400,101004 error 'unknown error' - a kind of connection problem

Similar Questions

• (Error code 31) wireless connection problem

  I just got a hp envy 14 t-1000cto I bought refurbished.  I'm with windows 7 64 bit.  After that start I tried to connect to my wireless, but not network could not do it because the wireless device was disabled.  I could not turn the device on with Wireless Assistant so I got a Manager to look and there was a window for my Intel Centrino Advanced - N 6200, 31 error code stating that it could not load the driver for the device.  At this time, the F10 button lan could be turned on and off and the Bluetooth was on and working.  I went to the hp support site, downloaded the latest driver for the n-6200 chip, uninstall the old driver and then installed a new.  Now my lan F10 button does nothing, I lost the bluetooth drivers (they are not in the Device Manager any longer) and I can not connect to my wireless network, because the wireless device is not you. dnrp on.  Any help would be greatly appreciated.  Thank you.

  Error 31: http://support.microsoft.com/kb/310123

  Recommended resolution: update driver

  Do not use the driver from the HP website. Use the latest Intel. This driver works for me for the same card: http://downloadmirror.intel.com/18748/eng/ICS_Ds64.exe

  Uninstall all wireless drivers and delete the SWsetup folder if they are present. After this restart, install the wifi driver. Get the wifi works first and bluetooth after...

  
  

• Adobe Muse Business Catalyst error 400/101004 - please help!

  I'm trying to publish a site muse to the catalyst for business and keep this error.  "An Adobe Business Catalyst [400, 101004] unexpected error has occurred. This can be caused by a temporary outage for maintenance. Click ok to view the status of the Adobe Business Catalyst system. »

  When I click on OK - it doesn't show any problems.  I have disconnected and back, close etc. STILL STUCK, please help.

  Please stop Muse. Then go to the application desktop creative cloud and in the preferences (menu on the gear icon) Sign Out. Wait 60 seconds, then start Muse. It should invite you to connect. Once connected try to publish again.

  If the publication still does not work, you probably want to contact support by Chat or phone. For making this visit Contact Customer Care>, select Adobe Muse, ' how to and resolution of the problems ","Troubleshooting", then click on" still need help? Contact us"and click on the Chat or by phone.

  A 101004 is a mistake of the credentials. Signing out and back in should solve. If it's not, then there may be a problem with your account on Business Catalyst or a mismatch between your information ID Adobe Creative cloud and Business Catalyst.

• Could not publish the package of transfer - unknown error (failed the nfc connection)

  Hello

  I finally installed see almost all packages, only the transfer option is left.

  I have configured the server, installed a certificate, and now I want to publish the main image in the repository of transfer for the linked clone desktops.

  The beginning of the publishing process, it initializes, progress to 0% and he breaks up with an error message "could not publish the package to transfer."

  Everything is setuped very well, the repository is shared correctly, inside the folder "Processing" a new folder with the ID of the publication process is created, inside this folder is created a new folder named "work", but there is nothing inside.

  OK, I looked in the file transfer server debug log:

  
  

  2011-04-26 13:54:50, 776 < Thread-6 > [RepoMessageHelper] DEBUG message filter received: Type = RepoLifeCycle, RepoOperationName = COURSE, GUID = 6f84bcab-8f85-47f0-8fd7-8ced7dd9e90a
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] unable to connect to the server esx1.atb - potsdam.de:902: unknown error 10060 (0x274c)
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] CnxAuthdConnect: returning false because CnxAuthdConnectTCP has failed
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] CnxConnectAuthd: returning false because CnxAuthdConnect has failed
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] Cnx_Connect: returning false because CnxConnectAuthd has failed
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] Cnx_Connect: error message: unable to connect to server esx1.atb - potsdam.de:902
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] TicketNFCOperations::TicketNFCOperations: could not establish NFC connection: unable to connect to server esx1.atb - potsdam.de:902.
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] MVDIServer_CreateTransferFilesForPublish: error opening of session of the NFC.
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] MVDIServer_CreateTransferFilesForPublish: completed.
  2011-04-26 13:54:54, ERROR < MessageFrameWorkDispatch > 011 [ws_mvdi] failed to make the NFC connection to host ' esx1.atb - potsdam.de' while trying to generate files for transfer to desktop PC "serverDn.
  2011-04-26 13:54:54, ERROR 011 < PublishWorker-6f84bcab-8f85-47f0-8fd7-8ced7dd9e90a > [PublishWorker] package transfer error editing: 6f84bcab-8f85-47f0-8fd7-8ced7dd9e90a com.vmware.vdi.transfer.imagerepository.PublishWorker.run(SourceFile:123)
  com.vmware.vdi.transfer.commoncontrol.TransferServerException: Mvdi error occurred during queue: mvdi, Tip: createTransferFilesForPublish. Mvdi error code: 1
  at com.vmware.vdi.transfer.commoncontrol.TransferServerException.fromFrameworkError(SourceFile:68)
  at com.vmware.vdi.transfer.imagerepository.DiskBasedPublishWorker.a(SourceFile:402)
  at com.vmware.vdi.transfer.imagerepository.PublishWorker.run(SourceFile:85)
  at java.lang.Thread.run(Thread.java:619)
  2011-04-26 13:55, 776 < Thread-8 > [RepoMessageHelper] DEBUG message filter received: Type = RepoLifeCycle, RepoOperationName = COURSE, GUID = 6f84bcab-8f85-47f0-8fd7-8ced7dd9e90a
  2011-04-26 13:55:12, 261 DEBUG < MessageFrameWorkDispatch > [ws_vmx] Rpci: send request = 'machine.id.get'
  2011-04-26 13:55:12, 261 DEBUG < MessageFrameWorkDispatch > [ws_vmx] Rpci: Envoy request = 'machine.id.get', reply ='vdi.broker.useSvi = 0;

  I searched on Google, the VMware KBs, this forum, I have no solutions for this problem.

  You have the forwarding server in the same ESX/Cluster as desktop computers to be transffered?

  Also check if the forwarding server can contact esx on port 902

  ----------------

  > [ws_mvdi] unable to connect to the server esx1.atb - potsdam.de:902: unknown error 10060 (0x274c)
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] CnxAuthdConnect: returning false because CnxAuthdConnectTCP has failed
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] CnxConnectAuthd: returning false because CnxAuthdConnect failed
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] Cnx_Connect: returning false because CnxConnectAuthd has failed
  2011-04-26 13:54:54, DEBUG 011 [ws_mvdi] Cnx_Connect: error message: unable to connect to server esx1.atb - potsdam.de:902
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] TicketNFCOperations::TicketNFCOperations: could not establish NFC connection: unable to connect to server esx1.atb - potsdam.de:902.
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] MVDIServer_CreateTransferFilesForPublish: error opening of session of the NFC.
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] MVDIServer_CreateTransferFilesForPublish: completed.
  2011-04-26 13:54:54, ERROR 011 [ws_mvdi] failed to make the NFC connection to host ' esx1.atb - potsdam.de' while trying to generate files for transfer to desktop PC "serverDn.

  ----------------------

  -noble

• 400, 101004

  No matter what I do I get: an Adobe Business Catalyst [400, 101004] unexpected error has occurred. This can be caused by a temporary outage for maintenance. Click OK to view the status of Adobe Business Catalyst >

  Connected to... removed Pref... Out of desperation I did a new install of Muse 2014... still not "an Adobe Business Catalyst [400, 101004] unexpected error has occurred. This can be caused by a temporary outage for maintenance. ' Click OK to display the status of Adobe Business Catalyst >.

  There was a temporary problem ongoing end BC that was resolved after a while.

  Please try again and if you still get an error even, let me know the details of the error and site url.

  http://status.BusinessCatalyst.com/

  Thank you

  Sanjit

• Error: A connection has been established with the server, but then an error occurred during the connection process.

  Hello

  I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

  ID from step 1

  Server NIBKSQLCLUST

  Job name LSBackup_DRIB

  Newspaper log shipping backup job step name.

  Time 00:00:02

  SQL severity 0

  SQL Message ID 0

  Operator by e-mail

  Operator Net sent

  Operator paged

  Retries attempted 0

  Message

  2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

  2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

  2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

  2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

  The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

  Thank you

  Boonlep coulibaly

  Hello

  I suggest you to send your request from the link and check.

  http://msdn.Microsoft.com/en-us/hh361695.aspx

  http://msdn.Microsoft.com/en-us/library/bb545450.aspx

• Windows 10 fatal error: Acrobat failed to connect to a DDE server

  Today I couldn't open a pdf document by double-clicking on it in Windows Explorer. Apparently, nothing happened. Finally, I opened right click and chose with... Chrome. It worked. The default value is Adobe Acrobat Reader DC. I found later, after the closure of the browser widow, dialog windows three under. Said dialog boxes "fatal error / Acrobat failed to connect to a DDE server.»

  When double checking so that writing this post, I found that by double clicking on a PDF document opens on board - and that works too. Right-click, context menu's 'Open' in the top of the page and more restraint, 'Open with->' and Adobe Acrobat Reader ms at the top of the submenu.
  I just tried the Adobe Acrobat Reader DC selection and nothing I happening. I reduced all the windows one by one to see if a dialogue window appears, but no.

  Googling the error message turned up a suggestion to set a registry entry, but the entry was already the suggested value: HKCR\acrobat\shell\open\ddeexec\application: default: REG_SZ: AcroViewR10,.
  
  

  What type of server Acrobat tries to connect with? How to? Acrobat Connect to the Explorer window for the file name?
  With no information to go, how you can help out us, other than the nuclear option: reinstall everything?

  Thank you

  Hi Cacadriil,

  Please see the steps described in this thread for similar problem: I get the 'acrobat fail send a DDE command'

  Check if this may help solve the problem.

  Kind regards

  Meenakshi

• Payment details: error! There is a problem with your last payment

  Payment details: error! There is a problem with your last payment.

  Update your billing for the service information is available without interruption.

  No matter how many times I update the payment details in order to activate the subscription again, the program cannot be opened. Every time after a few minutes the same error reappeared.

  What can I do?

  Thank you!

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• When I try to convert a .pdf file to Excel, I have an error message 'no internet connection' and I'm connected to the internet.  Happen in different contexts of internet access.

  When I try to convert a .pdf file to Excel, I have an error message 'no internet connection' and I'm connected to the internet.  Happen in different contexts of internet access.

  Hi rhondas44981464,

  Try to use the export to PDF online service https://cloud.acrobat.com/exportpdf (Sign In using your adobe ID, in which you have the subscription).

  Kind regards
  Nicos

• Does not open Acrobat DC - error "Acrobat failed to connect to a DDE server.

  Does not open Acrobat DC - error "Acrobat failed to connect to a DDE server.

  Hi mhantson,

  Try the solutions below: -.

  Solution 1) (this error occurs when you have more than 1 process of Acrobat running)

  • (1) go to the task by pressing Ctrl + Alt + Del Manager
  • (2) go to the process in the Task Manager
  • (3) terminate all processes associated with Acrobat
  • (4) start Acrobat again.

  Solution 2) open Acrobat access to menu help & repair installation.

  Solution 3) control the association of file on your system.

  Solution 4) course for HKEY_CLASSES_ROOT\acrobat\shell\open\ddeexec\application and change the "AcroviewA11"key to "AcroviewR11.

  Kind regards

  Nicos

• Hello. I have a problem with the payment process when trying to buy the plan of creative photography of Cloud (one year). the error is: there was a problem processing your order, please contact our Service team customer care for assistance. AfricaBa North

  Hello. I have a problem with the payment process when trying to buy the plan of creative photography of Cloud (one year).

  the error is: there was a problem processing your order, please contact our Service team customer care for assistance. Middle East & North AfricaBahrain: 80081097Egypt: 08000000447Jordan/Kuwait/Lebanon/Qatar/Yemen: English + 44 207 365 0735Jordan/Kuwait/Lebanon/Qatar/Yemen: Arabic/French + 44 203 564 4145Oman: 80077173Saudi Arabia: 8008446638Tunisia, the Morocco and the Algeria: + 33 United Arab Emirates 157324642United: 80004443085Commonthwealth of independent States (CIS): + 44 207 365 0735

  Help me please to solve this problem. I need my lightroom immediately)

  Hi mohamed,.

  Please see the link below to buy the plan of photography:

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

  In case you still have question, please contact sales at Adobe team.

  Adobe Middle East and North Africa

  Kind regards

  Sheena

• opatch 10.1.2 Oracle Home - ERROR: OPatch failed due to problems in the area of patch.

  Hi all

  DB: 11.2.0.3.0

  EBS:12.1.3

  Operating systems: Solaris SPARC 64-bit

  I get the following error message on the command below:

  opatch $ apply - invPtrLoc $ORACLE_HOME/oraInst.loc

  Setup Oracle interim Patch version 1.0.0.0.64
  Copyright (c) 2011 Oracle Corporation. All rights reserved...

  Oracle recommends using the latest version of OPatch
  and read the OPatch documentation in the docs/OPatch
  Directory for its use. For more information on the last OPatch and
  other support issues, please refer to document ID 293369.1
  available on My Oracle Support (https://myoraclesupport.oracle.com)

  Oracle home: /d001/test1/apps/tech_st/10.1.2
  The Oracle Home Inventory: /d001/test1/apps/tech_st/10.1.2/inventory
  Inventory Center: / export/home/applmgr/oraInventory
  from: /var/opt/oracle/oraInst.loc
  YES location: /d001/test1/apps/tech_st/10.1.2/oui
  YES shared library: /d001/test1/apps/tech_st/10.1.2/oui/lib/solaris/liboraInstaller.so
  Location of Java: /d001/test1/apps/tech_st/10.1.2/jdk/jre/bin/java
  Location of the log file: /d001/test1/apps/tech_st/10.1.2/.patch_storage/ < patch ID > / *.log

  The patch directory field must be a number.

  ERROR: OPatch failed due to problems in the area of patch.

  $ opatch version

  Setup Oracle interim Patch version 1.0.0.0.64
  Copyright (c) 2011 Oracle Corporation. All rights reserved...

  Oracle recommends using the latest version of OPatch
  and read the OPatch documentation in the docs/OPatch
  Directory for its use. For more information on the last OPatch and
  other support issues, please refer to document ID 293369.1
  available on My Oracle Support (https://myoraclesupport.oracle.com)

  OPatch Version: 1.0.0.0.64

  Tried the underside of the notes but the error persists. Even tried several times 'p6880880_101000_SOLARIS64.zip' to download and unzip on the server, but of no use. This question took place now for a few days.

  (Error: OPatch failed due to problems in the area of the Patch [ID 1281504.1]).

  Opatch error: The Patch Directory area must be a number [258650.1 ID]

  O patch 1.0 . 0.0.55 fails with the error 'the Patch directory field must be a number' [ID 394601.1]

  Patch Directory area must be a number: Opatch returns with the Code error = 170 [369555.1 ID]

  Please let me know any other suggestion is appreciated as the runinstaller from Patch 5983622 -Upgrade to Forms 10 g OracleAS and statement 10.1.2.3 (437878,1) fails after running root.sh Run specific tasks.

  I'm upgrading to 10.1.2.3.0 forms using - reclassification OracleAS g 10 forms and States to 10.1.2.3 (437878.1)

  Thank you for your time

  Kind regards

  user10088255

  Hi user10088255,

  Please follow the procedure under the section 'How to check the contents of the inventory Central' (Doc ID 742477.1) to check whether or not 10.1.2 ORACLE_HOME is registered in the central inventory. If it is not registered then follow one of the methods in the same doc to add.

  Thank you

  Hussein

• Error: [REP_55102] unable to connect to the service of filing [BIA_RS]

  Hi all
  
  I get this error "[REP_55102] unable to connect to the repository service [BIA_RS]" when I tried to connect to Informatica Repository Manager client to server Informatica which is insallted in another machine. When I checked the log "pmreplib.log" file, it says "ERROR: REP_51147 [Mon Feb 04 15:21:11 2013]: (7216 |)» 7680) cannot connect to the repository on the host: oracle2go, Port: 6013. ».
  
  In the background, as Informatica Server is installed in another machine, we have limits to access the ports. This is why I changed all default Informatica ports by running the below command...
  ./infasetup.sh UpdateGatewayNode-asp 5503 of na oracle2go:5501 - ap 5502 - sp - 5504 - sv 5505
  
  Although I changed ports to 5501 and 5502, 5503, 5504, 5505. I don't know why the client uses port 6013 and I don't know where this port number is coming.
  Could you get it someone please let me know how can I change this port (6013), so that I can connect the Informatica customer.
  
  Thank you
  Harish Nunn

  Hi Harish,

  On the Client Informatica Repository Manager Gateway numbers and the port are provided to connect to the repository server that runs on the given gateway and port. In your case, my understanding was that the Informatica repository is running on the 5501.

  So I think that you did not change to the port number in the administration console Informatica. So in Informatica Adminconsole node configurations change the port number to 60xx 50xx. There are 2 entrances to the repository server and the numbers of ports of the max and min of Integration Services. Once you change them restart the Services of Informatica.

  Let me know if it worked.

  Kind regards
  Jay

• Error 100, help solve this problem?

  Error 100, help solve this problem?

  Hello

  Error 100 usually comes when the download wizard is not able to communicate with the Adobe.com site. Please follow the given ko: http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assista nt.html #main_Solution_1 for more information.

  Such direct download suggested by Mylenium try.

  Kind regards

  Romit Sinha

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?