3315 to SNS 3415 device migration

Similar Questions

• SNS-3415-K9: hardware device console login reset password

  We brought a hardware appliance for small server secure network for the Applications of the NAC & ACS ISE: SNS-3415-K9. After the initial Setup, we have forgotten the IP address and the password for this unit. I access console on the server, but I can not connect because I forgot the password.

  I access MMIC, but I have no idea to reset password to log in to the console.

  Please help me.

  You will need to start using the installation media of the product you are using (ACS or ISE). Once you have started, you will be presented with a list of options, which is to reset the password for the admin user.

  Javier Henderson

  Cisco Systems

• ACS 5.3 on SNS 3415

  Is anyone ACS 5.3 running on a server of SNS 3415.

  It seems that it is not a mixture supported, I wondered why?

  Hello

  When Cisco release 3415 SNS the current version of ACS was 5.4. Developers had to make a different code for this device, because it uses own software and is another type of server.

  5.3 ACS was never develop working on this server, that of why you can't use ACS 5.4 or higher.

  If you need help with anything which touches the ACS do not hesitate to contact me. I used to work in support of Cisco AAA.

  Kind regards

  Erdelgad

• ISE 1.2 SNS - 3415 NIC bonding / grouping

  Hello

  I installed the SNS-3415 with ISE 1.2 and I try to configure the nic redundnacy (team) modes for requests for authentication and not for the purpose of management.

  Tests have shown that when an interface has been disconnected all was lost and nobody of our internal users was authenticated by the node of the ISE.

  However when I unplugged the "second interface" (possibly inactive) nothing has happened which shows which is a useless interface

  My goal is to connect it to my twins basic switches and have a deployment of high availability.

  -J' have enough search the Web but I have not found any clear and precisely the document to say how this could be done.

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  THEMIS

  ISE 1.2 does not support grouping NETWORK adapters.  Especially on the devices.  There is a solution for the virtual machine using the ESXi host teaming network adapters so that it is transparent for the virtual machine.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• Impossible to ACS 5.4 to 5.5 on an SNS-3415-K9

  Hello

  I try to install one of my Cisco ACS 5.4.0.46 with patch 5-4-0-46-6 5.5.0.46 version on a Cisco SNS-3415-K9 to 5.8.1.4.

  I have already installed the fix for pre-upgrade sharp-PreUpgrade -CSCum04132- 5-4-0-46 - 0 to .tar .gpg such as recommended by Cisco.

  When I run the upgrade, the process remains in 'Launch Application Upgrade' such as mentioned in the attached screen shot.

  Any suggestion please?

  Best regards.

  According to me, it's because of the stored data that causing problem with upgrade.

  4951688 3868528 827572 /storeddata 83%
  / dev/map/smosvg-recvol

  When you applied the upgrade bundle, it gets initially storeddata rental stores. If it doesn't have enough space, upgrade will fail.

  In order to erase stored data, you must contact TAC.

  Concerning

  Gagan

  rate: if it helps!

• Redundant NIC ISE (SNS-3415-K9)

  Hi all.

  We can connect a SNS-3415-K9 (ISE) to VSS switches. We have a server (SNS-3415-K9) ise can be connected an interface (g1) to switch1 and an other interface (g2) at the switch2 for redundant and load balancing...

  Not in a link aggregation Group (LAG) or multichassi etherchannel as your question implies.

  You can use other ports Gigabit Ethernet beyond Gi0 but they each have a separate IP address. There are different ways you can use these and other restrictions as well (e.g. Admin PAN is restricted to the Gi0).

  The details are laid out in a table here:

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/2-0/installation_guide...

  There are a few Cisco Live presentations, you can look for some design scenarios. I highly recommend Craig Hyps BRKSEC-3699 ISE for scale and high availability design

  https://www.ciscolive.com/online/connect/sessionDetail.WW?SESSION_ID=837...

• What is the recommended size of repository to store saves the backups of ACS SNS-3415-K9, v5.4

  Hello guys, we need your advice :),

  do you know what is the recommended size of repository to store backups of logs of ACS SNS-3415-K9 (v5.4.0.46.0a software)?

  We intend to create an FTP server to record a monthly full backup and an incremental backup daily.

  We would like to consider the worst case in which ACS View Database is complete and a full backup is required and daily incremental backups.

  In the second period, we would appreciate really any advice on how to maintain, say, only the last 2 full backups and all the related incremental backups in the FTP server, is there a way to automate the removal of the oldest backup when a new backup is generated?

  Thanks in advance!

  Hi Rodrigo,

  Honestly, there is not a suggested size of space available to FTP/SFTP server used as the size of your backups of data base of progressive and complete view depend on 100% of the amount of newspapers ACS server receives every day, so what I would suggest to take a look at a couple of incremental for 2 consecutive days and would help you to determine what would be the amount that you need for a period of 30 days (one month).

  And associated with your concern if the ACS would supports the option to manually maintain the last 2 full backups view, unfortunately, it is not available as an option.

• You place your order of SNS-3415

  I ordered the SNS-3415 as ISE 1.1.4.

  I thought I have to install the ISE, however, it has been installed.

  but I don't know what is the ID/PW...

  No one knows about it?

  Hello

  You'll have to reimage, on a new installation, you should be presented with invites it installation.

  Tarik Admani
  * Please note the useful messages *.

• MTBF, MTTR SNS-3415 and TDS values

  Hi team,

  We would like to get the MTTR, MTBF and MDT to SNS-3415 values, kindly request expertise advise on that.

  Thank you

  Vishnu

  This information is not usually available to the public, you must contact the local team of the Cisco and ask them to receive the information for you.

• 1121 5.4 to 5.6 upgrade

  1121 is EOL, end of the sw-support was August 27, 2014. I'm 5-4-0-46-7 running on my device. I'm upgrading to version 5.5, and I read this post - https://supportforums.cisco.com/discussion/12076866/1121-upgrade-52-55. So I know that it is supported. But what about version 5.6? This Version is September 2014, according to the doc of Cisco, it is not supported for the device of 1121.

  The ACS 5.6 software runs on a device dedicated to Cisco SNS-3495, on a Cisco SNS-3415 device, on a Cisco Secure Access Control System (CSACS-1121) 1121 or on a VMware Server. 5.6 ACS comes on appliances Cisco SNS-3495 and Cisco SNS-3415. However, 5.6 ACS continues to support CSACS-1121 device. You can switch to 5.6 ACS from all previous versions of the ACS that runs on the device CSACS-1121. For more information on the upgrade paths, see upgrading Cisco Secure ACS software.

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_control_system/5-6/release/notes/acs_56_rn.html#40742

• Unable to find the required details for SNS-UCS-TPM in the datasheet as rack unit size

  Hello

  I'm just trying to understand the dimensions of the SNS-UCS-TPM device and the same power requirement...

  Is - this 1 U device with 1 x 650W PSU? I think details power but I'm not able to get the size details with respect to the width, length, and width.

  Can you please share the good link that will offer all of this in detail?

  The Trusted Platform Module (TPM) is a module of small integrated circuits on the new network of Secure Server (SNS) 3415 and 3495 device models. They are based on the platform Unified Computing System (UCS) C220 M3.

  Both the 3415 and 3495 have the same physical dimensions, differing only by the number of processors, memory and hard drives installed in their breast.

  The detailed characteristics of the UCS C220 M3 are here. You can see a diagram of where the TPM is installed here.

• Cisco ise license command

  I have a question

  1. is it possible to install the Cisco ISE software on the server machine to physical HP (without solution VMware or without the use of SNS-3415-k9 cisco device)?

  2. for 2500 users online, I'll order L-ISE-BSE-2550, L-ISE-PLS-S-2500 and L-ISE-APX-S-2500 of basis, more and apex licenses. My question is HA (primary and secondary) application I need 2 licenses for each? (2 * L - ISE - BSE - 2550, 2 * L - ISE - PLS - S - 2500 and 2 * L - ISE - APX - S - 2500)

  or just a license for each is enough?

  3. If I implement Cisco ISE and HA on VMware environment, can I 2 L-ISE-VM-K9 licenses for each VM machines? and also I need 2 licenses for each basic, plus, and at the apex?

  4. What is smart net Cisco and Cisco SASU? need to buy these for support and ticketing system?

  5. What is license for cisco anyconnect (L-AC-APX-1 year-G)?

  thnx in adv.

  You can install ISE on a HP ONLY Server if you are using software virtualization (VMware or KVM).

  The Guide of Installation of ISE sets out three options:

  1 hardware appliance from cisco SNS

  2. virtual machine VMware

  3 Linux KVM.

  The AnyConnect license is required to qualify with the features of the Apex. It is not installed on the ISE server, however.

• Question of ISE MAB

  Hello

  I am working currently on the site and I did facing Aproblem with mac authentication bypass,

  I work with on ISE SNS-3415-K9, version 2.0.0.306, active deployment mode / standby.

  The ISE do profiling through snmp and DHCP messages.

  in most of the switches of MAB is working properly,

  but unfortunately I faced a problem in some switches.

  > the ISE cannot discover the mac of an endpoint, then the failure of MAB, same I enter the MAC address of endpoint manually, the GCC has failed.

  Please check the following configuration on the switch

  IP http server
  IP http secure server

  analysis of IP device

  logging of the EMP
  logging Source ip id

  control-dot1x system-auth

  Group AAA dot1x default authentication RADIUS
  Group AAA authorization network default RADIUS
  Group AAA authorization auth-proxy default RADIUS
  start-stop radius group AAA accounting dot1x default
  accounting AAA periodic update 5
  !
  accounting AAA periodic update 5
  start-stop radius group AAA accounting system by default
  !
  AAA server RADIUS Dynamics-author
  Client 10.255.255.13 server-key [email protected]/ * /.
  Client 10.255.255.14 server-key [email protected]/ * /.

  RADIUS attribute 6 sur-pour-login-auth server
  No server radius attribute 8 include-in-access-req
  No radius attribute 25-application access server include
  No dead-criteria time radius server 120 tries 10

  No radius key [email protected]server *.
  no host 10.255.255.13 radius server auth-port 1812 acct-port 1813
  no host 10.255.255.14 radius server auth-port 1812 acct-port 1813
  No 10.255.255.13 radius server host doesn't test username ise_probe-idle time 30
  No 10.255.255.14 radius server host doesn't test username ise_probe-idle time 30

  No radius vsa server send accounting
  No radius vsa server send authentication

  No radius source-interface vlan300 ip

  No dot1x-auth-control system

  no host 10.255.255.13 record transport udp port 20514
  host 10.255.255.14 record transport udp port 20514

  SNMP-server host 10.255.255.14 [email protected]version *.
  SNMP-server host 10.255.255.13 [email protected]version *.

  interface GigabitEthernet0/2

  switchport
  switchport mode access
  stream of host-authentication mode
  authentication order mab
  authentication priority mab
  Auto control of the port of authentication
  periodic authentication
  Server to authenticate again authentication timer
  MAB
  end

  > Also, when I open the RADIUS log file, an authentication failure message appear even I manually insert the MAC.

  Please note the ise probe in the user name field

  Please check the attached screenshots

  @pieterh

  The number before the commands is rolled by accident.

• ISE 1.3 Distributed environment

  Hi all

  in a network with two main campuses and 10 remote with total scheme 3000 offices, to implement Cisco Ise distributed 1.3, we want to buy 2 camera SNS-3415-K9 for synchronization of monitoring/management/policy and 10 VM for node of sevice of strategy, but we found in distributed environment, to a pair of nodes of posture inline, we buy another two device or VM for inline posture?

  Well, it has not been officially said by Cisco, but it's already been removed working on the SNS.3495, so I would say that this isn't something that we should design the new ISE solution with.

  No, the secondary PAN/MNT will handle the same as main Ssnp, you cannot split your PSN between nodes of PAN/MNT.

  "you're telling me that if a remote office fails, lose psn...?

  Don't know what you're asking?

• What do I have to apply RADIUS server?

  We intend to implement server GANYMEDE +.

  I need to know what exactly I need to set up this server? what I have to buy GANYMEDE + appliance based provider or I can just buy the software and install it on one of my new or existing server. is there any software to open source very good that I can use? What advantages and disadvantages of each options?

  I'm the management of hundreds of routers and switches on our society and on customer sites via internet.

  one last question: is Cisco ACS 5.5 material or can be installed in any server?

  I know it's very long or issues, but I know that you are very friendly and nice people :)

  1.] most of the large company or class operator network device manufacturers supported by GANYMEDE. Some providers that are supported on the GANYMEDE Protocol + are: Adtran, Alcatel/Lucent, Arbor, Aruba, Brocade/Foundry, Cisco/Linksys, Ericsson/Redback, Extreme, Fortinet, HP/3Com, Huawei, Juniper, Netgear, Nortel and others. However, I personally would say ACS 5.x

  Source - http://tacacs.net/faq.asp

  2.] cisco Secure ACS 5.5 is available as a closed and hardened based on Linux SNS 3415/3495 device or as an image for VMware ESX/ESXi 5.0/5.1operating system.

  Cisco Secure ACS 5.5 supports two distinct protocols for authentication, authorization and accounting (AAA): RADIUS access control network and GANYMEDE + to access network device control.

  3.] for more information about the product and the license, you must go through the links listed below.

  Order ACS 5.5 Guide

  Data sheet ACS 5.5

  Kind regards

  Jatin kone

  * Does the rate of useful messages *.