Tecra M2 yellow exclamation - system basis, ethernet, and USB controller

Hi all.

SORRY FOR THE LONG TEXT TRYING TO ACE GIVE MUCH INFORMATION AS POSSIBLE.
I have a Tecra m2 Details: -.
PTM20E-4MP1D-FR
NO. 74631791 G SERIES
OTHER NUMBERS:-PM715/256 / 40 G 42/14XT/D/LM/W.
SINGLE UNIT CHANGE IS THE HARD DISK OF 40 GB ON EBAY WITH WINDOWS 2000 SERVICE PACK 3 INSTALLED.

I have checked these forums and I would like to give a big thanks to Jack Black, who advised a link to download Intel Wlan page, this solved my problem-driver Wlan driver was NOT available in the toshiba download page. I REQUIRED the PRO2000 INTEL "DRIVER XP 32 / 2000. Thank you once again, Jack.

I have a problem with the Base system, Usb controller and Ethernet controller, although the USB devices on the right side of the unit work. These items are listed in the other devices category in Device Manager with the black-yellow exclamation next to them.

I worked my way through all the LAN DRIVERS from the toshiba download page, can't installed ethernet.
Similarly, the base system - I tried sd card download (suggested to this support page) and other downloads.
Nobody knows for certain what the base system is?
ANYONE KNOW WHAT DRIVERS I NEED OR WHERE TO GET THEM?

haven't looked at the usb part again as I try to run internet facilities and you need fixed ethernet controller.
I looked at the guide suggested to install the drivers, but only after I had tried to disentangle the display and utilities toshiba sound etc.
An OTHER devices I have work at the INFRA RED using the driver - smc - fast irc or similar fom toshiba page.

A BIG thank you to those who have read this maybe very far, the foregoing will help someone else.

Win XP is known as the Microsoft operating system better personally I prefer Win XP. But finally it s your own decision that you want to use.

Tags: Toshiba

Similar Questions

  • HP Pavilion g6 - 2264ca: HP Pavilion g6 - 2264ca Notebook PC Ethernet and USB controller missing

    NEED HELP!

    Recently, I went down my HP Pavilion HP Pavilion g6 - 2264ca Notebook PC of Windows 8 for Windows 7. Only Windows 8 drivers are listed on the support page, but they seemed all to install and works very well except for my CONTROLLER USB and ETHERNET. It is not that all drivers in the title of the support page and update of Windows cannot find them, neither can update of pilot programs. Here's what it looks like in Device Manager.

    Any suggestions where I might be able to get these drivers? Thank you!

    (1) USB Controller - PCI\VEN_1022 & DEV_7812 & SUBSYS_1849103C & REV_03

    While the first pilot, that I sent you must have worked, you can try one

    http://support.AMD.com/en-us/download/chipset?OS=Windows+8.1+-+64

    (2) Ethernet Controller - PCI\VEN_10EC & DEV_8136 & SUBSYS_1849103C & REV_05

    Download and install the 5th on the list. (Win7 and WinServer 2008 R2 Auto Installation Program (SID: 1497589))

    http://www.Realtek.com.tw/downloads/downloadsView. aspx? LangId = 1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTy...

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • My wireless printer has a yellow exclamation point in devices and printers. How to fix?

    My printer (HP Photosmart c4500) wireless has a feature wireless and when I use my desktop pc (Win7 Ultimate - x 64) to connect it shows a yellow exclamation mark for troubleshooting. When I run the troubleshooting it will prompt you to install the last pilot and fails to do so. So I tried to download the software from the manufacturer and install the drivers in this way but unfortunately I have another error:

    «Windows cannot install HP Photosmart C4500 print driver kernel mode series.»
    To obtain a driver that is compatible with the version of Windows that you are using, contact the manufacturer. »

    Although I have tested on a laptop nearby and had no problem.

    Hello

    Have you made changes on the computer before this problem?


    Method 1:
    Try the steps in the following Microsoft article and check if it helps.


    Method 2:
    Try these steps and see if it helps.

    a. click the start menu > run > type gpedit.msc
    b. under Local computer policy, double-click Computer Configuration.
    c. double-click Administrative Templates, and then double-click Printers.
    d. right-click on Disallow installation of printers using kernel-mode drivers and then click Properties.
    e. on the setting tab, click disabled, and then click OK.



    Method 3:

    I suggest to uninstall and download and reinstall the printer driver and software from the manufacturing site and check if it helps.

    Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

    http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3757817&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3575173

  • HP Envy M4 - does not recognize the Ethernet or USB controller

    I recently got a new HP Envy M4 and installed Windows 7 above.  I tried to install all the drivers on the support page HP, as well as any Intel acknowledged and stated that I needed, but the system is still not recognize Ethernet controller and the USB controller.  I have no idea where else to find appropriate drivers for these devices to make the system to identify and to work correctly.

    Why aren't these drivers on HP website?

    Hello

    Try a few steps

    go to your device manager > right clock on ethernet controller > go to properties > then details tag

    Select from the drop-down called Hardware ID is.

    and search for it on google or any search engine, you will get the right drivers...

    Here's print process filming!

    I hope this helps!

  • SP A10 and USB controller drivers

    I have a satellite pro A10 and cannot find the driver for the USB controller that is no longer available in toshiba online downloads. How can I get the driver that is not provided in the driver CD?

    Hello

    "normally you don't need a USB driver. The USB driver is part of XP and is installed by it! If it does not, you can uninstall the USB port in the Device Manager and the operating system reinstall the next time you start upward!

    Good bye

  • Satellite A30: HARD drive, modem and USB controller

    Hi, I have problems with my laptop A30. The HARD drive looks like it will fail (bad sectors) utility that I downloaded on the Hitachi site tells me that it is a hardware failure.

    I am also unable to use my modem that I also get a "cannot open port ' error even if everything looks fine in Device Manager and I have a problem with a USB controller that is apparently not entirely installed but I can not find the drivers for it!

    I am not a happy customer of Toshiba and it seems that there is a general failure with these the 30 GB Hitachi hard drives!

    Retro Hi,

    Maybe not much consolation, but my original 30 GB hard drive has been replaced after only 6 weeks of use. The replacement lasted 8 weeks and the third disc rotate a little better at 16 weeks. Readers were a mixture of Toshiba and Hitachi drives. After the failure of the third car, I decided to buy a bigger HDD (80 GB) and install it myself rather than lose the laptop for another two weeks so that it has been repaired. Then, I bought a new smaller HARD drive that I have installed in an external enclosure (USB) which I use now for regular backups of entire system weekly.

    The HARD drive inside my A30 notebook on the right side directly on the optical drive, and there was a noticeable temperature increase when I work with the optical drive. I have a theory for pets, this increase in heat may adversely affect the HARD drive at times.

    The last drive (a Toshiba MK8025GAS) is in place for 7 months but Norton Ghost has recently begun to report bad sectors so it looks like a new drive could soon be made to order.

  • Marked with yellow exclamation triangle COM port and does not work. How can I fix?

    My communication port says "Windows cannot determine the settings for this device.  See the documentation provided with this device and use the tab resource to set the configuration. (Code 34) "for all of my communication ports! Why is this?

    What material did you add?  Modem? Printer?

    Try this fixit

    http://support.Microsoft.com/kb/310123

  • ethernet and usb printer

    I have a beautiful deskjet 6940 on a network, but after the passage of XP, I need to take a computer on the internet.  They therefore have no Ethernet access to the printer. I thought thati f I had to install the printer on the XP computer via usb, then I don't have to buy a printer separated for a computer, I only use it as backup and rarely would have to print from.

    Question: can I install the USB driver on the XP computer and retain access to the printer, while he remains a shared for other computers network printer?  I thought if necessary, unplug the ethernet cable, computer XP link to printer with USB cable and print that way.  Or settings changed the printer and cause havoc?

    This mixed use, if possible, how to install safely on the XP computer?  Uninstall all the drivers first, and then reinstall it from old records or internet? Or uninstall the old drivers after installing new?

    Thanks for reading.

    Hi ellengoudsmit,

    You can use the printer while it is connected via USB to a computer and network with others. You should be able to install the software without having to uninstall anything. I recommend the software downloaded from the Web site to ensure you have the latest version.

    Printer HP Deskjet 6940 for XP 32 bit

    HP Deskjet 6940 printer XP 64-bit, it's only a pilot base, not complete software functionality.

    I hope this helps.

  • NB510-109 - driver missing for Ethernet and network controller

    Hi again

    I replaced the HARD drive on my NB510-109 and installed W7 32-bit teacher. Windows unfortunately has no Driver for my network controller and Ethernet. The seller of Ethernet is 1969 (Atheros), but the driver I found does not work.

    The seller of network controller is 10EC (Realtek or Acer) but I can't find a driver.

    Is there a link where I can load the original driver CD/DVD?

    PS: I could not save the original data of my old HDD for HARD drive has not finished.

    Are you looking for driver LAN or WLan driver?
    I m asking because the network controller could mean the WLan or LAn card.

    However, the laptop supports the Atheros LAN card and you must install the Atheros LAN driver.
    The WLan card is made but Realtek. Its 802.11bgn RTL8188CE card Wlan.

    On the page of the Toshiba UE driver you can find two drivers Atheros LAN to Win 7 32 bit:
    v 2.0.9.9
    v 2.0.11.12

    I recommend you to check them both.

    Realtek WLan driver can be downloaded from Toshiba WLan Portal:
    http://APS.toshiba-tro.de/WLAN/?page=downloads

  • Driver Ethernet and network controller missing after the Installation of 7 costs Windown

    Hello

    I have Sony Vaio VPCEG25EN E series laptop with Win 7 64 bit pre installed.

    I had installed Win 8 intended to test and when it is again installed win 7, I'm missing my network and Ethernet controller drivers. I don't see any network except for Bluetooth network card adapters.

    Tried to install the drivers from the SONY site but in error.

    Apart from these 2 drivers

    PCI device
    Simple PCI controller communications

    SM Bus controller

    are also missing.

    Please let me know the solution how to install the drivers and where to look for it.

    IMP Note: if I install the trial win 8 again, I'll have all my drivers after installation, but during the installation of Win 7, they disappear.

    What error do you get when you try to install the drivers of sony?  Windows generic drivers should work...  In Device Manager, do you have a selected and right click 'check for changes on the hardware?

  • Problem of (yellow exclamation point, no internet access) network controller

    HP Pavilion Slimline s5xt LP019AV #ABA

    Windows 7 64 bit

    My hardware ID are

    PCI\VEN_1814 & DEV_5390 & SUBSYS_F0511814 & REV_00

    PCI\VEN_1814 & DEV_5390 & SUBSYS_F0511814

    PCI\VEN_1814 & DEV_5390 & CC_028000

    PCI\VEN_1814 & DEV_5390 & CC_0280

    I'm looking for the driver suitable for download thanks to all software.

    Hello

    Sorry for the late reply, but I have worked overseas for much of this week

    Try this alternative driver on the link below.

    http://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53377.exe

    This installs Ok or you we the same error message?

    Best regards

    DP - K

  • SMB and USB controller drivers

    I have a DV6-7010us.

    Upgrade online win8 failed and I've never done a recovery disk.

    Need drivers links:

    OTHER FEATURES:

    SM bus controller:
    PCI\VEN_1022 & DEV_780B & SUBSYS_182D103C & REV_14
    PCI\VEN_1022 & DEV_780B & SUBSYS_182D103C
    PCI\VEN_1022 & DEV_780B & CC_0C0500
    PCI\VEN_1022 & DEV_780B & CC_0C05

    USB bus controllers:
    PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C & REV_03
    PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C
    PCI\VEN_1022 & DEV_7812 & CC_0C0330
    PCI\VEN_1022 & DEV_7812 & CC_0C03

    USB bus controllers:
    PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C & REV_03
    PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C
    PCI\VEN_1022 & DEV_7812 & CC_0C0330
    PCI\VEN_1022 & DEV_7812 & CC_0C03

    Thank you

    Hello:

    I guess that you need them for W7 64 bit?

    Download and install the AMD chipset driver. A first on the list.

    http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

    Paul

  • Downgrade to XP and USB controller

    Pavilion dv9500... downgraded to XP Home (clean install) of Vista... need to card drivers mother/chipset to enable USB support appropriate. Universal USB Enhanced Host Controllers are installed (according to the Device Manager), but all the USB Root Hub shows the error message (damaged or missing driver). Have no recovery disks (all the stuff of additional drivers are for Vista).

    Repair of USB drivers accomplished just by uninstalling all USB entries in device, reboot XP Manager and allowing XP to 'rediscover' and reload the correct drivers. Thanks to Cheryl G.

  • I need communication controller simple PCI and usb controller drivers

    I want drivers for above two controllers

    model: 15-d103tx

    product no: G2G48PA #ACJ

    My os is windows 7 ultimate 32 bit

    Hello:

    Here are links to the drivers you need...

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123657_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_128883_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • Yellow mark points - controller Ethernet & USB Controller

    I have a dimension 4550 o/s Windows XP Professional 2002. I have never used the computer on the Internet, but note that there are of the yellow question marks next to the Ethernet and USB Controller controller. Now, I need to use the computer on the internet and of course need of these at work. Go to the search on this site, I have re-installed the Chipset Driver and she appeared "found new hardware" for both. However, so what goes in the "found new hardware found' it asks to install the software. I tried to insert the resource CD that came with the pc, but cannot find the required software. In addition, I cant get onto the internet to find the required software. Any ideas please?

    First of all, be aware that Windows XP reaches the end of life in April 2014 for more information, see Service Pack 3 for XP and Office 2003 end of life April 2014. Continued use of Windows XP should be avoided.

    Assuming that you are willing to connect Windows XP to the internet, you must install at least Service Pack 3 XP: http://www.microsoft.com/en-us/download/details.aspx?id=24

    It is also recommended to install Microsoft Security Essentials: http://windows.microsoft.com/en-gb/windows/security-essentials-all-versions and its last definition to minimize the risk of having a Windows XP installation without patch: http://support.microsoft.com/kb/971606 (32 bit)

    You need to install the Dell system software: http://ftp.dell.com/utility/Dell_System-Software_A06_R288017.exe

    Intel Chipset Device Software: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775

    For the controller network and video device provide the hardware ID as there are variants to this model. See the Windows reinstallation Guide / a Clean Install of Windows XP step 12: http://philipyip.wordpress.com/dell-community-forums/

    As mentioned above the drivers need to be downloaded on a USB stick using another PC.

Maybe you are looking for

  • Unregistered copy OR Vision?

    Hello I run a program, I developed, which uses the Vision live. I have packed the VI using the Application Builder in a .exe and running it on a computer of the laboratory that has only an expired version of LabVIEW installed, if there is an active a

  • Installation/update von DataPlugins by Script

    Hallo zusammen, STIs are possible VBScript Dataplugins by Script DIAdem zu installieren und zu aktualisieren? STIs are if necessary. possible das DIAdem auf Dataplugins auf einem zentalen network zugreift? ICH betreue about 25 customers und da ist ar

  • When I go to Windows movie do I click on 'Digital camera' and it won't let me record go on my webcam.

    Title: original ideas: insert an error code or give a brief description of what you're trying to accomplish or difficult. __ I have a webcam built into my laptop. When I go to Windows movie do I click on 'Digital camera' and it won't let me record go

  • Where is the support for us Mac users?

    I lost a lot of my time this morning looking for an online manual for the C7280 all-in-One to use with my MacBook Pro, OS 10.7.5. It seems that * everything * I find is based on Windows. Any help out there?

  • Upgrade to Windows 7 and would like to know if all my tablet/pen functions still work?

    Original title: Windows7 and Tablet PC I have a Gateway Tablet PC.  He who is like a laptop, not these new without a keyboard.  For some reason, she has two model numbers: TA1.0 and M280E.  At the moment it has Windows XP (gateway) Tablet PC edition