Code 10 error when you try to burn cd/dvd
error __code 10
running windows 7 Home premium... gettig code 10 when trying to burn cd/dvd...can't can't find the part upper or lower filters... do I do...
Hello
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
Satellite L500-19 X - code error when you try to burn on DVD
Error code: 380381-26 - 2A 037303 when you try to burn to DVD.
Can anyone help?
Hello
What program you use for burning discs?
What operating system is installed?
What kind of blank DVDs you are using?To be honest, I can t say something about it and description of a sentence is too short in this case.
I advise to use high-quality Verbatim or TDK media. I have pretty good experience with DVD-R DVD + R media.
-
'Burning disc error' when you try to burn a DVD
Original title: I get the message "disc error" when trying to burn a DVD. I have recently restored factory settings and had no problem burning DVD previously. Any suggestions to fix this?
I have a computer laptop advent 9117.
Hi Adam,.
What is the full and exact error message?
I suggest you to refer to the article and see if it helps:
Error message when you try to burn files on a recordable disc in Windows Vista: "there was an error burning this disc."
http://support.Microsoft.com/kb/934544
Let us know if it helps.
-
Gettings error when you try to burn a DVD or CD
I am running vista and I downloaded the drivers for the driver but everytime I try to burn I get errors, nobody knows?
Try to remove the CD filters in the registry:
http://support.Microsoft.com/default.aspx?ID=314060
-
code 80070017 error when you try to downland microsoft office service pack 2 on vista
code 80070017 error when you try to download microsoft office service pack 2 for vista
0 X 80070017-2147024873 - ERROR_CRC
Data error (cyclic redundancy check).This problem may occur if there is a failure of control of cyclic redundancy (CRC) check during the update process. This failure can occur if the received file is not the file that is expected by Windows Update
Run the Chkdsk.exe tool to check the drive for errors
If this does not help, then manually download the update you need and see if that fixes the problem.
Description of 2007 Microsoft Office Suite Service Pack 2 (SP2) and of Microsoft Office Language Pack 2007 SP2
http://support.Microsoft.com/kb/953195 TaurArian [MVP] 2005-2010 - Update Services -
4251 error when you try to burn a cd from itunes
When you try to burn a playlist from itunes, I get the error code 4251. Help! I have recently started doing this but have been using itunes for centuries without any problem.
Post in Apple's Itunes, forums. Google for them.
-
Code 43 error when you try to reinstall the cloud creative cc
None of this fixed my situation... Finally I tried something no one suggested.
I mentioned the user Root (God mode) on my iMac
uninstalled and reinstalled the soft cloud
I then had full access to my loading apps.
I also deleted all caches using cocktail for mac.
And Voila!
Branched out in a new discussion.
Hi ArtisticBrit,
Please try the steps on this link to solve "Error Code 43": code 43 error when you install Adobe Creative Cloud.
Let us know if you need help with this.
Thank you.
-
I get the error code Ox643 when you try to install the update for flash player (KB923789) security - after Mr fixit running and the application of other measures recommended, I still have the error code and get the installation error code. What should I do now?
Is Adobe Flash Player v11.3.300.257 (or higher) installed? Test here using Internet Explorer (only!)-online http://www.adobe.com/products/flash/about/
-
Code 0x64C error when you try to install KB2416477
"Security Update for Michrosoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2416447)" repeatedly fails. Under XP Pro. What I would do.
Hi PJB1135,
- Did you the latest changes on the computer?
- You are able to install some other updates on the computer?
- You have security software installed on the computer?
Method 1
I suggest that you manually download and install the update, check if it installs successfully.
Security Update for Microsoft .NET Framework 1.1 Service Pack 1 on Windows XP, Windows Server 2003 (64-bit), Windows Vista and Windows Server 2008
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=17440
Method 2
See the Microsoft article below and try the steps mentioned, check if it helps.
You receive the error 0 x 643, error code 0 x 80070643 or updates may be offered again when you try to install the .NET Framework updates when you use Windows Update or Microsoft Updates
-
Get the 7 output code fatal error when you try to resolve plugin problem
Exit 7 code fatal error 0, 81 errors, 48 warnings when you try to solve problem of plugin when you restore the default set of PS CS5 > relocation of the installation with SN disc accepted.
Errors ' Exit Code: 6, "" Exit Code: 7 ".
Mylenium
-
Code 646 error when you try to run windows update
I have IE8 vista SP1. I could not successfully download updates for the month. Tried resetting it automatic download and install manual. Then, I selected just 1 update for MS Office. There was the same code 646 error when trying to install just 1 updates necessary.
Read the problems known in this page, they explain what to do. There is a link to a fix the article.
http://support.Microsoft.com/kb/2258121>
Let us know if this helped.
-
I have a windows xp media center and all of a sudden when I try to use the media center, I get an error 'code 3' I tried to do a few different dates on the system restore but it did not fix the problem. I also tried to find out which driver to restore or reinstall but I don't really know what driver to do. I know that is not under the modem or a printer, but after that, I'm lost. Any help that anyone can give me would be greatly appericiated. Thanks in advance. Trevor C.
Hello
1. What is the exact error message?
2 have you made changes on the computer before this problem?The following article might be useful:
You receive an error message "Failed to save component", an error message "Critical process failure" or a "Tuner not found" error message after you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005
http://support.Microsoft.com/kb/910905 -
Code 8007065E error when you try to install KB2385678
Original title: Security Update for Windows 7 for x 64-based systems (KB2385678) _
Windows HAS KB 2385678 update CODE 8007065E error
Hi peterdawes,
Follow the steps below:
Method 1: Open the Windows Update troubleshooting tool
To resolve the problem, run the Windows Update troubleshooting tool . He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.
Method 2: Installation offline
Download and save the Setup on your desktop package and try to install the same.
Download the update from the link below:
Update security for Windows 7 for x 64-based systems (KB2385678)
Gokul - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Pop up message - "Unable to burn an error has occurred" when you try to burn a DVD
original title: burning a dvd
Whenever I try to burn my movie recorded on a dvd, a window opens that know: impossible to burn an error occurd. So, what should I do to burn my movies on a dvd?
You can follow this link on how to burn your dvd...
If your windows media player is still having problems, try this...You can also try to do a SFC, -
Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???
I just burn a CD with no problem at all. Using the same type of CD, brand new, I tried to burn another CD and got this error message:
Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.
I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message. No idea why my CD-writer has decided to stop working for me?
Hi Cierrajade,
1. you have any third-party DVD burning software installed on the computer?
Method 1
You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.
For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.
Method 2
If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.
Disc burning: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions
Method 3
If the previous step fails, check if you can burn CDs using Windows Explorer
Burn a CD or DVD in Windows Explorer
http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Some sites have annoying formatting options. I know how to block sections of specific pages using an available for firefox add-on. What I'm looking for, some is to create changes in how a page and save it. For example, suppose that a Web site has a c
-
Someone has had experience in the programming of the NOR-6520 with CVI relay Board? I use CVI 2013 with DAQ 15.0. NOR-MAX shows the card installed and can access them through the Test Panel. I just need simple command lines to change the relay.
-
HP4500G510-M uninstall without a disk
I bought a new HP4630 to replace my broken HP4500. Have pop ups, bac/4500 Alumni APP and cannot get rid of it. I do not have the disk of the 4500
-
There is no error code after I press the delete key. The computer just hangs. I may have made adjustments to the software at any given time, but is not yet back from the point that I can't on BIOS the computer crashes on the first screen. Ideas on t
-
HP Pavilion dv7-6015tx Windows Edition home premium x 64 My problem is that my usb 3.0 ports do not work the only time where I can make them work is to power off at the wall for 5 minutes, but if I restart the pc after cela or even let him go to slee