diditbox.ocx error 339
This error was coming, can help you.
Hi grjmmr1,
Here are some generic information about error 339: http://www.runtimeerrorsfix.com/what-is-runtime-error-339.html. In essence, there is some kind of problem with the program that uses diditbox.ocx or this file is missing, lost, corrupted, or deleted (which I could find nothing about anywhere).
When the error appear? Please post the error message Word for Word accurate and complete including all codes. What program you trying to use or help when it occurs? It prevents you from doing something or effects you notice when it happens? Does it occur rarely or often or always at startup or is there any model you can identify? Which Windows operating system you use (e.g., 32-bit Vista Business SP2)? Have you recently installed new programs or since this started? -who would be the likely causes of the problem.
We will check some of your system files:
Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.
, Type sfc/scannow go and let it run. It will scan and try to the difficulty of some of your system files. If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228. It can include more information on this file.
While in the command prompt, type chkdsk /f /r and enter and let it run. They tried to set itself to run at the next reboot. Answer Yes and restart to run the program. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.
If this does not work, then please post the Event Viewer error messages about diditbox.ocx (Start / Control Panel / administrative tools / Event Viewer). Look in the sections of the system and applications.
If this does not work, try a boot minimum http://support.microsoft.com/kb/929135. If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem. Follow the procedures described in the article. Once found, remove, delete, disable or uninstall. Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.
Start in safe mode with network and see if the problem is here. A result allows us to narrow down the search for the cause.
Do you know when this problem started? Try a system restore to a point in time BEFORE the problem started. If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html. If the first attempt fails, then try an earlier point or two. NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.
It is possible, that it is malware. Update and run a scan complete with your current security software. If you do not have because they can help, try the following programs. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx.
Perform a full search on your computer (a complete advanced search of all of the computer in Vista and Windows 7) for diditbox.ocx see if you can find it and from there to identify what it is associated (possibly by the record, it's in its properties, or everything you can find about it). If we can identify the program, we will be more closer to finding the cause and possibly a solution.
I hope this helps. If this isn't the case, please answer my questions above and also include the results of what you have tried in your next reply. We will have to examine more deeply the possibility of infection, or that the information you provide may give us a clue on what to try next.
Good luck!
Tags: Windows
Similar Questions
-
get the runtime error 339; missing or invalid Mscomctl.ocx
Running windows7. Get the runtime error 339; Mscomctl.ocx missing or invalid when you try to print from softward program
Nothing worked until I tried the
http://www.Ascentive.com/support/New/libraryfiles.exe
that was suggested a thread earlier. I don't understand what this does, but WOW. Solved the problem and the lack of file is back on my computer.
Thanks a lot for the idea. Program works well now.
-
Run time Error 339 MSDATGRD.ocx missing
In VB6 Application when started short runtime error 339
Hello
The error 339 is related to missing or corrupted .dll or .ocx files. You should be able to re - register the MSDATGRD.ocx file to fix error 339 questions.
a. click Startand then click run.
(b) in the Open box, type cmdand then click OK.
c. at the command prompt, type the following lines, and press ENTER.
regsvr32 MSDATGRD. OCX
d. a confirmation message is displayed if the registration was successful.
e. restart your computer to ensure that the changes take effect.
-
runtime error 339 comdlg32.ocx
I use Win XP, make error 339 comdlg32.ocx
I want the solution for thisHello
1 how long have you been faced with this problem?
2. don't you make changes on the computer before this problem?
3. What is the exact error message?
4. when exactly you get this error message?Reregister the file comdlg32.ocx from an elevated command prompt and verify.
1. open an administrator command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.
2 type each of the following commands at the command prompt and press ENTER after each command:
regsvr32 /u Comdlg32.ocx
regsvr32 /i Comdlg32.ocx
-
Runtime Error 339 PROGRESSBAR4. OCX missing or invalid file
Running Windows Vista Home Premium.When, trying to open a program that ran previously OK, I get the following message:
Runtime Error 339:
Component "PROGRESSBAR4. OCX' or one of its dependencies is not correctly registered: a file is missing or invalid.
Hi Tony,.
Welcome to the Microsoft Community and thanks for posting the question.
According to the description, you receive a runtime error.
What program you are trying to open?
This problem may occur if the requested file is not registered.
a: Click on Start > programs > Accessories.
b: Right-click on command prompt and choose run as administrator.
c: Enter the following command in the command prompt window and press ENTER.regsvr32 c:\windows\system32\PROGRESSBAR4. OCX
Answer to us if you are having problems with opening or any other issue of Windows programs, and we would be happy to help you.
Good day!
Hope this information helps.
-
I recently downloaded a program, and when I try to run it, it shows this message: "runtime error 339: component GTGRPLST.» OCX or one of its dependencies not correctly registered: a file is missing or invalid. "I saw that someone had posted this question in the past and have followed the suggestions in the responses provided, but without success. Is there something else I can do?
I suggest you uninstall then reinstall the program and see if the GTGRPLST. OCX is loaded correctly.
Let us know.
-
Run Time Error '339' lack file comdlg32.ocx
I get this error message "execution error '339' COMDLg32.ocx or one of its dependencies is not correctly registered: a file is missing or invalid" I tried various troubleshooting tips from online but none worked. Any idea? Thank you!
(1) run the following command in administrative Mode
regsvr32 comdlg32.ocx?
You should see a message DllRegisterServer in successful comdlg32.ocx
Run you method 2 in post Satish?
(2) define the properties of the executable file of the Application, run as administrator
Right click on the .exe file
Select Properties
Click on the Compatibility tab
Under privilege level, click on run this program as an administrator
Click on apply, Ok
If the problem persists, look for errors in Event Viewer
See the solutions proposed in this thread:
-
As I upgraded fom Win 7Pro to Win 8 Pro I can't get one of my software programs work correctly, it worked fine on Win 7 Pro, I tried all sorts of internet remedys, but nothing works, I get the message following run-time error '339': 'mscomct2.ocx' or one of its dependenceies component is not properly registered : a file is missing or invalid.i have tried to get that it is running in compatibility mode, but the same error message keeps comeing. The software installs fine, can someone give me that any ideas how I can stop this error message and get my software to work, it's the only piece of software I use every day, but during the last three weeks, I have been unable to use frustrating it.very. Thanks You.Robert
A quick and simple solution to this problem.
Simply follow the instructions below, download the file, install it and bingo, you have sorted.
This will save you having to reinstall interactive Raceform, but you can do before a new installation if you wish.
Click on the link below (or copy and paste it into a browser address bar):
http://download.Microsoft.com/download/vfoxodbcdriver/install/6.1/W9XNT4/en-us/Vfpodbc.msi
If you do this in Google Chrome you will see this in the lower left corner of your screen-
Double-click this and you should now see this-Choose to runNow, you will see this-And it should now be as easy as just after the other, agree questions etc after clicking this first suite.This will allow you to install drivers for Visual FoxPro that will hopefully Raceform Interactive must be installed after that he completed. -
Comdlg32 and runtime error 339
FS2004 problem, you try to run the program flattex (a program that can flatten the ground and exclude a landscape by default FS2004, ex, trees, buildings, etc.) error message in the sense of non-registered or missing COMDGL32 or components etc... went on the net, found help comdlg32.ocx and comdlg32.dll, put it in the system32 folder and down command prompt with the following command: regsvr32% Systemroot%\System32\comdlg32.ocx, recorded the comdlg32.ocx but shows error runtime error 339 message and now I have no idea what to do. Help is appreciated, thanks.
-------------------
-
Hello
I get this message when you try to run a program.
Run-time error '339' race
Component "VSVIEW6. OCX' or one of its dependencies is not correctly registered: a file is missing or invalid.
Anyone know how to fix it so that the program will work?
Thank you
Jase
Hello Sophie,.
Thank you for keeping us posted.
No, the enforcement of Safe Mode & Clean Boot items are for the Windows XP operating system.
Here are the steps you can follow to accomplish the same thing:
Step 1: Start in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135
Note: Follow the section 'More information' to reset the computer to start as usual after a clean boot troubleshooting.
Please come back for any clarification on this or any issue of Windows. We will be happy to help you.
-
Hello. I have a problem you're trying to start my program I wrote long ago on VB6. When it is run, it displays an error message: "run-time error '339': component ' COMCTL32." "OCX' is not correctly registered: a file is missing or invalid. I searched "comctl32.ocx", but it doesn't seem to be anywhere in C:\Windows (including subfolders). Using this installation - first http://www.microsoft.com/en-us/download/details.aspx?id=10019 , then System File Checker do not solve the problem - the program still does not work and ' COMCTL32. OCX' is not found. What should I do?
Start here: http://msdn.microsoft.com/en-us/vstudio/ms788708
This link to the download for the execution time extended to http://support.microsoft.com/kb/957924
and
http://www.Microsoft.com/en-US/Download/details.aspx?ID=7030
-
Cannot open not Ultimate traffic, get code error 339. Impossible to uninstall the game
Original title:-Thei have traffc ultimate instald on my computer and when I go to open the program t gives me an error code 339 and trying to uninstall cant
the programe of flight sim is 2004 and the program works fine. Its the ultimate traffc giving code error 339
Hello
(1) operating system do you use?
(2) since when are you facing this problem?
(3) don't you make changes to the system?
(4) was this works much earlier?
The problem is caused by programs such as firewalls, anti-virus and Anti-Spyware software programs running at the time of installation. Please, close them and try to reinstall.Method 1: Perform a clean boot
Follow the steps in the link below to perform the clean boot.
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.
Check if the problem persists.
Method 2: Disable the security software / firewall
Temporarily disable all firewall and security software and check if the problem is fixed.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Enable them after you perform the troubleshooting steps.
It will be useful.
-
When I try to go in a part of a program, I get this error. How can I solve this problem?
Hello
Graph32.ocx is running VB file to display the chart control in a VB application. If the provider of the program does not provide this file to runtime, you can get it from Microsoft. Simply reinstall the VB runtime library should solve the problem.
VB runtimes:
-
Opening application TecBasic V for the second time and received this error. Why does this happen?
Umesh,
I did it. The MSCOMCTL. OCX file is in the SysWOW64 folder and not in the system32 folder.
Why this app would work one day and not the other?
That's what I have on my Windows 7 64-bit machine.
MSCOMCTL. OCX C:\Windows\System32 1 069 376 2009-12-19 14:28:16 2009-12-19 14:28:16 11/12/2010 09:52:54 an OCX
MSCOMCTL. OCX C:\Windows\SysWOW64 1 069 376 2009-12-19 14:28:16 2009-12-19 14:28:16 11/12/2010 09:52:54 an OCXWhy don't you try copying the file from one place to the other?
Some general things to try.
See if the system restore will go back you to a restore point before your problem with Explorer, OR try the System File Checker.
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
http://support.Microsoft.com/kb/936212/#appliesTo -
Runtime error '339' missing vbwExtender.ocx
[Windows Vista 32B SP2]First of all, Hello to all I'm new, this place looks very professional and I am pleased to join this place!I have this error of runtime for about a week on my brother's computer. It appears after the computer loads up. I guess that started since I installed BitDefender Free AV. During the first, everything would hang, program extensions and it is running. After I removed the AV error still exists when I load the system, but I can surf the web and do a casual job as before. It seems very similar to this error on a previous thread. So far I ran a registry via CCleaner cleaning and anything else again. I searched the web, and there are a lot of very similar and shady 'hacker-free' sites that offer a 5MB ~ 10 MB magic fix to my question! But I pass on those. I'm hoping to get a good manual correction of a pro. Thank you all in advance!
The thread I was referring to: ()Edit: well, I replaced the AV to MSE and disabled a few things on the restart and no more errors, I guess it's that?Yes, I disabled a program at startup in msconfig, just because I thought it was suspicious and I didn't know how to uninstall it. I also completely uninstalled the free AV. of BitDefender which resolved.
Maybe you are looking for
-
Addon shows the name but no icon in the window customize
I recently developed an add-on. However, once installed the icon does not show, but only the name of the addon in the window customize bar addon (or menu Australis).I have not seen this behavior in other addons, so I think it's probably something tha
-
Original location in a corrected image (using calibration data)
Hello I use the tool of vision to correct the distortion in images.I do not use the model grid point let the software generate the calibration sheet, but rather use a set of points (which I can define precisely in the distorted image) and provide the
-
Microsoft Wireless Keyboard 3000 v2.0. -I'm unable to locate any key refresh
I just installed a Microsoft Wireless Keyboard 3000 v2.0.Sadly I am unable to locate any key refresh and the key icon shown on 'aid' does not exist. Any input would be welcome, thank you.
-
HelloI can't update the audio driver on my PC. When you try to install the driver (new sound card), I get the following message is displayed:There was a problem installing this hardware: An error occurred during the installation of the device"The IO
-
unexpected error of game: Fable: The Lost Chapters
Original title: My Game - Fable: The Lost Chapters crashes just after the battle of the final set of blades is beat. I hit the last time, then its glitches head to watch my character, then I get an unexpected error in game. Ive tried just restart my