Gettings error when you try to burn a DVD or CD
I am running vista and I downloaded the drivers for the driver but everytime I try to burn I get errors, nobody knows?
Try to remove the CD filters in the registry:
http://support.Microsoft.com/default.aspx?ID=314060
Tags: Toshiba
Similar Questions
-
Satellite L500-19 X - code error when you try to burn on DVD
Error code: 380381-26 - 2A 037303 when you try to burn to DVD.
Can anyone help?
Hello
What program you use for burning discs?
What operating system is installed?
What kind of blank DVDs you are using?To be honest, I can t say something about it and description of a sentence is too short in this case.
I advise to use high-quality Verbatim or TDK media. I have pretty good experience with DVD-R DVD + R media.
-
'Burning disc error' when you try to burn a DVD
Original title: I get the message "disc error" when trying to burn a DVD. I have recently restored factory settings and had no problem burning DVD previously. Any suggestions to fix this?
I have a computer laptop advent 9117.
Hi Adam,.
What is the full and exact error message?
I suggest you to refer to the article and see if it helps:
Error message when you try to burn files on a recordable disc in Windows Vista: "there was an error burning this disc."
http://support.Microsoft.com/kb/934544
Let us know if it helps.
-
Code 10 error when you try to burn cd/dvd
error __code 10
running windows 7 Home premium... gettig code 10 when trying to burn cd/dvd...can't can't find the part upper or lower filters... do I do...
Hello
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
4251 error when you try to burn a cd from itunes
When you try to burn a playlist from itunes, I get the error code 4251. Help! I have recently started doing this but have been using itunes for centuries without any problem.
Post in Apple's Itunes, forums. Google for them.
-
Pop up message - "Unable to burn an error has occurred" when you try to burn a DVD
original title: burning a dvd
Whenever I try to burn my movie recorded on a dvd, a window opens that know: impossible to burn an error occurd. So, what should I do to burn my movies on a dvd?
You can follow this link on how to burn your dvd...
If your windows media player is still having problems, try this...You can also try to do a SFC, -
Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???
I just burn a CD with no problem at all. Using the same type of CD, brand new, I tried to burn another CD and got this error message:
Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.
I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message. No idea why my CD-writer has decided to stop working for me?
Hi Cierrajade,
1. you have any third-party DVD burning software installed on the computer?
Method 1
You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.
For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.
Method 2
If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.
Disc burning: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions
Method 3
If the previous step fails, check if you can burn CDs using Windows Explorer
Burn a CD or DVD in Windows Explorer
http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Error when you try to burn a CD or DVD: burner not found
Burner not found
HP Pavilion Vista Edition Home Premium, version 6. All of a sudden, I can't burn cd/dvd. It says drive not found. Everything is linked, so I have NO idea what is wrong or what happened. Any 'simple', laymens in terms of help would be appreciated. (this will not work with Roxio either... same answer, burner not found)
HP Pavilion Vista Edition Home Premium, version 6. All of a sudden, I can't burn cd/dvd. It says drive not found. Everything is linked, so I have NO idea what is wrong or what happened. Any 'simple', laymens in terms of help would be appreciated. (this will not work with Roxio either... same answer, burner not found)
===================================
The following links may be worth a visit:(982116) your CD or DVD drive is missing
or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
(Windows XP / Windows Vista / Windows 7)Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsIt is possible that the reader has need for service or replacement.
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
No Media Player - codec errors when you try to play a DVD
Media Player will not play the DVD. It is a DVD. It keeps saying that I need to lower the resolution? Really, this cannot be more obtuse. In addition, please do not answer with the codec information, because these are TS DVD standard, not divx, avi files, etc.. If you do not know the difference, please answer. I doubt you can answer the question, but let ' see
Hello
- What is the exact error message that the OP is.
- Can you play the discs or videos using media even
Method 1: Let's run the game and DVD Burning, convenience store and check if the problem persists.
(a) click on start and then Control Panel.
(b) in the search box, type troubleshooting, and then click Troubleshooting.
(c) click View all, and then click on reading and burning CDs, DVDs and Blu - ray disc and follow the instructions.
Solve the problems of Windows Media Player video and other media or library
http://support.Microsoft.com/mats/windows_media_player_diagnostic/
Method 2: Try to reduce hardware acceleration.
(a) screen resolution open by clicking the Start button, tap Control Panel configuration, and then, under appearance and personalization, click on adjust the screen resolution.
(b) click Advancedsettings, the Troubleshooting tab, and then click on change settings.
(c) move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.
(d) click OK, and then click Restart now
Reference:
Windows Media Player Error Message help
It may be useful
-
Get the error when you try to burn Windows 7 pro disc: 0 x 8004005
I downloaded windows 7 Professional (download 2 GB) and when I click on "launch" said to insert the DVD to burn to the disc. I put the disc in, it gets all the way to the end and then gives me this error code: 0 x 8004005 so I can't complete installation. what I'm doing.
Download Windows 7 proper. ISO file
Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.isoAfter you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.
Create a Windows 7 Bootable DVD using the. ISO file
Engraving of a file of Windows 7 ISO on a DVD
http://support.Microsoft.com/default.aspx/KB/977640ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
It supports a wide range of image file formats, and it's free.
(BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
http://www.ImgBurn.com/Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
(The steps are the same, except that you do not create a repair disk but complete an installation DVD)Note: Always use DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.
= Upgrade to Vista =.
First run the Windows 7 Compatibility Checker
http://www.Microsoft.com/Windows/compatibility/en-us/default.aspxWindows 7 Upgrade Advisor
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15Here are answers to some common questions about the 32-bit versions and 64-bit Windows.
http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspxUpgrade Windows Vista to Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7clean startup in Windows Vista and try the upgrade to Windows 7
http://support.Microsoft.com/kb/929135
(The steps # 1 a, 1 b, 1 c, 1 d and 1e)Disable or uninstall your anti-virus software and firewall temporarily.
How to upgrade from Vista to Windows 7 Home Premium: http://www.howtogeek.com/howto/6892/how-to-perform-an-upgrade-from-vista-to-windows-7/
Upgrade Windows Vista to Windows 7 (custom installation)
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-customAlso: Windows XP to Windows 7 Migration Guide
http://TechNet.Microsoft.com/en-us/Windows/ee150430.aspx= XP update =.
Upgrade Windows XP to Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7How to move from XP to Windows 7 in 4 easy steps
http://www.MakeUseOf.com/tag/how-to-upgrade-from-XP-to-Windows-7-in-4-easy-steps/=============== Keyless Install ===============================
How to make a 'Keyless Install"of Windows:
Boot from the Windows 7 DVD disc, you create and launch the installation.
After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".You now have a 30-day grace period to activate Windows.
During this 30-day grace period you can try to solve your problems.
After you are satisfied with all the problems have been resovled then activate Windows.====================== Device Drivers =================================
Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.
If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersTips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problemsGraphics/video drivers:
Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us= How to activate Windows 7 by Internet =.
1) click Start and in the search for box type: activate
2) click on the 'Activate Windows' option at the top of the list
3) click on "now, activate Windows online.
(4) enter your 25-character product key (not case sensitive)
5) click "Next" and wait for the key must be verified.Another method - to reach a real person:
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxActivation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048J W Stuart: http://www.pagestart.com
-
Windows Media Player error when you try to burn a CD-80004002
Error code 80004002
I have problems with cd burning and I get an error code 80004002... What should I do?... I already cleaned the cd and they type of cd is that I used all the time. Also, when I went to windows media player I clicked web help and they said to choose a speed slower recording, but after that I clicked on burn and more options... I didn't know where to go from there... I don't see the burning rate box that they are at.
Hello1. what version of Windows Media Player is installed on your Windows Xp computer?Error 80004002/C00D10DA of Windows Media Player:
http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5230&ID=C00D10DA&ContextId=30&OriginalID=80004002
If you use Windows Media Player 9 or 10 refer to the article below to make the changes.
Method 1.
To select a slower burn speed:
a. in Windows Media Player, click Options in the Tools menu.
b. click the devices tab, and then double-click the name of the CD - R or CD - RW drive that you use.
c. click on the recording tab and select a write speed that is slower or is the slowest available speed.
d. click OK and then click OK.Reference:
http://support.Microsoft.com/kb/306319
Method 2.
If you have Windows Media Player 11 refer to the article below to slow down the burning speed.
Windows Media Player C00D10DA/80004002 error
http://Windows.Microsoft.com/en-us/Windows7/C00D10DA
I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Receiving the message 'Fatal Error' when you try to burn BluRay
I've completed a project of BluRay and I am trying to burn on a DVD. The process fine until it starts the burn process. The project is about 19g and I am ttrying to burn to a 25g BD - R bluray. It takes about 6 hours to go through the process. When the progress meter displays 100%, it goes into the process of engraving and after a few minutes, I get the message "Fatal Error" and it is she, not other messages and nothing written for the bluray. I find myself clicking on the "cancel" button which takes back me to the project.
Execution of the Elements 7.0 on Windows 7 with a lot of horses. Can give specifications if anyone thinks that this could be the problem. Is there a way to burn the HD project to the computer and then use other software to burn on my burner internal Bluray?
Use sharing/Personal Computer / MPEG with the 1440 x 1080 preset.
It should load right in DVD Architect Studio and give you great results!
-
Error code when you try to burn a DVD OSStatus Error = - 34
Any suggestions?
Not much on it.
Similar: https://forums.adobe.com/thread/1468841?q=OSStatus%20Error%20=%20-34
Mac OS error.
-
Windows Media Player help
I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error. I can't find a solution. Any Advisor. Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.
Hi Rains27,1. were you able to play the same DVD sooner?
2. must arrive with a particular DVD or all of them?
3. do you have a DVD decoder installed on your computer?4. you use starter edition of windows 7?5. What is the resolution on your computer?6. have you installed a codec on your computer?If you have installed a codec on your computer the I suggest you to uninstall the codec.
Method 1:
Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
Troubleshooting, click View all, and then click Windows Media Player DVD.
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
Method 2:
Play a cd or DVD in windows Media player
http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
Method 3:
Try to reduce the hardware acceleration again and check if it makes a difference.
a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
b. click on advanced settings, troubleshoot tab and then click on change settings.
c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
d. click OK and then click Restart now.For more information, see this link: thanks and regards:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
copy a group of photos w/music (Smilebox program) on dvd;
After following the instructions of SMilebox to burn "images set to music" on DVD, to the attempt of DVD playback, I got following error message: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. We live in the Washington area. I didn't know that DC was considered an unusual geographic region?
Hey nongeekbetty,
The DVD is encoded for a different region. Most DVD readers only works with DVDs that are coded for the computer was purchased in the same region. So if you buy a DVD in one country and then try to play on one computer from another country this DVD could not play.
Step 1:
Make sure that the DVD region is set to the appropriate region:
a. Click Start.
(b) in the search box, type Device Manager.
c. right-click on the DVD drive.
d. right-click on it and select Properties.
e. make sure that the region will be resolved.
For your information:
Step 2:
Also temporarily disable User Account Control (UAC) and check it out.
http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off
Note: Activate it once you are done with the check.
Kind regards
Savan - Microsoft technical support.
Maybe you are looking for
-
I just had two receipts for the same order, only one was prix.99 cents and the other was a price for 2.00 both for what I ordered, but I was charged twice. I want 200 concerts per month. Just one order, not two.
-
Problem of time system on Satellite M105-s3051
Hi all My satellite M105-s3051 has a problem in the clock. In the configuration, the seconds will not change. This isn't a rpoblem in the battery, because it saves the changes. When I go to windows, the windows clock assume it, but an hour before, he
-
WUSB600N ver2 &; OS Win7 32 bit
After that I installed on Win7 OS, I can't find the management of energy saving WUSB600N on Windows XP I can see it in the following path: Wireless Network Connection Status > properties > General > configure > advanced > energy saving Mode. PS: I in
-
Task Scheduler entry - OK to disable?
I would like to know if it is ok to disable the following items in the Task Scheduler? AD RMS Rights Policy Template Management (manual): "updates to the AD RMS templates for the user. This work offers a prompt for credentials if authentication at th
-
How to set the option for wrapping text in a textfield?
I want to put the text wrapping to the textfield property. When the text comes to the end and it must appear in the second line of the textfield. How can I achieve this. Please help me for this.