4130 PXI channel 1 red led output

Similar Questions

• Mac Pro Tower 2012 Unresponsive (Power Light On, red LED turn on)

  Found my Mac Pro 2012 Tower responds more today with the power led and a red led light on the inside of the tower.  The subject of research and could not find anyone who had this exact question (unless I'm missing something) and I also have trouble understanding what LED light and how do I proceed.  Any advice would be greatly appreciated

  

  Remove all external and off devices, disconnect all external cables

  Check your GPU for dust/dirt/creep (where it "fits" of the socket), you can remove it but when undertaking this make sure that you are properly grounded at all times and the components are put in static free containers, then clean the inside of the computer with compressed air ensuring that you damage the connectors not blowing the white point.

  Replace the GPU and follow the instructions to reset the SMC.

  Reset the management system (SCM) controller on your Mac - Apple Support

  See the yellow highlight

  

  Plug directly into a wall outlet connected to the ground not a power strip or battery backup.

  otherwise, to replace the CMOS battery on the logic board, after that leave the device unplugged for 30 minutes or more.

• Red LED of my audio jack of my Y400

  Hi, please help with my strange problem, I get light red Led of my audio and audio input jack input jack does not work please help and how to fix the ti. Speakers are working correctly.

  When you plug in your headphones and opent it Manager audio realtek DD does say sound plugged in on the right side?

• Red LED light flashes 3 times, two sec pause and so on

  I have a Dx5150 MT, Windows XP with this problem:

  Red LED light flashes 3 times, two sec pause and so on.

  According to http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00868914&lang=en&cc=us&taskI...

  Reinstall the processor, but the problem persists.

  Solved by removing the battery.

  georgopgr wrote:

  I have a Dx5150 MT, Windows XP with this problem:

  Red LED light flashes 3 times, two sec pause and so on.

  According to http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00868914&lang=en&cc=us&taskId=&prodSeriesId=447468&prodTypeId=12454

  Reinstall the processor, but the problem persists.

• Red led when the load

  Today I turned on my laptop and everything was ok. I was playing the games, etc., and charger was functioning normally, after he charged my battery I turned it off, I was getting ready to go outside, but suddenly my charger has stopped. I tried to make it work (take out the battery and try it), after that it worked I was ok, but then after appeared blue led it went into the red. My laptop is in charge, but there is that annoying red led and I do not know can it be bad hardware laptops. I quess that means my laptop recharges slower, but I want to check with someone who knows better than me

  http://prntscr.com/3xxann

  now, after he went on 50% Blue led is back is quess problem is now resolved, I still never red led as far

• won't turn on / blinking red led

  Hi all, got my xperia z3 for about two weeks, not rooted, not unlocked, without modification. Yesterday before going to sleep, that's with more than half of the akku, today like im awake and had in my hands, it was off, im connected charging cable, perhaps thought that the battery was empty, but nothing happening yet, its just blinking red (led).
  Was trying to hold power + volume up, nothing.
  RESET button near sim doesn't work for me either - I am just notice 3 x vibrations and that is it, its just repeat vibrate 3 times x again and again but nothing happens, no start.

  ?

  Of course, do.

• Red LED

  Which include the Red led mean?

  I plugged a USB and the led turned red, then phone turns off.

  Can't do anything except the red light goes on after I plug it.

  No download, no vibrations and without flashing mode.

  No idea what happened except that maybe the usb was the water does not destroy?

  It was raining a bit this morning and the cord is in my backpack which was exposed to the rain of the said.

  Certainly did not feel all wet, but maybe a drop of water or something in one of the connectors.

  The other end was plugged into my laptop, and the port still works fine.

  Hi JHauss,

  The increase in the Volume and Power set button allow the handset perform a mock, mainly battery pull allowing the boot device in the appropriate mode.

• Boot of of Smartphone blackBerry, watch only flashing red LED...

  I am led into the wall here right now everyone, sorry to make my first post as a report disaster but here goes nothin' ':

  I bought a "BOLD" on ebay a few weeks ago and everything was fine except for the fact that 2 days after getting it the keyboard stopped working. There is no solution possible workaround, the man that I bought on eBay sent me another (very nice of him) I received today. I go to AT & T to set up and it went very well, I come home with the new phone and connect it to synchronize my data. He said all of a sudden (update failed), which confused me because I'm trying to update whatever it is and now it won't start or work or anything. It goes to show a flashing red LED. I can't appear in the Desktop Manager, I can get it to reinstall with the application loader. I just went back to AT & T and as usual that they told me they couldn't help me.

  I'm really really REALLY aggravated at this time, and I could desperately use someone's help. How can I reinstall the operating system if I can't answer?

  The software seems to be corrupted.

  Make sure you have the latest version of the software for your device and your carrier installed on the computer.

  YOU get this on the carrier's website according to your phone, the ID of the SELLER. MAKE SURE YOU DO A VENDOR ID CHECK to see which provider the software must come.

  It's the device, software, not the Office Manager.

  Once done, go to drive C: Program Files: common files: Research in Motion: App Loader and double-click on loader.exe.

  Once the Welcome screen appears, plug in the appliance WITHOUT the battery and click Next. When you see the PIN number appear after maybe a few minutes press next.

  Once he arrives at the device application part, put the battery in.

  On the last page before you click on finish, you see an option "EITHER", click here and make sure that both check boxes are fixed.

  This will fix the problem.

• BlackBerry Smartphones red LED does not

  My bright red LED message does not at all. How doi switch on? Please be specific to the topic where the icon or other path lie, thank you... (you wish that I did not leave the ATT store to talk to me in this unit!)

  The LED may blink for several reasons... the a main notification messages.

  To change a profile of notification on a BlackBerry smartphone using BlackBerry® Device Software 6.0, follow these steps:

  1. On the BlackBerry smartphone home screen, click profiles.
  2. In the notification profile list, click on change sounds and alerts.
  3. Click on sounds for the selected profile.
  4. Click on the application to change. Example: Messages Messages, calendar or level 1.
  5. Make the changes.
  6. Open the Menu and click Save.

  In step 4 above, click your messages and a corresponding email account, you will see the function of Visual alerts, the value IT for the red LED flashes when you receive a message.

• BlackBerry Smartphones RED LED Blackberry Torch 9800

  Good evening I have a torch 9800 Blackberry, he walked very sure when I closed it as the screen went out, but I had to press the button to unbolt to disfigure to switch on the appliance again. And suddenly hegoes outside and a RED LED lights up, I try to re install the IOS it doesn't. I don't think that it follows from the battery.

  Thank you im im french translator thank you use.

  BBSAK: ERROR: No device Detected, ok Pus continue.

  

• Smartphones blackBerry-storm of brick / solid red LED for 15 seconds every 60 seconds

  I searched through these forums and not found a similar problem / solution.

  I also tried the solutions provided in articles like "Blackberry 101: how to reload the operating system on a Nuked Blackberry", but those who have not worked or the other.

  Here's the situation:

  My Storm was working fine but after that he had been in charge for a while, I found that it was insensitive.  Black screen, no response to buttons.  I removed the battery and reinsert. It came with a white screen and the hourglass.  After about 60-90 seconds, the screen came out again and don't come back or answer.  I pulled the battery again and got absolutely no response from the screen.  Now, the only thing that happens is that the red LED lights for a solid 15 seconds, then 60 seconds; This repeats itself indefinitely.  Long battery life is nothing changed.

  When I tried the above solutions using the Loader.exe app, I could never for the computer to recognize that the phone has been connected to the USB port. "COM" has never changed settings of "USB: unknown PIN" so that I could pass on the next steps.  I tried to do that during these 15 seconds the Red led on the thought that maybe the only time where I could connect, but nothing helped.  I used a USB direct cable and not a hub.

  Now, here's my story of sobbing: I'm stuck in the hospital with a sick member of the family and the nearest Verizon store is 80 miles away... and I can't really leave.  So, if anyone has any suggestions on what to try next, I'd appreciate it certainly all the assistance!

  Thank you!

  Oh and I didin't really answer your question on the DM...

  I download the latest version of the DM and the authorized Verizon OS.  Yet once, however, since I can't connect the phone, I not was able to use all of it.

• Looking for a GPIB syntax for the test on the channel Code to reverse output power precision driver

  Hi all

  I'm working on a module with Labview for a 'Channel of Code to reverse output driver power precision' test.

  Here is the link I received from Agilient:

  http://Wireless.Agilent.com/rfcomms/refdocs/cdma2k/cdma2000_gen_op_overview_meas_wquality.php#BABCHH...

  The criterion should be pretty simple, but I have not any syntax GPIB of the machine when using on this subject.

  It would be graceful as any example of programming could be provided.

  Enjoy,

  + Kunsheng Chen

  Thank you, StevieZ.   The problem has been solved, I does not recognize that the test had already been done before.

• BlackBerry Smartphones change when red LED flashes

  I didn't really need my phone to Flash a red light whenever I get by e-mail. Someone can tell me how to change it so that it either is not flash at all, or only flashes with msg text or phone call.

  Thank you

  Renae

  From your home screen, click on the speaker icon in the upper left corner, under the date.  In the pop-up window, select change sounds and alerts.  Click on sounds for the selected profile.  Click on Messages - authors of notifications.  Click on your e-mail and Visual alerts (LED), change to off.  Press menu, and select Save.

  Let us know if we can help with anything else.

  EDIT: Uh, Boomer response is good, too.  Now you have the choice!

• BlackBerry Smartphones why is the flashing of the red LED?

  Hello.

  I've got the light of broad coverage.  The LED flashes if I'm on Bluetooth and if I get BBM etc, but I have nothing running, the red light blinks.

  (1) can I turn off the red light

  (2) can I turn off Bluetooth flashes too?

  Sorted.  Found the answer in the help files.

  Just that I could delete this thread wish.

• Canon T1i photos: Red led Busy, seeds of the screen

  I have a Rebel T1i. It focuses, and then when I break the shutter button to take a picture it is red 1) busy seeing lights up for 3-10 seconds then go back to the main screen, but no image was taken or 2) will a screen looking for glitch and stays there until I out of the battery.

  Ive tried the passage AF MF, switching picture modes, replace the sd card, formatting of the sd card, battery replacement, battery charge, take off the goal of make all contacts are clean looking.

  It is not inttermintently, one of these two things happen every time.

  I've been in contact with a Support Canon technique. They say there is nothing I can do. It has undergone repairs. Or they offered my $30 for it through the Canon loyalty program.

  It's two rebel Canon, we had, each of which can last only about 4 years. I feel like they should last longer than under regular use (non-professional).