3845 fails to deliver

Similar Questions

• Application of office messages frequently fails to deliver messages to Android phones

  When you send an SMS messages to an Android user via the 'Messages' application on the desktop, I often get an error "not delivered". Sometimes, if I connect to my Apple account in the section 'Preferences' from the Messages app and then reconnect it starts working again, but sometimes it doesn't. But ultimately it fails then a few days later (I left my computer running continuously). I can contact the person via SMS with my iPhone constantly. So there seems to be a bug with the desktop application since I understand that the Office uses the phone to send the SMS message to the Android device.

  Is there anything I can try to get the desktop application of Messages to work with Android 100% of the time?

  Make sure your iPhone is on the same network and is on.

  Check the iPhone > settings > Messages > text Message Forwarding > listed your mac?

• Satellite T110 - 10 X fails to deliver with Windows 7 64 bit

  Hello

  A strange question, it seems that when I choose "restart" on windows 7, the laptop stops and never restarts...

  Anyone encountered this problem?

  Thank you

  All other functions (standby, Hibernate, turn off) work correctly?

• Can I add a remote appleTV w. fixed network app

  Hello

  Is it possible to connect the application remote Apple TV to my Apple TV, if my Apple TV is connected to my home network via an ethernet cable, rather than via WiFi? So far the app does not seem to find the Apple TV.

  [I use 10 IOS on iPhone 6 and trying to pair it with my second generation apple TV that is connected to my home network via ethernet - no WiFi, but all my other devices on the home network to communicate with each other without worrying if they are connected via WiFi or ethernet]

  Thanks for the tips!

  Hello. The documented requirements say "WiFi connection to Apple TV".  The Remote application uses the Hello Protocol to locate services, as well as AirPlay. Some routers fail to deliver the required packages between the VLAN wired and wireless, and yours is perhaps one of these. Try restarting the router and Apple TV. Sometimes, this will cause the packages needed to run through.

• Problems with outgoing mail

  In the two months I have had repeated issues with sending emails from my iPad Air.  The e-mails appear in the sent folder but are not delivered.  I get e-mails very well.  I can e-mail sent from Web sites.  The rest of the iPad works fine, but at some point the outgoing mails fail to deliver or give me any kind of error message.  I spent 12 hours or so away on the phone with Apple engineers who confirmed the problem making me send emails which they had not received and then have me confirm that they appear on my device in the file sent. Apple has increased the question to a researcher 3/2, and that was the last I heard from them.  I completely deleted the iPad twice and set up as a new device, manually adding in the applications and data.  For a while, everything works as it is supposed to.  It is the well because the only way that I realize outgoing mail is broken is again send myself or my husband a test email.  In the meantime, everyone thinks I've fallen off the coast of the planet.  Someone at - it suggestions?

  I'm sure you have tried this, but have you been in the settings, messages, contacts and calendars, remove your e-mail account, and then add the Info?

• Automatic update problems.

  Hi people. Something fishy seems to happen with my computer. I seem to have a mystery on my hard drive partition. You see, my hard drive must have ONLY ONE PARTITION, C drive. And that's what shows. However, during boot on the Windows XP installation disk, I discovered a second 31 MB partition which does not appear in my computer. Automatic update also fails to deliver the most recent Microsoft Updates for me and same Windows SteadyState does not install any update, even though it says it's. Several months ago this computer had a bot and 37 Trojans, viruses and spyware. I reinstalled to get rid of the bot. tell me, is what is happening here normal, or should I worry? Is it possible that the bot is always on this partition of mystery? Thank you.

  I have no idea what that means "Custom Windows update IE" and you still have not answered my question #4.

  But don't worry about this now. Your other thread tells me everything I need to know: your computer still infected or is it again be infected (horse of Trojan W32/FakeAlert - variant & friends).

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a local network (i.e. other computers) and before using a USB or SD card that is not brand new, or has not been freshly formattedotherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the appropriate removal tool before installing updates, Service Packs Windows or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       McAfee Consumer product removal tool     
  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• E531 Audio driver audio not available not available

  Hello

  The latest versions of Conexant audio driver (currently 8.65) do not support audio downtime such as the legalization of the volume. Equalization of the volume is pretty important and I don't know there are people who use other options too.

  http://PUU.sh/aFP1V/246a0b917d.PNG

  [mug shot]

  Conexant overall doesn't seem to be too good to make the drivers. It is a 170 MB download for a pilot of 4 MB (which they refuse to do know themselves), followed by of a probably huge facility some DSP Dolby and the 3D effect that cannot be chosen. This allows the stereo mix became finally possible with the latest versions, but now they said bug. Why companies that fail to deliver appropriate products is not more these days out of business? They are everywhere and they just continue to grow despite their obvious failure.

  [/rant]

  Aaand I just found 2 command new Panel applets, with different audio settings in a window unnecessarily decorated rather than the native user interface, and other accommodation dolby unnecessary presets and options that are normally found in the native speaker config, including equalizing the volume... What happened to the design minimalist and effective?

• My PC sends foreign to my entire contact list unwanted emails, how to fix this?

  A week ago I realized something was wrong when I started to receive e-mail notices "Failed to deliver" contacts that I haven't sent anything to, but also of many emails that have reached their destination.

  This has already happened several times & people send me repliestelling me that they know that I have not sent this information & that my email has been hacked, but I don't know what to do.  I have comcast service, windows vista home premimun, & use internet explore. I absoulutely know nothing about computers & would appreciate any help that can help me solve this unwanted problem.

  Thank you!

  Hello

  you say not what e-mail program, you use

  If you are using Windows Mail, Windows Live Mail or Outlook, read on.

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/products/malwarebytes_free

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Newbie wanting to AIR w / extensions to native code and the Protocol of Android accessory

  My interests include prototyping and very specific to very specific real-world applications of programming solutions.  So I bought a Playbook after viewing the quick "prototyping" video in this blog:

  http://devBlog.BlackBerry.com/2011/12/BlackBerry-PlayBook-Arduino/

  I tell myself I can do cela or something similar with PIC Basic Pro and a Microchip IC.  Although it has been nearly six months, from what I can tell, the RIM developers have failed to deliver on explaining how to use native code and the ancillary Protocol Android to connect in series on client's port to the mini-USB of the Playbook.

  Is RIM people please, show us how set up the programming environment, use the code, the mini-USB port on client Playbook, the adapter USB (where to buy, what is it exactly?), so we can use the USB client connected to an Integrated Circuit Programmable to connect in series with an AIR running on the Playbook application.

  Kenneth Mark Klausner

  How this kind of thing is that you have the hardware (Controller USB etc.), and there different registers, buffers, etc. that must be handled.  The first layer of software, what made this manipulation, is a device driver. While in some operating systems (Linux, for example), you can write yourself, or port code Besides, material in the PlayBook is accessible only by the drivers as part of the operating system, which means that the RIM should provide their.

  These drivers are may be incomplete. We do not know that for some.

  Drivers expose a particular interface to the next higher step of the software, an interface that must be respected. This interface is generally quite low, and the driver can support the features that cannot be exposed to third party software, so for this and probably other reasons, we can not directly access (and are prevented by security mechanisms).

  There is another layer of software on top of the pilot, commonly called a library. This library is also provided by RIM, as part of the operating system.

  This library can be incomplete as well. We do not know the details, but I suspect someone who knows this level of the design of the system and who attended the BB10 Bluetooth and USB discussion group would be able to interpret what they heard there to clarify.

  It's this library which provides what we call a bit of hand-wavingly API 'USB '. This is an interface in C language, with a set of data and calls structure function definitions that enable higher level code perform different operations related to USB.

  If you want to write a DONKEY, you write about this library, not the level of driver and not material. You have no choice in this matter, as it is applied by the security of the OS.

  So to sum up, if we refer to 'USB API' they're talking about essentially the library routines, and it is necessary to talk to this API to get whatever it is the case here.  The API can be described in the header files (there is something), or maybe he's going to be an API different than what I see out there. Whatever it is, it is undocumented in other places at the moment, so all who want to enter this need to make much low level experiment (talking to the library).

  They can have the documents which cover this and perhaps code samples to talk to the library. If the version of the operating system we have has the incomplete versions or buggy drivers or libraries, this could explain why they have not pushed this documentation and code for us.

  I think that I heard that they are gathering input (requirements, use cases, comments) from people in this session.  Who tells me that they are still working on some details, and when they are at a stage like that they simply don't tell us publicly where they are, deadlines, or what it will look like when it is done.

  And so expect.

• Failure of e-mail delivery

  I sent emails to certain addresses. These addresses now get a delivery failure. I had someone send me a mail so I answer and I get a failed to deliver? Why?

  This is the IP address that is be blacklisted by Spam Cop and SORBS Spam: 65.55.116.21

  Blacklist search results link: http://mxtoolbox.com/SuperTool.aspx?action=blacklist%3a65.55.116.21&run=toolpage

  This seems to be a relay IP address owned by Microsoft.  Someone probably sent an email marked as spam and Spam Cop or SORBS Spam picked it up.

  Just try to pass on info to help.

• restore the files backed up on windows 7 created from windows xp

  I want to restore my backup files that I created from windows xp using windows backup utility to windows 7.

  I tried to use the backup and Restore Center, but it can not recognize the backup files.

  What should I do?

  FYI, I'm using windows xp in my office and windows 7 in my house and all the days after that I worked in my office within the working time, I transfer these files from my desktop pc to my home to continue my work pc.

  Thank you

  See http://www.winhelponline.com/blog/restore-bkf-file-ntbackup-windows-7-vista/

  Microsoft has promised a utility but failed to deliver.

• SSD Solid State drives: The upgrade of the Ultraportable X 40 and X 41

  Need some advice!

  I think the upgrade of my ultraportable Thinkpad X 40 of very slow 1.8 "HDD with one module SSD (a DRAM unit, not a flash). These modules are available but expensive and rare.

  There are obvious problems.

  Windows is optimized for disk SSD hard & uses a lot of disk streaming - possibly reducing the performance gains expected.

  Some technical documents I've seen indicates (at least on Linux) that a writing activity can be deferred from RAM instead, and there are also a few options on where the constantly updated files could be moved. Maybe Windows can be twisted (a little) but I'm not getting my hopes upward.

  Assuming that I could not even find a loan to do the upgrade - repair-depot

  1: DRAM SSDS do not need constant battery? If so - how does X 300 new Thinkpad not to lose your data when you pull out main battery - a local battery on the SSD unit maybe?

  2: If the SSD consumes power even in stop - the current-draw would be low enough to be met by the local SSDS without pulling on the main battery?

  3: some SSD upgrades fail to deliver the expected - performance gains because drivers cannot be updated level - and ur stuck with the original e/s speed without worrying.

  Since the 40 X 1.8 "HARD drive runs very slow though - could I stand a good chance of significant performance gains?

  4: has anyone found to the main battery life drop - instead of improve it-due to an SSD upgrade?

  5: Here's a link treated showing the whole 40 X SSD upgrade procedure in the life-color www.think4d.de/nbb/x41_ssd.htm

  Any comment is appreciated.

  Rob

  SSD requires no battery power to keep these data.   they work exactly like the removable flash high-speed media.

  SLC drives are faster than MLC drives.   If you can afford it, download a SLC drive.

  battery life will be better, but marginally.   I have an SSD in my X61s and she has added about 20 ~ 30 minutes more travel time when you use a battery 8 cells.

  You can find the following useful lenovo's Matt kohut:

  http://lenovoblogs.com/insidethebox/?p=96

  http://lenovoblogs.com/insidethebox/?p=141

  http://lenovoblogs.com/insidethebox/?p=148

  http://lenovoblogs.com/insidethebox/?p=173

• How to review the transcripts of cases of Support Adobe from the Customer Support Portal?

  I can see case ID, dates, status, product, type, subject matter and notes and answers. However it is not a complete transcription of the cat case on my Customer Support Portal page.

  Do you know if it is possible to consult the transcript of chat support somehow matter?

  I know that the transcript is available by e-mail when selected during the chat session, unfortunately some sessions have failed to deliver this e-mail. This might have something to do with the representative of the technical support of switching over the conversation, or maybe just old e-mail message is not delivered.

  See the image attached below.

  

  Hello

  If it failed to deliver to you during the chat session, there is no way to do it under the Customer Support Portal.

  In order to get the transcript of the conversation, please contact customer service

  We will send it to you by e-mail.

  Kind regards

  Sandrine

• Muse not registering is not the .html files

  I'm working on a site of Muse and Muse is no longer to save newly added files .html on my hard drive.

  When the site updated (after a site-save, with new pages) is open, the new files do appear in outline view, design and preview, but when I use Microsoft search, these files do not appear anywhere on the disk. It's really strange. The files must exist, because they show when the site is open, but simply could not be found on disk.

  I first noticed this behavior when an update of the site via FTP failed to deliver the new files .html or css on the server.

  What is strange, however, is that if I "export to HTML", the appropriate files are created and registered, but only in the "Muse Export" folder - and not where elsewhere.

  I uninstalled Muse, restarted, then re-installed and the behaviour continues.

  I then tried to create a new empty site with only four pages, basic navigation text and a graphic on each page. Under "file, register the site" the operation seems to behave normally, but the new HTML and css files are no where. Again, when I exported the site in html format, the files are created and saved in the MuseExport folder.

  Question: Any thoughts?

  (I also noticed that "export as html" seems to overwrite a previous export even if the domain name that I entered is different. I predicted that the prompt for the domain name in the export process would result in an export of single site in the MuseExport folder. I note that you can change the backup location of the default MuseExport folder, but I was unaware of the potential of data loss until it was all over.)

  Two question: Is there documentation somewhere, other than videos, so I can understand what Muse done before I screw up?

  See you soon,.

  Anne Jackson

  With regard to this point:

  When the site updated (after a site-save, with new pages) is open, the new files are displayed in outline view, design and preview, but when I use Microsoft search, these files appear not anywhere on the disc. It's really strange. The files must exist, because they show when the site is open, but simply could not be found on disk.

  When you create a new page in Muse, the file is kept in the Muse (YOURNAME.muse) program and will not be registered in a .html page until you export the site through the Manage / publication or file: export as HTML.

• Laboratory: HOL-OPS-04 - DynamicOps by VMware - rapidly deliver private and clouds through hybrid multi-vendor environments fails on step 36

  I was trying to run the laboratory DynamicOps. I got to step 36 which is the stage to present a "new VM request" to hit the Send button that a message box appears indicating that the license has expired 1/262013. There is no way to move forward. I guess that's the license DynamicOps.

  If you close the manual and look in the lower right corner, you should see a button at the end of the lab.  You will be asked to confirm.

  Then you should be able to reregister.