.

    Modem... Wait 2 min

    AE... Wait 2 min

    Switch.

    Now check that the network is working properly... power of customers in various locations and make sure everything is good.

    If so, then manually reset the two AE of factory and redo their installation.

  • Need help with following error Message: ERROR of OPENING WET7CABLE. LOG FILE on my Windows XP laptop

    Please need help with an Error Message on my cell phone. The message is as follows: ERROR of OPENING WET7CABLE. LOG FILE

    This message came after running a disk that was provided by Belkin cable easy transfer (FU279) on my old laptop with Windows XP Home Edition you are trying to transfer my files from my old computer laptop w/Win XP on a new computer laptop w/Win 7. This record is for the Windows XP upgrade to Windows 7 and transfer the files.

    I want to thank all in advance for your answers.

    Nelson Santiago

    Hi NELSONSANTIAGO,

    1. when exactly you receive the error message?

    2. is the Belkin easy transfer cable recognized by the Windows XP computer?

    This file may be located on the Belkin Easy Transfer Cable installation disc.

    For more information on how to use or configure the Belkin Easy Transfer cable in Windows XP, see the link below the manual on the Belkin site and check if that helps.

    http://en-UK-support.Belkin.com/app/product/detail/p/4825

  • Need help with the settings of the firewall for Firefox

    My wireless connection is fine, but all of a sudden my mozilla firefox browser cannot connect to Web sites. I can connect using another browser. Looks like I need to change the firewall settings, but I don't know how. How can I distribute my browser to work again? Don't know what happened to start blocking it, but it just happened some time this morning.

    Hi Tara,

    You can check the link and follow the steps and check if this may help;

    Configure the firewall so that Firefox can access the Internet

    http://support.Mozilla.org/en-us/KB/configure-firewalls-so-Firefox-can-access-Internet

    Is has problems, I suggest you to contact the Mozilla Firefox support,.

    http://support.Mozilla.org/en-us/products/Firefox

    If you need help with Windows, please do not hesitate to post. We will be happy to help you.

  • Need help with setting up in checkbox in interactive reports

    I need help with setting up in checkbox in interactive reports, I use this statement a query

    SELECT apex_item.checkbox

    (

    1, ROLEID,

    'onchange = "spCheckChange (this);". ',

    : F_ROLEID_LIST,.

    ':'

    ), del.

    ROLEID, ROLEDESCRIPTION

    OF EBA_ROLES

    When I run it I get the following

    < input type = "checkbox" name = "f01" value = "1" onchange = "spCheckChange (this); ' / > instead of the checkbox

    Do I need to configure anything else

    Aditya Gupta wrote:

    I need help with setting up in checkbox in interactive reports, I use this statement a query

    SELECT apex_item.checkbox

    (

    1, ROLEID,

    'onchange = "spCheckChange (this);". ',

    : F_ROLEID_LIST,.

    ':'

    ), del.

    ROLEID, ROLEDESCRIPTION

    OF EBA_ROLES

    When I run it I get the following

    instead of the checkbox

    Do I need to configure anything else

    This is one of the most frequently asked questions in this forum. Set the column attribute the text to display as Standard report column and not display text (special escape characters).


    Always include the information referred to in these guidelines when you ask a question and if you use APEX 5.0, State, if you develop using the pages or the view of the component designer.

  • I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

    I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

    Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

    If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

  • Need help with the data storage store, local array and network connections

    Need help with my ESXi 4.1 installation

    My hardware:

    I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

    The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

    I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

    My Situation:

    I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

    Help with the data store and network:

    I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

    I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

    Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

    I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

    Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

    You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

    Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

    RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

    You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

    Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

    UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

  • Need help with PL/SQL query complex

    I need help with a query that need access to data from 3 tables. That's what I did

    I created 3 tables

    CREATE TABLE post_table
    (
    post_id varchar (20),
    datepost DATE,
    KEY (post_id) elementary SCHOOL
    ) ;

    CREATE TABLE topic
    (
    TOPIC_ID varchar (20),
    name varchar (20),
    PRIMARY KEY (topic_id)
    );

    CREATE TABLE blogpost_table
    (
    TOPIC_ID varchar (20),
    post_id varchar (20),
    PRIMARY KEY (topic_id, post_id);
    FOREIGN KEY (topic_id) REFERENCES topic (topic_id) ON DELETE CASCADE,
    FOREIGN KEY (post_id) REFERENCES post_table (post_id) ON DELETE CASCADE
    );


    Now, I inserted a few values in these tables as

    INSERT INTO post_table VALUES ('p1', to_date ('2009-09-14 18:00 "," MM/DD/YYYY mi:ss'));))
    INSERT INTO post_table VALUES ('p2', to_date ('2009-07-18 18:00 "," MM/DD/YYYY mi:ss'));))
    INSERT INTO post_table VALUES ('p3', to_date ('2009-07-11 18:00 "," MM/DD/YYYY mi:ss'));))
    INSERT INTO post_table VALUES ('p4', to_date ('2009-03-11 18:00 "," MM/DD/YYYY mi:ss'));))
    INSERT INTO post_table VALUES ('p5', to_date ('2009-07-13 18:00 "," MM/DD/YYYY mi:ss'));))
    INSERT INTO post_table VALUES ('p6', to_date ('2009-06-12 18:00 "," MM/DD/YYYY mi:ss'));))
    INSERT INTO post_table VALUES ('p7', to_date ('2009-07-11 18:00 "," MM/DD/YYYY mi:ss'));))

    INSERT INTO VALUES subject ("t1", "baseball");
    INSERT INTO category VALUES ('t2', 'football');

    INSERT INTO blogpost_table VALUES ("t1", "p1");
    INSERT INTO blogpost_table VALUES ('t1', 'p3');
    INSERT INTO blogpost_table VALUES ("t1", "p4");
    INSERT INTO blogpost_table VALUES ('t1', 'p5');
    INSERT INTO blogpost_table VALUES ('t2', 'p2');
    INSERT INTO blogpost_table VALUES ('t2', 'p6');
    INSERT INTO blogpost_table VALUES ("t2", "p7");


    I'm launching SQL queries on the table in this topic.

    I want to write a SQL query that returns me the name of a topic (s) and the number of blog_post (s) associated with the topic in descending order of the number of blog posts created in July.

    Can someone please help me to write this query?

    Thank you

    Published by: user11994430 on October 9, 2009 07:24

    Thanks for the test of the configuration!

    SQL>SELECT   t.NAME, COUNT(*)
      2      FROM topic t, blogpost_table b, post_table p
      3     WHERE b.topic_id = t.topic_id
      4       AND p.post_id = b.post_id
      5       AND p.datepost >= DATE '2009-07-01'
      6       AND p.datepost < DATE '2009-08-01'
      7  GROUP BY t.NAME
      8  ORDER BY COUNT(*) desc;
    
    NAME                   COUNT(*)
    -------------------- ----------
    baseball                      2
    soccer                        2
    

    HTH, Urs

  • I'm suddenly needing help with my browser Firefox (6.0.2)

    Hello
    I'm suddenly needing help with my browser Firefox (6.0.2)

    (OS: I use Windows XP).

    When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

    I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

    This problem started today, September 8, 2011 and has never happened before.

    Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

    I also noticed that just before I "opened" Firefox, I now get a small box indicating:

    [JAVASCRIPT APPLICATION]
    Handl exc in Ev: TypeError: this oRoot.enable is not a function

    This never appeared before - I hope that it offers a clue has what is wrong.

    The browser not be stuck in Mode safe, said by the way.

    Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
    (A friend sends this request in my name from their pc)

    Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

    If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
    In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

    Thanks in advance.

    One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Need help with installation on Photosmart C7280 all-in-one

    I had my printer is installed and has been using the printer for 3 wireless laptops in my house.  Now, I can't even find my backup drive, so I have need help with downloading the software to use my printer and also get to use wireless.   I don't know what happened, but the fax for this printer is listed, but not the printer itself.   Help, please!

    Click here to download the software for your printer:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204785 & LC = on & CC = US & DLC = in & lang = to & CC = US

    has chosen the appropriate operating system that corresponds to your computer and download the full software features.

Maybe you are looking for