Calibration Toolkit with 3rd party ECU measurement and CAN interface

Similar Questions

• Toolkit ECU Measurement and Calibration does not run when I build an executable.

  I did a LabVIEW application that communicates with a target using CCP (with ECU Measurement and Calibration Toolkit).

  The source code of LabVIEW works OK, but when I create a .exe file, it does not work.

  I tried to copy the Toolkit ECU Measurement and Calibration dll:s in the same folder as the .exe file, but I still get error messages.

  What should I do to get the run .exe file?

  Do you have you created an "Installer" and installed on the laptop?

  If yes have you selected this Toolkit (ECU Measurement and Calibration Toolkit) to add to the installer when creating the same thing?

  Just try this approach once...

• I can't seem to get the easy transfer Windows from Windows Vista to play with Windows 7 easy transfer and can't seem to install the transfer Windows 7 because it gives me only a 32-bit version to install.

  Windows Easy Transfer of 64-bit to 32-bit, or vice versa

  Hello

  I'm trying to fix my settings my current machien to a W7 VM user to make sure that I have the transfer settings and I get all the information I want.  My machine is 64 bit, but the VM is 32-bit.  I can't seem to get the easy transfer Windows from Windows Vista to play with Windows 7 easy transfer and can't seem to install the transfer Windows 7 because it gives me only a 32-bit version to install...

  How I have a 64-bit Windows 7 Easy Transfer to install and if I get one to install and build a transfer saved the data file has there 'restore' on a 32-bit Windows?

  George George P Botuwell, programmer

  Hi George P Boutwell,.

  Thank you for using answers Forum.

  I think that VMware has a 64-bit/function version. You will need to contact them to verify this.
  64-bit to 32-bit is not supported by Windows Easy Transfer, as far as I know.

  I hope this helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• shortcut screen locking with 3rd party keyboard

  I have a HP external keyboard attached to my mac and I was wondering how to lock the screen as you would with Windows (windows + L) or Linux (Crtl + Alt + L) so I can get up and leave my computer. Is it possible to do it without 3rd party software?

  Preferences system--> Security Privacy &--> need password _ minutes after the start of the screensaver or of sleep

  Once you set that you can put the computer to sleep, thus initiating the lock screen when you "wake up" by pressing Command + Option + Eject.  If you click on the padlock in the lower left pane, you can check the second box and set a message for your lock screen.  It is an option.

• Overlapping address space question - how to NAT inside the traffic to one address different range on SAA for comms with 3rd party VPN?

  We already have a connectivity of IPSEC VPN site to site with a 3rd party.

  They must be able to access a couple of servers on our internal network but the problem, it's the subnet these servers are hosted on clashes with the address space they already used elsewhere. Thus, they asked if we can put in place a new subnet and have our firewall (running v7.2) ASA NAT the traffic to and from our servers ' real' internal addresses.

  for example

  • 3rd party 10.10.10.0/24 subnet
  • Our subnet 10.20.20.0/24 (but this clashes with the 3rd part of the address elsewhwere space)
  • Our 'real' internal server addresses are 10.20.20.1 and 10.20.20.2

  How do we setup NAT on our ASA translating internal addresses 'real' of these servers for some other addresses that don't clash?

  that is that the 3rd party is concerned, they would simply have to communicate with this 'new' subnet, say, 192.168.20.0/24 and our ASA firewall NAT traffic accordingly to allow some comms unfold?

  (And it should affect only comms on these servers for the 3rd party - NOT for one of our other multiple VPN connections! "And should not affect the other comms from the servers themselves!).

  That's what I've tried so far, for one of the servers, without success:

  On ASA:

  !

  access-list 1 permit line 3rdpartysite extended ip host 192.168.20.1 10.10.10.0 255.255.255.0
  !
  access-list SERVER-NAT line 1 permit extended ip host 10.20.20.1 10.10.10.0 255.255.255.0
  !
  static (inside, outside) 192.168.20.1 public - access NAT SERVER list

  "sh xlate" indicates:

  192.168.20.1 global local 10.20.20.1

  Can someone help with the necessary NAT configurations on the ASA?

  Thank you!

  'Clear xlate' after you have configured NAT statements?

  When you try to ping from the 10.20.20.1, get it to the ASA? You have an ACL on this interface that would block the ping? Also, can you run capture packets on the ASA to see if the ASA receives even the traffic?

  What is the subnet mask of the 10.20.20.1 host? I guess it's 255.255.255.0?

  You don't need something specific on the ASA with regard to the delivery of the 192.168.20.1.

• Integration with 3rd Party App

  We currently use a 3rd party called media 1 channel to carry out the investigation or to submit and Enter to Win forms.  Now, that exist outside of the Eloqua platform.  Is there a way to integrate this information?  Have send their form, survey, etc. flow directly in Eloqua.  I talk about them using a form Eloqua and here are their concerns:

  "Eloqua had an open API, we could use to send data in the database? This would probably include a function we call that sends to your server of an object that contains the data that is appropriate; probably json or other type that when received them by your server would be analyzed and added to the critical database.

  If I'm wrong and that you do not have this form of API; in the txt file you provided the submission form called a file, we could potentially call it directly within our applications and Web sites and pass it the correct information, but we need to coordinate the information exactly. In addition we are a validation uncompressed js file so we can ensure that the validation is rewritten correctly to our projects. »

  Hi Megan,

  Eloqua has many options with regard to sending data to the Eloqua system. You can get all data from any system for contacts and send it to Eloqua. Look at the platform of the building on The Eloqua - A Resource Guide to get started. Indeed, if nothing else, you can transfer the form submiited from your site or application data directly in Eloqua and perform various other process forms: overview of processing &.

  I hope this helps.

  Thank you

  Amit

• Premiere Pro CC 2015 ripple Edit Major Lag with 3rd-party Audio effects

  Greetings,

  I upgraded to CC 2015 from 2014 CC yesterday. Opens the project I had worked on to discover that when I realize a montage by waving there is a gap of 7 to 10 seconds before I can resume playback. When I edit by ripple the program monitor past from the view of the only program to place 2 view that shows you the exit point of the previous element and point to the next clip. At least that is what I think it does. It is difficult to say because as soon as I ripple the program monitor hangs for several seconds.

  It seems that it is a problem with the audio effects part that I loaded in the Audio Mixer of the track. I use a Native Instruments compressor and limiter vladg/sound. I use some effects audio stocks like left fill with law, right to complete with the left, equalizer and multiband compressor. I think I saw somewhere else on these forums that there are other issues associated with the allowed effects of iZotope in first. If I create a new sequence in the same project without audio effects, ripple edit works very well. This is a major issue because I have been using these audio effects in the Panel mixer Audio track for many months.

  I have no problems with these 3rd party in 2014 CC Prem audio effects.

  This is a recording of the program screen. https://Vimeo.com/131549297

  Here are my system specs:

  First Pro CC 2015

  Win 7 64 bit (up to date)

  I7 970

  24 GB Ram

  NVIDIA 970GTX (driver)

  500 GB SSD

  Internal 2 TB

  2 x internal 4TB

  3 TB internal

  12 to RAID 5 via USB 3.0

  USB 2.0 and 3.0 readers

  Audio device FireWire (M-AUDIO FireWire1814)... even if I'm not using it for reading. It is connected.

  Images East of C100 H.264. MTS, JPEG. MOV EI, JPG still images, simple titles in Premiere Pro and color mattes.

  Multiband compressor is certainly a problem with PP 2015 and trimming.  Try to delete this one and see how it goes.  Report results.

• PDF Conversion files do not install with 3rd party software.

  I used the software and data base of third party software (field office) and Realfast forms of contract.  The ability to PDF coverter will not install during the installation of the software.  (I installed AgentOffice allowing installation to move on to the pdf section.)  With Realfast, it seems to install, but does not work.)  I had to communicate with these two software vendors and have spent a lot of time remove and reinstall the software without success.  Support think it's something in my system.

  I even installed PrimoPDF, a free PDF conversion tool, to work around the problem.  However, even after a successful installation, the printer is not with my printers.  Therefore, I have no way to convert files to PDF format.    Help, please.

  Hello caryrealestate,

  ·         What is the exact error that you get while trying to install this component?

  ·         Have you checked whether the software is compatible with Windows 7?

  You can follow the link below to check if the contact PDF database you are tying to install is compatible with Vista.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  Alternatively, you can try to install the database in XP compatibility mode and check if it works.

  Here is an article that will give you more information about this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  In any case, if you do not all work programmes for conversion to PDF, you can consider converting by using Office (in case if you want to convert word files to PDF).

  See the links below:

  Office 2003:

  http://Office.Microsoft.com/en-us/Word/HA011683331033.aspx

  Office 2007:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=4d951911-3e7e-4AE6-B059-a2e79ed87041&displaylang=en

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• the options under the Privacy panel allow no choice on cookies for example block 3rd party cookies. How can I block 3rd party cookies?

  run firefox 4.0.1. Vista Windows

  On another computer, I have another provision on confidentiality with options panel to block 3rd party cookies. I run the same systems, as shown above.

  At the top of the Privacy panel, choose "Use the custom settings for history", and you will then be able to set the cookie, but you love them.

• Error-301034 with Toolkit ECU Measurement and Calibration

  I get a message error 301034 occurred at MC Daq Initialize when I try to run my program.

  

  I checked my measure names are correctly spelled (special case) and the a2l file is a copy of one that is used on other testbed that uses sofa. I copied the a2l file once again and reinstalled but the error is the same.

  I checked the CRO and DTOS and they are correct.

  Any ideas what may be the cause?

  Hello, AAM,.

  You try to use a feature name in the DAQ initialize?  You said that you got the error on initialization of data acquisition and the error indicates that the measure was not found... but you've posted a feature here...

  Could you also make sure that the COMPU_METHOD_27 is defined in your A2L.  It should be (something) defined as follows:

  / COMPU_METHOD COMPU_METHOD_27 to start «»
  RAT_FUNC «6.2% ' «»
  0 1 0 0 0 1 COEFFS
  /end COMPU_METHOD

  Have a great week.

• 3rd part Solutions Dr. available with 3rd party DR Solutions available

  Dear Experts,

  We have Oracle standard Edition 12 c

  With Oracle standard Edition there is no guardian of data available.

  Now, what are the 3 rd party Solutions DR available?

  How about dbvisit eve? Did someone used before?

  These solutions can provide Solution DR? :

  • SAN replication.
  • MQ disaster recovery solution

  You please have some of your ideas in the present.

  Thanks in advance.

  Kind regards

  IVW

  Hello;

  There is a review of it here:

  https://Oracle-base.com/blog/2012/01/10/dbvisit-standby/

  and

  DBVisit watch review | Dead-Simple solutions

  I doubt, that they stayed in the business, if it did not work.

  Best regards

  mseberg

• Management Opt Outs with 3rd party

  Our company works with several partners who offer our services to their clients. We work with a partner who now wants to send an email to their list of customers to promote our service. My question is with respect to the CAN-SPAM. We need to provide our partners with OUR list of derogations to delete their email? My instinct is to say no because the e-mail comes from the partner and not us. Any help on this is greatly appreciated!

  Hi Krista,

  So if I understand, another company will send an email to promote your service... in general we end up making such a case is double... provide our clients with a third party opt out link to us so that contacts can tell us that they do not want us to parties third most and then a direct link for people to not receive emails in the future.  Now, for us, it is a rule of confidentiality of company.  In regards to your opt-out/remove list, whenever we are promoting to a third party, we need to their dismantling as well file because if one of the people who may have given up your email get this email, they can complain... better prevent

• 10.11.3 mission Control "Show Desktop" does not work with 3rd party keyboard

  I use a KENIMBENI Multi sync Bluetooth keyboard as seems to be the best solution when you want a wireless keyboard with a numeric keypad on a Mac.

  The KENIMBENI keyboard has its own combination of keys rather than Apple-command 'Mission Control' 'Show desktop '. It was working fine until 10.11.2. But now, after upgrading to 10.11.3, I find no way to make this button (or any other combination of the command 'Show desktop') works. Some key or combination of keys I enter the keyboard and/or the Mission Control preferences pane, will be shown on the screen, but the system does not react to it. I also tried switching to use several spaces to use a single space extending on my two monitors, assuming that it could have to do with behavior change - but none of this helps.

  I have an another Mac Apple original wired keyboard, and here the command-'Mission Control' combo works fine as expected.

  Can any that confirm - and perhaps know no work around? I'm a little old school management Finder and file and so use orders 'Show desktop' several times a day. Thanks in advance for your suggestions!

  You should discuss with the developer of the material. If it works for your OS with material Mac the fault lies with the proponent to provide a usable instance of this device with a newer OS, if they wish. In addition, we use a Logitech wireless keyboard solution full size and they are solar powered so no battery and no problems so far.

  http://www.KANEX.com/contact/TechSupport

• WRT160Nv3 problem with 3rd party applications of internet Apple & Dropbox

  Here's my situation, had a WRT54G Router for several years, he kept dropping my internet connection and after several updates of the firmware, I decided to move to the WRT160N. These two works of apple computers at lightning fast speed, same xbox 360 which is appoximatly 40 ft, in a basement works fast, netflix streaming that is built into my blu ray player works as well. The problem I have with Itunes and Dropbox, both use the internet to connect, but every time that I try to connect I get internet connection errors. My macbook pro supports a/b/g/n wireless, so I'm not sure of what could be the issue. I have the latest version of Itunes as dropbox.

  Also, I checked my router settings, he is currently in mixed mode. Do you think I would need to change to mixed mode B - G, it seems kind of silly to have a N Router and only being able to use G.  Other experiences with this problem?

  Thanks, I was able to solve this problem by configuring the proxies on my internal airport. It turns out that I had information specific web proxies, once I removed them and not the box of proxie, everything was back to normal. Now, without doubt, I realized that my old router probably would have worked very well, I didn't realize this in the first place.

• Log Insight integration with 3rd party Franken

  Anyone who sets up journal Insight to integrate with a third party like QRadar SIEM so that your VMware assigned priority to the Insight Journal events get passed to your SIEM?  The caveats with this?

  http://KB.VMware.com/kb/2053382