won't turn on / blinking red led

Similar Questions

• Tecra 8100 won't turn on no - DC led flashes orange

  Hello. Tonight I turned off my Tecra after working for hours without any problem. Now I try to turn it on and the DC led blinks with a light orange. the model is:

  Short-Short-Short-short-long-short-short-long

  and then the rehearsals...

  With battery, it's the same thing. It's strange because the battery seems to be getting charged...

  Thanks for your help.

  Hi Toka

  Only thing you can try is to remove the battery, then try again. If this doesn't help you should contact the partner in your country. I put t know what means this hexadecimal code, but there is a problem of electronic power supply.

• BlackBerry smartphone phone off of himself, now won't turn on and red light flashes

  My phone turn self off about 3 hours.  It turns not back, the CIM flashes red.  Looks like to me he's flashing 2 flashes long then 2 a small right now.  If he repeats continuously with 20-30 seconds between each.  I tried to plug it into my laptop but is not connected.  I'm OK with the computer, but not a lot, so if someone can help me?... Well explained or simple answer would help me lol.  Thanks Katie.

  keep try again.

  Plug the USB cable into the device and then run the cmd line file and see what happens.

  This process is good enough for saving devices. Be patient and try with the battery and the battery.

• The led "Alarm" on my Pixma MX310 won't turn off. What should do?

  The led "Alarm" on my MX310 won't turn off. I tried "Stop/Reset" and changed cartridge. I always get the msg "Check ink E150" on the screen. What should do?

  Hello

  This error indicates in general that the ink cartridge is not seated correctly.  Please try to take out ink and back again and don't forget to follow the guide step by step by CLICKING HERE.

  If the error persists, please join our team of technical support at the following link: CONTACT US.

• ES1 - 512 hibernate if it is open, but not with the lid closed. LED will blink red and blue?

  I want a laptop, when closed, to go to sleep, then transition to Hibernate.

  When open, transition work. Race walk, sleep, Hibernate.

  When closed, transition fails. Running, sleep (slow orange blinking), and then rapid blue/red flashing LED.
  During flicker battery consumption is large and the battery goes dead quickly.

  I have tried many power configuration settings.

  Cover-> nothing or sleep - same results.

  Cover-> hibernate - works, but is NOT what I want.

  Button to Hibernate, but not what I want.

  I want to do what it should - sleep and hibernation...

  What does glitter blue/red LED mean?

  OK, I found a workaround solution - with a caveat.

  The xHCI driver is apparently in conflict with something that causes chaos when the laptop tries to transition from sleep to Hibernate with the lid closed.

  This is definitely a bug that should be fixed! Acer needs to work with Microsoft to find the problem and fix it.

  If you go into the BIOS settings (reboot and press F2) and disable xHCI.

  The USB ports will return to PCI mode. All USB ports are working, even if I think they are USB 2.0, not 3.0

  Now the power level can be set to sleep when the lid is closed and it will cause a transition to Hibernate when appropriate!

• Mac Pro Tower 2012 Unresponsive (Power Light On, red LED turn on)

  Found my Mac Pro 2012 Tower responds more today with the power led and a red led light on the inside of the tower.  The subject of research and could not find anyone who had this exact question (unless I'm missing something) and I also have trouble understanding what LED light and how do I proceed.  Any advice would be greatly appreciated

  

  Remove all external and off devices, disconnect all external cables

  Check your GPU for dust/dirt/creep (where it "fits" of the socket), you can remove it but when undertaking this make sure that you are properly grounded at all times and the components are put in static free containers, then clean the inside of the computer with compressed air ensuring that you damage the connectors not blowing the white point.

  Replace the GPU and follow the instructions to reset the SMC.

  Reset the management system (SCM) controller on your Mac - Apple Support

  See the yellow highlight

  

  Plug directly into a wall outlet connected to the ground not a power strip or battery backup.

  otherwise, to replace the CMOS battery on the logic board, after that leave the device unplugged for 30 minutes or more.

• spectrex360: Start button / stop / flashing laptop won't turn on

  I just got the HP spectrum x 360 on the Store of MS (signature edition). The power button on the side flashes and it won't turn. I know that the battery is charged, because it is connected and there is a connedtion that the led is lit when the power cord is connedted to the laptop. But the power button continues to blink and I can't turn on the computer. I tried to tap on the screen and the Microsoft keyboard key. Any way to reset this? Thank you

  OK, I found the answer. It was a hard reset. Just hold the Start button for 20 seconds (or until it no longer flashes) then wait a bit and you can restart the laptop.

• PROBOOK 4530 S: MY LAPTOP WON'T TURN ON

  my laptop won't turn on... I tried a hard reset and still its doesn't turn is not on... If I plug the power supply cable there is no sign of life whatsoever.the power light does not turn on either

  the fan does not turn on... it is not even a single sound or sign of life... I changed the batteries... I changed the charger/power supply but still nothing.i have tried to reinstall the memory and even changed the hard drive, but still nothing and I now suspect the motherboard

  Have you tried to connect the laptop to a power adapter and then gently shake the power adapter connection to see if the power led blinks on and outside?

  Who will let you know if the problem is the connector of the DC adapter on the motherboard. They are not lacking.

• BlackBerry Smartphones Blackberry Bold 9700 won't turn on and keeps restarting!

  I only got my Blackberry "BOLD" for about 2 months. The camera was a little funny and don't zoom so I turned my phone off and took out the battery and succeeded him in an attempt to restart the phone. Now, it won't turn!

  When the battery is in the light of the red LED at the top right corner turns on then turns off when the phone starts showing the BLACKBERRY Logo on the screen with the loading bar under. The bar then shows it to load, but almost immediately, it freezes and turns off. She does several times, but I tried to remove and replace the battery several times.

  I'm sure that this is not a problem with the battery, I had only he alleged the night previous and even tried using another battery of my friends BlackBerry to check, but the continuous phone to turn on several occasions, crash, turn off.

  Anyone have a similar problem or know a solution? Thank you!

  Hey guys!

  I managed to fix my blackberry!

  The best and probably the only solution for a blackberry caught in a never-ending cycle of reset / or always show error messages is to perform a "Clean Reload of your Blackberry Device Software"!

  I found 2 websites more useful!

  This site is by Blackberry from Research in Motion themselves who teaches you how to perform a clean reload. It requires for you to have your cable USB Blackberry and Blackberry Manager installed on your computer. There is a clear process of no to no! However, there are some which confused me at first so just to clarify... in step 4 where they ask allows you to check that you don't have the latest version of the software installed... If your software device tab is empty as indicated in step 3, this means that you currently no. SOFTWARE INSTALLED and so should follow the link indicated in step 4 (or pasted below) to download (and install) the latest software for your blackberry phone model and service provider before performing a cleaning charge.

  For a clean reload:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB11320

  To download the latest version of the device software:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB12532

  NOTE: When you do a clean refill, you can see that the Blackberry Manager to first show your blackberry as "disconnected." If the Manager continues to install/reload the software for device on your blackberry with no complications, I wouldn't worry too much about not because once the own recharge is over and your device will restart the Blackberry Manager would show so your device as "connected."

  ------------------------------------------------------------------------------------------------------------------------------------------

  The second site (unofficial Blackberry Forum) basically explains / uses the same process but it is a little outdated and I found some differences in the Blackberry Manager software they use and some steps may no longer apply. However, it should be that if you find you have difficulty getting your BlackBerry connected to your Office Manager as constant rebooting CAN cause the device to connect and disconnect continuously, this site can be useful for more of this problem. I personally don't have this problem if I had expected, which can be a result of the latest models of Blackberry devices and software device etc.

  For more of the constant connecting and disconnecting your BlackBerry since the Blackberry Desktop Manager:

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Hope this helps!  x

• BlackBerry Smartphones why is the flashing of the red LED?

  Hello.

  I've got the light of broad coverage.  The LED flashes if I'm on Bluetooth and if I get BBM etc, but I have nothing running, the red light blinks.

  (1) can I turn off the red light

  (2) can I turn off Bluetooth flashes too?

  Sorted.  Found the answer in the help files.

  Just that I could delete this thread wish.

• Mac Pro 2014 Retina screen shows lightning under empty battery but won't turn on

  Screen shows lightning under empty battery, but won't turn on. I had plugged it with two adapters to support different (long and short) that accompanies the retina macbook 17 inches. Ive left plugged in for 24 hours and still will not light. I have tried reseting everything I saw on the forum other messages such as pressing shift-control-alt-power - release and then pressing button works / stop and nothing. Sometimes just showing the Red/low battery with Flash below the middle of the screen, but it will not activate. I have all my work on this computer and need to have on it.

  The green light on the magnetic charge cable is not, however, this has only worked from time to time and then for a while so I was not worried about it. Any advice?

  You have to go to an Apple Store or an authorized Service provider. The fact and take up virtually even with different Chargers, the indicator light on the MagSafe does not light up and the display on the screen of the cries of hardware problems. And these sealed Macs really are repairable no-no.

• Envy 15: Laptop stop abruptly. Won't turn on

  I bought this computer for my daughter to use for communication. She is 15 and non-verbal, so I need to fix this quickly for her. This laptop is only 7 months old and she has used about an hour a week, more it remains on a computer and are transferred so it shouldn't have ANY problems. I am so angry about this.
  
  Anyway, the computer made a glitch in his and stop even if the battery is fully charged. Now, it won't turn at all. When I hit the power button on the right LED flashes. The adapter seems to work very well. I did the hard restart, remove the battery and holding the power button. It did not work.

  Mommyswami

  While this PC is still under warranty, contact HP customer care directly so that they can put you in contact with HP Technical Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Red led when the load

  Today I turned on my laptop and everything was ok. I was playing the games, etc., and charger was functioning normally, after he charged my battery I turned it off, I was getting ready to go outside, but suddenly my charger has stopped. I tried to make it work (take out the battery and try it), after that it worked I was ok, but then after appeared blue led it went into the red. My laptop is in charge, but there is that annoying red led and I do not know can it be bad hardware laptops. I quess that means my laptop recharges slower, but I want to check with someone who knows better than me

  http://prntscr.com/3xxann

  now, after he went on 50% Blue led is back is quess problem is now resolved, I still never red led as far

• Red LED

  Which include the Red led mean?

  I plugged a USB and the led turned red, then phone turns off.

  Can't do anything except the red light goes on after I plug it.

  No download, no vibrations and without flashing mode.

  No idea what happened except that maybe the usb was the water does not destroy?

  It was raining a bit this morning and the cord is in my backpack which was exposed to the rain of the said.

  Certainly did not feel all wet, but maybe a drop of water or something in one of the connectors.

  The other end was plugged into my laptop, and the port still works fine.

  Hi JHauss,

  The increase in the Volume and Power set button allow the handset perform a mock, mainly battery pull allowing the boot device in the appropriate mode.

• BlackBerry Smartphones BlackBerry seems to load but won't turn on.

  Hi all

  A week ago, I wore my BB with me for 2 days, forgetting the home charger. Unconsciously, the battery died at the end of the first day in the open air.

  When I returned home I plugged on the OEM charger and my bb stuck there. He shows me the photo (the one with a lightning bolt in the middle) loading, I can feel the battery becomes hot when you are connected but the bb of the battery lights.

  When I unplug the charger, the image disappears, but if I try to turn it on, I see just the Red led of for a few seconds and then nothing.

  Office find the bb, but he said he met a mistake not better specified any connection trying to communicate with the phone. AppLoader show me the PIN but if I try to install the operating system it say that there is any installed BB Device Manager (but the BONE is).

  Is a 9300 3G Curve. An idea or a diagnosis?

  Thank you in advance, sorry for my bad English: I'm Italian.

  Oh... This is new information... you did not reveal those load times in your first post. And that information changes things indeed, we go directly to the battery replacement as your next attempt. Good luck!