4.2 DOC BUG: BRANCH_TO_PAGE_ACCEPT undocumented

Similar Questions

• 4.2 DOC BUG: all about the application process

  "There is an error in Oracle Application Express Application Builder User Guide version 4.2 §8.8.1 " "on the implementation of the application process":

  A process On Demand is a special type of procedure of demand that has a Point of On Demand process and executes when it is called from a process On demand page level or a browser AJAX call. On-demand processes are useful when you have logic of PL/SQL that you want to run different execution points on several pages.

  At the request of the process generally must be created on a page and not at the level of the application. On request, process created at the application level are created with an initial authorization scheme of must not be Public user. This prohibits the process invoked with users in authenticated sessions.

  As it is perfectly possible (and desirable) at the request of the application process to be invoked, [that] by authenticated users, this should probably read:

  A process On Demand is a special type of procedure of demand that has a Point of On Demand process and executes when it is called from a process On demand page level or a browser AJAX call. On-demand processes are useful when you have logic of PL/SQL that you want to run different execution points on several pages.

  At the request of the process generally must be created on a page and not at the level of the application. On request, process created at the application level are created with an initial authorization scheme of must not be Public user. This forbidden process be invoked from users not authenticated sessions.

  In addition, the second paragraph is a new addition to the documentation for APEX 4.2. What is the reasoning for not creating processes on request at the application level? I've used them for a few years as a way to provide reusable, application- wide (for example, the file downloads and the AJAX content) only items authenticated Apex sessions.

  Hello

  Thanks again. I added a note to the 5.0 docs.

  It is certainly very good create processes at the level of applications On Demand. However, if a process is tied to a single page, only, it is immediately obvious that the process belongs to the interface of this page. It's good from a maintenance point of view, because if you only use application-level processes, it may be more difficult to determine if the process is still in use and where it is called from.

  Kind regards

  Christian

• RV180W and counter traffic WAN (bug?)

  Hello!

  I have rv180w (firmware 1.0.1.9) and 1 Gbps internet.

  When I turn the traffic WAN, WAN speed meter down to 100 Mbps.

  I have not found any suggestions in the official documentation.

  Is this a feature bug or undocumented?

  Hello, this is a documented problem

  WAN Download won't exceed 60Mbps for the RV180 when WAN Traffic Meter is enable.
  
  WAN Download won't exceed 90Mbps for the RV180W when WAN Traffic Meter is enable.
  
  - Firmware's: 1.0.0.30 and 1.0.1.9;
  
  CSCtz81982
  
  
  
  
  -Tom
  Please evaluate the useful messages
  		   

• several monitors, anchored app automatically change screen

  Hello

  I want to describe what looks like a bug - or undocumented - feature I have meet several times.

  I work with 2 monitors (left and right). I use to work mainly on the right monitor, with Mail and Skype on the left.
  I use the Win8 Skype App from the store, anchored on the screen left and Outlook 2010 full screen on the side - so that they share the screen.

  The question is if I activate other apps or passage to the modern user interface to open another application of the RIGHT of the screen (if I have another application to open getting on the upper left corner or activation of the user interface of the bot left corner), Skype is now anchored on the RIGHT screen automatically, forcing me to move back to the left and moved.

  No problem if I have this on the left screen or use the Start button to access the modern user interface. (Start button opens the modern UI on the monitor where the application is grounded - everywhere where I've anchor it)

  There's a config or a workaround or a current patch for it?
  I tend to make the mistake all the time that I'm looking for especially on the right screen. I don't want it to change everything I open the modern user interface to the left or to the right.

  Thank you

  Hi Nicolas,.

  The way he is now, it seems the app moves to some early screen screen is available on. It isn't a work around for this and it seems to work as it should because the app is part of the start screen.

• zoom iOS question 9 with machining centers

  Everyone knows that the new iOS 9 broke the functionality of work center in PeopleSoft when connected via an iPad or iPhone? Specifically when you go to a work center it causes the page zoom Way in and not allow you to zoom out.

  Thank you,

  Greg Stanis
  Director, HR Information systems
  The University of Missouri System

  Hi Greg - by our discussion on the HEUG forum. Hope this helps people who are not members of the HEUG. Thank you!

  This problem has been reported on My Oracle Support. I saw that it was a question broad system (iOS device 9) in all applications (CS, HCM, FSCM, CRM) and regardless of the versions of the tools.

  See Doc/Bug Ids for the updates to Oracle:

  DOC ID:2057957.1 - E - PIA Peoplesoft classic Pages didn't properly in IOS 9

  Bug 21626379 - IOS 9: PAGES CLASSICS ARE NOT RENDERED CORRECTLY

• One group of standby Redo Log is ACTIVE

  Hi guys,.

  I have successfully configured a custodian of data between a primary database (oradb) and a database ensures Physics (oradb_s8).

  However, I have noticed that in V$ STANDBY_LOG only one group of standby Redo Log is ACTIVE, regardless of how many times I go log in the primary database.

  ' The following was stated in the documentation:

  When a switch of newspaper occurs on the database of the source again, redo incoming is then written to the next group of waiting for redo log, and the group used newspaper before again Eve is archived by a foreground ARCn process.

  Source.

  So, I guess that group of standby Redo Log is turned on when the Redo Log is enabled in the primary database.

  Could you please clarify it for me?

  It's the Oracle 11 g R2 (11.2.0.1) on Red Hat Server 5.2.

  On autonomy in standby:

  SQL > SELECT GROUP #, THREAD #, SEQUENCE #, ARCHIVED, STATUS FROM V$ STANDBY_LOG

  GROUP # THREAD # SEQUENCE # ARC STATUS

  ---------- ---------- ---------- --- ----------

  4 1 248 YES ACTIVE <-this is the only group that is still ACTIVE

  5 1 0 NOT ASSIGNED NO.

  6 0 YES 0 UNASSIGNED

  7 0 YES 0 UNASSIGNED

  SQL > SELECT SEQUENCE #, APPLIED, FIRST_TIME NEXT_TIME

  V $ ARCHIVED_LOG

  SEQUENCE ORDER #;

  SEQUENCE # FIRST_TIM NEXT_TIME APPLIED

  ---------- --------- --------- ---------

  232 06-06-SEPT.-15-15-SEP YES

  233 06-06-SEPT.-15-15-SEP YES

  234 06-06-SEPT.-15-15-SEP YES

  235 06-06-SEPT.-15-15-SEP YES

  236 06-06-SEPT.-15-15-SEP YES

  237 06-06-SEPT.-15-15-SEP YES

  238 06-06-SEPT.-15-15-SEP YES

  239 07-06-SEPT.-15-15-SEP YES

  240 YES 15-SEP-07 07-SEVEN.-15

  241 YES 15-SEP-07 07-SEVEN.-15

  242 YES 15-SEP-07 07-SEVEN.-15

  YES 243 15-SEP-07 07-SEVEN.-15

  244 YES 15-SEP-07 07-SEVEN.-15

  245 YES 15-SEP-07 07-SEVEN.-15

  246 YES 15-SEP-08 15-SEP-07

  247 15 - SEP - 08 IN-MEMORY 15-SEP-08

  16 selected lines.

  On the primary:

  SQL > SELECT SEQUENCE #, APPLIED, FIRST_TIME NEXT_TIME

  V $ ARCHIVED_LOG

  WHERE NAME = 'ORADB_S8 '.

  SEQUENCE ORDER #;

  SEQUENCE # FIRST_TIM NEXT_TIME APPLIED

  ---------- --------- --------- ---------

  232 06-06-SEPT.-15-15-SEP YES

  233 06-06-SEPT.-15-15-SEP YES

  234 06-06-SEPT.-15-15-SEP YES

  235 06-06-SEPT.-15-15-SEP YES

  236 06-06-SEPT.-15-15-SEP YES

  237 06-06-SEPT.-15-15-SEP YES

  238 06-06-SEPT.-15-15-SEP YES

  239 07-06-SEPT.-15-15-SEP YES

  240 YES 15-SEP-07 07-SEVEN.-15

  241 YES 15-SEP-07 07-SEVEN.-15

  YES 07-SEP-15 242 07-SEP-15

  YES 243 15-SEP-07 07-SEVEN.-15

  244 YES 15-SEP-07 07-SEVEN.-15

  245 YES 15-SEP-07 07-SEVEN.-15

  246 YES 15-SEP-08 15-SEP-07

  247 NO. 15-SEP-08 08 - SEPT.-15

  If you have a large DML activity on primary, you see more than one group # in v$ active standby_log.

  RFS will always try to assign the next available standby log, because your group changes # 4 are already applied, it allocates this group again after the switch.

  Check metalink doc: bug 2722195 and 219344.1

• FMW: Portal Upgrade Advisor - difficult location for PFRD readme install

  A link to the Readme for installation of the PFRD would be nice to show the step 2 'Article page to 'Build base Middleware of Oracle 11g Architecture' MOS'. I had to hunt for this using previous URL for WLS.

  http://download.Oracle.com/docs/CD/E17904_01/install.htm

  Here, he has a link to "Oracle Portal Installation Guide, forms, reports, and discoverer"
  That points to http://download.oracle.com/docs/cd/E17904_01/install.1111/e10421/toc.htm
  "Oracle® Fusion Middleware Installation Guide for Oracle Portal, forms, reports, and discoverer
  11g Release 1 (11.1.1)
  Part number E10421-04.

  In addition, zip to the 11.1.1.4 files upgrade has not checked in their own target directory.  To make things easier.    Example:

  (asdbfh) on fchocsi.wh.ldsglobal.net/opt/web/install/PortalUpgradeAdvisor: > mkdir pfrd
  (asdbfh) on fchocsi.wh.ldsglobal.net/opt/web/install/PortalUpgradeAdvisor: > cp V18645 * pfrd

  There was no readme with these files.
  Pfrd CD
  Unzip V18645 - 01_1of4.zip
  RE: Creates the subdirectory Disk1.

  Unzip V18645 - 01_2of4.zip
  RE: Created Disk2 subdir.

  Unzip V18645 - 01_3of4.zip
  RE: Created DIS3 subdir.

  Unzip V18645 - 01_4of4.zip
  RE: Created Disk4 subdir.

  I have now connected this enhancement request
  Bug 11704315 - ENH REQ: MW 11.1.1 YES MEDIA AND the Group of HOTFIXES MUST UNZIP TO DISK1, DISK2 ETC.

  to go on the side of the doc bug, I logged a few days back

  Bug 11693389 - DOC BUG - WLS 10.3.X SETUP GUIDE: ADVISE THAT DECOMPRESS DOES NOT CREATE a subdirectory

• PagePhaseListener - after the last phase to run code

  Hello
  
  I've set up my own PagePhaseListener that works very well.
  

  public class MyAdfListener implements PagePhaseListener {
      public MyAdfListener() {
      }
  
      public void afterPhase(PagePhaseEvent pagePhaseEvent) {
          System.out.println("############### after PhaseEvent: " + pagePhaseEvent.getPhaseId());
          // call this code before INVOKE_APPLICATION
          if (LAST-PAGE-PHASE) {
             EXECUTE CODE
          }
      }

  This displays a list of numbers. The latest is not always the same which makes it difficult for me to run code after the last phase.
  # After PhaseEvent: 9
  # After PhaseEvent: 0
  # After PhaseEvent: 1
  # After PhaseEvent: 10
  # After PhaseEvent: 11
  # After PhaseEvent: 12
  # After PhaseEvent: 5
  # After PhaseEvent: 13
  # After PhaseEvent: 7
  # After PhaseEvent: 9
  # After PhaseEvent: 0
  # After PhaseEvent: 1
  # After PhaseEvent: 8
  # After PhaseEvent: 14
  
  
  
  How is it possible to run code after the last phase? I used

  if (pagePhaseEvent.getPhaseId() == 7) {
  }

  to catch a fairly late stage and he works for now, but I don't have a good feeling about the stability of this code, because the last number is not always the same.
  
  Greetings
  Tobias

  Yes, certainly makes it look like a doc bug (or a bug that values > 8 are returned) - you can probably find an answer to this, with the support of the Oracle, or if you have the source code for the ADF, by reading the source :)

• The Forum email settings programmatically

  I'm looking to set up the Instance of e-mail of our apex Production environment settings and hope it can be done programmatically to reduce the complexity of staging.
  
  Is there an API, the procedure or package I can call who will set the required values (server name and Port) without having to unlock the generator, connect to the INTERAL workspace and make the changes via the user interface?
  
  Thanks for any help.
  
  Duncs

  Hi Duncs,

  You can take a look at the APEX Administration Guide on the management of environments runtime, especially the section "Configuration of the Email in a Runtime environment.
  http://download.Oracle.com/docs/CD/E17556_01/doc/admin.40/e15521/adm_mg_service_set.htm#BEJBCEEH

  The link above is for APEX 4.0. If you use an earlier version of the APEX, use the corresponding document.

  -Udo

  PS: I just found a bit of doc - bug. The documentation makes reference to

  BEGIN
     APEX_INSTANCE_ADMIN.GET_PARAMETER(PARAMETER_NAME, PARAMETER_VALUE);
  END;
  

  where the call should be

  BEGIN
     APEX_INSTANCE_ADMIN.SET_PARAMETER(PARAMETER_NAME, PARAMETER_VALUE);
  END;
  

  SMTP_FROM, SMTP_HOST_ADDRESS, and SMTP_HOST_PORT parameters seem to be OK.

  Published by: Udo the 13.10.2010 13:27

• Big Bug mith my doc of Muse

  Hello

  I have a big problem with Muse. Yesterday, I was working on my web site and I decided to adapt it to a version of the phone.  So I make a copy of a large rectangle (not a link, an image but simply a rectangle with muse) from the House of the desktop version and I stick to the House a mobile version. From this point on, all bugs and my document is unusable. I'm very afraid because this is my only document on this website and I spend a lot of time on it.

  The message that appears when I try to open my doc is the following:

  This document contains 4 active links being oversampled. You should resize smaller or right mouse click on the assets in the active panel to display more options.

  When I try to open the phone version, to clear the large rectangle, to the origin of the bug, the message that appears is the following:

  Adobe Muse CC has encountered an error and will now close. Please report the last shares little you take leading up to this error to the CC adobe muse team.

  Failed to instantiate. U8291 UID in list owned by layer (UID: U7328)

  Sorry for my bad English, I'm french ;-) I need your help please.

  ELSA Kbaier

  Hi Elsa

  Could you please share your with us .muse file to study? Please send it to [email protected]. If your file is larger than 20 MB, you can use something like Adobe SendNow SendThisFile or Dropbox. Don't forget to mention the link to this forum thread in your email so that we can identify the file.

• Bug: See Doc blocks before before closing the card

  Well, I don't know what is happening, but every time I open a document order to the doc and then attempt to close the card throw, my pre resets.  It freezes for about 5-10 seconds with the map half off the screen, then I get a Palm logo and a reset.  Reset does not very long - an Orange-Sym-R reset lower.

  This has happened to me for .doc, .docx, .pptx and same .pdf files.

  Any ideas?  Do I need to WebOS Doctor?

  Never mind.  I solved it.  A reset Orange-Sym-R fixed the problem.  All is well now.  Phew!

• 11.1.2.3.500 LCM undocumented bug / uncompressed export

  I don't know if it's documented. Normally in 11.1.2.3 when you perform a full export of a planning application it's zipper upward. In 11.1.2.3.500 this is not the case when Essbase data is included. It will drop a folder in the what with all of the relevant artifacts.

  When planning application LCM export 11.1.2.3.500 uncheck Essbase data. Then run (FINPLAN or some application name your use) will now be zipped to the top as he would in the 11.1.2.3 before correctifs.500 is applied.

  Please take a look and let me know if others get this behavior. I think that it is a bug that is not documented. Unless I missed something in the documentation. Who at that time, I gladly would he use for SEO.

  Thank you
  DjSmeadly

  I think that's the way it should work, what follows is of the HSS.050 patch readme when data has been introduced at LCM, it aims to Essbase but it follows the same logic.

  "In 11.1.2.3.050 during export Essbase application: If artifact of data is selected, the exported content will be exploded as a file format." If data artifact is not selected, then the exported content will be be zipped up to the threshold of<=1.8GB. anything="" above="" this="" will="" be="" automatically="" stored="" as="" exploded="" folder="" content. ="">

  See you soon

  John

  http

• Why don't make you be able to print on a higher monitoring internet PDF Docs? I have to switch to Chrome, whenever I need to print PDF invoices.

  I get all my invoicing via the internet (PDF documents), thus eliminating virtually any snail mail.

  My inability to print these PDF docs internet demanded my chrome download just to get my bills every day.

  I'm willing to be patient for a short time, but if a 'solution' is not available quickly, I will be switching to chrome on a permanent basis.

  There is a bug in the version of Firefox.

  • Bug 999284 - Firefox 29,0 printing blank page instead of PDF
  • Bug 1003707 - pdf.js print prints a blank page

  Now, you can use another program like Adobe Reader PDF Viewer, see:

  • https://support.Mozilla.org/KB/disable-built-PDF-Viewer-and-use-another-Viewer

• BoxPlot bug?

  Hi guys,.

  When I was looking for an example on how to draw a boxplot in LabVIEW, I found these two examples:

  https://decibel.NI.com/content/docs/doc-4929
  http://www.NI.com/white-paper/3047/en

  At first glance the example in the boxplot.llb library boxplot.vi seemed OK, but apparently there's something wrong with the superior moustache.
  It extends to about 120, but it takes 100 (this is the largest number of the population).
  See the attached screenshot. Other items (median, quartiles, lower whiskers) are OK.
  The screenshot (from Gnumeric) shows the correct boxplot for the population: 18,27,34,52,54,59,61,68,78,82,85,87,91,93,100
  You can also check this online: http://www.alcula.com/calculators/statistics/box-plot/ or use a spreadsheet/statistics as Excel, Gnumeric, or SPSS program.

  Before I dive into the code, can someone please check this bug exists or I do something wrong? Thanks in advance.

  Paul

  In the explanation of the boxes in the original white paper (which is one that uses Hillman, just put the bars at the end of the moustache for clarity), there is the statement in the first paragraph under the first digit boxplot, 'whiskers are 1.5 times the internal quartile divided lengthwise, which you measure the distance between the median '. As you say, this isn't 'normal' how canisters work (at least not in my experience). If you go in the subVIs, however, you can easily change your whiskers to give the maximum and the minimum of your berries like ends of whiskers, rather than the calculated values of 'Calculate Whiskers.VI'.

  Cameron

• bug in ToolTips

  I'm really sorry, but I have another problem with ToolTips...

  I'll show two samples, codes more result, in the first case, all right, in the second, the balloon trying to be clever and fails miserably: he inserts line breaks without asking and he cuts/fails/swallows text, see below. I checked the tank string using the view variable, the text has been formatted correctly and is finished. Unfortunately, it is not completely.

  Indeed, the only difference between the two cases is that (1) there is a long line, path name, which prevents the word "automatic" scarf, undocumented / line break. I have no explanation why part of the text is omitted, may be that there is a default aspect ratio or a maximum of lines? Too bad...

  (1) OK

  [768] Char tooltip_text;

  sprintf (tooltip_text,
  "%s %s %s",.
  "Leader: \n\n reference spectrum."
  reference_spectrum_file_list [reference_spectrum_file_index],
  "\n\nDouble Click\t\t\t to open a spectrum file\n".
  "Ctrl + Double Click\t\t to open one or several frequencies files\n".
  "Shift + Double Click\t\t to import a data file\n".
  "Ctrl + Shift + Double Click\t to import one or several data files\n".
  "Alt + Double Click\t\t to open a directory of spectrum files\n".
  "Shift + Alt + Double Click\t\t to import a directory of data files\n".
  "Right Click\t\t\t to display a context menu");

  SetCtrlAttribute (panel_handle, control_id, ATTR_TOOLTIP_TEXT, tooltip_text);

  

  (2) THE FAILURE

  [768] Char tooltip_text;

  sprintf (tooltip_text,
  "%s",
  "Leader: \n\n reference spectrum.
  "Double Click\t\t\t to open a spectrum file\n".
  "Ctrl + Double Click\t\t to open one or several frequencies files\n".
  "Shift + Double Click\t\t to import a data file\n".
  "Ctrl + Shift + Double Click\t to import one or several data files\n".
  "Alt + Double Click\t\t to open a directory of spectrum files\n".
  "Shift + Alt + Double Click\t\t to import a directory of data files\n".
  "Right Click\t\t\t to display a context menu");

  SetCtrlAttribute (panel_handle, control_id, ATTR_TOOLTIP_TEXT, tooltip_text);

  

  Hi Wolfgang,.

  I was easily able to reproduce the bug (#421593). The problem seems to be related to the tabs. If you replace them with spaces the problem disappears. Of course, this may not be the easiest thing to do, when you use a non-monospaced font in the world. But until there is a difficulty, perhaps this is your only option.

  Sorry for the inconvenience.

  Luis