33.1.1 (or earlier version) Firefox makes the larger fonts on the site BBC.co.uk/news and is not update local weather by day - both work OK with Chrome
No other site does seem to be affected by this anomaly - I was about to condemn the BBC when I noticed that it was using Chrome.
The local weather update did not work for a few months now - the question of the police is on the last two weeks.
Hello, try pressing ctrl + 0 ("zero") while you are on the page to restore the zoom level or where it does not browse other troubleshooting procedures common to the Web sites look bad or appear differently than they should.
Tags: Firefox
Similar Questions
-
I meet a few sites that do not support Safari so I need to download Firefox. But I use Mac OS 10.5.8 and so I need an earlier version than is available for download on your site. Can you help me?
All of the previous version are sorted here:
Versions of Firefox everything
However, I think that your OS is supported, too. Check here:
IMPORTANT NOTE: Remember that the previous versions have security problems. The latest security updates, you MUST upgrade to the latest version. That's what I would recommend. Thank you!
Don't forget to hit "resolved." -
What is happening with the site. ? On Safari and Firefox, the pages to download the free trial version, or purchase happen as white?
You can also download the trial version of the software through the page linked below
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly. -
How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?
Keep all the files on external hard drive image? Nothing else and no pictures on the desktop?
Keep all image files both places?
What is the best way to go through thousands of images in the Organizer to identify and place them in files?
Once I've placed a file, I just leave it in the entire catalog or a way indicate to me that it has been sorted?
As overwhelming, any tips/shortcuts/schemes, you can offer are welcome!
As I only have the version of the EP, here is some info on the organiser:
https://helpx.Adobe.com/Photoshop-elements/how-to/use-elements-Organizer.html
Independent of how this feature works, you want to have your photos in one place and have a backup (second copy) somewhere else. All hard drives will not be successful at some point - some more early, some late - never trust to have your files in any safety devices if they are on a single disc. Once you have your sorted, it would be useful that you will organize/name/tag new photos immediately if the task is relatively short and simple. I copy my photos on my internal hard drive for my camera, take a quick look with preview to see who needs some changes and then decide where to put them - either drop them immediately after naming them or bring in an editing application and then file them away.
-
Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?
Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...
-
I installed the new version of LIghtroom (2015) compared to the creative clouds. Creative cloud said that I installed the new version. However, the shortcut icon that has been installed does not start the new version. I also went on the link properties itself, but without success in starting. How to launch the new version?
Thank you, toinimj59. I did this part and the installation is complete (there is apparently not earlier--included an acceptance of the general terms and conditions...)
Solution 1: Disconnect from the desktop creative cloud app and reconnect
- Disconnect from and to, the app Office creative Cloud click here for instructions to return in
- Launch of Lightroom.
-
Firefox prevented the site of the opening of the pop up how do I open?
On a Japanese site, I got this message
"Firefox prevented the site opening pop up.The identity button (grey Globe). See attached screenshot
I wonder how I could open web page even if the identity button is dimmed.
Any help in this regard will be appreciated.
Thank you
Said ArtMark
Have you tried to add the address to the list of exceptions FF popup blocker?
Paste (without the quotes) "subject: preferences #content" in the url bar and press ENTER
Click on the "Exceptions" button... »
type/paste the address of the page, click on leave and then save the changes.reload the page
pop-up windows should not be blocked on the page that you have added to the exceptions list.
Hello, I followed your advice, and now the site could be opened.
Thank you for your help. -
Is it possible to make the back to Pentecost iPhone 6 and Air iPad
Is it possible to make the back to Pentecost iPhone 6 and Air iPad
You cannot back up an iPhone to an iPad or vice versa, but you can save them both to a computer via iTunes or you can backup to iCloud. See: How to back up your device using iCloud or iTunes - Apple Support
You can also synchronize contacts, photos, etc. between the iPhone and the iPad. See settings > iCloud on each device for things that you can synchronize.
-
Does anyone know how to make the site in different languages?
Does anyone know how to make the web in different languages? and how to make the menu appear on the master page in the target language?
Hello
You must create the page content in languages that you want and then bind using the options in the subfolder on root of the hosting platform.
More details:
http://forums.Adobe.com/message/6065652#6065652#6065652
For the menu, you need to create different masters, and then apply on the pages.
Thank you
Sanjit
-
I use the secure identity with Explorer, and I was able to use it with an earlier version of Firefox that I had downloaded.
You can download the previous version at this url:
http://www.Mozilla.com/en-us/Firefox/all-older.html
Use Add and remove programs control panel to uninstall FF4. Then reinstall FF36.
-
Firefox is not updated as it should, so I'm stuck with an older version.
The automatic updates worked fine until April 2013. I updated to Firefox 24. When I click on Firefox, it says "Firefox 20.0...". Firefox is updated"- but he's not, I want the latest version. How to do it? Thank you.
Hello squid88, if you have a problem with the update of firefox, the best way is to download and install the new version, as good mixalis88 said in his response.
1. download a copy of the latest http://www.mozilla.org/en-US/firefox/all.html firefox
2. Trash , install the current application of Firefox to do a cleaning.
3. install the version you downloaded.
Do not select to delete your personal data, your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks or other personal data.
See also: Installation of Firefox on Mac
Thank you
-
When I hover over a link, Firefox adds the site before my link makes it bad.
I was check the compatibility of my site. So I opened http://www.sethermal.com. It was fine until I flew over a link. Firefox has added the site and broke the link.
For example.
I entered the address bar www.sethermal.com . The site came fine.
I hover over the 'Site Map' link on my page. Link is http://www.sethermal.com/pages/site-map.html
Before clicking on the link, I looked down and Firefox shows www.sethermal.com/-www.sethermal.com\pages\site-map.html
When I click on the link of course I 404 page not foundWhy is this happening?
These links have a backslash instead of a slash.
Firefox is not so forgiving as other browsers and treats a backslash as a character valid and thus prefixes links with the URL of the page.[1] <a href="http:\\www.sethermal.com\index.html"> [2] <a href="http:\\www.sethermal.com\pages\service.html"> [3] <a href="http:\\www.sethermal.com\pages\about-us.html"> [4] <a href="http:\\www.sethermal.com\pages\contact-us.html"> [5] <a href="http:\\www.sethermal.com\pages\site-map.html"> [6] <a href="http:\\www.sethermal.com\pages\products\Application\application.html"> [7] <a href="http:\\www.sethermal.com\pages\products\IndustrialHeaters\industrial-heaters.html"> [8] <a href="http:\\www.sethermal.com\pages\products\ComponentHeaters\component-heaters.html"> [9] <a href="http:\\www.sethermal.com\pages\products\ProcessControls\process-controls.html"> [10] <a href="http:\\www.sethermal.com\pages\products\PackagedProducts\packaged-products.html"> [11] <a href="http:\\www.sethermal.com\pages\products\HeatExchangers\heat-exchangers.html"> [12] <a href="http:\\www.sethermal.com\pages\products\ColdWeatherProducts\cold-weather-products.html"> [13] <a href="http:\\www.sethermal.com\pages\products\Sensors\sensors.html"> [14] <a href="http:\\www.sethermal.com\pages\resources\engineering-data.html"> [15] <a href="http:\\www.sethermal.com\pages\resources\industry-application.html"> [16] <a href="http:\\www.sethermal.com\pages\stsnews\sts-news.html"> [17] <a href="http:\\www.sethermal.com\pages\stsnews\hot-products.html">
-
Firefox blocks https://addons.mozilla.org/firefox/downloads/file/193648/super_start-3.4.4b-fx.xpi * how it to make?
Why do you think this very old version of the Super Start extension?
The super_start - 3.6.4 b - fx.xpi, on the site of modules is a very old and unsigned version on the dev channel.
Better would be to upgrade to the current version (great start 7.3.3.1).
-
who was the last version to allow the opening links in a new window by default?
Used to have the opportunity to set as default, when I clicked on a link, it would always open in a new window. I want to revert to this version... If it is supported or not! I HATE THE TABS!
You can disable tabbed browsing in the options:
Orange Firefox button or classic menu Tools > Options > tabs
Uncheck the boxes of the first and the fourth. This will restore the default behavior for links, which is:
- If a 'target' is defined in the link, or launch a new window or replace the contents of the existing window with the same target.
- If a script is triggered when you click on the link, leave the script to open a new window.
- Otherwise, follow the link in the same window.
-
Initially, I downloaded the trial version, then bought a paper copy at my college, and registration just CD-key that was in the box. For the life of me, I can't find this cd and box. When I downloaded the trial completes, I only downloaded the 64 bit and I want / need to 32 bit for some of the options that are not available to 32-bit. Is there a way I can download a 32-bit version through the site.
Now the option to download on the site brings me to a page broken with just a list of links which make it difficult to go in the right direction.
I don't mind installing a trial and put in my key. But I have a question about it. If I install the 32-bit version on the same computer, I installed the 64-bit version, which will suck to the top of my 'up to two installed"I get with the key?
SOM help would be appreciated.
D.D.
Direct download links for Adobe software
Mylenium
Maybe you are looking for
-
Impossible to format USB drive in XP
I use XP and you want to upgrade to the new version of RAW Therapee (an image editor). This program needs 4 GB of RAM. I was hoping to get it temporarily via a flash used as RAM additional drive. My new 8 GB flash disk is not reformatted on my XP. An
-
process media information now an hour, nothing don't exchange is not processing information
When I try to use the media to process information, it starts the process, but an hour later its still on 0% treated, and if you try to change the album information, he will find the information of the album properly, and the songs on the album, but
-
Windows update error 8000b 0100 need help serious
I have a x83vb from asus with WinVista SP1 64-bit and every time I have try to launch an update that it gives me Windows update error 8000b 0100 and ive tried system, Ive update readiness tool used the fixit now normal and aggressive, ive run manual
-
A directional VPN tunnel for SQL
I need to create a tunnel on my hub Cisco 3005 the firewall to the client. The sole purpose for the tunnel is to send only traffic SQL (port 1521) of my site from a customer and not in the other direction. For safety reasons, all other traffic should
-
problem of SCROLL key or touch When using my touchpad on my toshiba laptop, win7, a type of scroll box appears no - where and moving, my cursor on the desktop. He mess to the top of my page. If I scroll, I'll use the cursor down or on either side,