3D extrude and bevel?

Similar Questions

• Live Paint objects overlapping extruded and beveled

  I have a Celtic design which has sections I want to overlap, but I extruded and beveled to make more realistic metallic look.  I have tried to widen its appearance before performing the live painting, but "live painting" option is used in output in the menu... What can I do to live paint this object without losing the appearance of 3d?  If I sketch the lines first and then doing live painting... it loses all its extrude and bevel.  Help!

  Oooh I found a way... it's a bit tedious, but it works!

  I've dissociated and put copies of two components I want to ride on a new layer, in place...

  Then I do a current overlapping areas clipping mask...

  This cut mask then sits on top of the underlying section that wasn't right layers and now puts the object from the bottom up!

  I now do with each duplication where I want to put the object from the bottom to the top... but it's worth for the awesome effect!

  I hope this helps someone else out there!

• Extruding and bevelling fuzzy jpeg image

  Problem with Illustrator CS6 "Extrude and bevel" effect.

  I have a linked JPEG that looks quite clear-is, and I want to apply a 3d effect make it look like a Panel.
  When you apply the effect, the image becomes blurry and pixelated, as if the quality has decreased.

  This occurs both in the workspace when you save a PDF copy.

  

  I didn't even know that you can do to a placed raster image. Hah!

  in any case it seems to me that illustrator is resampling effects of rasterization of the defining document. which makes a kind of sense, I suppose, since you are turning it into an effect. Turn it up to 300 DPI and see if it's satisfactory.

• Extruding and bevelling banding... How do you do the smooth gradient?

  Hello

  I have a form that I want to do using 3D extrude and bevel tool but although he stages of mixing the highest amount possible, I still have tapes. I use CS6. And there is no gradient on the flat image (he began as white). Any ideas?

  

  I hope that Yes. Well the best way would be to redraw it comes with a minimum of points. but you may be lucky with object > path > simplify.

• By turning the result of a 3d extrude and bevel in path with fill

  Hi all

  I have a path with a fill to which I applied the extrude and bevel 3D effect.

  What I would like is to create a modifiable object path as it appears with the 3D effect applied, so Illustrator treats the effect as 'flat', if you know what I mean

  Does anyone know how to do this?

  Thank you!

  Object > expand appearance

• 3D extrude and bevel Resize questions

  I am currently using two different versions of Illustrator, one on my laptop and the other on my new desktop computer. I cs5.5 on my laptop and cs6 on my desk and I recently encountered a problem. I created a company on cs5.5 logo and inside use exturde and bevel for the three rings. These resize well on my laptop but when I transferred the work on my desk now if I resize the logo at all, it seems something very strange happens over time and sometimes increases or fail to shrink as the logo is narrowed.

  Any thoughts?

  Very appreciated

  Matt

  (Size of the original logo on both computers |) Smaller resized logo on my laptop. Smaller resized logo on the desktop with cs6

  

  Effects of scale Strokes & is verified on both machines?

• 3D extrude and bevel and texture mapping settings

  Hi all

  I can't find in the guide reference to the api 3d extrude & bevel or veneer texture settings.

  Is it possible these methods on a path of script item. If Yes can you please include a small example.

  I need this for CS6, but it might also be ok if it works just with CC.

  Thank you

  Trevor

  

  

  Sorry, there is no access to the effects... you could however create and apply these effects by hand, create a Style (also handmade) on the effects applied... now, you can apply the graphic Style to any object via script... Yes, it's all we can do, not useful if need to change the settings for the effect.

• 3D extrude and bevel 3 surfaces or 5?

  Hi, I'm not understand what I see on the 3d extruded circles. I've been mapping (try, at least), a symbol on the form, but was frustrated by how limited, I've been to see mapped art, he'd be halfway in the visible part of the form. (I understand the mapping works: the dark parts are out of sight, the white parts are of the opinion). but somehow, one of my 3d cylinders has five, not three. with the additional surfaces I can fake that I need. I don't know how I have 5 on some and 3 on the other. new bottles have 3. what is the method to get 5?

  See screenshot (this was created in AI CS5 (mac), but published in AI CC 2015 (pc win), I thought maybe it was the most recent version, but I open the file on the mac CS5 yet once and see 5 surfaces):

  

  He had 2 fillings on the object that has 5 surfaces. You must remove one of the fillings (use the appearance Panel)

• Text 3D - Gradients are rasterized and causes the color of the strips

  Hi all

  I applied a 3D > extrude and bevel on my text. Now the problem is that when do my border (part that is extruded) causes a color, stripes, being given that it pixelated

  the gradients. See my picture below.

  How should I take away these bad lines?

  Thank you

  

  Gradients are still pixelated when using the 3D effect:

  

  But what you show in your image isn't really pixelation.

  Fill the shape with a flat color and let the 3D lighting alter the values. Otherwise, apply the effect 3D with 'no shadow' then object > decompose the appearance and apply your gradients later.

  Illustrator 3D is not "top-of-the-line" and often requires exapanding and refining after the use of the effect.

• 3D effect

  Hi all

  Here's my problem... I have create a shape (circle), then I selected, 3D, extrude and bevel effect. I then extrude the circle to look like a tube. It seems that I want. Then in the Options of extrusion and bevel Surface section, I selected wired. Now I want to do is use the lines, he has provided. Is there a way to convert this wired to blows?

  Thanks in advance.

  Object > expand appearance

• 3D with missing filler text

  I have a text that has been presented and has a white line lined up outside.  When I add the extrude and bevel 3d effect the 'E' loses its filling.  Any ideas why this would happen?

  

  

  The text is filled with a gradient?

  If you want to apply a gradient to a 3D object, then rather apply the mapping.

  See the manual on how to map 3D objects in Illustrator.

• How make a text shaped like that?

  Hi guys,.

  I need to make a drawing that contains text that needs to be in 3D, just like on the photo.

  My experience with Adobe Illustrator 3D has never been good so far, so I hope you can help me how to solve this problem!

  Thanks in advance guys!

  Bob

  Create the text and then use effect > Warp > Arch to get the text to bend upward in the middle. Then use the effect > 3D > extrude and bevel for the text to expand to the far. You'll have to play with the rotation to get the correct aspect for the distance, but it's the cursor from the Perspective that will allow the text to fade at the same relative point.

  You will probably be able to get a completely identical effect in Illustrator, because the text is quite complex.

• make an arrow with an angle especially 3d

  Greetings,

  If you look at the table that I got this arrow I want to stretch in an axis z for him give volume, is there a way to do this? I played with the options of extrusion and 3d bevel, but he turns all this... I want to have the front of the intact arrow. Hope I explained myself :)

  Thanks in advance!

  

  3D extrude and bevel will work if the numbers are good.

  

• Problems of sectors 3D graphic conversion

  Hi all

  I have problems within the Illustrator CC.  I have created a pie chart and found a tutorial on how to convert it to 3D.  Unfortunately whenever I have extrude and bevel it, nothing happens.  I turn no preview on... no change.  Nothing I do converts it into 3D.   It works fine on a copy of the CS6 I have on another computer.  Is there a setting is off or something?

  Thank you

  OK, I think I thought of her!  When I choose the table, I wasn't able to apply 3D... effect or any effect.  They were all grayed out.  The reason is, I've always had the window where I enter the card opening numbers so that it would not allow me to change when the chart is selected.  I hope that this explanation makes sense.

  Thank you for your quick help with this.  Very much appreciated.

• Why do I get this white double-edged when I enlarge appearance?

  Hi everyone, I'm having this very annoying problem in Adobe Illustrator CC

  When to use a tool such as the tool extrude and bevel to make a 3D object, everything works fine until I must expand the emergence then I get this advantage on my subject and I can't find a way to get rid of it.

  Take a look at this picture to see what I mean

  http://I58.Tinypic.com/2r7yohi.PNG

  As you can see, their is a white annoying jagged edge and it's really annoying and I can't get rid of him, anyone have any ideas?

  Thank you