3D layer works on the text

Similar Questions

• To work with the text to the assignment by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not start to rise upward, as happens in other browsers. I ask you for

  After the transition to Windows 7, there was a problem with Firefox. To work with the text to the award by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not ascend to the top as it was earlier, and like that occurs in other browsers. It is necessary to press the other key "down" which is him very troublesome. Resettlement on an earlier version (8.0) earlier irreproachably working, gave nothing. I ask you to help

  You must activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

• How to convert a layer back to the text "T? He is currently uneditable (how did that happen?).

  How to convert a layer back to the text "T? He is currently uneditable and I want to change the font (also, how what happened?).

  According to your layers panel. The top layer is a text layer years the second layer is a raster layer. A raster layer once the case has been closed, cannot be cancelled. It will have to be re-created. If for some reason, you left the file open, then it is perhaps possible to cancel it, because it would show in the history stack. But by default that stack is set to 20 States, to more than 20 he would push the battery.

  I think that you have to bite the bullet and redo this layer.

• Why my links do not work in the text box next to the e-mail in Outlook?

  I created an email template in Eloqua, which is a two-column layout. The text box on the left has links that work very well. The text box on the right has links that do not work. This only occurs in Outlook. If I find the email in an another e-mail client, all right. What could be wrong causing the links is not working?

  If another person has ever run into this and found a solution, please let me know. I'm pulling my hair out!

  I called support this morning and all I had to do was move the text box on the right side to the top of a few pixels and now everything works fine. I guess when the two tables are the same height, Outlook rides them and cannot process the links properly. I like it when it's an easy solution!

• Master Page does not work for the text block

  What I am doing wrong?

  I create a master page.

  It's a given size, 6 X 9

  It has a margin.

  It has a text box with a heading for chapter headings.

  So far so good.

  At least I have substitute her in the following pages, it seems fine.

  However.

  I want a footer (for page numbers) so that I place a footer on the bottom.  Let's say it's an inch of height.  Right now it has nothing in it.

  I want a block of text that falls between the header and the footer, so I can run inside without having it encroach on header or footer.

  The header seems protected.  But.

  No matter how much I try and do all that I do, "foot" does not appear on the following pages.  Nor does the text box.  The header area is "taken", but the rest of the page is at stake.  Not "foot".

  Help, please.  It's driving me crazy.

  Thank you.

  Thanks, Willi.  I thought about it.  Sometimes I'm so tired of banging my fool head against a wall.  I wanted to have coherent text blocks in my pages.  I didn't think I didn't NEED them.  The footer has appeared in the following pages as soon as I put SOMETHING in the chassis.  A variable.  When it is empty, the space is considered as unoccupied.  Duhhhh.  Time to go to sleep!

• Photoshop "Stops Working" when the text tool is used.

  Whenever I try to use the tool to type in photoshop, I get a window indicating that Photoshop has stopped working.

  I have not yet installed the new fonts, this is a new laptop.

  What I do do ti fix this problem?

  I have Photoshop CS5.1 64 bit and I'm running on Windows 7

  A corrupt police?  This happens. I just found this old thread:

  http://forums.Adobe.com/message/2845553

• AppleScript cannot change the font of the text layer

  I used Applescript to create a text layer and specify its properties, but when I specify the font I get a compilation error:

  Impossible to define 'class NTR' to 'TradeGothic-Bold ". Unauthorized access.

  That sounds like a kind of permission error.

  Here is a little simplified script:

  Tell application "Adobe Photoshop CS4"

  say current document

  do new layer of art Properties {name: "File name", type:text layer}

  say the text object layer of art 1

  the value {content, size, stroke color, position, type} {"thefilename", 12, {class:RGB hexadecimal color, hexadecimal value: 'CC0000'}, {2, 12}, text of paragraph}

  set the font to "TradeGothic-"BOLD""

  tell the end

  tell the end

  tell the end

  If I put the police manually and use 'get properties of the text object in layer art 1', the Script Editor returns (with a long list of other properties):

  "" police: 'TradeGothic-"BOLD".

  so I think that I've specified the name of the font correctly at least. In the list of properties returned by the Script Editor, the font is blue like above, but all other property names are purple. It's I have to say something.

  Well, after some trial and error, I answered my own question. Here's what worked:

  Tell application "Adobe Photoshop CS4"

  tell the active document

  new layer art with properties {name: "File Name", layer type: text}

  the text of the layer 1 of the art of storytelling

  the value {content, size, stroke color, position, type} {"thefilename", 12, {class hex color: RGB, hex value: 'CC0000'}, {2, 12}, paragraph text}

  tell the end

  set the font for the text of art layer 1 to "TradeGothic-"Bold"object

  tell the end

  tell the end

  Maybe someone who understands OOP and/or better than I do, may explain why it worked and my first try didn't.

• I use an iMac with El Capitan and Photoshop CS6. I'm trying to add a shadow to a text on a picture. I followed the instructions to double the text layer but not dropshadow dialog box appears and I can't. Where would it be?

  Double click on the text on the right side of the display panel does not cause a dialog box open. I just need to know where the dialog box is so I can add the drop shadow

  Please make sure that you double-click on the text layer in the layer panel not the name of the layer. With the text, it can be difficult if the name is too long. You can also right-click on the text layer in the Panel and bring up the contextual menu and select 'blending Options '.

  

• Fate to does not work on the caption text

  Hello

  The fate in and Out does not work on the text caption, it doesn't work on the bottom but not on the text itself.

  Animation of the example:

  

  Is there a way of fate in and out of the text?

  Kind regards

  Frank

  Hi Frank,.

  It's fading, but a bit faster than the bottom. Try it: do the fading in the longer time and you will see the discoloration on the text. I just checked.

  Alternative with more control: put the text into a legend of transparent text on top of the other button with background and apply an effect (0%) Alpha to 100% on this text.

  Lilybiri

• PS elements 11 cannot use the text function. Error message could not initialize the text.

  When I try to use the text function the letters do not appear. Text feature appears frozen. Get the error message - unable to initialize the text.

  Recently PSE11 uninstalled and reinstalled. Downloaded 2 Google font. Was able to use the text function with Google fonts with no problems. Two days later, attempted to work with the text function and the typed letters appear on the screen/layer. Tried to add the text with fonts pre-installed PS - still once, no text appeared. Impossible to set up a text box. How can I fix it? Thank you

  Suggest that you reset the text tool, that only he can fix.

  I believe in PSEv.11, there is a small arrow, top of the page to the left on the tool options bar. Click on this.

  If the arrow is not there, look in the options bar to the text tool, on the right, for a box with lines inside. Adobe changed the location and icon in later versions of the program.

• Can I change the State of an object by highlighting on the text?

  This issue probably makes no sense, but I didn't know how this word with just a few words.

  I'm working on a site where I have a "button" that includes text in. When someone passes over the button, it changes color (it's basically showing the user that the site meets). When I put the text in the button, it causes the button changes color when I go over it.

  I know that it is because the text is covering the area that is supposed to respond to the mouse of the user.

  So, I wonder if there is a way to either make the text and the 'button' all that against, or whether it is possible to make the text 'invisible' to the mouse. What I mean by 'invisible', it is that the computer recognizes the text that will be the key that is sensitive to the user's mouse.

  I am able to do using photoshop, but I was just wondering if it is possible to do in only muse.

  Hello

  You can define States for the background as the rectangle layer, then insert the text block that will change the State to move mouse, but if the text block covers the background, then he used active state.

  The object you are trying to achieve as invisible to the mouse text is not possible with the native menu features, but yes as you said you can use an image for this, write the text and use the image.

  The status button has same functionality with rectangle in the background and text in this.

  Thank you

  Sanjit

• Show highlighting the text button

  I have a DVD menu created in Photoshop that doesn't look like it works when I Preview in Encore. Basic navigation is a series of 5 buttons on the left, with no visible text at first. When a button is activated, the text States, as below:

  

  When the user moves to the next button, this text will disappear and displays the following text.

  As far as I know that the button layers are arranged correctly:

  

  The button group (+) Red contains the Red Stripe layers, which is the button itself. (= 1) Red, which contains the elements of high point, and the red text layer, which is the text "RED STRIPE REQUIREMENTS". The text RED layer has an opacity of 0%. The (= 1) nail red element contains a white line for red and the button fill for text. Each of the 5 buttons work in exactly the same way, by using 5 different colors for each button.

  When I import menu in Encore and preview, it does not match what I want to see. What I do in Photoshop done properly, or do I have to change the way my layer structure is put in place?

  Since there are 5 colors,

  Right; only 3 colors.

  FYI, there is a method to simulate the autoactivate usikng to take you to a menu different than a button colors etc as part of the background image. -Will not work on computers because mouse on does not autoactivate.

  Is there a way to make the text appear and disappear when the button is active without being in the record button?

  N ° other than the method of "false" I describe above.

  Another question that I have is that because the text layer is in folder button, it seems that limit button in again between the left edge of the button on the right edge of the text. It's originally multi-format button to go haywire, like the buttons now overlap.

  The DVD specifications. The bounding box for the button, which does not overlap with another key, is the smallest rectangle that includes all items.

• CS4 Photoshop creation work way w/text on a path

  I don't have a problem with the creation of a work path when working with standard text, but I can't get the opportunity to come in trying to work with the text that I have created following a path. Isn't this possible? If anyone can help! Thank you.

  It should be possible and seems to work even in cs - cs5.

  If you make your way and enter in the path of access, and then with the selected text tool

  you right-click on the type, the option to create Workpath is not available?

  If you have just the active text layer, but not the selected text tool, you should be able

  to go to layer > Type > create Workpath.

  If it still does not work, maybe a screenshot will prepare things up.

  

  MTSTUNER

• How to make a LabelField align right when the text is long?

  In order to make a good LabelField aligned, I create the LabelField with style "FIELD_RIGHT and add it to a value for money, it works when the text can be displayed on a single line." But when the text is long, over a single line, it works well.

  For example, if the text is "ABDEL FARZAD", appears like this:

  

  It looks like aligned left

  How can I get it?

  .

  No guarantee, but instead of Field.RIGHT, try

  FIELD. USE_ALL_WIDTH | DrawStyle.RIGHT

• White blocks appear above the text. Export in the same way.

  Hi all!

  I am under Photoshop 2015.5 and CR 9.6.1
  I have created a flyer and I keep running into this strange issue.

  If I click in a text layer to change the text, this appears perfectly.
  But when I click on get out a white block will appear on a part of the text.
  The block moves at random as well.

  I had the problem of white and black last year block, and blocks never exported.
  They do so.  They export in ' Save as ' and 'save for Web '.

  
  Here is deselected

  

  And now selected

  

  It makes me crazy billy because I can't even export these to my client.
  Here, it is exported.  It copy and stick as well. You can see them randomly everywhere.
  

  And here's what I'm running if it's important.

  

  
  Thank you very much for your help!

  AHA! , the Point, I just

  in the options bar for, Select the text layer and set of anti-aliasing to "strong."