When you use my touch pad, a type of scroll box appears no - where and moves, my cursor on the desktop.

Similar Questions

• When you use ryainair site I can't book flights that claims security letters and numbers to go further.

  When you use ryainair site I can't book flights that claims security letters and numbers to go further. The letters and the amendments are not seen and in its place and wrote automated programs can be the cause of the problem.  Can you help me?

  Hello
   
  See the link below and follow the steps
   
  Some sites Web may not behave as expected in Internet Explorer
  http://support.Microsoft.com/kb/956197/ro
   
  If you still have questions, check with the support of the site ryainair.

• When you use a site a popup comes to know my system it attaches and it tells me that I have on my erros system what to do

  When I was a popup with a site came and said that I have error on my systen he had a scanner.

  He said that I had regestry errors are part of the microsoft.

  I did a scan of microsoftsafty who said that I had no virus.

  What to do from here.

  It is a false report to try to make you buy a product, you do not need.  If the pop-up window is displayed only on a single site or multiple sites, ignore him.  If it appears on several or most sites you visit, use a product such as Malwarebytes and Spybot Search and Destroy to scan your system for adware or spyware unwanted programs.

• When you use "cmd + click link" to open a link from Gmail in a new tab - tab opens in the foreground the background square.

  When I receive links sent in Gmail and I want to view them I usually 'Press cmd + click on the link' Open link in a new window. When I do that in Gmail it opens as a foreground tab, even if my default action is to open in the background.

  This is not the case in Hotmail or other site - just for Gmail. If I right click and open in new tab, then it opens correctly in a background tab but I wish that this action using 'cmd + click' if possible.

  What is the value of the browser.tabs.loadDivertedInBackground pref?

  • http://KB.mozillazine.org/about:config

• When you use Roland FC300 footswitch to control the transport, all the USB keyboard midi notes do not reach the logic. No help available on this?

  When you use Roland FC300 footswitch to control transport LOGIC, all midi keyboard USB (UMA25s) notes do not reach the logic.

  They are visible using MIDI Monitor s/w so reach the OS X - but do not make SENSE.

  I tried the function of the environment of the logic and the double check OS X Midi Setup but no difference statistically.

  I would appreciate any help on how to proceed.

  Thank you

  Paddy

  I do not understand your post. Your use the FC300 to control logic - how is it connected?   Is it plugged into the keyboard via middle or did you connect to logic directly via a midi interface?  (sense are the keyboard and the FC300 connected independently.

  When you say midi notes reached illogical (those transmitted by the FC300 or those via the USB keyboard do you mean?).

  First thing to do is to circumvent the control surfaces to exclude...

  Then, the control screen the custom value and see if data midi reached logical... If his hitting the midi monitor 99.9% sure it is hitting logic.

• ORA-01403: no given available problem when you use FETCH of AUTOMATIC LINE to fill

  ORA-01403: no given available problem when you use FETCH of AUTOMATIC LINE to fill out a form.
  
  1) has created a FORM on the use of assistants of EMP. This creates an AUTOMATIC FETCH of LINE
  NAME OF THE TABLE - EMP
  The PRIMARY KEY containing - P2099_EMPNO point
  Primary key column - EMPNO
  
  By default, automatic extraction has a "process Error Message' of"Unable to fetch line."
  
  (2) created an HTML region. In this region add
  text P2099_FIND_EMPNO element
  GET_EMP submit button
  The update branch the conditional branch created when the Create button to set P2099_EMPNO with & P2099_FIND_EMPNO.
  
  If I then turn the page, enter an employee in P2099_EMPNO number and press the GET_EMP button, the form is filled correctly. But if I get an employee who does not exist, then I get error oracle ORA-01403: no data found and no form but a message at the top of the page 'Action transformed '. I was expecting a blank form is displayed with the message 'Could not extract line.'
  
  In conditioning automated extraction so that it checks that the line exists first, I can work around that. Change the fetch EMP automated line so that it is conditional
  EXIST (SQL query returns at least one row)
  
  Select 'x '.
  from EMP
  where EMPNO =: P2099_EMPNO
  
  
  But this means that when the employee exists I must be get DB twice, once to the State, and then again for the extraction of the actual line.
  
  I can't change so I don't get the Oracle error, rather than work around for a above is there something? I wonder now if the automatic extraction of line is only supposed to be used when you bind a report to a form and that I should manually write the extraction process. The reason for which I don't have at the moment, it is that I'm trying to stick with the auto generation Assistant as I can.
  
  Any ideas?
  
  Thanks, Pete

  Pete:

  The process Assistant APEX (ARF, ARP etc) errors are generally not recoverable. The error encountered is simply displayed on a page by using the model of "Error Message. So as you said yourself, you create your own process line Fetch and have the opportunity to customize the management mistakes, or you paste a validation on the page to verify that a folder can be accessed for the views expressed.

  CITY

• When you use the touch pad, the pointer would not move.

  Original title: arrow not laptop computer movingon

  When using the touchpad on my laptop the pointer would not move so I had to plug my mouse to use my laptop. Why the touchpad pointer stopworking?

  Hi Ron123,

  1 Windows operating system you are using?

  2. What is the brand and model of your laptop?

  3. This occurs when you use a particular application?

  4. When did you start to question?

  5. did you of recent changes to the computer?

  You can try to update the latest version of the Touchpad drivers from the manufacturer's website and check.

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• When you use Itunes on my Ipod Touch 5 generation, the Ipod is no longer automatically past from one song to another. This seems to be a novelty. There is a button on the RIGHT side of the upper third of the screen where you can choose options but go n0.

  When you use ITunes on my Ipod Touch 5 Gen, running IOS 9.2, he has recently stopped automatically switch a song on one album to another while listening to ITunes. I discovered a button with 3 points to the RIGHT side of each title of the song which, when typed gives a different options for example then played, add up to the next etc.. If you use these all this seems to get worse with more choices that appear. I know that sounds incredible, but I have owned several Ipods that I use just for listening to music. Mine is a 32 GB version that can store a large number of albums, most of which I bought and loaded into my Ipod. A few albums that I downloaded from ITunes. How can I get it from my Ipod to listen to music in the ITunes application without having to select one of the 55 options?

  See if the chapter of the music of the Manual:

  http://help.Apple.com/iPod-touch/9/#/iph3bd017b9

  Next:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  Unsync/delete all the music and Resync

  To remove all music go to settings > general > use > storage > storage management > music > tap Edit in the top-right, then press the sign less than all music

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

• How can I disable the mouse pad when you use a mouse plug-and-play?

  How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• When you use Word or Windows Mail my cursor to type goes in all directions without warning.

  When you use Word or Windows Mail my cursor to type goes in all directions without warning? What is the problem?

  Hi, the Dalesman,

  Using a laptop?  Make sure that your hand is not sweeping the touchpad while typing.

  HP Support document

  Troubleshooting of mouse - mouse cleaning details

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3432827&prodTypeId=12454&ObjectID=c00006616

  Good luck!

• When you use word, outlook or any application on the Web, when type 'w: it triggers the function Tab.

  I have a user within our organization with a strange problem.

  When you use word, outlook or any application on the Web, often his typewritten letter T triggers tab.
  As it is to type the tab get triggered when it hits the letter 'T' on the keyboard.
  To eradicate this incident I tried
  1. the new roaming and local profile.
  2 keyboard has changed.
  3. reimagee the machine.
  4 assigned a new machine with a new keyboard and mouse.
  5. checked for ease of access and found that it turned off.
  6 are there any keyboard shortcuts in MS word either.
  Any help will be appreciated.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

   

  Hope this information helps.

• ORA-00902 error invalid data type when you use CAST in the PL/SQL Package

  I'm getting ORA - 00902 Datatype not valid error when you use cast in getEmpValues (see code below) method in the package I created.
  I don't know what is the cause of the error. Any help would be appreciated
  
  
  
  CREATE OR REPLACE PACKAGE TEST. TEST_PKG AS
  
  ARRAY TYPE MyTableType IS NUMBER;
  TYPE REF_CURSOR IS REF CURSOR;
  
  FUNCTION str2tbl (p_str IN VARCHAR2)
  RETURN myTableType;
  
  PROCEDURE getContactValues (p_ParameterString IN VARCHAR2, p_Cursor1 to REF_CURSOR);
  
  END TEST_PKG;
  
  
  
  CREATE OR REPLACE PACKAGE BODY TEST. TEST_PKG AS
  
  FUNCTION str2tbl (p_str IN VARCHAR2)
  RETURN myTableType
  AS
  l_str LONG default p_str | ',';
  l_n NUMBER;
  myTableType l_data: = myTabletype();
  
  BEGIN
  LOOP
  
  l_n: = INSTR (l_str, ",");
  WHEN the OUTPUT (nvl(l_n,0) = 0);
  l_data.extend;
  l_data (l_data.count): = ltrim (rtrim (substr(l_str,1,l_n-1)));
  l_str: = substr (l_str, l_n + 1);
  END LOOP;
  L_data return;
  END;
  
  /*
  p_ParameterString is a string of the form 3, 6, 8, 9'
  */
  
  PROCEDURE getEmpValues (p_ParameterString IN VARCHAR2, p_Cursor1 to REF_CURSOR)
  AS
  
  
  BEGIN
  
  
  OPEN FOR P_Cursor1
  
  SELECT *.
  FROM EMP
  
  WHERE EMP_ID IN (SELECT *)
  OF THE (SELECT CAST (TEST.) (TEST_PKG.str2tbl (p_ParameterString) as myTableType) double)
  
  );
  END getEmpValues;
  
  END TEST_PKG;

  ARRAY TYPE MyTableType IS NUMBER;

  This type must be created outside of the package as a SQL type if it must be used in a select statement.

• Screen resolution/size changes when you use the touchpad

  Bought Probbok 4530 s. Win 7. I continue to have the screen/print resolutiom size change when you use the touch pad. The pointer seems to 'paste' and then when I move it, the screen get is much lower or higher. I continually have to type ctrl + or - to get the size of the screen back to the 'normal '. Is this something to do with the settings for the touchpad or pointer? Its driving me crazy...

  Bruce

  Hell, I think that this is it... Pinch Zoom! I have disabled that, as well as the "allow the theme change mouse pointers" on the pointers tab. I'm playing with it now, and it seems to have solved the problem. I'll let you know if this isn't... Thanks for the great help, Dragon fur!

• I improved my 5s IOS10 3 days and battery discharge excelerated standby, as well as when you use. I turned off notifications, as, other non when not in service. Which could operate in the background?

  I improved my 5s IOS10 3 days and battery discharge excelerated standby, as well as when you use. I turned off notifications, as, other non when not in service. Which could operate in the background?

  Hi mweedn!

  I understand that you see a reduction in the battery of your iPhone 5s after updating to iOS 10. It is important to be able to make full use of your iPhone! There are a few resources that can help.

  Before the resolution of the problem, were you able to view information using your battery on your iPhone? Here's how to check the amount of battery used by each application:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you answer, remember to let us know if you see all the apps with an abnormal amount of battery. See you soon!

• Typing strike-thru when you use Safari

  When you post a comment in a forum online when you use Safari (OSX 10.11.6) - is it possible to type a strike-thru on the existing text?

  ᵺ < like that?

  If Yes, go to your Safari menu bar and click Edit > Emoji & symbols and then strike through type, and then double-click the strike through.