4251 error when you try to burn a cd from itunes

Similar Questions

• Satellite L500-19 X - code error when you try to burn on DVD

  Error code: 380381-26 - 2A 037303 when you try to burn to DVD.

  Can anyone help?

  Hello

  What program you use for burning discs?
  What operating system is installed?
  What kind of blank DVDs you are using?

  To be honest, I can t say something about it and description of a sentence is too short in this case.

  I advise to use high-quality Verbatim or TDK media. I have pretty good experience with DVD-R DVD + R media.

• 'Burning disc error' when you try to burn a DVD

  Original title: I get the message "disc error" when trying to burn a DVD. I have recently restored factory settings and had no problem burning DVD previously. Any suggestions to fix this?

  I have a computer laptop advent 9117.

  Hi Adam,.

  What is the full and exact error message?

  I suggest you to refer to the article and see if it helps:

  Error message when you try to burn files on a recordable disc in Windows Vista: "there was an error burning this disc."

  http://support.Microsoft.com/kb/934544

  Let us know if it helps.

• Code 10 error when you try to burn cd/dvd

  error __code 10

  running windows 7 Home premium... gettig code 10 when trying to burn cd/dvd...can't can't find the part upper or lower filters... do I do...

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Gettings error when you try to burn a DVD or CD

  I am running vista and I downloaded the drivers for the driver but everytime I try to burn I get errors, nobody knows?

  Try to remove the CD filters in the registry:

  http://support.Microsoft.com/default.aspx?ID=314060

• Get the error when you try to burn Windows 7 pro disc: 0 x 8004005

  I downloaded windows 7 Professional (download 2 GB) and when I click on "launch" said to insert the DVD to burn to the disc. I put the disc in, it gets all the way to the end and then gives me this error code: 0 x 8004005 so I can't complete installation. what I'm doing.

  Download Windows 7 proper. ISO file

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  After you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (The steps are the same, except that you do not create a repair disk but complete an installation DVD)

  Note: Always use DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  = Upgrade to Vista =.

  First run the Windows 7 Compatibility Checker
  http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

  Windows 7 Upgrade Advisor
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15

  Here are answers to some common questions about the 32-bit versions and 64-bit Windows.
  http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspx

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  clean startup in Windows Vista and try the upgrade to Windows 7
  http://support.Microsoft.com/kb/929135
  (The steps # 1 a, 1 b, 1 c, 1 d and 1e)

  Disable or uninstall your anti-virus software and firewall temporarily.

  How to upgrade from Vista to Windows 7 Home Premium: http://www.howtogeek.com/howto/6892/how-to-perform-an-upgrade-from-vista-to-windows-7/

  Upgrade Windows Vista to Windows 7 (custom installation)
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom

  Also: Windows XP to Windows 7 Migration Guide
  http://TechNet.Microsoft.com/en-us/Windows/ee150430.aspx

  = XP update =.

  Upgrade Windows XP to Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  How to move from XP to Windows 7 in 4 easy steps
  http://www.MakeUseOf.com/tag/how-to-upgrade-from-XP-to-Windows-7-in-4-easy-steps/

  ===============  Keyless Install  ===============================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
  Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers =================================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• Windows Media Player error when you try to burn a CD-80004002

  Error code 80004002

  I have problems with cd burning and I get an error code 80004002... What should I do?... I already cleaned the cd and they type of cd is that I used all the time. Also, when I went to windows media player I clicked web help and they said to choose a speed slower recording, but after that I clicked on burn and more options... I didn't know where to go from there... I don't see the burning rate box that they are at.

  Hello
   
   
  1. what version of Windows Media Player is installed on your Windows Xp computer?
   
  Error 80004002/C00D10DA of Windows Media Player:
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5230&ID=C00D10DA&ContextId=30&OriginalID=80004002
  
  If you use Windows Media Player 9 or 10 refer to the article below to make the changes.
  Method 1.
  To select a slower burn speed:
  a. in Windows Media Player, click Options in the Tools menu.
  b. click the devices tab, and then double-click the name of the CD - R or CD - RW drive that you use.
  c. click on the recording tab and select a write speed that is slower or is the slowest available speed.
  d. click OK and then click OK.
  Reference:
  http://support.Microsoft.com/kb/306319
  
  Method 2.
  If you have Windows Media Player 11 refer to the article below to slow down the burning speed.
  Windows Media Player C00D10DA/80004002 error
  http://Windows.Microsoft.com/en-us/Windows7/C00D10DA
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Receiving the message 'Fatal Error' when you try to burn BluRay

  I've completed a project of BluRay and I am trying to burn on a DVD.  The process fine until it starts the burn process.  The project is about 19g and I am ttrying to burn to a 25g BD - R bluray.  It takes about 6 hours to go through the process.  When the progress meter displays 100%, it goes into the process of engraving and after a few minutes, I get the message "Fatal Error" and it is she, not other messages and nothing written for the bluray.  I find myself clicking on the "cancel" button which takes back me to the project.

  Execution of the Elements 7.0 on Windows 7 with a lot of horses.  Can give specifications if anyone thinks that this could be the problem.  Is there a way to burn the HD project to the computer and then use other software to burn on my burner internal Bluray?

  Use sharing/Personal Computer / MPEG with the 1440 x 1080 preset.

  It should load right in DVD Architect Studio and give you great results!

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to burn a CD or DVD: burner not found

  Burner not found

  HP Pavilion Vista Edition Home Premium, version 6. All of a sudden, I can't burn cd/dvd. It says drive not found. Everything is linked, so I have NO idea what is wrong or what happened. Any 'simple', laymens in terms of help would be appreciated. (this will not work with Roxio either... same answer, burner not found)

  HP Pavilion Vista Edition Home Premium, version 6. All of a sudden, I can't burn cd/dvd. It says drive not found. Everything is linked, so I have NO idea what is wrong or what happened. Any 'simple', laymens in terms of help would be appreciated. (this will not work with Roxio either... same answer, burner not found)

  ===================================
  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  It is possible that the reader has need for service or replacement.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Get 7 Volume Info.vi returns an error when you try to get the information from disk on the cRIO-9025

  Hello

  I use a cRIO-9025 controller and want to get the information from the c: disk volume using the function to read the Volume information in the palette file I/O. When I run the function with the path as "C:\". ", the function returns a 7 error indicating that the path is incorrect.

  I used this function before with cRIO but unfortunately I have not any older devices with me to check this out now. I'm using LabVIEW 2009 SP1.

  Thank you very much!

  See you soon!

  Sankah2k

  On real-time targets VxWorks, the root of the path of the file is here (in lowercase). Try and let us know if it works. You would be better to use the constant path of the file to understand what looks like the path of the root directory.

• What is error C00D1197 in windows media player when you try to burn a CD.?

  What is error C00D1197 in windows media player when you try to burn a CD.?

  Hello

  These should help:

  WMP - C00D1197
  http://Windows.Microsoft.com/en-us/Windows7/C00D1197

  Windows Media Player Error Message help
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D1197&ContextId=71&OriginalID=80070002

  Also check this KB which could apply to other versions of WMP
  http://support.Microsoft.com/kb/834483

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• "An error occurred" appears when you try to burn a CD

  After ordering the Windows Media Player 11 to START to BURN, a red circle with an X appears immediately to the bottom of the list of the songs selected for burning (in the title, in the middle of the main column).  CD were burned on this same burner, but I did not burn in about three months. Any suggestions?

  Hello

  ·        Do you have any third party burners installed on the system?

  ·        What is the exact error you get when you try to burn the CD?

  ·        You are able to use the CD drive for playback of the disc?

  I suggest you to try with another CD and check if you're able to burn or not.

  I suggest you run the fix it is present in the article below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Apart from that, I suggest you follow the steps mentioned in the article below.

  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP

  http://support.Microsoft.com/kb/324129

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ntdll.dll error message when you try to burn DVDs

  Help please.  I use Magix Movie Edit Pro 2014 and when you try to burn on a DVD I get the following error message:

  I've uninstalled and reinstalled the software nothing is done and cannot figure out how to solve this problem.  I use Windows 7.

  

  Hello

  You must contact the support for developers of this product.

  Concerning

• 8FFD020E and C00D11AB when you try to burn CDs

  original title: 8FFD020E and C00D11AB

  This error prevents appear when you try to burn CDs. Have tried all of the suggestions. This is a very common errror, a lot of people on the Internet asking about it!  I managed to burn a couple of week last CD, after the publication of this error. Now, does not burn yet. This should be fixed! What is the solution?

  Hello

  Method 1:
  You can run the fix - it from the following link.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems
  Method 2:
  You can read the following article.
  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
  http://support.Microsoft.com/kb/324129
  See also:
  How to copy information to a CD in Windows XP
  http://support.Microsoft.com/kb/306524
  How to troubleshoot Audio CD creation in Windows Media for Windows XP player
  http://support.Microsoft.com/kb/306319