4.6 HP Device Manager: HPDM 4.6 Get models list error

Similar Questions

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• 4.7 HP Device Manager: HPDM finding Thin Clients

  I'm trying to implement HP Device Manager 4.7 on a newly configured Windows 2012 R2 server.

  I am replacing a Server 2008 R2, where HP Device Manager works perfectly on our network.  In fact, if I uninstall HPDM on the new server and reinstall it on Server 2008 R2 I can always access all thin clients.

  The only difference I see in the facilities which is for some reason any gateway in HPDM is not a subnet mask.  Research of the device are not lacking, they don't sell anything or simply continue indefinitely until I have Cancel.

  Any help would be great.  Thanks in advance.

  Just to confirm: you did turn with HPDM 4.7 on Server 2008 R2 successfully, but not the right to 2012 R2 server?

  Is your Windows 2012 R2 server with more than 1 NIC card? Could you please assign a specific NIC loca in the Gateway Configuration window and see if that fixes the problem?

  Otherwise the logging level value please DEBUG and post the gateway.log when start HPDM Gateway

• HP Device Manager 4.6 Installation failed: local write error - access denied

  Need help to install the management software Application computer Device Manager 4.6 HP Thinclient

  While doing the custom Setup, I got an error for the language setting. The Error Message says "local write error - access denied.

  How to solve the problem... Please help as soon as possible

  More details if you need:

  I use Windows 2008 R2 Server Operating System - 64 bit [VM]

  I use IIS 6.0 to create FTP Site

  Troubleshooting:

  I tried to install on another Virtual Machine with same Windows 2008 R2 Server Operating System - 64 Bit

  I tried to install the software several times but still facing the same problem

  Any help in this matter would be appreciated

  Kind regards

  K N R K

  Hello

  Please find the fix for the problems

  1 Please download and install HPDM 4.5 and 4.5 SP5

  2 extract HPDM 4.6

  3. start install HPDM 4.6

  a. Select custom

  b. ensure that all HPDM components are checked. Click Next.

  c. accept the default root for the master repository path, or click Browse and navigate to a specific location. Click Next.

  d. click on install. HPDM is now installed.

  e. after the HPDM update is installed, a Configuration of HPDM Wizard appears. Select your language and then click Next

  f. click Search to check the ports and then click Next.

  g. make sure that DHCP server that is not located on this computer is selected and then click Next

  hours of service under start PXE when the gateway, select No and then click Next.

  i. click on run

  j. click Finish.

  ====================================================

  Although I am an employee of HP, I speak for myself and not for HP. ===

  * Click on the star of CONGRATULATIONS on the left say "thank you."

• I use a Belkin USB wireless adapter. In Device Manager, I see this same adapter listed several times... with a yellow exclamation mark over it. However, an entry for this card will not have any problems indicated and work well.

  I think that whenever this USB adapter is removed and reinstalled, the system is seen as a new USB device.  However, if I try to uninstall the list in Device Manager showing a yellow exclamation point, the system will not... I get a message saying "Uninstall failed...". This device may be required for the system startup.
  Suggestion?

  Hello Fgibson1911,

  Thank you for your message.  All of these entries stay after you restart your computer?  In addition, what happens when you search for new hardware?  Try this and let us know the result.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on Device Manager.
  Right click on "Network adapters", and select "search the hardware changes.
  The "Yellow!" entries disappear?
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP 630: error device Device manager see the two

  Sir Help My Device Manager Find Me this driver display yellow error on two devices. I had to download driver hp site but not installed driver. "Open popup" does not meet Minimum system requirements.

  Hello

  Please try:

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55085.exe

  and

  FTP://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58429.exe

  Otherwise please use following instructions to get hardware id missing then return:

  http://www.WikiHow.com/find-hardware-ID

  Kind regards.

• In Device Manager, OTHER DEVICES has yellow question mark

  I always have problems with sudden black screens with auto restart.  It has been suggested that I get a new video driver, so I went into Device Manager, and since there is no list for video devices, I looked in the other devices section (which has PCI Simple Communications Controller, SM Bus controller, video controller, and video controller - compatible VGA) there is a yellow question mark next to each one.  I opened each of them and read, "Unknown manufacturer", and "the drivers for this device are not installed (Code 28) ' how to find who is the manufacturer and model and the version?

  It might be true that it doesn't work with Windows 7, I never said it would work with Windows 7 (it's the XP forum, don't forget!) but there may be something similar.  Since WIndows 7 is so wunnerfool, they just left that have a completely since there must be no need for this.

  99% of the things on which I work is some flavor of Windows Server, XP or Citrix and haven't seen nobody wants to even consider moving their campus everything to Windows 7 and I do not see happening any time soon!  It is not in their plans at all.

  I support a handful of populous (just a few) who have systems that require Windows 7 for some features and other things though, but they are just itty bitty compared to the basic XP installed.

• Device Manager - no information screen

  When I put it up the Device Manager I don't get any information about the devices in my HP laptop.

  The computer is running Windows XP Home.
  I tried many patches offered on the internet.
  It seems that I need to install Windows, but HP did not provide me the disc.  I have the ID of the software on the back of the computer
  the standard Windows sticker.
  Does anyone have a suggestion?
  Thank you
  Hank Wolfla

  Hello

  have you tried this:

  http://support.Microsoft.com/kb/311504/en

  LC

• My usb port does not work. Device Manager says he has a "code 10".

  My dad recently bought a laptop on ebay. It's a HP Omnibook 900 with a 4 GB HD. The previous owner had improved from the original from Windows 98 to XP with SP3.

  It has a USB port in the back & it does not work!

  In fact it is not even appear in the Device Manager! I need to select 'Show hidden devices' to see same the USB hub root. The USB port has a yellow warning icon. In properties, it indicates the port is enabled but does not work because of a "Code 10".

  What the devil is a "code 10" & how in the heck to solve this problem, so that the USB works?

  The port is powered. When I connect devices usb load they turn on & load, but, of course, are not displayed on the computer. My best theory is that the port can be usb 1.0 but the software is intended for usb 2.0 and what could be the cause of the problem. That's just guessing on my part because I do not know with certainty if the usb is 1.0 or 2.0.

  It is especialy boring being the only external devices can I plug a CD player (unwritten) & a floppy drive. It would make my life much more pleasant if I could run software, backup & file transfer, etc. with a usb drive instead! It could even than the laptop quite useful to be worth the bucks thirties, my father paid for it!

  Help, please. Thank you.

  Hi SnarFoo,

  Method1

  The Code 10 error code is generated when Device Manager it has not enough information or error that has spread upward through the device drivers is not recognised by the Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  See the article and check if that helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Method 2

  If the previous step fails, then remove and reinstall all USB controllers on the computer and check if that helps.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

• HP printer device manager! Symbol, "failed to connect" Windows Sound - still Printer Works

  Every time you start, I hear the sound of the device "Windows failed to connect.  How can I get rid of this?

  I have a printer HP of J6480 with WIn 7.  Device Manager does not recognize the printer driver.

  In Device Manager, the printer appears with the! error symbol.  No other devices have an error symbol.  The HP Solution Center and the printer work again.

  (1) I tried install fresh of the current HP software full functionality.

  (2) I tried the HP uninstaller program, through all five uninstall programs twice.

  (3) I ran CCleaner to clear the registry problems.

  (4) I tried to delete the Device Manager "Officejet! Entry J6400 series.  The Solution and the printer Center then do not work.  Apparently, the Device Manager recognizes the printer but not the driver.  I have to go to 'Programs', 'HP', then 'Officejet J6400 Series' to reinstall the software.

  (5) I tried to get the Device Manager to recognize the software.  When I click on «!» OfficeJet 6400 series', I get the message "the drivers for this device are not installed (code 28).  If I then click on 'Update Driver' and select' Browse my computer for driver software"then click on"Browse "C:\Users\Myname\Downloads", where I have the Sofware HP 13.0 full feature software and basic print and Scan Driver files, he says "Windows cannot find driver software".   If I click on "Search automatically by the driver software", I get the same message.

  I would appreciate ideas!  Thank you!

  Friendlycomputr,

  OK, if a few things stood here:

  1 windows its "cannot connect device" sounds only with a direct connection, not a network connection which is what you have. (Ethernet)

  2. have you had any other device installed on this computer is more active?

  I would like you disconnect the Ethernet connection and go below:

  1. uninstalling the printer software

  2. make a restart on the computer, when it starts, do you hear the sound "device cannot connect?

  Let me know.

• Receive error messages when trying to install McAfee and it said their support that the question is related to the error in Device Manager.

  How can you diagnose errors in Device Manager

  Tried installing McAffee, but error message. Contacted McAfee... says the problem is in the Device Manager. How can I determine the error in Device Manager?

  Are you sure you don't have another Antivirus always installed; even an expired subscription?

  A lot of AVs will not install if they find one already installed (and you must have an AV installed in any case).

  Another problem may be how you try to install it:

  You need to download and save on the desktop > then right click on the saved files > select run as administrator.

  FYI: Here's how to look in the Device Manager:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  See you soon.

• Lack of iPhone 4 mobile device in Device Manager

  Tried to get windows to recognize my iPhone 4. iTunes picks it up, synchronizes and updates my phone, but windows will not pick up for me to take off my photos. I searched online for the last three days of searching for information to make this work, and all the repointer sites to update the driver for portable devices in Device Manager. However I don't see it in Device Manager. The product from the list as follows:

  + Network adapters
  + Processors
  + SD host adapters
  Help to understand this would be most appreciated. Thank you for your time.

  Hello

  Are other USB devices on your computer get recognized?

  I suggest you try the steps mentioned in the article below.

  iPhone, iPad, or iPod is not recognized by Windows due to driver installation problems

  http://support.Apple.com/kb/ts1538

  Hope this information is helpful and let me know if you need help

• It lacks Intel high definition HDMI audio device Manager.

  I have disabled the Intel high definition HDMI audio device manager.  He retired from the list of items leaving only speakers.  I have the 'show disabled and disconnected devices' checked, but Intel HDMI high definition does not appear.   It is said that it works correctly and enabled in the Device Manager.  I have tried everything I can think of to solve the problem, including a system restore that did not work, any other ideas?   Thank you.

  Hi skw1,

  I suggest that you uninstall the HDMI device from Device Manager, later visit download sound card manufacturer's website and install the latest driver for the HDMI device and check if it works.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Teredo Tunneling Pseudo interface displays the code 10 in Device Manager

  I have a code 10 on it. I went into the Device Manager and it says that my drivers are up to date for this device. I still have the yellow sign on it?

  Hello William,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  This problem can occur when the device driver is missing or damaged.

  Code 10 is displayed for the following reasons.

  -Device Manager cannot start the device.
  -One of the pilots who needs the unit does not start.
  -Device Manager has insufficient information to recognize the error shows this device driver.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Hardware devices do not work or are not detected in Windows
  http://Support2.Microsoft.com/mats/hardware_device_problems

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
  https://Support2.Microsoft.com/kb/943104

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• wireless network card does not appear in Device Manager

  HP DV6338se laptop Windows Vista. The wireless light is orange when the switch is on. I replaced the wireless card and without change. If I go into device manager the wireless adapter is not listed. I reinstalled the card several times, no change.

  USB is. Thanks for your help!