4 Aironet 1250 and a controller?

Similar Questions

• No repeaters between Cisco Aironet 1250 and equipment cisco config

  Hi all

  Company moves to a new site and I need to improve wireless coverage.

  We currently only AP 1252 providing wireless throughout the office. As we produce and sell our own wireless equipment, I was wondering if it is possible to use company equipment to improve coverage.

  I was considering deploying the 1252 in a location central and 2 repeaters in the four corners.

  Any suggestion is welcome.

  See you soon,.

  Fabio

  Repeater mode is owner for each company... Cisco devices can associate with other Cisco Repeater not Cisco No...

  You can use any device cisco to expand coverage... the best feature is a pair of 1310 bridge or bridge of 1410 in long distance... or, you can go for 1252 with an another 1252 if the distance is less.

  Let me know if that answers your question...

  Concerning

  Surendra

  ===

  Please do not forget to note positions that answered your question or was useful

• Basic questions of configuration Cisco Aironet 1250

  Hello

  I'll be three Aironet 1250 within a building.  It won't be a wireless controller, the AP will be autonomous.  I'll put them all the same thing, with WPA2 wireless encryption.  My question is, what is important and beneficial to add the configuration to the s AP so that they are aware of the other (for roaming maybe)?  If Yes, what is this technology called and someone could direct me to a section of a guide that could illustrate this?

  Or I'm fine with just stand-alone configuration 3 AP as it is.

  All other pointers are welcome.

  Thank you!

  Hello

  If you use the pre-shared as an authentication method, so there is nothing special to do. As long as they have the same SSID, are in the same subnet and are connected to the same network, roaming will be fine.

  No specific configuration is required.

  Nicolas

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Tecra M2 yellow exclamation - system basis, ethernet, and USB controller

  Hi all.

  SORRY FOR THE LONG TEXT TRYING TO ACE GIVE MUCH INFORMATION AS POSSIBLE.
  I have a Tecra m2 Details: -.
  PTM20E-4MP1D-FR
  NO. 74631791 G SERIES
  OTHER NUMBERS:-PM715/256 / 40 G 42/14XT/D/LM/W.
  SINGLE UNIT CHANGE IS THE HARD DISK OF 40 GB ON EBAY WITH WINDOWS 2000 SERVICE PACK 3 INSTALLED.

  I have checked these forums and I would like to give a big thanks to Jack Black, who advised a link to download Intel Wlan page, this solved my problem-driver Wlan driver was NOT available in the toshiba download page. I REQUIRED the PRO2000 INTEL "DRIVER XP 32 / 2000. Thank you once again, Jack.

  I have a problem with the Base system, Usb controller and Ethernet controller, although the USB devices on the right side of the unit work. These items are listed in the other devices category in Device Manager with the black-yellow exclamation next to them.

  I worked my way through all the LAN DRIVERS from the toshiba download page, can't installed ethernet.
  Similarly, the base system - I tried sd card download (suggested to this support page) and other downloads.
  Nobody knows for certain what the base system is?
  ANYONE KNOW WHAT DRIVERS I NEED OR WHERE TO GET THEM?

  haven't looked at the usb part again as I try to run internet facilities and you need fixed ethernet controller.
  I looked at the guide suggested to install the drivers, but only after I had tried to disentangle the display and utilities toshiba sound etc.
  An OTHER devices I have work at the INFRA RED using the driver - smc - fast irc or similar fom toshiba page.

  A BIG thank you to those who have read this maybe very far, the foregoing will help someone else.

  Win XP is known as the Microsoft operating system better personally I prefer Win XP. But finally it s your own decision that you want to use.

• PCI devices and network controller

  Can Hi anyone say about hoe to install PCI device driver and network controller Please that these two devices is marked with a? in the windows device drivers
  Thank you

  Hello

  If you have a problem, it will be very useful if you can write us which model of laptop you have.

  Please check the download from Toshiba site. You will find all the drivers that must be installed. If the unit is not old, you will find an installation manual and order of the facilities. If you are not able to identify hardware, please write again.

  Good bye

• Compaq Mini CQ10-525DX: lack of controller ethernet drivers, network controller, pci device and video controller for windows 7

  I need the driver for ethernet controller and network controller driver, driver pci device video controller for Windows 7 Home Premium 64 bit driver

  Someone please help

  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04
  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01
  PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C
  PCI\VEN_14E4 & DEV_4727 & CC_028000
  PCI\VEN_14E4 & DEV_4727 & CC_0280

  PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C & REV_01
  PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C
  PCI\VEN_10EC & DEV_5288 & CC_FF0000
  PCI\VEN_10EC & DEV_5288 & CC_FF00

  PCI\VEN_8086 & DEV_A012 & SUBSYS_148A103C & REV_00
  PCI\VEN_8086 & DEV_A012 & SUBSYS_148A103C
  PCI\VEN_8086 & DEV_A012 & CC_038000
  PCI\VEN_8086 & DEV_A012 & CC_0380

  Hello:

  See if these drivers work...

  PCI\VEN_10EC & DEV_8136:

  This package contains the driver for the Realtek NIC installation files in the notebook models and operating systems.

  File name: sp49600.exe

  PCI\VEN_14E4 & DEV_4727:

  FTP://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57965.exe

  PCI\VEN_10EC & DEV_5288:

  This package contains the installation files for driver for the Realtek card reader for laptops models and operating systems.

  File name: sp49599.exe

  PCI\VEN_8086 & DEV_A012:

  https://Downloadcenter.Intel.com/download/19493/Intel-Graphics-Media-Accelerator-3150-driver-for-Windows-7-64-bit

• Installed windows 7, but the yellow mark! on Ethernet, network and video controller

  Dear,

  I installed the new windows 7 on my HP laptop, Mini. But there is yellow! panels against the Ethernet controller, network controller, and video controller under Device Manager. I can't access the internet.

  For these three hardware ID is:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_3594103C & REV_05\4 & 7A 53824 & 0 & 00E0
  PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C & REV_00\4 & 7F2283C & 0 & 00E1
  PCI\VEN_8086 & DEV_A012 & SUBSYS_3594103C & REV_00\3 & 33FD14CA & 0 & 11

  Please help solve the problem.

  Thank you.

  You are the very welcome.

  Here are links to the drivers you need in the order you posted the material ID's

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-95247-1&cc=us&DLC=en&LC=en&OS=4062&product=5173007&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111718-1&cc=us&DLC=en&LC=en&OS=4062&product=5173007&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-95476-1&cc=us&DLC=en&LC=en&OS=4062&product=5173007&sw_lang=

• HP Pavilion g7-1329wm Notebook: SM Bus controller and network controller

  where can I find Sm bus controller and network controller driver for my computer?

  Hello:

  Here are links to the drivers you need...

  SMBus:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_119081_1

  Network controller:

  This package contains the installation package driver for the controller LAN Realtek RTL8188CE wireless in the laptop models running a supported operating system.

  File name: sp55342.exe

• Old server will allow new domain and domain controller.

  We had old netwrok running a sbs2008 and 3 Server 2003 with domain name xyz.local(not actual), now we have a new server sbs 2008 with new domain name xyzit.loca and put some old sbs2008 at rest (off-grid). How can I join servers olde new domain and domain controller from NW

  Hello

  The business support, you can find forums on TechNet, see the following links:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• HP Probook 4730 s system device base and network controller driver

  Dear employees of Hp,

  I have install on my HP Probook 4730 s new Windows 7 Ultimate and I cannot find and install the base system device and network controller driver.

  Can you help me please?

  Kind regards

  Robert

  Hi, Robert:

  Here is the link to the wireless card driver you need...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Best regards

  Paul

• Windows XP 2002 multimedia Audio Controller and Ethernet controller

  I uninstall some programs and I accidentally uninstalled the multimedia audio controller and ethernet controller. I don't know what to do now, I have no sound on the computer.

  I uninstall some programs and I accidentally uninstalled the multimedia audio controller and ethernet controller. I don't know what to do now, I have no sound on the computer.

  Don't panic.  As long as you know the manufacturer of the computer as a whole and the model (ex: Dell, Inspiron _ HP Pavilion, etc.)-probably, you can visit the web site of the manufacturer (Dell, HP, Lenovo, gateway, etc.) and find their support and/or downloads and drivers section and find the downloads, they are available for your system model and download / install the drivers for the devices.

  -You can download and install that drivers live OEM - as long as you know who did say components.

• Bluetooth controller, network controller and ethernet controller drivers

  Bluetooth controller, network controller and ethernet controller drivers are missing on my model HP 15 R007Tx I installed windows 7 64-bit.

  Hi Charlie117,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you are looking for for your bluetooth, network, and Ethernet controllers. I'll be happy to help you with this. In your device manager there that no matter what it is listed under your network cards? What under Bluetooth? If so can I please get the name and the hardware ID of the device.

  Thank you

• PCI data acquisition and Signal controller and SM Bus controller drivers are not installed

  My laptop is Toshiba satellite L305 with Intel Pentium (R) Dual CPU T3200 2 GHz / 2 GHz.

  Rescently that he has been upgraded to Windows Vista Ultimate Edition, 32-bit operating system. Since then, my USB device wireless to connect to the internet is not worked. The Device Manager displays a yellow! Select this option for PCI Data Acquisition and Signal controller and the Bus controller. The details for the two area said that pilots are not kept.

  How can I get these drivers. I'll appreciate your help, thank you.

  Carlos

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Toshiba support at the above link

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Driver download at the link above

  http://laptopforums.Toshiba.com/

  Toshiba laptop Forums at the link above

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Access the site of the manufacturer of your laptop to the link above > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Controller USB and Ethernet Controller Code 28

  I recently reset my pc and reinstalled windows. However, I have a problem with the USB and Ethernet Controller. They say they have a Code 28, which is a driver not installed. I don't know what to do. I have a Gigabyte motherboard and no internet connection on the PC. SO I can't check online for drivers or solve correctly. (He tells me just to check when I'm online.) I tried everything, from downloading USB controllers to use the disk to install the drivers. When I use the disk it gets stuck loading around 3%. Help would be very appreciated.
  Stephen K.

  Then, you will have to rely on updates for that drivers through Windows updates. If there is nothing, it means that the device that you use should not be used on the version of Windows that you are running.

• Aironet 1200 and MAC authentication

  Hi all

  I Aironet 1210 and you want to implement the authentication MAC without ACS.

  Now, I know that any AP Aironet can allow authentication MAC se store the list of MAC addresses.

  So after the command:

  TestAP (config-if-ssid) #authentication open mac

  TestAP (config-if-ssid) #authentication open mac address?

  WORD mac address list (1-31 characters) name

  There is no way I can list all MAC addresses in the list. I use IOS Version 12.2 (13) JA3.

  Any help would be greatly appreciated.

  Kind regards

  Samuel Wilson

  If you do not have a RADIUS server on your network, you can create a list of MAC addresses allowed on advanced security of access point: MAC address authentication page. Devices with not on the list of MAC addresses are not allowed to authenticate.

  I use the GUI to make a list:

  http://www.Cisco.com/en/us/products/HW/wireless/ps4570/products_configuration_example09186a00801c0912.shtml

  The link above is to use the local capacity of GANYMEDE to the AP, but if you select the option "Advanced Security" on the right side of the web interface, it will take you to the page where you can create your list of mac addresses.

  Please evaluate the useful messages.