Cisco ise license command

Similar Questions

• VMWare Cisco ISE license

  I have a client with a Production ISE implementation which is fully licensed with the hardware appliances.

  They would like to add a single appliance VMWare as a node of additional political Services.

  Where in the course of the implementation of this node of VMware add the VM in ISE license?  The system already as the licenses for basic and advanced.

  Is this a type of honor based license given that the system is already allowed for the number of endpoints that require auxiliary?

  Mike Griego

  Virtual machine 'licence' is a license to honor based, it is never installed anywhere. Licenses like Basic, plus and apex are shared from node primary admin.

• Cisco ISE license file

  I want to save the license file to be applied to a new facility on the same hardware (3355). Is this possible? I tried to reset the configuration of the CLI and the license was excluded, it was necessary to do a restore.

  Read "re-hosting license."

  http://www.Cisco.com/c/en/us/products/collateral/security/identity-servi...

• Cisco ISE - alarm expired license demo

  Hello

  We are implementing Cisco ISE 1.2.0.899 and report alarm license expires. This alarm refers to the demo of Advanced license and is therefore a false positive.

  This issue is that we cannot delete the demo travel and stop the root cause of this false positive alert.

  Anyone have an idea?

  Thanks in advance.

  Kind regards

  Oliveira Telmo

  Please refer to the following discussion

  https://supportforums.Cisco.com/discussion/12059041/ISE-advanced-eval-Li...

• ISE license consumption and freeing licenses [RADIUS]

  Hi people EHT,.

  There are a lot of questions of ISE issued by me in the last time. And guess what - another here.

  I wonder how the ISE license consumption and freeing licenses actually works. At least I have not find any good document or post on it.

  From what I understand, a license (no matter if basic, plus, apex whatever) is consumed based on RADIUS accounting messages.

  Example:

  An endpoint is authenticating and allowed successfully with 802. 1 X without profiling or posture or whatever (simple). The ISE knows that this endpoint must use a base license and basic license consumption is increased by one.

  As soon as the client is disconnected from the network, the n (switch, WLC) sends an accounting stop message to the ISE and the ISE again releases the base license.

  (am I right so far?)

  Assuming that I am just using the example above:

  RADIUS is not say that really reliable. No matter that it uses UDP (which is unreliable), RAY has a mechanism of recognition built in (Accouting request / respone). But this mechanism gives up after a few attempts. Suppose that a client is disconnected, but the message of stop RADIUS is not received by the ISE.

  Fact the endpoint stay forever in the State of the current session and therefore to consume a license forever? (Assume that there is no timer of dot1x re-authentication).

  Or is it a mechanism of 'time-out' for endpoint licences?

  Kind of a side story here:

  I wrote a simple wrapper for the freeradius tool 'eapol_test '. Go Linux applications unique command line EAP (e.g., EAP - TLS) can be issued to a RADIUS server. If the Linux client acts as "supplicant" X 802.1 and authenticator. It's cool to quickly test the availability of the service of an authentication server.

  My simple wrapper for "eapol_test" performs a ping 'EAP' at the time of convergence of measurement and measurement of authentications per second in a lab environment. The wrapper can also change endpoint of each session of RAY MAC. When I do ping EAP in a laboratory of my number of licenses on the ISE exploded, because eapol_test does not deliver messages from accounting RADIUS to EHT :)

  Johannes has soon

  Hi Johannes-

  You're right about the consumption of license:

  Licenses are counted against concurrent, active sessions. An active session is one for which a RADIUS Accounting Start is received but RADIUS Accounting Stop has not yet been received.

  However, in addition to this:

  Note Sessions without RADIUS activity are automatically purged from Active Session list every 5 days or if the endpoint is deleted from the system. 

  This information used in the documentation of ISE 1.x, but for some reason, he is not :) in the 2.x here's the info from 1.2: http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/installation_guide/ise_ig/ise_app_d_man_license.pdf I hope this helps! Thank you for the useful job evaluation!

• Cisco ISE

  Hi all

  I intend to implement cisco ISE in my network. I have 1000 endpoints and some mobile devices. I plan to use approach distributed and all licenses possible.

  It is: should I buy licenses for all nodes. For example 1000 for the head node, 1000 for high school, 1000 for surveillance and so forth?

  Or should I buy license only 1000 (I mean 1000 base + 1000 advances + 100 mobile) ones and apply them to all nodes?

  Concerning

  Max

  Hi Max.

  ISE is authorized by the deployment. So if you have a distributed with us deployment will tell ISE 10 nodes or servers you will always only the node main Administrator license.

  Now, if you plan to have two deployments (say a deployment for the EMEA region and the other for APAC) then you would need licenses for both deployments (you allow the node primary admin in each deployment).

  I hope this makes sense :)

  Thank you for evaluating useful messages!

• Cisco ISE (Identity Services Engine) - seeds SGA device?

  Hello

  We have a LAB with Cisco ISE, certificates and list DACL. Everything works fine with the 1.1.1 version but now we want to use the functionality of CMS - SGT instead of the ACL and we found that we need seed for this device and the only device that takes in charge the Nexus 7000 is. Is this true? What is the only way that we can use LMS - SGT? Are there plans that any other device will be used to seed device?

  BR, Marko

  The device of seed set as first device that communicates with the ISE. It must be a link.

  http://www.Cisco.com/en/us/docs/solutions/enterprise/security/TrustSec_2.0/trustsec_2.0_dig.PDF

  In addition the Nexus needs a license of Advanced Services installed in order to support the Trustsec.

  I can't comment on any future plans.

• Upgrade to Cisco ISE

  Hello

  I have cisco ISE 1.0, which I want to spend 1.3 ISE. According to the upgrade path, I would need to follow this process

  1.0 > 1.1 (apply the latest patch) 1.2 > 1.3

  The bundle 1.0 to 1.1 is deferred. So I think to install a new 1.3 ISE as a virtual appliance and then configure it from there. I have not too clued up on ISE so I was wondering is there a way to backup on ISE 1.0 and 1.3 restoration?

  If this is not the case, what would be the best approach?

  Thank you

  Wow 1.0 to 1.4 is a big leap in functionality. You run this in your production network?

  Authentication and authorization should continue to work that you have configured the.

  On the top of my head

  -you come on duty return to the AD domain (if you have joined in the first place). Make sure you have the credentials of the service account to do.

  -Comments and other portals have been completely redesigned. If you have made any customizations, you're probably better it demolition and reconstruction by using the new tools of the portal generator.

  -Depending on whether you have advanced Base 1.0 licenses will take you through basic or Apex with 1.3 / 1.4.

  -ISE has a ton of other features that may or may not apply in your environment.

• Cisco Ise 1.3 with Flex to connect wireless supported function

  Hello

  My environment is formed ROUND of flex-mode connection wireless and cisco Ise 1.3, these features are supported?
  Basic functions of the AAA
  profiling
  posturing
  Substitution VLAN
  Substitution of the ACL
  Comments commissioning

  TrustSec 2.0 this MDC is not supported? someone try this feature?

  These all work with ISE 1.3 and FlexConnect WLAN.

  You need the right license ISE - the type of mobility (wireless) license will cover everything. If you have wired and wireless, then you must have basic (for most features) + more (for profiling) + Apex (for Posturing).

• Device failover ISE licenses

  I'm working on obtaining of license terms for ISE put in place for the next budget.

  I am confused about licenses for a unit of failover. Do we need to do another set of licenses for the unit of failover, or for the primary device licences will cover the failover?

  Hello

  Before ISE Release 1.2, clients may specify only the ISE licenses to be registered to a single node of the Administration of ISE (i.e., the main node of the Administration). Now, ISE Release 1.2 offers the possibility of recording licenses ISE to two nodes of Directors (i.e., the primary and secondary nodes of the Administration). The registration of licensed ISE on the head node of Administration required rest, but the option to save a secondary node of administration is available.

  Referral link,

  http://www.Cisco.com/c/en/us/products/collateral/security/identity-servi...

• New software from Cisco ISE 1.3 on IBM x 3250 series?

  Hi all

  I need clarification on these three questions:

  -Like the Cisco ISE 1.3 is released a few days ago, it is possible to install it on another provider of hardware as IBM x 3250 series?

  -If Yes, how we will manage with smartnet contract?

  -What the SNS ISE Accessory Kit contain exactly? in fact we build ISE solution and need to see if UCSC-RAIL1 = and N20-BKVM = already appear in ISE-SNS-ACCYKIT.

  Thks

  Jules

  1. you can install ISE on a server ESXi meets the hardware requirements. You cannot install it on a "bare metal" install 3rd party server. (At least in any way supported.) Reference.

  2. your software license allows you to press the software in a virtual environment. The material is handled between you and your seller's preferred material or support for the company.

  3. the rails and the KVM adapter should be included in the Accessory Kit.

• Cisco ISE to jailbroken or android block specific versions

  We have Cisco ISE deployed with advanced subscription license. Is it possible to block jailbroken IOS devices and devices with the old android OS version (or root) to join the wireless network.

  You can only do that with ISE. You will need to purchase a supported MDM solution (Airwatch, MobileIron, Extend360, etc.) and integrate with ISE. The MDM can then be queried by ISE and check for things like rooted device, PIN, encryption, etc.

  Thank you for evaluating useful messages!

• Cisco ISE CLI and GUI password expires

  I got Cisco ISE version 1.1 I am facing a problem with the password CLI and GUI, it expires and I can not connect, I do password reset using the DVD of the ISE.

  I naviguer navigate to the CLI of ISE, then perform the following commands:

  conf t

  password policy

  no password-expiration-enable

  and reset the password of admin GUI, using the command:

  # reset-passwd ise admin request

  from the interface of ISE I delete option for the devil admin account after 45 days.

  but after 60 days, the password expire again.

  kindly advise what to check for this question expires.

  Hello Mostafa,

  Yes, the last answer was more towards past-mgmt GUI because in the majority of cases, it happens with the administrator account on the user interface. I need to know if you've restarted the ISE after disabling the expiration of the CLI, because what I read a few weeks in an internal fault which password policy settings are not preserved on cli after restart so just to check could please check current on CLI w settings / help to see the race. in the password policy.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• I need Cisco ISE VM part # L - ISE - VM - K9 = to install ESXi

  Hello

  Do I need permit L-ISE-VM-K9 to install Cisco ISE on an ESXi?

  In fact, Cisco ISE can be downloaded with an Eval license for 90 days.

  I know, ISE license (basic license, for example) is required.

  Thank you very much.

  Greetings,

  Norbert

  Although the demonstration you use is free, you have to pay for L-ISE-VM-K9 when you move to a production model because it uses an Oracle database licensed under it.  You must do this for each instance of ISE you are running.  You can then buy licenses wireless as necessary for your number of devices.

• Cisco ISE point endpoint assets use Reset

  Hello

  I have a Cisco ISE running version 1.1, and I was wondering if it would be possible to reset the license use/active end point shown on the dashboard? Noted after a restoration of EHT due to the replacement of the material and I noticed that endpoints use County/active license doesn't seem to go down.

  The following methods have been tried, but without success:

  1. reboot the Server/service of ise

  2. turn off all devices in the network use the ise as there are no customers/device access; example of switch/wlc/etc...

  3 remove all use of endpoints in the Group of identity/identities

  4 disable profiling at the ise

  As the ise has been installed with a basic license; not too sure if it can be either a bad restoration (all service/application work however) / accounting bad Ray which is not expired on the ise / etc...

  Any help is appreciated on how to reset the active use of point of termination/license.

  Thank you.

  Here is a method to remove outdated records. Please try this:

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/api_ref_guide/ise_api_ref_ch2.html#wp1072950

  Thank you

  Tarik Admani
  * Please note the useful messages *.