3rd part Solutions Dr. available with 3rd party DR Solutions available

Similar Questions

• Problem with WLC and a 3rd-party NMS SNMP AP Assoc/cancellation interruption

  Hello

  I'm troubleshooting an issue, why our NMS is not able to automatically clear an alarm generated trap of an AP that has been separated and is associated with again.

  When debugging on the WLC snmp trap generation, I discovered that when the AP disassociates the WLC sends the trap of bsnAPDisassociated , which is perfectly defined and I can also find in the SNMP Object Navigator. However when the AP reassociates again the WLC sends the ciscoLwappApAssociatedtrap.

  Part 3 NMS is not able to understand it, but our WCS system does, that's why I then took a peek in the MIB file installed.

  I discovered that ciscoLwappApAssociated is a sheet of ciscoLwappApMIBNotifs (1.3.6.1.4.1.9.9.513.0. 4), which I have neither

  Cannot be found in the Cisco SNMP Object Navigator or the downloadable MIB.

  As the MIB in the WCS is a XML file I didn't how to get information in the 3rd-party NMS.

  Anyone have any idea on how to solve this problem or there at - it update CISCO-LWAPP-AP-MIB available somewhere?

  Our WLCs are running the latest version of the software (7.0.116.0) as well as our WCS (7.0.172.0)

  Thanks in advance!

  Kind regards

  Patrick

  Such discrepancies sometimes occur. Best is a matter of TAC in order to tackle the problem through a bug or have a new MIB published on cisco.com if necessary

• How Oracle Clusterware Oracle RAC and 3rd-party Clustering with them

  I have some questions on how Oracle, Oracle RAC and 3^rd party clustering CLusterware fit between them.

  Q1. My understanding is that the Infrastructure Grid Oracle Clusterware is Oracle's Clustering solution that allows applications to cluster? that is, it is a general clusterware solution to compete with those already on the market. Is this correct?

  Q2. So why CARS is necessary for the Oracle cluster databases? An Oracle database is not just considered one application like any other? So why can not just use you GI / Clusterware to gather what you would do for any other application? Why so you need RAC to the Clusterware Summit?

  Q3. Is it is possible to combine an Oracle database using 3^rd party of clustering and not use Oracle Clusterware and CARS at all that is can you say cluster, an Oracle database using say Sun Clusters, Clustering AIX or Linux native same clustering?

  Q4. If the RAC is purely for Oracle Cluster databases - what is with the title "Real Application Clusters"? What's real on this subject?, what to ask?

  Q5. I also read that RAC can use 3^rd party of clustering. However if you decide that this is the case, then you need to install Oracle Clusterware when even (I think for interconnection must be created to allow the merger with Cache between Instances of node?).

  Is this the case?  If yes why never bore you with 3^rd party clusters? -Since you will have to install Oracle Clustering anyway - and I probably have to license (all I can think about is the scenario that you already have a cluster of 3^rd party in place and you decide that you need to use the same material for a database cluster)?

  All wisdom greatly appreciated,

  Jim

  Yes, with 10g, you had to use the CRS, and with 11g, to use the GI.  For 9i RAC, you would use Verits Cluster and Sun Cluster or anything else.

  11g RAC to GI.  As above, you can use clusterware extra if needed.  I gave the example above where to a 10g RAC we used the CRS to the cluster database/listener/vip and allowing groups of volume and filesystem in HACMP cluster.  File systems were not shared, but could switch to another node failure node, who has been treated by HACMP.  The volume of the groups containing the raw devices were shared volume groups.  For 11g, I never used extra clusterware on top of CRS and have always used ASM which is part of the GI.

  The application provider only certified database to run on 10g on AIX with raw devices.  What is strange about that?  It would be unusual that you probably expect to use ASM instead of raw devices, but it is what it is.

  See the following Note of Oracle for more information: using Oracle Clusterware with vendor Clusterware FAQ (Doc ID 332257.1)

  It is perhaps easier to explain if you can explain what problem you are trying to solve?

• Overlapping address space question - how to NAT inside the traffic to one address different range on SAA for comms with 3rd party VPN?

  We already have a connectivity of IPSEC VPN site to site with a 3rd party.

  They must be able to access a couple of servers on our internal network but the problem, it's the subnet these servers are hosted on clashes with the address space they already used elsewhere. Thus, they asked if we can put in place a new subnet and have our firewall (running v7.2) ASA NAT the traffic to and from our servers ' real' internal addresses.

  for example

  • 3rd party 10.10.10.0/24 subnet
  • Our subnet 10.20.20.0/24 (but this clashes with the 3rd part of the address elsewhwere space)
  • Our 'real' internal server addresses are 10.20.20.1 and 10.20.20.2

  How do we setup NAT on our ASA translating internal addresses 'real' of these servers for some other addresses that don't clash?

  that is that the 3rd party is concerned, they would simply have to communicate with this 'new' subnet, say, 192.168.20.0/24 and our ASA firewall NAT traffic accordingly to allow some comms unfold?

  (And it should affect only comms on these servers for the 3rd party - NOT for one of our other multiple VPN connections! "And should not affect the other comms from the servers themselves!).

  That's what I've tried so far, for one of the servers, without success:

  On ASA:

  !

  access-list 1 permit line 3rdpartysite extended ip host 192.168.20.1 10.10.10.0 255.255.255.0
  !
  access-list SERVER-NAT line 1 permit extended ip host 10.20.20.1 10.10.10.0 255.255.255.0
  !
  static (inside, outside) 192.168.20.1 public - access NAT SERVER list

  "sh xlate" indicates:

  192.168.20.1 global local 10.20.20.1

  Can someone help with the necessary NAT configurations on the ASA?

  Thank you!

  'Clear xlate' after you have configured NAT statements?

  When you try to ping from the 10.20.20.1, get it to the ASA? You have an ACL on this interface that would block the ping? Also, can you run capture packets on the ASA to see if the ASA receives even the traffic?

  What is the subnet mask of the 10.20.20.1 host? I guess it's 255.255.255.0?

  You don't need something specific on the ASA with regard to the delivery of the 192.168.20.1.

• 3rd party such as san replication solution: strategy

  Dear Experts,

  Can you please share some of your ideas.

  Oracle DataGuard comes free with Oracle Enterprise Edition (EE). The only reason why a company could NOT use Oracle DataGuard is because they are not on the ERA and the cost of upgrading to EE just to use DataGuard does not justify the price.

  With 3rd party such as san replication solution. (for example hp3par)

  It is obvious that the all-flash backup can be quick.

  What should be the strategy to have DR site get a few seconds, if the primary site failed for some reason any

  1. daily incremental backup with RMAN. And archive backup runs for every 1 minutes

  2. so that the DR site facing up and running within 60 seconds, it still requires too much time to restore the database on remote site and have archive APPLIED setpoint

  What could be the solution with san replication? RTO = 60 seconds

  Thanks ivw

  Hello

  Great topic, I'll try to summarize all this in a post.

  I have worked with HP EVA for a few years and I must say that I have used many of the features of replication - HP EVA Business Copy (local replication) and HP EVA continues access (remote replication) as well - for the oracle database and other applications as well. Most storage systems use copy-on-write to create two points in time of the LUN (snapshot) image or clone LUN using cow again.

  Of course, like other people, said earlier the replication SAN is block based, in the same way with Dataguard, you have synchronous and asynchronous replication. When your data is written to the data files it usually goes in storage cache and then is pushed down the disc as soon as it will be more efficient, at the same point, replication is pushing data to the Dominican Republic. The same way with Dataguard if you use synchronous replication that you won't get you "speedy return" until the blocks of primary storage has been written for DR storage system.

  I never had problems with replication to be honest. I used a lot of copy of databases of production using local replication. For example if you want to quickly test a patch on the production system, you can create a snapshot that will only increase with the amount of changes you have made. The only concern is nowadays though we use ASM so if your diskgroup names are the same in DEV that the PROD does not work the approach that I mention.

  Regarding remote replication - because you do not have Dataguard more every time you failover to the Dominican Republic to your database will pass by instance recovery!

  Regardless of the type of replication is not the speed but the latency of the network - SAN or Dataguard, you will always have a penalty of a long replication distance. The biggest typical WAN latency factor is the speed of light, via fiber optic cable, which is about 124 miles per millisecond. Based on that you can calculate what would be the round-trip latency time.

  Indeed for many people SE installation choose DBvisit Standby to manage their databases on hold. I did the installation of the couple and it is really simple and works out of the box. However, your RPO depends on how often you switch your redologs and how many times you ship them to the backup site. You must configure dbvisit to spend with each log file (all the 5,10,15 minutes) OR configure archive_lag_target to configure OR use both at the same time. Also, you can store a copy of the archivelogs on a separate location just in case, for example, an NFS share.

  And finally my five cents on RAC on Clusters of extended - be careful with this one. Each of the nodes in the extended database cluster need access to both storage (primary and DR) systems. You must also third location to store a voting quorum disk, usually an NFS share. It is also very important to note that the latency between the nodes is of crucial importance due to global cache activity.

  Kind regards

  EVS

• Premiere Pro CC 2015 ripple Edit Major Lag with 3rd-party Audio effects

  Greetings,

  I upgraded to CC 2015 from 2014 CC yesterday. Opens the project I had worked on to discover that when I realize a montage by waving there is a gap of 7 to 10 seconds before I can resume playback. When I edit by ripple the program monitor past from the view of the only program to place 2 view that shows you the exit point of the previous element and point to the next clip. At least that is what I think it does. It is difficult to say because as soon as I ripple the program monitor hangs for several seconds.

  It seems that it is a problem with the audio effects part that I loaded in the Audio Mixer of the track. I use a Native Instruments compressor and limiter vladg/sound. I use some effects audio stocks like left fill with law, right to complete with the left, equalizer and multiband compressor. I think I saw somewhere else on these forums that there are other issues associated with the allowed effects of iZotope in first. If I create a new sequence in the same project without audio effects, ripple edit works very well. This is a major issue because I have been using these audio effects in the Panel mixer Audio track for many months.

  I have no problems with these 3rd party in 2014 CC Prem audio effects.

  This is a recording of the program screen. https://Vimeo.com/131549297

  Here are my system specs:

  First Pro CC 2015

  Win 7 64 bit (up to date)

  I7 970

  24 GB Ram

  NVIDIA 970GTX (driver)

  500 GB SSD

  Internal 2 TB

  2 x internal 4TB

  3 TB internal

  12 to RAID 5 via USB 3.0

  USB 2.0 and 3.0 readers

  Audio device FireWire (M-AUDIO FireWire1814)... even if I'm not using it for reading. It is connected.

  Images East of C100 H.264. MTS, JPEG. MOV EI, JPG still images, simple titles in Premiere Pro and color mattes.

  Multiband compressor is certainly a problem with PP 2015 and trimming.  Try to delete this one and see how it goes.  Report results.

• Can I migrate my 3rd party applications on my mac pro with a new IMac with El Capitan Lion?

  I have many obsolete applications (Final Cut Pro 7 etc.) and applications 3rd party (Ms Office, final version of the project, etc.).  Can I move ALL of my external hard drive, which is a carbon copy of transfer cleaner everything on my mac pro?

  Yes, but they may be too old to work with El Capitan.  Look at RoaringApps.com to see if there is any inconsistency with these applications.

  

• shortcut screen locking with 3rd party keyboard

  I have a HP external keyboard attached to my mac and I was wondering how to lock the screen as you would with Windows (windows + L) or Linux (Crtl + Alt + L) so I can get up and leave my computer. Is it possible to do it without 3rd party software?

  Preferences system--> Security Privacy &--> need password _ minutes after the start of the screensaver or of sleep

  Once you set that you can put the computer to sleep, thus initiating the lock screen when you "wake up" by pressing Command + Option + Eject.  If you click on the padlock in the lower left pane, you can check the second box and set a message for your lock screen.  It is an option.

• Calibration Toolkit with 3rd party ECU measurement and CAN interface

  I would use the NI ECU Measurement and Calibration Toolkit with an NI CAN interface.  The interface devices supporting J2534 are very common.  The NI ECU Meas and Cal Toolkit allow this? If so, how does one time on another interface CAN interface to the Toolbox?

  The NI ECU Measurement and Calibration Toolkit National Instruments Hardware only supports.

  If you want to discuss the possibility of using any 3rd party hardware, please contact your representative local.

• OK for use with a 3rd party charger?

  Wanted to buy the Motorola chargerof origin, but it is out of stock.

  I found this Blackberry folding blade charger for Playbook

  Can I use this charger for motorcycle G 2nd Gen? People say it's a quick charger, I don't know if this will eventually be a problem.

  Plug

  Input voltage: 110-240V AC

  Output voltage: 5V DC

  Maximum output current: 1.80 has

  @Link1320

  We tested the phone with our range of chargers. It can work, but I can't recommend using with another 3rd party charger.

  Mark

  Forums Manager

• I want to develop an application with the Ribbon UI by using a 3rd party control

  I want to develop an application with the user interface of the Ribbon using a 3rd party control, that I have to get a license from Microsoft? How?

  original title: license of the Ribbon user interface

  I want to develop an application with the user interface of the Ribbon using a 3rd party control, that I have to get a license from Microsoft? How?

  The only a link I found on this page does not (http://msdn.microsoft.com/en-US/office/aa973809).

• Integration with 3rd Party App

  We currently use a 3rd party called media 1 channel to carry out the investigation or to submit and Enter to Win forms.  Now, that exist outside of the Eloqua platform.  Is there a way to integrate this information?  Have send their form, survey, etc. flow directly in Eloqua.  I talk about them using a form Eloqua and here are their concerns:

  "Eloqua had an open API, we could use to send data in the database? This would probably include a function we call that sends to your server of an object that contains the data that is appropriate; probably json or other type that when received them by your server would be analyzed and added to the critical database.

  If I'm wrong and that you do not have this form of API; in the txt file you provided the submission form called a file, we could potentially call it directly within our applications and Web sites and pass it the correct information, but we need to coordinate the information exactly. In addition we are a validation uncompressed js file so we can ensure that the validation is rewritten correctly to our projects. »

  Hi Megan,

  Eloqua has many options with regard to sending data to the Eloqua system. You can get all data from any system for contacts and send it to Eloqua. Look at the platform of the building on The Eloqua - A Resource Guide to get started. Indeed, if nothing else, you can transfer the form submiited from your site or application data directly in Eloqua and perform various other process forms: overview of processing &.

  I hope this helps.

  Thank you

  Amit

• 3rd party Cookies will disappear with IE9 and Firefox 4? Impact on Marketing Automation?

  People, was curious to know how other people are considering (or have thoughts) all about losing third-party tracking with more recent browsers cookie?

  
  Looks like this could be very disruptive for all providers of marketing automation, or at least some sort of a switch to a party cookie should be first tracking system. If I read correctly, those systems it will be progressive, profiling, some stats CTR and certainly notification Web site visitor would be affected.
  
  More info here: http://paidcontent.org/article/419-mozilla-ceo-do-not-track-option-will-be-in-firefox-4/
  
  Thoughts?

  With the Firefox solution, we do nothing, since it requires their header and sites to work together. The challenge with Firefox and their solution is that the addition as a header-not-track, is that it requires browsers and sites to implement it to be fully effective. In other words, you can set the-no-track disengage all you like to feature in your Firefox browser, but if Web sites that track chooses to ignore the header-no-trail of Mozilla it will not do anything good. We are not ignoring the issue of Firefox, but believe that their solution is not one that will provide the appropriate consumer control.

  Regarding IE, they will be using a local list that the user must fill with sites that they do not want to be tracked on. There is not much we can do about that the consumer has the choice already today to block ALL cookies regardless of the type of part. This feature gives just more detailed control to the consumer at the level of the web address vs just block all third party cookies.

  We tested 'keep my Op-out Google' and it does not affect email and web click followed. It is only monitoring online ads.

  Finally, we are looking at or not stay with third-party cookie tracking or move to the first party. You can imagine my choice but there will be a huge change in how customers work must pass if we choose one over the other. More to come as soon as this.

  -Dennis

• vCloud SSO with a 3rd party identity provider?

  I have read that vCloud can be linked to vCenter which vCenter becomes the identity provider and vCloud Gets a SAML him for UNIQUE authentication token. I would like to use vCloud with a 3rd party identity provider that is supported by the CAs and also provide vCloud a SAML token.

  Is it possible to use an identity 3rd party with vCloud provider?

  N °

  Think about it this way as a string of past tasks.  The order is just different for both processes.

  System Administrators--> Login system--> vSphere SSO (User Identification)--> 3rd party Identity Provider (LDAP or SAML for authenticating)--> vCloud Director (authorization and access control)

  Users in the Organization--> Organization Login--> provider of 3rd party SAML (authentication)--> vCloud Director (authorization and access control)

• I have some 3rd party widgets I want to use with Muse. When I try to import this Muse gives an error: 276 (number of unexpected format. Check if there is a newer version of Muse). My current version of the Muse is v7.4 please guide properly.

  I have some 3rd party widgets I want to use with Muse. When I try to import this Muse gives an error: 276 (number of unexpected format. Check if there is a newer version of Muse). My current version of the Muse is v7.4

  Please guide properly.

  I use a 64-bit computer. I discovered the widgets were not made for earlier versions such as v7.4 had no 'library' to import these widgets to.

  Thanks for the reply but. I appreciate it.

• 3rd party Software to integrate with the current application

  Hi all
  
  Could you please me (simple steps-;)) how to use 3rd party software to integrate with current (ATG) application.)
  
  Example: cybersource (validate the address and the credit card), for this what are the steps we must follow and we need create components to configure the software.
  
  I'd appreciate if you share the resolution, it will be useful to others too.
  
  Kind regards
  Jyothi.MJ

  I think it would be a good start

  http://www.Scribd.com/ron_gelinas/d/64173966/41-integrating-CyberSource-with-ATG-Commerce

  Thank you