3d photo video card control o en escena 3d

Similar Questions

• "Make window film can not start because your video card does not support the required level of hardware acceleration when you make a movie in windows vista Photo Gallery

  Original title: Hello. I have usedd to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  Hello. I used to be able to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  That's how I did.

  Open a pictuer using the photogallery.

  I have in the photo gsllery window, click make a movie tab.

  with this click it used to drive me to another window, but no more, instead ii have a message: make movie window cannot start because your video card does not support the required level of hardware acceleration or hardware acceleration is not available

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Optimize the hardware acceleration and check if the problem persists.
  a: Click Start > Control Panel > display
  b: click on change display settings , and then click Advanced settings
  c: click the Troubleshooting tab, and then click on change settings of
  d: make sure that the slider hardware acceleration is set to full, and then click ok.
  
  Method 2: update the video drivers and check if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 3: Perform the steps in the article mentioned below and see if the problem occurs.
  http://support.Microsoft.com/kb/923122
  
  Hope this information helps.

• Satellite L50-A-161 - control performance of video card

  Hello

  I bought a Satellite L50-A-161.
  The computer has two graphics cards: a processor intel integrated and a gforce 740 m with 2 GB dedicated.
  Is your computer often uses the video card intel automatically, how do I know the computer to use the gforce always because I often use 3D programs like autocad, photoshop, 3ds design, etc...
  In addition to the question: are we sure the gforce 740 m is a dedicated with 2 GB video card? due to various forums about this computer shared video card

  Thanks for your attention

  As far as I know it s ordered automatically and you do not have possibility to control GPU manually.

• I want to download photos/videos from my 8 GB SanDisk SDHC card on computer but, I have problems...

  I have a Dell Dimension E520 with Windows Vista desktop computer... The disc/sdhc 8 GB card works fine in my camera...   When I put the sdhc card into its slot in my computer to download photos/videos of the card on my computer, everything that happens is a green light near the slot lights up. That's all. Nothing appears on the screen of my computer to guide me on what to do next... This is the first time that I do this...   Are you able to help me?

  It is possible that your media player is not compatible
  with the SDHC technology. The best is maybe to buy
  an external drive that is compatible SDHC or download
  Unit photo using a USB cable.

• Blue screen after the installation of the Radeon HD 3450 video card driver

  Original title: I get a blue screen on vista after installing the drivers for my radeon HD 3450 graphics card, windows 7 works very well

  Hi all, hoping someone can direct me towards a solution...

  Have a 2.8GHz Celeron RAM 2 GB machine, install videocard ATO Radeon HD 3450 AGP.

  Equipped with Windows Vista 32-bit, install ATI driver from the ATI site, all installs OK but on reboot, we get BSOD.

  HOWEVER, same machine, running Windows 7 Professional, all installs them and works fine! (it is the same driver ATI for Vista and 7).

  We tried a new installation of Vista, even tried Vista business and Enterprise editions. Same results.

  Latest system drivers and not BIOS updated avaialable. Vista installation had Enterprise with SP1 and enterprise with Service Pack 2 included.

  I have google, downloaded ATI drivers, reloaded OS and drivers, and little matter what we try Vista causes BSOD and 7 works very well!

  If we try the latest beta version of the ATI driver, he refuses to detect the card in Vista, everything works fine in Win 7.

  Any suggestions? Please? !!

  Hello

  What is the exact error message you get when the blue screen?
  Step 1:
  Try to start the computer in safe mode. Check out the following link.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step 2:
  You can try to disable the video card. Follow the steps.
  (a) click Start.
  (b) in the Search tab, type devmgmt.msc and press to enter.
  Expand c) display adapter and right-click on the Radeon HD 3450 video card.
  (d) click on disable.
  (e) now, close the Device Manager window and restart the computer.
  (f) attempt to start the computer in normal mode.
  (g) go to control panel.
  (h) select programs, and then click programs and features.
  (i) select the package for the ATI Radeon HD in the list and uninstall it.
  (j) restart the computer.
  (k) to start the computer in normal mode.
  (l) go to the Device Manager.
  (m) right click on the graphics card.
  (n) to select Properties, and then click the driver tab.
  (o) now click on roll back driver and check with the question.
  
  You can also check out the following link to download and install the two packages from the link.
  
  If you are using Windows Vista 32-bit, see the link.
  http://support.AMD.com/us/gpudownload/Windows/legacy/pages/legacy-radeonaiw-Vista32.aspx
  For Windows Vista 64-bit, see the link.
  http://support.AMD.com/us/gpudownload/Windows/legacy/pages/legacy-radeonaiw-Vista64.aspx
  
  You can provide us the mini dump file. We can analyze the mini dumps if make you it available to the Skydive or other file sharing sites (such as Media Fire). If you have problems downloading the mini dumps copy
  for the office or in the Documents folder and download them from there.
  ZIP or download the content of the C:\Windows\minidump
  Use in parachute to download files and post photo/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

• Upgrade the video card in X 230 Tablet?

  Hello

  Is this a good or bad idea to move my video card to an NVIDIA GeForce?
  And why?

  Thank you!

  To develop the expresscard solution refer to:

  http://Forum.NotebookReview.com/e-GPU-external-graphics-discussion/418851-DIY-EGPU-experiences.html

  the thead element and then continues here:

  http://Forum.techinferno.com/DIY-e-GPU-projects/2109-DIY-EGPU-experiences-%5Bversion-2-0%5d.html

  And specificallly you want to buy:

  http://www.harmonicinversion.com/index.php?page=shop.product_details&product_id=193&flypage=flypage-...

  for photos of the installation, you can refer to:

  http://item.Taobao.com/item.htm?SPM=2013.1.0.130&ID=15332214194

  I use the PE4L combined 2. 1(b) with a gigabyte gtx 660 ti and get a return of 11 3dmark score of 6000

  with a 230 tablet with i5 cpu 3320 x. It comes with 2 x 4 GB 9 9 9 24 1600 dual channel ram.

  I did play skyrim with all the settings on my x 230 Tablet using the configuration

  total cost of the addition of external chart x 230 tablet would be:

  71 $US for the PE4L kit.

  $50 for a good atx power

  $200 for a decent video card.

  Oh yes edited to add VERY IMPORTANT NOTE! :

  You need to flash your x 230 bios 2.01 or later for expresscard graphics work easily. It is supposed to be

  possible to do with the bios before 2.01 but only using special software (which are included when you get the PE4L

  Kit). I've never had bothered with special software, but given that my x 230 is flashed the BIOS 2.03 and with bios

  2.01 or higher, it is just plug and play without special effort.

  Also another note critical, the PE4L kit consists of 2 small pc boards, attached to the cable of the power supply, motherboard to force the power supply on the printed circuit board has the e for the graphics card pci slot and the cable going to the expresscard adapter. A small cable is supplied with the kit with a red and black wire, this cable connects the power supply card carte pci e slot and is essential to ensure that power is removed from the

  graphics when the 230 x is turned off or goes to sleep. Without this small cable, the graphics card would be

  stay under tension when the 230 x is disabled or sleep, but the graphics of FANS would HAVE of BEING OFF cards! This would cause

  the card to overheat and burn in 30 minutes. Make sure you use the red and black wire connect

  2 pc boards then set the besde connector on the motherboard power map switch cable

  always on the computer control.

• How can I use iPhoto importing photos from card reader?

  Aloha all, I really prefer to use iPhoto, or opening when importing photos from card, but Photos opens whenever I put in my camera card. In the preferences of the Photo, the choice to select what app to use when importing is gray. How can I make iPhoto, or even simply to capture Image open rather than Photos? I put iPhoto preferences to do this, but it seems pictures somehow overrides it. Tips, tips out there? Mahalo

  Try to set the default application to open the General preferences in iPhoto window:

  

  Do you know that iPhoto is no longer supported by Apple print shops so that all projects must be created and controls through Photos?  Just a heads-up.

  If the above does not work, you can kill all apps to open when a camera is connected with the following command in the Terminal application, posted by JadedEye:

  JadedEye

  22 December 2015 09:01

  Re: Prevent DEFINITELY the Photos to open automatically

  in response to leonie

  OK, it worked for me on El Cap

  Open a terminal window

  Type the following in the terminal and press enter

  defaults write currentHost - com.apple.ImageCapture disableHotPlug - bool YES

  (followed by the return key or enter - ed)

  The exit of the terminal.

  Photos will run if you run, but it will not autolaunch on each connection to a camera or the card or reformatted the card.

  If you want to return Photos auto-launch almost everything, use the same command change YES no

  This correction has set my workflow back to normal without Photos of gd lance all the time.

  You must then manually run the application that you want to use with the memory card or camera.

  

• What is an old video card?

  Hi guys,.

  My first question is "What is an old video card"?

  • I use a desktop PC 2013 Dell Intel Core i7 with a nVidia GeForce GTX 650 Ti graphic card.which has 1 GB of on-board graphics memory.
  • I'm also using Windows 10 Pro (64-bit version)
  • I've seen various titles claiming to be sure you download only the good updates and version - but how can check which version of 64-bit is correct for me?
  • It is because my iTunes suggested in the video download plus card 64 bit version (at the time of IOS9.3) - and then was offering me the version.around usual 64-bit time of IOS 9.3.1. Hmmm...

  My second problem/question is how can I get my iPad Mini to show as connected to iTunes?

  • Now my iTunes beeps in recognition of the fact that my iPad Mini is connected via the cable, and I can see the photos in the folder by using File Explorer - but it will not display the icon at the top of iTunes that I need to click on in order to select the movies and music to transfer to the iPad mini...
  • I did used - plug the cable into a different USB port, try another cable... Remove lock file and other suggestions in https://support.apple.com/en-gb/HT204095

  If it is useful or relevant, these issues begins around IOS 9.3

  The label "for older video cards' is something wrong - that this version may be answering questions with older video hardware, it actually is the 32-bit application with a 64-bit Installer.  Even on systems with 'new' video cards, the "older video cards" can be more stable and to avoid problems of compatibility with some applications 3rd party.  Update from Apple system really does not recognize the existence of this version - a Windows 64-bit system two iTunes download webpage and Apple software update will offer the standard 64-bit Installer.  If you have found that the version "for older video cards" worked for an earlier version of iTunes, you may find that when an update is released.

  For questions with detection iDevices correctly, see the responses of Turingtest2 in the habit why iTunes recognize my devices?

• Satellite T130 - how to allocate memory on the video card?

  Hi all

  You just bought a T130 has 4 GB of ram.
  I would attribute this to the video card.

  How can I do this, I do not see it in the BIOS, normally there is a setting to change AGP aperture but I can't.

  Does anyone know how to do this?

  Hello

  This setting is controlled by the driver of the software or the hardware itself and it cannot be changed. However, you really don't need to worry; If more RAM is required (almost always because of the game) it it will get to the need.

• Satellite P30-145: video card driver

  Hi, I have problems to run a particular game on my laptop and support for the game staff have watched my information system and said that I need to update my video card driver, but I have no idea where to start.

  Can someone help me get this sort?

  Thanks in advance.
  xxxxxxxxxxxxxxxxxx

  Toshiba graphics drivers are not similar with the original graphic drivers from manufacturers.
  Original graphics drivers are designed for the use of desktop not laptop. Laptop graphics driver supports protection against overheating and control the performance of the graphics chip. If the temperature rises the driver decreases the performance of the graphics card.
  It is very important because mobile phones have no own graphics card cooling module.

  If you will not find a more recent version of the graphics driver Toshiba or the game will not be able to execute on the graphics driver installed, then you can try the other drivers such as Omega drivers. But note; You can use it at your own risk.

• NB200 - allocated for the 128 MB video card only

  Hello!
  in the specifications, we can allocate 224 MB of memory for the video card, but in windows, we can assign only 128 MB.

  Someone at - it a solution?

  Hello

  The video RAM is shared with the normal RAM (system memory). This means that you can get up to 224 MB of video memory to it of necessary, but if the graphics don't need of more memory, 128 MB are only.

  And, you can change or control by yourself. This is done automatically and it of really not necessary to change something.

• HP Compaq DC7800 SFF - no sound from the HP FX380 Video Card connector

  The above machine was working perfectly until I installed a HP FX380 graphics card.

  I wanted to improve graphics performance as it was slow when you use Adobe Photoshop and did not support OpenGL. The resolution of my screen (1920 x 1200) also seems to challenge the on-board graphics chip.

  I bought a HP NVIDIA Quadro FX380 thought (512 MB) graphics card that using a card in a HP computer HP has been a guarantee of success, but it was not to be!

  The FX380 mounting was easy, but there is only one in the DC 7800 PCI-Express slot, so I had to remove the original graphic adapter (a double buffer x 16 Silicon Image AD02-N card). As far as I see it, there is no audio on this map.

  When I rebooted the new graphics card was correctly recognized, and I was able to install the video drivers with no problems. Graphics performance has also been greatly improved, while the memory system is out, and I activated the OpenGL support in Photoshop. So far so good!

  However, I got an error message saying the SounMax (audio drivers) should be reinstalled, and there is no sound other than the default system beep.

  I tried to reinstall the software SoundMax from various sources, including the recovery partition, but I always get the message "that the audio driver files do support not your hardware.

  The search in Windows XP Device Manager and selecting sound, video and game controllers, audio only I see are several pilots 'NVIDIA High Definition Audio. There is no yellow asterisk.

  I spent several hours online agent HP cat, uninstalling and reinstalling the drivers. I even have the officer to take control of the machine for a while, but still have no sound! I also updated the BIOS OF THE v 1.28 system.

  The obvious answer seems to be that I do not have the correct sound card drivers, but nobody knows what they should be. I don't even know if I have a sound card, not more, or if the NVIDIA card has taken up somehow the system sound card?

  Anyone know if there is a problem using the HP FX380 map in the DC 7800 SFF, or am I missing something somewhere?

  Would it not possible/useful to adapt to a sound card in the PCI vacnt slot? If so, any reccomendations?

  Any advice welcome.

  NN

  Hello:

  I can say that your new video card has an HDMI output port because of the new nVidia HD audio, which now takes the place of your integrated audio system. This is why you have no sound (unless you hold on to a TV or something).

  In any case, the solution is simple (I hope).  As you know the dc7800 is a professional PC intended for use as a home theater and at the time of its manufacture, that there is no video input with HDMI output are supported in these offices of class business.

  I hope that when you installed this new HDMI video card, a new audio BIOS setting appeared in your system configuration in the Advanced menu.

  So please go and see if there is an audio setting boarded, that you can change auto to "Enabled". In the affirmative. Press the F10 key there and at the exit of the BIOS, save settings and exit.

  That should allow both audio devices to operate independently.  You've got audio when HDMI cable is not plugged into a TV and you have HDMI audio when HDMI cable is connected to a TV.

  Please let me know if this is the case.

  Paul

• Satellite 1900-303: Question about upgrade video card

  I have satellite 1900 - 303 and want to somehow upgrade the video card. Is that someone has an idea that is possible or not and if yes how and where to buy a new one.
  Thank you

  Hi Galin,

  It is generally not possible to update the graphics card in a notebook. They are generally adapted to fit the available space and also specially designed drivers that are specific to your model of laptop. It is also quite common for them to use the RAM shared rather than having their own chip RAM (although some later model specifications have dedicated for graphics RAM).

  You can check in your advanced (from Control Panel) display options if you can adjust the RAM available for your graphics card.

  HTH

• hpe-550f upgrade video card

  I'm looking to upgrade the video card on my HPE-550f 57XX Radeon stock. food seems to be the factor limiting. So far, it seems that the Geforce TI 650 would be a good choice. Nobody knows for sure if it is compatible, or if there is a better choice?

  The Radeon HD 7850 seems good but they recommend a 500W power supply and the 550f is 460 I think. I think I can put it for less power in the control center.

  Thank you.

  Jonathan, welcome to the forum.

  The Ti 650 should be compatible with your computer.  However, be sure that the current power supply (PSU) has a 6-pin PCI Express power connector.  This is required at least on the Ti of 650 EVGA.

  You will need to upgrade the PSU to use HD 7850.

  If your problem is solved, please click "accept as a Solution.

• Upgrade the video card

  I have a HP Pavilion h9-1187 windows 64 - bit pc with nvidia GeForce GT 530 by default.  I need to upgrade the video card, but this motherboard has only one of pci express 16 3.0 slot.  Almost all decent video cards require two slots.  I guess that most cards except those in the crossfire, two cards together configuration, must the two slots.  Most of the time, I guess the seller asking two slots due to the space.  Remove the CAP from my pc and possibly void the warranty, can someone tell me what video card width this pc may take.   I have the motherboard COMPANY PEGATRON, the default value.  If you care to recommend a video card decent all 250-300us about feel free.  Thank you. Apologies, but as a newbie I also posted this in the hardware section of the bureau of the forum as well.  I'll delete the entry that is in the wrong part of the forum.

  When a card is listed as having "two slots", this means only that he would hold the PCIe x 16 location and regardless of the slot is adjacent. It does not require a connection to more than the PCIe x 16 slot. Looking at the photo below, the long black slit under the "IPMMB-FM" is the PCIe x 16 graphics card slot. "The slot short slot needs to be empty, then the '2 locations' map can adapt it without connection to this.

  

  Almost any card graphics PCIe 2.0, 2.1 or 3.0 will work on your computer. Please look at these PCIe x 16 graphics cards for a selection in your price range. Please see Guide of Dave_G of a discrete video card selection of useful information on the subject.