Problems of sectors 3D graphic conversion

Similar Questions

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• I click on "Fix a problem with the NVIDIA graphics driver" and he says: "this solution could not be downloaded.

  I click on solve PC problems (the flag) and it says address a problem with the NVIDIA graphics driver. I click it and it says:

  This solution could not be downloaded

  --------------------------------------------------------------------------------

  The most likely causes:
  Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

  --------------------------------------------------------------------------------
   
  I am connected to internet, and the works, works etc of web browsing of windows update. Why it is not downloading the solution?

  Download and install the latest driver for your graphics card nVidia.

• My window 7 showing message "a problem with the NVIDIA Graphic driver", but I can't download the solution

  My Windows 7 PC at home keep crashing and I keep losting my screen when I played the game on the last 6 months.  After I restart my PC, it says that there was a screen.   I had since a few Update window update driver and try the NVIDIA drivers with no will.  There were a few times he were message indicating the "resolve a problem with the NVIDIA graphics driver" on the taskbar.  When I click on the message and try to download.  It gives me the message that "your computer was not able to download the solution at this time.  Make sure that your computer is connected to the internet, and then try to download again"that had happen all the time, and of course, I had access to the internet all the time!  I'm getting nowhere for solve this problem.  Can anyone help?  I want to know if there is something I need to know the video driver as usual outside the upgrade.

  PS I tried a lot of stuff, running the troubleshooter from the performance.  I had an i7 with plenty of RAM, running only a few program, hard disk error not... etc.  It seems related to the video driver. I update my window.

  Hello Lewie,

  Thanks for posting your query in Microsoft Community Forum.

  1. What is brand and model your computer?
  2. You did it any significant hardware or change software on the computer before this problem?

  I understand that you lose your screen when you play a game. This happens usually if the installed graphics driver has corrupted or unstable. Therefore, I suggest trying the following methods and check if the problem persists.

  Method 1: Run the tool material and devices

  Try running the next fixit and check whether the problem is resolved.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Update your graphics card

  1 open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.

  3. Click tab driver , click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer (NVIDIA) Web site and download & install the latest driver. Or contact the manufacturer of your system to do.

  For reference, you can also consult the following Web page. Click on continue to this site Web (not recommended) if you are prompted for any error of certification.

  A problem of NVIDIA graphic driver

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Problem with Standard VGA graphics card

  Hello everyone!

  I have problem with Standard VGA Graphics Adapter.

  State of the device: this device cannot start (code 10)

  My specs are:

  AMD Radeon HD 6470M

  Intel Core i3 - 3110 M CPU @ 2.40 GHz 2.40 GHz

  RAM: 4.00 GB (2.41 GB usable)

  Type of system: operating system Windows 7 32-bit

  Can someone help me with this problem! I can't start my games!

  Please, I beg you! Everyone!

  Hello:

  When you see the label adapter VGA Standard, this means that the graphics driver is not installed or improperly installed.

  Go to the page of the driver and support for your laptop and install the graphics driver from AMD W7 32 bit.

• Problem with string to Int conversion

  Dear friends,
  
  Problem with string to Int conversion
  
  I'll have a column where most of the values is digital. Only 4 values are not numeric.
  
  I have replaced the non-numeric values to numeric in order to maintain the data type.
  
  Grade.Grade DEAL WHEN "E4" THEN "24' WHEN 'E3' THEN '23' WHEN 'E2' THEN '22' WHEN 'E1' THEN '21' Grade.Grade OTHER END"
  
  This is the result as inactive
  
  Grade
  
  _0_
  
  _1_
  
  _10_
  
  _11_
  
  _12_
  
  _13_
  
  _14_
  
  15
  
  _16_
  
  _17_
  
  _18_
  
  _19_
  
  _2_
  
  _20_
  
  _21_
  
  _22_
  
  _23_
  
  _24_
  
  _3_
  
  _4_
  
  _5_
  
  _6_
  
  _7_
  
  _8_
  
  _9_
  
  Discount
  -            -            -
  
  Now I want to convert this value in digital and do some math
  
  So I changed the formula as below
  
  Cast (CASE Grade.Grade WHEN "E4" THEN "24' WHEN 'E3' THEN '23' WHEN 'E2' THEN '22' WHEN 'E1' THEN '21' Grade.Grade END as an INT. ELSE")
  
  
  Now I get the following error
  View display error
  Driver Odbc _ returned an error (SQLExecDirectW). _
  Error details
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  _State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 17001] Oracle error code: 1722, message: ORA-01722: invalid number in the OIC calling OCIStmtFetch. [nQSError: 17012] In bulk fetch failed. _ (HY000)
  SQL issued: SELECT cast (CASE Grade.Grade WHEN "E4" THEN "24' WHEN 'E3' THEN '23' WHEN 'E2' THEN '22' WHEN 'E1' THEN '21' Grade.Grade END as an int. ELSE") seen'Human Capital' 0 - Costing Manpower WHERE LENGTH (Grade.Grade CASE WHEN 'E1' THEN '20' WHEN 'E2' THEN '21' WHEN 'E3' THEN '22' WHEN "E4" THEN "23 ' ELSE Grade.Grade END) > 0 ORDER BY saw_0_
  
  Discount
  
  
  
  
  
  Could someone help me
  
  Concerning
  
  Mustafa
  
  Published by: Musnet on June 29, 2010 05:42
  
  Published by: Musnet on June 29, 2010 06:48

  Are you sure you don't have another non-digital value in your column. I want to get this filter temporarily just to check if your plaster works or not. If it works, then you can remove this filter.

• Main problems to upgrade the graphics card in my Mac Pro in 2006.

  I am trying to upgrade the graphics card OEM in my Mac Pro 2006 to a Radeon HD 4870 1 GB graphics card.  I have big problems.  The previous owner recommended that my BONES 10.7.5 uninstalling and reinstalling.  I don't know how to do this.  The Apple website was no help with this issue.  The previous owner gave me a lot of procedures I've ever done before, including removing and re-creation of my RAM and using a Kext troubleshooting application.  Any suggestions you can offer would be greatly appreciated.

  a 4870 with 1 GB of VRAM is not a real Mac card (who had only 512 MB of VRAM). Unlikely to show an image until the login screen, if ever. Unless the seller has a 100% guaranteed working procedure to get this working, I recommend you return for a refund - it is not likely to work in your Mac.

  A true 5770 Mac or 5870 is the best approach for a 2006 or 2007 Mac Pro, because they are known to work with everything except movies under copyright, and your Mac is stuck in the 32-bit kernel and pre - 10.7.5 MacOS.

• Problem with the latest graphics drivers Intel 82830 M graphics Satellite 1100

  I have a 1100 Satellite with the Intel 82830 M graphics card. The latest driver is version 14.7 which I just installed - icon of graph in the right lower corner of a multicolored square changes a blue screen when you install this, and the mouseover text says "Intel(r) Extreme Graphics.

  However, since installing it, my screen freezes everytime I start a game, or if I go into display properties & change anything. A hard reboot is required. Also, the startup process takes 2 - 3 times as long since this upgrade.

  Everyone knows about this problem? Does anyone know of a solution? I've seen a few posts on other forums about this, including some say that this problem came from XP Service Pack 2. Can anyone confirm this?

  Hello

  I assume that you have installed the driver for graphics card on the Intel site and you do NOT use a graphic driver Toshiba, which has been designed especially for the use of the laptop.
  Well, Toshiba recommend that you use the drivers from Toshiba. In this case, you should try to use the recommended graphic driver that you can download from the Toshiba driver page.

• Hello. I have some problems with my ATI graphics card

  I have a 4540 s HP's Probook. Whenever I open my laptop, it says this:

  WARNING: The Catalyst Control Center is not supported by the version of the graphics adapter driver you activated. If you please update your ATI graphics driver or enable your ATI card using the display manager.

  

  I tried to update the driver but it will not work. In addition, - sleep mode doesn't work for me. I don't know why.

  It has worked well so far.

  

  Some help would be really nice. Thank you for your time!

  Dark salvation,

  At this point, the best way is to go to:

  http://support.AMD.com/en-us/download/auto-detect-tool

  Download and run auto detect tool, it will install the best drivers for you directly from AMD support page, so you will solve your problem.

  A few clicks and the work is done!

  I wish you all the best, report it please if you have any problems!

  < < <-*.
  * Click on the star of CONGRATULATIONS on the left to say 'Thank you'*.
  
  Make it easier for others to find solutions by checking a response to "Accept as Solution" if it solves your problem.

• T410 text selection problem w / Intel HD Graphics Driver for Windows 7 (32 bit)

  After I've upgraded to the latest Intel HD Graphics driver for Windows 7 (32 bit) and Vista (32-bit) - ThinkPad T410, T410i T410s, T410si, T510, T510i, X 201 X201i, X201s, and X 201 Tablet

  Version: 8.15.10.2025

  Release date: 29/01/2010

  Who is here.

  I came across weird questions, highlighting the text. Essentially, my text highlights but may be of different colours (some too light to see). After getting this weird highlight, I can minimize, maximize, or move my window off the coast and back on the screen and the highlight will be one color.

  This problem goes away if I return to the 8.15.10.2008 version.

  Example 1: question	Example 1: Problem after restore/maximize window

  Example 2: question	Example 2: Problem after restore/maximize window

  
  

• Problem with autoscaling after graphical zoom

  Hello

  I am struggling to find my error in reasoning, but so far has failed, and would be very grateful for the help.

  My problem seems to be very basic: I have a graph of control with zoom option enabled, for example rectangle zoom or zoom for y. There is a playground on the graph, plot zoom in part of the works as expected.

  Now I would like to restore the graph, that is, set it to full scale showing the complete route once again, using SetAxisScalingMode.

  Stupid enough he not always seems to work, the shaft is not properly set, i.e. that the enlarged part of the plot is visible even after affecting the autoscale axis...? I don't remember what I'm missing here.

  I have prepared a demonstration simple, based on the NOR sample userint\GraphAnnotations.cws, attached below.

  In this example, I made two small changes: 1) I have added a "restore" button to set the x and axis Auto scale value. (2) in the IUR, I changed the style of graphical zoom to rectangle Zoom (Zoom or to y)

  To reproduce the problem, press "Draw", zoom in on the graph so that the maximum and minimum of the plot are not displayed. Press the button restore, which will show the complete graph. Fine. But now zoom in again, press the button restore: now, it seems most do anything.

  Thank you!

  The problem is that when you set the mode to automatically scale the second time, it is already set to auto. Because no changes were made, the chart has no need to recalculate the scale. If you plotted instead of a new data point, you would see the autoscaling come back into force. A simple way to force it to recalculate the scale would be to scale to VAL_LOCK, then return to VAL_AUTOSCALE in the RestoreCallback. Because the value of the attribute is changing, a new drawing occurs which causes the Auto scale to recalculate.

                          SetAxisScalingMode (panel, PANEL_GRAPH, VAL_LEFT_YAXIS, VAL_LOCK, 0.0,
                                  0.0);
              SetAxisScalingMode (panel, PANEL_GRAPH, VAL_BOTTOM_XAXIS, VAL_LOCK,
                                  0.0, 0.0);
              SetAxisScalingMode (panel, PANEL_GRAPH, VAL_LEFT_YAXIS, VAL_AUTOSCALE,
                                  0.0, 0.0);
              SetAxisScalingMode (panel, PANEL_GRAPH, VAL_BOTTOM_XAXIS,
                                  VAL_AUTOSCALE, 0.0, 0.0);
  

• Problem with Intel HD Graphics instaliing

  Hi all

  I need help with my laptop.

  I have recently reinstalled Windows 8.1 on it, and now when I want to install Intel HD Graphics Driver it gives me the error:
  "This computer does not meet the minimum requirements for installing the software."

  I downloaded the driver from the official site I found for my laptop model HP 15-d051sm.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=6786...

  It worked until I installed Windows 8.1 and now it suddenly doesn't work. Also, when I go to Device Manager everything I get for display is Microsoft base display driver.

  What could be the problem?
  Thank you

  Hello:

  Do you have everything first to install the first Intel chipset driver and restart the computer before attempting to install the Intel graphics driver?

  If so, then I don't know what could be the issue.

• Why my computer keep stop inadvertently with this message: address a problem with the NVIDIA Graphics Driver__NVIDIA graphics driver has stopped working properly. ? __

  Recently my computer (laptop) was stopped when I put the command "sleep".  It displays a message about my NVIDIA Graphics Driver does not. I have check the driver to use and it shows like th emost current and NVIDIA hardware works correctly... who is not lying.

  A recent Microsoft update would be the cause of this problem suddenly?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• The problem of recognition of graphics card - games but not play videos in VISTA.

  I have a VISTA 32 bit OS and I use a NVIDIA Geforce 8600 graphics card. Windows recognizes that the graphics card is installed and I can play with my normal settings. I am able to put a 1280 x 1024 resolution and the graphics card appear in my display settings. The problem comes when I try and play the videos or anything that requires the graphics card in Windows. The video plays but is extremely rough, performance windows rated my graphics as 1.0 performance index and Director of windows will not open even as it says I have no graphics acceleration. I uninstalled and reinstalled the card but windows itself seems unable to use card during normal operation of windows only in games longer. Please help it's driving me crazy that the card seems to be working but windows is in conflict with something. Thank you, Michael.

  Hello

  Check with Nvidia Support and their forums might be a known issue.

  -NVIDIA drivers
  http://www.nvidia.com/download/index.aspx?lang=en-us

  Support NVIDIA
  http://www.nvidia.com/page/support.html

  NVIDIA forums
  http://www.nvidia.com/object/nvidia_zones.html

  1 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------------------------------------

  2 could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  It's my generic how updates of appropriate driver: (manually updating your display and video driver - do)
  do not use the Scan for drivers - enter manually the information.)

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - reset after each
  installation.
  
  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Problem Dell M5010 severe graphic?

  Hi everyone, I have some difficulty to find the culprit of my problem and how to fix it.

  Not for long I was installing a program in my M5010 in compatibility mode, a few minutes after the installation of the screen became what looked like an old CRT TV on without entry.  I flipped the switch and rebooted, everything seemed strange fine nothing, but when I stopped him normal again once he did it since then.

  Since then, I tried several things. First I tried to re install the OS, nothing.  Then I tried booting without hard disk, always the same screen.  Also, I jumped the CMOS battery to see if that would reset the BIOS to the factory, but there is nothing, it seems to be stored in a non-volatile chip.  I also tried an external monitor, not always the same problem. After that, I searched and found that if a laptop overheating in some measure the graphics chip can become welded causing my symptoms, so I checked that, no, it was fine. My initial suspicion was a graphics driver in the motherboard doesn't work does not, and now, I am led to think something on this line is the problem because the problem is in the BIOS for, not only the operating system.

  I don't know is it common for this problem, but if anyone has any ideas what the problem and any information on how to solve this I would appreciate it a lot.   I have an external USB HDD cable, so I could connect an external HHD to the M5010, or take the M5010 HARD drive and connect it to another computer to put pilots in.   Thanks in advance and let me know what can be ideas.

  Oh yes, I met one of my computer science professors and we looked on it, and both knew how to fix, he agreed that it was in the motherboard (somewhere).

  Since you have nothing to lose, you can try the heat treatment of the card mother - remove the Board from the system and remove all removable parts (including the CMOS battery).  Insert the motherboard on a non-conductive ceramic stove and finally in an oven at 350 F for about ten minutes.  The Council can cool completely and install it in the system - it can buy you some time before, he fails again.